SPRAYING A NEW APARTMENT WITH THE GRACO 190PC EXPRESS 

Bro this is so good! You going out on your own, buying your first graco🙏 the 190 is my personal fav. Awesome little machine💯 I appreciate you watching for so long! Respect

Thank you Josh. I need your help here mate,which would be the best sprayer for spaying windows solvent base.?

💯 percent brother! Good little machine 🙏

Same here. Last day of employment was today. Learnt loads from this guy. Start my business monday

Thank you much for your kind words. This is why I started this channel to help others. Good luck on your new adventure and I'm sure you will do great. 🙏

@@kieran9 appreciate it brother. Good luck and always here to help 🙏

@@paintingbyjosh cheers Josh. It's a great channel because I am in Christchurch Nz. Most other videos are American so the products don't relate. So what you're doing is a massive help to me, also many others

@@kieran9 yeah there's definitely not much for us Aussies/new Zealanders out there mate. Good to relate with the products and information what are available for us💯 thanks mate. much respect 🙏

Respect mate. Appreciate you watching 💯🙏

Thank you🙏🤙

Agreed mate 👍

Thank you! Yes it Dulux Total Prep. 💯 about the back rolling

No sweat brother! Yeah ita great machine, definitely better then the Wagner

Thank you legend I appreciate the kind words 🙏 nothing but respect. Yes I usually do run a whip hose definitely gives more control 💯 cheers for watching on 🤙

Thank you 🙏

Thank you 🙏

Hold me for ransom till your new house is painted you reckon🤣 yeah it's much easier with the sprayer but there is much more preparation involved also, sometimes it can just be as easy doing it old school. Good luck with it all. Keep me updated!

@@paintingbyjosh 😏

Thank you 🙏

Respect 💯

Hi Les, I apologise for the late reply! Yes I spray finished using the Fast finish after I undercoated everything with the 1 step prep. I spray my trim finished when cut & roll my final coat 🙏 cheers

I have been spraying this way for 24 years not one's have I seen paint coming of bare gyprock/drywall that I have painted. All my walls a primed first maybe it's the product or you putting water in the product is the problem. It's like cardboard it soaks into the top layer.

Cheers mate🙏 Not sure what you mean as in a headache in years to come? That the paint will not adhere to the bare gyprock?

If there is a lot of dust left on the walls after sanding it will get blown all over the wet primer and dry into sandpaper. Especially around the corners. How do you avoid that problem? Do you microfiber off the dust before you prime the drywall?

@@sucktdeep I will always dust down my walls with and vacuum it up before I prime it. I have a youtube video on it in my channel

Hi sasa, all depending on the amount of spraying you will be doing. But both awesome machines that will do the job. They both have the same size pump just motor size it different. Hope this helps mate. Cheers

Hi Matt, peace to the UK. Yeah the graco cordless can be more hassle than what it's worth. That's why I chose the 190 light, durable and a little work horse. It will spray full interior/ exterior day in day out. with the same endurance pump as the 595 definitely worth that extra coin. Hope this helps mate👍

@@paintingbyjosh thank you very much 👍

Hi josh just a quick question I know you said this is a work horse with same pump as 595,so this will be good enough and be a nice sprayer for me to use on new build site, house after house,sorry to re ask,just I'm looking at ordering one real soon as I'm about to start using.my bosses old 390 I think, its caped in paint.so hard to tel,and old as anything.thanks again and happy new year

Hi Damien, I would go with the Graco 190pc awesome little machine. Look after it and its probably the only machine you will ever need! Building & construction is going nuts over here also. Good for us👍 hope this helps mate. Cheers

@@paintingbyjosh Already ordered. Thanks for your insight and videos mate. Keep em coming.

Hi mate, I would definitely go with the 190pc over the prox17. I have used the 190 a few times a week at least for over 15 months and still sprays like new. Runs the same endurance pump 190 all the way up to the 595 awesome little machine. Hope this helps mate👍

@@paintingbyjosh that's all I needed to hear. Thanks mate and love the videos, very helpful

@@mattkollar3794 cheers mate appreciate it🙏

I run my pressure all different depending on the product the machine I am using the temperature it can vary from day to day even if I'm running everything the same. The best way to know what pressure is best as soon as you stop getting the tracks on each side and you are getting that nice spray pattern it's so hard just to give a pressure so many things come into play. What product are you using for trim? Cheers 🙌

