Spinning Wheels With 30 000 RPM Electric Motor

Подписаться 759 тыс.

Просмотров 1 млн

50% 1

Small Plastic wheel and 28'' bicycle wheel Vs. 1.2 kw 30 000 RPM electric motor. Will the wheels explode or motor melt? There is also cool slow motion clips filmed with Chronos 1.4 high speed camera
Our filming gear:
Main camera: Panasonic GH4 with Lumix G Vario 14-140mm Lens amzn.to/2Ho5hQm
Handheld camera with stabilization: Olympus OM-D E-M1 Mark II + Olympus M.Zuiko Digital ED 12-100mm f4.0 PRO Lens amzn.to/2vFjt2h + amzn.to/2Hlt2bL
Gimbal camera / handheld 120 fps camera:Sony ILCE-6500 a6500 with 10-18mm Wide-Angle Zoom Lens amzn.to/2Kcpu9F
Gimbal: Zhiyun Crane 2 amzn.to/2K7wkNA
Drone: Phantom 4 pro amzn.to/2Hq8bA4
ND-filter pack for drone: PolarPro DJI Phantom 4 Pro Cinema Series Filter 3-Pack amzn.to/2K86xFj
Mic: Rode Videomic Pro-R amzn.to/2KbD4u0
Lavier mics:Rode Microphones RODELink Digital Wireless System amzn.to/2Kabayl
Audio recorder: Tascam DR-70D 4-Channel Portable Recorder amzn.to/2Ho2aE7
High speed cameras: Choronos 1.4 high speed camera with 16 gb memory www.krontech.ca...
Action cameras: GoPro HERO5 Session amzn.to/2K9kpyZ + Olympus Stylus TG-Tracker 4K Action Cam amzn.to/2vFeAWM

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,5 тыс.

@Beyondthepress 6 лет назад

If you have suggestions for things to explode next OR for better motor please let us know :D I will at least explode some large grinder disks on next video to see how dangerous they are when mounted to fast grinder, with some ballistic gelatin off course :D

@peterzingler6221 6 лет назад

Add two gears and bring that thing to over 100k that will explode everything

@zippymax1 6 лет назад

HOLY SHEET THAT WAS FUCKINK AWESOME!

@m-m8835 6 лет назад

Possibly an air tool may work in place of the motor

@RandomNoob 6 лет назад

You should have pulsed the power on initial startup as to not burn out the windings once sufficient speed is gained then it would have been ok

@bigblackspiderx5069 6 лет назад

Make a system to release the wheel, and let it go away into the wild xD

@iakwbosnomik8622 5 лет назад

I seriously want to see this bicycle wheel ripping apart. Like for part 2!

@TempoDrift1480 5 лет назад

Iakwbos Nomik same!

@riner9 5 лет назад

They just need to accelerate slower

@namewarvergeben 5 лет назад

Or use a pneumatic or hydraulic motor

@wb5mgr 5 лет назад

If they had spin started the wheel the router would have been ok. It could not survive the startup load.

@wlan246 5 лет назад

The problem was that the motor was generating a lot of heat due to the load, but wasn't spinning fast enough for its internal fan to cool its windings adequately. You might rig up a leaf blower to force air through the motor to cool it when it's running slow under high load.

@1one3_Racing 5 лет назад

"When the smoke is out it won't work" I wish all the kids in the world could learn this valuable lesson.

@revolution5547 4 года назад

But its not like that allways

@wernerbloemwagen6878 4 года назад

Because it works with smoke - when the smoke comes out it cannot work anymore

@revolution5547 4 года назад

@@wernerbloemwagen6878 hahahahahhaa ur hilarious what a comedian

@wernerbloemwagen6878 4 года назад

@@revolution5547 : it's an old joke Revo regarding electrical equipment - strange you haven't heard it before ánd one that he actually made during his video - listen again carefully and you'll pick it up.

@revolution5547 4 года назад

@@wernerbloemwagen6878 thats why i said "ur funny" cuz u use old not funny jokes

@colerakocy2250 5 лет назад

9:17 “all electric stuff works with smoke and when smoke comes out it doesn’t work” lmao

@peterzingler6221 6 лет назад

I think best way to high RPM and torque is a burshless setup running on 4car batterys , you can get 1-3kw brushless RC Motors pretty cheap from china

@tommihommi1 6 лет назад

Large lipos can do way more current than car batteries

@peterzingler6221 6 лет назад

@@tommihommi1 maybe but not for a resonable prize . 4 car batteries will give you over 50v with a max oft 400amps without getting hot or shir

@JGnLAU8OAWF6 6 лет назад

That is the best idea, plus they would have remote control.

