Starlock Multi-Tool Adapters. Run Cheap Blades on your Starlock Oscillating Multi-Tool.

Подписаться 69 тыс.

Просмотров 48 тыс.

50% 1

This week I looked at adapters to run O.I.S. multi-tool blades on starlock multi-tools, and here is another option • The BEST Makita Multi-...
OSLO Tool Company Multi-tool Adapters
Makita www.oslotoolcompany.com/produ...
Bosch Festool Fein Flex www.oslotoolcompany.com/produ...
Screw in Design www.oslotoolcompany.com/produ...
OSLO Tool Co Norwegian Website www.oslotoolcompany.no/
/ toolsandstuff
Starlock to O.I.S. adapter (NOT for MAKITA)
US amzn.to/3HG8mrV
UK amzn.to/3HGRUaK
Bosch CURVED Sanding attachment
US amzn.to/4245U7a
UK amzn.to/418PLfk
/ toolsandstuff
/ toolsandstuff
My Other Channels
/ buildsstuff
LEGO / @voicelesstoolreviews
GRAB ONE
18v Heat Gun ebay.us/vsRUCs
40v Metal Cutting Circular Saw ebay.us/NxKKAW
40v Polisher ebay.us/S6JHTH
40v Trim Router Clear Base ebay.us/icqSKI Plunge Base ebay.us/sk9HEB
40v ebay.us/tq4djd 260mm (10-1/4") Circ saw with a 97mm depth of cut, adjustable & removable front, AWS and track compatible!
40v Recip FASTEST IN THE WORLD ebay.us/jv9KUy
40v Planer ebay.us/XDkiiK
40v Plunge Saw ebay.us/rpuYi5
40v AS001G Dust Blower shop.handyhardware.co.nz/maki...
40v CF002G Fan shop.handyhardware.co.nz/maki...
18v FR451D Screw Gun ebay.us/4NjFZH
SANDER ebay.us/31FcGM
KETTLE ebay.us/HsAqPJ
125mm FLUSH CUT SAW ebay.us/mIts9Z
PURPLE MAKITA IMPACT DRIVERS (& OTHER COLOURS) MADE IN JAPAN
NEW 18v Makita TD172D in all available colours ebay.us/HADzgU
18v Makita TD171D in all available colours ebay.us/b7erGy
40v Makita TD001G in all available colours ebay.us/kzI7Uq
►►►I get most of my tools from shop.tradierepublic.co.nz/
►►Get some 40v tools in the UK & Europe amzn.to/3306Htf
►Makita 40v finally available in the US! amzn.to/3tszyAP
More Makita XGT 40v Videos
40V DUST BLOWER • Makita 40v Dust Blower...
40v 125mm CIRCULAR SAW • Makita 40v 125mm Circu...
40V 165mm CIRCULAR SAW • Makita 40v 165mm Circu...
40V 185mm CIRCULAR SAW • Makita 40v Circular Sa...
40V 185mm TRACK COMPATIBLE CIRCULAR SAW • Makita 40v Track Saw O...
40V 235mm TRACK COMPATIBLE CIRCULAR SAW • 40v Makita 235mm Circu...
40V 270mm TRACK COMPATIBLE CIRCULAR SAW • Makita 40v 270mm Track...
40V 185mm REAR HANDLE CIRCULAR SAW • Makita 40v Rear Handle...
40V 260mm REAR HANDLE CIRCULAR SAW • Makita 40v 260mm Circu...
40v PLUNGE SAW • Makita 40v Plunge Saw ...
40V CHAINSAW #1 • Makita 40v Chainsaw Re...
40v MITRE SAW • Makita 40v 216mm Mitre...
40V BRAD NAILER • Makita 40v Brad Nailer...
40V INFLATOR • Makita 40v Inflator VS...
40v STICK VAC • Makita 40v Stick Vac V...
40v 125mm CIRCULAR SAW • Makita 40v 125mm Circu...
40V 165mm CIRCULAR SAW • Makita 40v 165mm Circu...
40V 185mm CIRCULAR SAW • Makita 40v Circular Sa...
40V 185mm REAR HANDLE CIRCULAR SAW • Makita 40v Rear Handle...
40V 260mm REAR HANDLE CIRCULAR SAW • Makita 40v 260mm Circu...