@jay.c6080 hey man , he pretty much got you covered . Its so many factors on why something happens when spraying . It’s almost impossible to answer without knowing your set up , experience level , product your using . Without that info I’d say it’s a user error from just moving to slow and or to close to what your spraying . As well as to small of a airless tip . Yes you read that correctly TO SMALL OF A TIP . For example as im sure you know the first number has a meaning as well as the second number and everyone on RU-vid explains them numbers but don’t ever go into what exactly that means . It’s like regurgitated information one guy after another with many not understanding . So if your spraying I will not explain the numbers and their meaning as I’m sure you know . If your getting runs bump up your first number or lower your second number or both . Example . Your getting runs with a 212 tip . Bump it up to a 312 or a 310 . A 212 will apply more paint then a 312. The orfice hole on the tip for a 212 and 312 will throw the same amount of paint . But the 212 will apply it thicker because the fan size is deceased but the amount of paint is not so by bumping up a size and not changing the orfice size of the tip you will get a thinner coat and less likely to run, because the fan gets wider but the amount coming out is the same is what makes the coating get applied thinner . I hope that makes sense . Josh Is a very skilled painter and on point with his skills for sure . I personally feel he’s using to large of a tip but if he’s getting the results he likes then no reason to change . You have to find a set up that works for you and the speed you like to and feel comfortable spraying at. A man who don’t move as fast should use a smaller tip then a man who can run through a job . Paint is getting expensive and more expensive every year so I nderstandimg these airless tips is very important . I seen a guy use eight 5 Gallon buckets of paint on a job that should have taken 5 . That’s close to $400-$700 dollars of blown money depending on the material being used . That’s a car payment . And another tip if I can I’d give you is to not skimp out and buy the cheapest material . That can get you in poblems as well and cause uneven or blotchy finish that is not due to user error . Use good paint and get to understanding your tips . And make damn sure your cleaning them out properly . Even the smallest amount of dried paint inside can ruin your fan pattern . It may look good while you are spraying but when it dries could be a mess .!if you had one section of the fan that was throwing out less paint then the rest. And over the distance of a ceiling in the right lighting show up as stripe marks . That most won’t even know the cause of or understand why it happened as well as a blown out tip thats leaving a bulls eye right in the middle. Meaning its applying way more paint in the center and won’t be noticed until dried . Could cost some money to fix that issue as adding and spraying more and more layers will just not fix it especially using the same tip and not understanding it’s the tip .

I never back roll first coat on last coat. You are making more work & sanding than what is needed. I don't understand the point on back rolling the first - never have in 25 years and never had a drama. Cheers

Respect

Legend

Didn't have it on mate👍

Hi mate, I know the reason behind it but it's completely unnecessary that's for sure. Cheers for the message

Hi Daniel, Yes that's correct that's why I always back roll last coats 👍

I know exactly how it works. I was just trying to explain in a easy way that the more coats you put on with a roller the more paint build up the wall will have. So if I spray two coats and roll once it is going to be a lot smoother finish than rolling three coats. What's all I was meaning. Yes I could of explained it better! Cheers

Respect 💯 🙏

No that was just a example of the coats you are applying by roller are making the wall rougher with each coat and as painters we want the smoothest finish. So less roll more spray is what I am trying to say. cheers 🙏

I definitely could of explained it better in the video though 🤙

@@paintingbyjosh all good man, love watching your videos

@@AGRSSV1 thank you 🙏🙏

Thanks for your kind comment Leanne. Kind regards josh

@@paintingbyjosh josh I love having my house painted . I have renovated 6 house lived in my current one 22 yrs and have personally pained my home 7 times I paid a guy once and never again. I recently paid a friend and between me and her we got a two bedroom villa done in 2 weeks . Are in mind I oestioperosis and broke 4 knuckles sanding and painting the doors . It looks amazing and most likely the last time it gets done. I could watch you guys and others like you all day. Thanks so much

@@leannemayor5755 hi Leanne, it's can be difficult finding the right painter for the job. I have seen home owners produce better quality painting than many fully qualified painter's. Like all trade we get the good and the bad and then some that don't even give a shit about the finish or the work they produce and it frustrates the he'll out of me. I am truly passionate about our trade and my clients that choose PBJ to do there painting. I Try to be positive and show the right way of doing things to better our trade and myself in general. I appreciate the message. Cheers josh 🙏

@@paintingbyjosh yes we found as we were getting ready to paint tape above the doors that hey had painted over little things like they removed the power point covers but painted over the PowerPoint it’s self . Anyway if I was younger I’d buy the system you have . I’m about to start stripping some furniture and with the help of my carers it will be easy enough . Anyway good job and word of mouth goes a long way. Stay safe love from Sydney Australia

As you can see I was talking through the whe video! Cheers for watching

No mames Buey . Tu ponte a trabajar

Appreciate it bro🤙