@Speeder84XL 6 лет назад

That would be really nice as well. Those also don't have the start up problem that you have using a power tool as motor. The motor and gearing in power tools isn't designed to start with a heavy load on them. So if you just apply full mains voltage from a stand still, the heat loss will be huge and the motor heats up a lot before the wheel get up to speed. For the brush less motors the controller apply a low voltage (and low frequency) from start, then gradually increase. That means they will heat up much less. Then when the wheel get up to speed they will also have the power to get up to high RPM

@MT-THNDR207 6 лет назад

Buy the Turnigy Super EDF motor. Max rpm is 30,000rpm. I have it in a rc plane that can go 200mph.

@frasersteen 6 лет назад

look at some of the rc brushless motors. you could easily get a setup that would do 10k rpm and a couple of thousand watts

@CrazySnake5000 6 лет назад

My old 1/8 brushless motor is rated for 60000rpm if memory serves.

@frasersteen 6 лет назад

I was thinking a heli motor, some of them are good for 10kw and have a pretty low kv.

@niklasxl 6 лет назад

send it to AvE for analysis :D and try to put a wheelbarrow wheel on there :D

@panzerveps 6 лет назад

It let the smoke out!

@niklasxl 6 лет назад

yes but there are multiple things that can make it let the magic smoke out :D motor, control circuit, trigger, cabling and so on :P

@Basement-Science 6 лет назад

chinsy windings let the smoke out, no doubt. This machine probably has no electronics at all in it.

@Basement-Science 6 лет назад

toilet brush in this case it had nothing to do with epoxy, but just with the thickness of the windings and the lack of a thermal switch. Epoxy etc can help against mechanical load, such as vibrations, making the tool last long when used "normally".

@TimPendleton 6 лет назад

I would love to see AvE dissect this with his amazing bumblfuckery to see whose theory is correct.

@ottarkraemer9001 6 лет назад

Of course the experiment failed when you actively removed Safety Officer Nelli! ;)

@Beyondthepress 6 лет назад

What a rookie mistake for us :D

@AkerCW 6 лет назад

Why is there a sticker in ur name?

@MBUncle 6 лет назад

Maybe go nuts with the idea. A very powerful motor vs bicycle wheel, cart wheel, even full size car tire. Sky is the limit at BTP !

@lachlanhatcher9108 6 лет назад

The sky is the limit... Hmm, but what if you send the fragments into orbit? XD

@Sharpless2 6 лет назад

what if you give your motor unlimited energy, then some cosmic mumbo jumbo happens and accelerate's the fragents into orbit, to escape velocity, galactic escape velocity, and then get caught in Messier 51?

@dockmasterted 5 лет назад

In America it is called a router (used for cutting groves in wood)

@gingermanc 5 лет назад

In the UK it's called a router too

@moestrei 5 лет назад

Australia down under as well

@snikwad003 5 лет назад

I think I am going to start using the name "wood machining thing"

@dockmasterted 5 лет назад

@@snikwad003 That would cover a hole bunch af wood working tools eh. ..... but you wooden't be wrong lol.

@Snagglepuss1952 4 года назад

In English that tool is a router, or in your case a smoke machine lol. Cheers from NZ another smile on a dull day, thank you.

@JTThumpington 3 года назад

Somebody has probably commented this already but have you considered using a variac to slowly increase the voltage supplied to the motor? That way, you could get the thing moving first without drawing such a large amount of current and overheating the motor. **EDIT** Yes, Paul Liu suggested it two years ago. :-D

@hang3xc1 5 лет назад

"The main problem was the smoke came out of here" LMFAO

@gotnoshoes99 5 лет назад

Ha Ha "it's not alright any more".

@meehow3694 5 лет назад

Hey!! You’re the “hydraulic press channel” guy. Lol. Finally see a face

@readysetsleep 6 лет назад

As a cyclist I hope you could compare Loose bearings vs Sealed bearings vs Ceramic bearings.... Also show us the proper way of pressing in bearings into bicycle hub, So much hack work out there with hammering them into place.

