This is a walk through on the installation of the SPE 6.7L Intercooler. Dan and Ron explain some tips to help along the way. Product link : www.spemotorsport.com/collect... Learn more about the product : • SPE 6.7 Powerstroke Bi...
Thanks for the video but I have a question maybe you can help 2019 6.7 deleted and pipe kit install but now I get a p026a.Every video I have watched has showed a water leak but my tank is still full and no signs of leaks on the top of the motor or in front behind the grille The only thing that is different is the sensor that is in the cold side factory tube is not in the tube anymore any ideas
He says "some trucks, the power steering hose at the bottom here, will need to be zip tied down a little bit. Because it rubs just tiny bit on the power steering hose." That is not the case with my 2014. There is no way to keep the hose from riding against the intercooler. I removed the power steering hose, there is just under a half inch between the fitting on the power steering pump and the intercooler. We will see how long it takes to rub through the hose... For $2600 I expected a better fit. Maybe should have saved some money and went with a Mishimoto.
@@HSKFabrications maybe, but the cores are very different units. Given that the planned use for these is pushing high boost levels, that might be outside the efficiency range for the no limit cac. Maybe we can get some charts