Spark plug install on 6th gen camaro 

Thanks brother!

Im glad it helped you brother 😁👍!

@@SUPSGARAGE also shared your video on camaro forum so this can help other people in need!

@@franciscogonzalez-oy2le O wow lol. Thanks alot for doing that. Hope it helps many more!

It should do the trick brother, just be patient with it 🙂

@@SUPSGARAGE yep, I was finally able to get them out using this trick. Even then, it took all the strength I had to pull them up, and sometime a crow bar between the pliers and the engine block. I actually destroyed one cable because the internal electrical connector was stuck to the plug so well that it just torn through the end cap. The rubber end cap came out, but the metal connector was still on the plug. Anyways, thanks again for the tip!

@Brian Rosenlof Glad it helped! but put some dielectric lube for this won't happen to you next time brother!

Thanks brother!

I agree with you on that brother lol Glad the video helped you 👍

I’ve been on it for a while bro this shit sucks 🥲😂

Glad it helps you brother!

thank you and go for it! that's what these videos are for 😁👍

Driver side is odd and evens are on the passenger side so 3 should be second one from the drivers side starting from the front of the engine brother

manuel says around 95k but honestly if it were me, I would do it every 60k or 5 years which ever comes first

@@SUPSGARAGE alright thanks bro🤝

40-50k miles

Once 1 goes out it’s best to do all of them.

7 is driver side rear. You can grab a diagram off google!

Should be 11ft lbs brother

The service manual says 15 ft lbs

I'm pretty sure you can, I was just afraid of ripping the boot.

@@SUPSGARAGE I just did it, took me over an hour it was a bitch to get to those rear plugs.. got oem ACdelco iridium plugs for $85 ... I had went to a Chevrolet dealer and they quoted me "$600" for the plugs and labor, I laughed and walked out

@@CamaroWarrior 🤣 well that's exactly why I do these videos brother to help yall out and save your pockets glad to know you did it yourself 😁👍

@@SUPSGARAGE and thanks for the video bro👍🏼

🤣!!!

haven't had the need to do that one yet lol but when I do I'll make a video of it as well

@@SUPSGARAGE I need to have spark plug wires installed

Here you go brother Check out this page from Summit Racing www.summitracing.com/parts/ado-41-114

I don't bother cuz I've done this many times brother but I would say it's best to if it's ur first time and you wanna play it safe

I only use it if the sparkplugs I'm installing do not have a washer if it has a washer then no hope this helps you!

@@SUPSGARAGE yes thanks

2 hours tops I would say bother

you tried using pliers on the metal part like I did at 1:18 brother?

@@SUPSGARAGE I eventually got them off. Had to use two hands to do it. I’m on my third one rn. Thanks for the video. Appreciate it

@jinso6100 no problem brother just take ur time 🙂👍

I say try it brother it's not as hard as it looks 😊👍

There no requirement to use it in the service manual