@Dwarf19864 6 лет назад

Omg.. exploding bearings would be so insanely dangerous that i just love the idea ^^ @HPC would have to get like decent motor and i'm pretty sure it would require some kinda gearbox magic to get bearings to explode, but it would be so awesome... they would also need an actual remotely controlled launcher, since the bearing balls wouldn't have any problem penetrating a human.. :)

@markbeiser 6 лет назад

Good to see another "Smoke Theory of Electricity" proponent out there! ;)

@kilppa 4 года назад

I know this is an old video, but you could try jacking up a car from the driving end and spin a back wheel of a bicycle to some crazy speeds with right gears. The problem there is the is that transmitting the power would likely break whatever linkage you manufacture in between, if it's just a bicycle chain or similar. Worth a try, though. It will make a wonderful mess worth shooting, though. The positive side of that is that you could slowly bring it up to speed with the gas pedal, but you really have to make the car bullet proof before that so that you don't get yourself killed while doing that.

@devin197601 5 лет назад

Never let the magic smoke out 😜

@blue04mx53 3 года назад

The router is only designed to spin a half inch shank attached to a 1 inch router bit. And both of those are balanced for high speed. So, the bearings could not handle the 'wobble'. You need a way to isolate the fragile router bearings from the wobble of the bicycle wheel. Perhaps something like a belt drive?

@tomrandall4871 5 лет назад

When you get a new motor that has brushes a universal tool motor get a ac veraic it is a adjustable ac auto transformer. Then you can start your motor at 10% and adjust up to 100% allowing the mass of the load to spin up without burning up your drive motor. The variac come in 120 volt ac 50 / 60 hz. At one time they had a 240 ac model as well. Good luck! Note: you will need a 2400 watt variac for your 1200 watt motor. Since universal motors can run dc you could build a scr driver speed control (giant light dimmer) or if they are still available a adjustable speed controller for shop tools.

@Altruistic-Viking 5 лет назад

Ohhh no you let out the magic smoke 😳😆😆

@salmonline 6 лет назад

OH NO!... It's you! Hi you guys. love your other channel. Did not know about this one. Most excellent!

@Turboy65 4 года назад

Get a variac with a current meter on it. Crank up the speed without over-amping the motor and you'll get it up to a higher speed without damaging the motor.

@petehiggins33 6 лет назад

In the US and the UK that's a cheap arse router pronounced rowter (ow as in cow), but in the UK a Wi-Fi router is pronounced rooter (oo as in root). Don't ask me why, it just is.

@benketteridge9150 6 лет назад

Wi-Fi router is derived from 'route' as in routing traffic. This word is also pronounced like 'root' in English and mispronounced like 'rout' in American. The tool is a router (rowter) which is derived from 'rout' - which is the cutting action the tool performs and also the word for when an army is utterly defeated and flees from the battlefield.

@petehiggins33 6 лет назад

According to my dictionary, the tool is derived from the word 'root' via the rooting action of pigs and generally hollowing or digging stuff out which makes its pronunciation even more confusing. It's always a mistake to expect languages to be logical.

@benketteridge9150 6 лет назад

@@petehiggins33 especially English!

@romaliop 6 лет назад

Main problem is that the English pronunciation changed a few centuries ago, but the spelling didn't. Second problem is that there aren't enough letters for all the sounds English uses. So if English people are retards it's probably because so much of their brain capacity is already occupied by the obscure spelling rules.

@Chrishelmuth1978 6 лет назад

@@benketteridge9150 who's to say what's mispronounced? The English language has borrowed words from Greek, Latin French, etc, and all of them are "mispronounced" when compared to the original. And... then there's the 13th element. It's aluminum, unless you want to sound pretentious to non UK people and say aluminium 😉 Honestly, I think in many instances British and American English are almost completely different languages...

@nagarajms840 3 года назад

Afther heearing youu Now my engalish is prethy justh like youur engalish... Nice...

@noahpeszel168 3 года назад

I've seen videos on bicycle wheels turned into propellers for windmills could you make one using fiberglass or carbon fiber insted of duck tape and try to see how well it holds up under high RPMs and if it will be good for an ultralight aircraft of some sort

@adamdelarozza1985 3 года назад

He speaks better English than some of the hommies i know that live here...LOL

@Telephonebill51 4 года назад

If it will work that way, use a motor speed control to allow the router to slowly overcome the inertia of the wheel's mass. it normally goes form a dead stop to 30,000 in just half a second or so. This longer time delay was too much and the amperage burned up the motor.

@AJ-ku7nm 5 лет назад

Get a bigger motor don’t give up!

@jhiggz9258 5 лет назад

Great video. Loved it. Maybe a slower startup with a Variac (variable transformer) would prevent the burnout of the motor.

@optroncordian7863 4 года назад

Add a regulator to limit the power to the motor. Start with small value around 10 percent and gradually add as the wheel gains speed. That way you will prevent overheating while the rotor is rotating slow, when the cooling fans do not have effect yet. I would really like to see the bycicle wheel exploded! :D

@R3cKi7 5 лет назад

Did your jeans get caught in a previous video? lmao

@GUSftw 5 лет назад

you need to get yourself a smoke reintegrator machine. it puts the smoke back in to fix electronics.

@wvoyles 5 лет назад

made me spit out my coffee lmao

@stinkyfungus 5 лет назад

"Wood machining thing" in english is called a "router" R-ow-tur. Also, your English better than many people who were born here... don't let anyone tell you different. Press on!

@CryptoDatabase 5 лет назад

your English is better than most of the people born here*

@guy_incognito7538 4 года назад

@@CryptoDatabase the original post was actually correct ya douche

@John_cupra290 5 лет назад

Another interesting video 👍🏻

@Volvith 5 лет назад

I think a high torque electrical motor with belt transition would probably have worked better than a wood-mill.

@FM-mj8pr 5 лет назад

A steal bar triangle might hold strong 💪🏼 🤓

@mama123mejill5 5 лет назад

The wheel does not explode but the motor yes 😂😂

@goldenpun5592 3 года назад

Had to watch the video of the wheel exploding twice because I was too busy _Banging my fucking head_ to that absolute ripper of a soundtrack.

@denzzlinga 5 лет назад

You need a much bigger motor to overcome the arodynamic drag created by the spokes of the bicycle wheel. Try a stadard industrial motor, 3 phases 400 v and like 15 kW. It will only make 3000 rpm, but that would be 100m/s and 360 kph with that bike wheel, maybe that´s already enough to destroy it.

@thugasaurusrex6004 5 лет назад

Yea was about to say lol you should have hooked up a variac to the motor instead of just running at full.

@shananagans5 5 лет назад

It would take some work & fabrication but a car tire would be interesting.

@snoozinghipo 5 лет назад

Do it again with a bigger motor... and do it with a car wheel!!

@wishusknight3009 5 лет назад

Would a circular saw work? I think they have some form of gear reduction, yet still spin fast enough to kill a bike tire

@ramiel555 6 лет назад

maybe some big-ass angle grinder might hold up better, but I'm not sure either way, bike tire must DIE :O

@cpufrost 6 лет назад

Build a wheel with cupped spokes that catch air. Then use high pressure air from a bunch of SCBA cylinders in parallel. It's amazing how fast you spin things in this matter. 30k RPM will seem slow! 400k is not out of the question. On something larger than 2cm diameter however you're talking kinetic energies that can be lethal for 100s of meters without protection.

@DAVIDGREGORYKERR 6 лет назад

What about using a 3 phase motor out of a washing machine should be able to make short work of that Bicycle wheel

@jeremiahsmith6689 5 лет назад

use a simple cvt transmission like on the racing go karts to better transfer the torque needed

@kennethgray2003 5 лет назад

I won't be coming back to watch these guys. They let a bicycle wheel get the better of them.

@footloose6382 5 лет назад

Some decent rockets mounted on the periphery Catherine Wheel style might be fun, especially if the wheel could be launched at max rpm....

@SeabornNomad 6 лет назад

I believe good sir, that wood working machine is a router.

@phoenixarian8513 3 года назад

Sorry but despite that bike wheels are not designed for operations at 75 mph, that speed is achieveable by going downhill. Some stuntman love these actions. They will not explode. You need to go faster to explode it!

@loosi 5 лет назад

Smoke is an essential part of every electronic! If you let it out of the electronic it wont work anymore.

@zapfanzapfan 3 года назад

Can't put the magic smoke back! :-)

@snooganscientist 3 года назад

Use a variac to get it up to speed slowly to save the motor

@albertl3776 5 лет назад

maybe if you could have toggled the electricity to the motor on and off to have it on one second off 3 seconds, on one second off another 3 seconds to get the speed up and allowing the motor to cool for 3 or more times longer than it was on maybe it could have got the speed up to destroy the wheel without damage to the motor?

@scrambledmandible 4 года назад

I'm sure you've been told before, but that's a router (not the networking device)

@brandoncalin8183 5 лет назад

Maybe try to get the wheel spinning before starting the power tool.

@heyidiot 5 лет назад

I think I would have parked my car (3:46) somewhere else. "We're gonna need a bigger router..."

@chadfabian3143 5 лет назад

5 months later still no new video

@Endless_Skyway_Adventures 6 лет назад

You would actually take the router back after you destroyed it?

@nathan100tz 5 лет назад

I was going to suggest you soon your jeans next but looks like you already did them.

@Gw0wvl 5 лет назад

With a small smoke canister you could refill the Router and it would be good as new 🤣

@Unklescam 5 лет назад

Lmmfao

@jayknight139 5 лет назад

Ha haaaaa!! Was he joking

@Georgehanes-GJH105775 4 года назад

It needs to ber magic smoke, so you'll need to get it blessed or enchanted depending on the manufacture's specs.

@mikecole2023 4 года назад

You are stupid !!!!!!!!!

@josepeixoto3384 3 года назад

Yeah,but no china smoke, you need to put back in, the *same* smoke, or a factory made new one; it comes packaged.

@xIronPigx 5 лет назад

I think you should’ve given the bicycle wheel a good pre-spinning by hand before plugging in the router. That way the tool wouldn’t have to labor so hard just to get it moving and use up all of its smoke and fail.

@droidnick 5 лет назад

What the hell is all this smoke talk ..lol. there is no smoke in a motor...

@xIronPigx 5 лет назад

dominic bender there is too smoke in a motor. That's how you know the motor has failed. When you let the smoke out of it. In fact at 7:42 in this video is when he starts to let the smoke out, and the motor begins to fail. He even talks about letting all the smoke out at 9:00.

@Sivertsen3 5 лет назад

I doubt it would help. The two issues that cause the motor to fail at low rpm is drawing too much current through the motor windings and reduced cooling from the built in fan running too slow. Even at 1000 rpm it's spinning at 1/30 of the designed speed.

@justinmartin8887 5 лет назад

Well it is technically melting the brushes and turning them into smoke, until the poppet popped in the brush, so you’re right in a way

@BrianBell4073 5 лет назад

@GardenasFinestSGGC - Electronics run on smoke as well. Trust me. If you let the smoke out of anything electronic it stops working. (OK - It is a long running joke. Either you are a 6 year old with no sense of humour or you are actually the stupid one.)

@lsxmatt 6 лет назад

This channel is always doing some crazy, pushing the limit, mythbustery shit.. And I like it👍

@michaelsandell4688 6 лет назад

I explained it to my father as "Like Jackass, but in Finland"

@purge98 6 лет назад

It's his Spanish accent.

@chopperkid19 6 лет назад

@@michaelsandell4688 so a mythbusters version of the dudesons

@huncho9225 6 лет назад

chopperkid19 F

@LPJMagicmusic 5 лет назад

@@michaelsandell4688 jackass? They don't hurt themselves. Its the furthest thing away from jackass.

@captainheat2314 6 лет назад

hook a variac up to the motor and ramp it up slowly so it doesnt burn out but still get high RPM

@MushookieMan 6 лет назад

Do you watch the Photonicinduction channel?

@downhilltraveller 6 лет назад

Captain Heat I had this exact same thought. The infeed current is burning the windings up before it can even spin fast enough to cool itself.

@teardowndan5364 6 лет назад

While a variac may limit the motor's stall current, the motor is only designed for high RPM and the light load of router bits. At low low speeds, the motor's cooling fan is ineffective and the motor may still overheat during the power-limited acceleration from lack of airflow.

@MrBugsier5 6 лет назад

its due to the high amps at starting, the windings are just to small to handle the current over longer time, the cooling fan wil not help in this case.< its a series motor, build for high rpm, the higher the rpm, the lower the current it draws.

@williamleinonen4888 6 лет назад

I agree with this suggestion

@dj_fission 6 лет назад

I love the "magic smoke" concept, we talk about it all the time at work :D

@Beyondthepress 6 лет назад

Yep :D I thought that there would be somekind of heat shield on machine like this but no :D

@bossev 6 лет назад

No smoke - machines don't work.. Simple rule!

@CrashTestCoder 6 лет назад

@@Beyondthepress there kind of is, but it only works at high speeds

@Graham_Langley 6 лет назад

Pity you can't get the refills any more.

@Wilson84KS 6 лет назад

One of the best jokes ever and he described it just perfect, love it 😂

@coryknight7669 6 лет назад

8:56 if you let all the smoke out of the motor it won't run mechanics 101

@michaelbamber4887 5 лет назад

You can buy smoke in a can so you can refill it but next time will only run on 415v🤣👍

@teampython3134 5 лет назад

When he said that I legit slammed my head on my desk... Kinda hurts now.

@tube71000 5 лет назад

@@teampython3134 Me too, because they should have had an original magic smoke refill (en.wikipedia.org/wiki/Magic_smoke#/media/File:Magic_smoke_refill_(5990429717)_(2).jpg) from IBM (where magic smoke was invented) at standby!

@72troy455 5 лет назад

+Michael Bamber Best smoke comes in bags...

@xmun9236 5 лет назад

As an electrical engineer his smoke theory is the stupidest thing i have ever heard related to electrical stuff

@mitsuevo8mr 5 лет назад

Next time try using premium smoke instead of regular smoke!! and make sure the smoke cap is really tight!! don't let the smoke out!!!😁😁😁

@Floris_VI 5 лет назад

😂😂😂

@youtube.commentator 3 года назад

Underrated

@darwinenthusiast3039 6 лет назад

Lauri!? I didn't know you would quit this easily! You guys can't let the bicycle tire win! You must deal with it!

@Sharpless2 6 лет назад

it could attack at any moment!

@awesomeferret 6 лет назад

It's genuinely shocking. You know he has a variac somewhere and you also know that he thought of using it, but he didn't for some reason. Follow up video maybe?

@Millyy15 6 лет назад

"I'm not going to do like boring safe stuff like slow-mo guys" LOL Shots fired xD

@johndowe7003 6 лет назад

they do suck tho xD htp are the only big channel thats not a sell out and i like that

@Christdeliverme 6 лет назад

HAHHA

@Christdeliverme 6 лет назад

I was reading through these comments and he said this the same time I read this. It was great.

@heideknight9122 6 лет назад

Hasn't been watching them has he. Some of their videos are quite explosive.

@USS_ESSEX_CV-9 3 года назад

The thing was slow Mo guys versus hydraulic press Channel and Beyond The Press is slow Mo guys do 99% of their recording in a backyard, so they pretty much have to do stuff that is relatively safe because there's a lot of people that live near them. these guys however live in the middle of freaking nowhere, so they can do stuff that's a little bit more dangerous because of her projectile goes flying say 100 some odd meters it probably won't hurt anyone in any way because they either own that land or no one owns that land. Think of it like demolition ranch, Matt has a huge ranch that he owns which is why he can afford to do all that really stupid stuff because that's his property so if someone gets hurt then they shouldn't have been trespassing. It's a similar thing with these guys

@unm0vedm0ver 5 лет назад

3:27 "...and then we go hella... far away" Hella has spread as far as Finland. Hella can't be stopped.

@jedinutcracker 3 года назад

well they do have " *hell* -sinki" so it was only a matter of time

@blipco5 5 лет назад

It's a router. EDIT ... It WAS a router. Thanks for the laugh.

@AJB2K3 6 лет назад

"Unfortunatly all the smoke is out and electric only works with smoke." ROFL, I like that.

@SamuraiJACsr 6 лет назад

Spin an entire car until it explodes apart. Or a piano. Spin a piano until it explodes.

@Sharpless2 6 лет назад

Lmao. Im sure spinning a car until it explodes isnt easy, but its doable. Somehow....

@huggywuggy3608 6 лет назад

Andy Crowley Sr. your acting like a junior not a Sr.

@Sharpless2 6 лет назад

@Skum Dum youre*... Whats so wrong about that? Afterall, its a username.

@huggywuggy3608 6 лет назад

Dead Meme I wasnt talking to you dead boy.

@Sharpless2 6 лет назад

Skum Dum goo.gl/GJ1DS7 did you just assume my gender? wrong smfh so much trump in 1 comment.

@gordonlawrence4749 5 лет назад

Unfortunately you are not going to be able to spin a wheel that size up, as 30k RPM would mean a tyre speed of about Mach 3. 1kg of material at that speed has 1MJ of kinetic energy. IE in a vacuum it would take a 1000W motor near 17 minutes to spin it up to speed. A normal bike wheel is more like 2.5kg assuming 700C and 25mm tyre with all steel construction. That would mean more like 3/4 hour. Even at 75m/s we are talking 14kJ kinetic energy which is only a little less than an M107 12.7mm muzzle energy. Basically if it hit your arm it would not just break it - it would take it off and 20mm plexiglass would be about as effective as fog in stopping it. So please be careful.

@franciscagarayotero2743 5 лет назад

Excelente analisis

@stinkyfungus 5 лет назад

@@franciscagarayotero2743 Yes, but he should do it anyway. Because science

@aidangutierrez5736 5 лет назад

Oh ya I get it totally

@AffordBindEquipment 5 лет назад

Great explanation! Maybe help the wheel up to speed with another motor rubbing against the tire and then turn on the router. Or try a 1hp 3450RPM motor to see the results. THis is another example that electrical things run on smoke. let the smoke out and they quit.

@banderfargoyl 5 лет назад

Plus the wheel would have to be amazingly balanced to reach even 1000 rpm.

@grandmothersapplepie 5 лет назад

You need a variac, gradually increase power but not to full power. wheel should self destroy before 50% power. This Router machine is a high rpm motor and not cut out for low rpm high torq.

@MegaDicksplash 4 года назад

TIYL4W sounds like he got a variac on it or some kinda dimmer...!!!!

@imbok 6 лет назад

Maybe you guys could build a transparent barrel to subject things to high levels of centrifugal force? Think of what cupcakes or blueberries or bananas would look like under 40 or 50 g's !

@alessandro5693 6 лет назад

YES!!!

@MittyNuke1 6 лет назад

Great idea! It might be hard to design an axle that holds on to soft objects like fruit for long enough to make it interesting, though.

@roidroid 6 лет назад

I think this is how Finland fought off a Swedish invasion hundreds of years ago. And still to this day, Swedes have an instinctual hatred of barrels.

@coder0xff 6 лет назад

Centrifuge press channel! Great idea

@freevipservers Год назад

Old comment but someone did this with a lawn mower and got like 1500 g's lol, search on yt lawn mower centrifuge

@najken 6 лет назад

Instead of connecting it straight onto the router, perhaps have a few pulleys and gear up another electrical motor, then there is some slippery on the pulleys to get the bicycle wheel going fast enough. Nice try though! try a go cart wheel, and a kids bike wheel perhaps?

@alextegg3838 4 года назад

I did laugh at ‘now we have to take it back to the shop and say it broke’!

@worldtraveler930 3 года назад

Hay, Harbour Freight did say that it was guaranteed! 😃

@KingTen91 4 года назад

Your backyard looks like a backyard in Tennessee or Virginia, I love it man

@KronosIV 6 лет назад

'Router' in American English.

@zippymax1 6 лет назад

Bah...i thought i was first.

@miraflynn8935 6 лет назад

I might add *handheld* router, cuz I've seen table mount ones that look totally different but are basically the same thing

@chriswillans6776 6 лет назад

A "router" in British English too!

@smokeydoke100 6 лет назад

And a nice one too.

@mrsideperson8405 6 лет назад

No router is that internet thingy ;)

@timjs1018 6 лет назад

SUGGESTION The majority of the damage to the motor is the current draw when its starting and at low speeds. Set up a stand next to the wheel with a leaf blower to pre-spin the wheel somewhat and the motor may survive round 2.

@knifejames8163 6 лет назад

Thats what i was thinking. And possibly use the variable speed on the router. Start it up slowly. Could be done with a light dimmer?

@orbitaljellyfish808 6 лет назад

👍 The cooling system of the unit probably only works well at near full speed, so after spinning up with leaf blower leave it on and force air through the router to keep it cool. Better yet use compressed air if available.

@austinallmond7211 6 лет назад

@@knifejames8163 good luck finding a dimmer that can handle that much current. The triac in the router was getting a workout as it is.

@CatNolara 6 лет назад

It's not only the weaker cooling of the fan, it's the lack of back-EMF at low speeds, so you get more current than you would at full speed. The inertia is too much of a load then.

@GrulbGL 6 лет назад

yep, around 3 times at start.

@belperite 5 лет назад

There are but two classes of people on earth who can pull off those sunglasses as a look. Finnish people, and Jeff Goldblum.

@speedybbg36 5 лет назад

If the small weel has a diameter of 30 centimeter it destroyed at 380 km/h or 236 mile/h

@Nograc_ 5 лет назад

I love you😂

@riusaldregan 6 лет назад

I love how quickly you get to the cool stuff; there's hardly any filler or nonsense going on in your videos. I can still remember seeing your first HPC videos linked on Reddit, really cool to see how far you've come =)

@GumbootZone 5 лет назад

"An electric wood machine". I need one of those.

@paulcapocasa4416 6 лет назад

You should have gone to another hardware store and bought a new bag of smoke then you could have filled it up and tried again..... 😂😂

@SamuraiJACsr 6 лет назад

HA! I was thinking the same type of thing.

@paulcapocasa4416 6 лет назад

@@SamuraiJACsr LOL....Looks like I only just beat you to write it in the comments. No hard feelings? 😁😉

@mrpandabites 4 года назад

"All electric stuff works with smoke, so when the the smoke gets out, it doesn't work any more." Solid science.

@stephenbenner4353 4 года назад

There is a saying amongst American electricians regarding motors: “Don’t let the smoke out.” I’m not sure if it translates well to Finnish.

@kevinsnell1622 6 лет назад

Take the reflector off the bicycle wheel to help balance.

@Rubensgardens.Skogsmuseum 6 лет назад

Actually I used the reflector to balance my bicycle wheels. And then a small led weight.

@cameronwebster6866 6 лет назад

It depend on the wheel, some it helps and some it doesn’t.

@flaplaya 5 лет назад

Wow I'm on a stupid video. Thanks for the warning of my wasted time.

@TechMasterRus 5 лет назад

First, I thought the same. But then, I realized that no need because the router can't survive such load at low speed. And it did not.

@stevenormandin2059 6 лет назад

yep you need at least 6 or 7 kw of power to overcome the air drag from the spokes of the wheel and you don't need 30k rpm motor one that spin around 8k to 10k rpm will be more that enough to destroy it for that matter a big angle grinder like a 200mm size grinder will do and you wont need more than about 1.5kw of power to spin it still was an interesting video :)

@punker4Real 6 лет назад

he got it to 70MPH not too bad

@Sharpless2 6 лет назад

what if you get something that needs over 20k rpm b4 it explodes? then a 30k rpm motor would be nice. He should get 2 motors with different RPM lol

@jostieleman1649 6 лет назад

A engine from a car or motorbike will be powerfull enough. 6000 rpm, wheelspeed 200 m/s or 720 km/h.

@TexasGTO 6 лет назад

You owe us an explosion! lol

@billl605 5 лет назад

Marvin martian would be beside himself.

@abrahamestrada2206 6 лет назад

Put a lawnmower blade on it and toss fruit in it in slowmo

@franzferdinandgarcia1205 5 лет назад

hama traba i think you're suggesting in wrong channel.

@dickpump4682 5 лет назад

You’d be better off with using a lawnmower lmao

@jeffmoore3126 5 лет назад

Could somehow use the lawnmower to spring the bicycle wheel

@averageyoutubeuser1175 3 года назад

Lol 69 likes

@4gauge10 6 лет назад

Lauri/Annie,that motor"device thingy"in English is called a"ROUTER".

@cheeto4493 6 лет назад

and pronounced like cow - ter. But I would have liked to hear his pronunciation of it.

@Graham_Langley 6 лет назад

cheeto4493 But only in this case. If it's a router of the network kind it's a 'rooter' - unless you're USAnian or in Australia where rooter/rooting refers something else entirely...

@godfreypoon5148 6 лет назад

+Graham Langley yes, a "rooter" had best not "root" the network here.

@Slipperypotato365 6 лет назад

Put a Stretch Armstrong toy on their spin him around see how far he expands

@Saareem 6 лет назад

YourFace Calm down a little. It is entirely possible for two or more guys/gals to come up with the same idea independent of each other.

@tescovaluerice7321 6 лет назад

@YourFace electric motors run on electric.

@Deadrider100 6 лет назад

Spin one of those round sawblades yo

@MikeL-FL 6 лет назад

Isn’t that what a circular saw does??

@Deadrider100 6 лет назад

@@MikeL-FLYeah, but make it faster!

@christophersolesbee 6 лет назад

As opposed to the square sawblades

@godfreypoon5148 6 лет назад

I spun one of those spherical sawblades, yo, it fucked shit up in all kinds of ways.

@antoniolen-rios8482 5 лет назад

The problem is that you tried to spin the big wheel too fast and it put too high a load on the router (router is the English name for that machine. For big wheels you will need to start slowly and build up speed slowly so as not to strain the router too much.