40V GRINDER REVIEW • Makita 40v grinder Vs ...
40V 6" 150mm ANGLE GRINDER • Makita 40v 6" Grinder ...
40V 7" 180mm ANGLE GRINDER • Makita 40v 7 Inch Angl...
40V 9" 230mm ANGLE GRINDER • 40v Makita 9" Grinder ...
40V FAN • Makita 40v Fan Review ...
40V BLOWER • Makita 40v Blower Revi...
40V WORKLIGHT #1 • Makita 40v Worklight R...
40V ALL DRILLS COMPARED • Makita 40v Drill Revie...
40V IMPACT WRENCH #1 • Makita 40v Impact Wren...
40V IMPACT DRIVER #1 • Makita 40v Impact Driv...
40V ROTARY HAMMER DRILL • Makita 40v Rotary Hamm...
40V RECIPROCATING SAW (SAWZALL) • Makita 40v Reciprocati...
40V COMBI DRILL (HAMMER DRILL) • Makita 40v Hammer Dril...
40V CHARGER & BATTERIES • Makita 40v Batteries a...
40V DUAL RAPID CHARGER • Makita 40v Dual Rapid ...
40V DRILL CLUTCH SETTINGS • Makita 40v Hammer Dril...
40V RADIO #1 • Makita XGT 40v Radio |...
40V BATTERY CHECKER #1 • Makita Battery Checker...
EVERY 40V CIRCULAR SAW • Every Size of Makita 4...
MORE VIDS
My Top 5 18v Makita • My TOP 5 Makita 18v Co...
My Top 5 36v (18v x2) Makita • My TOP 5 Makita 36v Co...
Homemade Hot Tub • How to Build a Hot Tub...
MY AMAZON STORE www.amazon.com/shop/toolsstuff
ToolsContactNZ@Gmail.com
If this description contains links to Amazon, as an Amazon Associate I may earn from qualifying purchases. This doesn't cost you a thing! But it means I can make more videos for you.
Check out my other videos for reviews of Makita, Hilti, DeWalt, Bosch, Hitachi, Ryobi and more... As well as build projects and the odd random thing.
#OSLOToolCo
#bosch
#makita
#multitool
#ToolsandStuff
#BuildsandStuff
#KiwiToolReviews

Хобби

Опубликовано:

4 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@ToolsAndStuffOFFICIAL 4 месяца назад

Try this adapter ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xWT19BWfh9I.html

@StrongmanLovesAnimals Год назад

I've been using the Bosch for a year and a half with a Makita battery adapter... Can't tell you how much I love it

@TheKhol Год назад

Been running the Bosch for over a year now and its a beast, love the small size and don't have an issue with holding it.

@whya2ndaccount Год назад

Hope you and the family are better - the gift that keeps on giving.

@khuongathebounga4141 Год назад

Ok I’m sold. That was the only thing holding me back from purchasing the Bosch Starlock. I’m quite surprised at how well these adaptors work. Especially the Bosch adapter. Simple yet effective. It’ll be good to see that sanding adapter from Oslo Tools in use too. Also good to see your videos after your Covid bout.

@leighsummerhayes242 7 месяцев назад

Thanks man this was exactly what I was looking for, a straight up review showcasing the Oslo adaptor actually working on the Makita multitool. Just bought 2 thanks to your vis cheers 👍

@MESTER47 Год назад

That’s so cool, I’ll order for my Bosch! Thank you for sharing with us. Cheers.

@donlamb1800 Год назад

Not only am I pretty impressed on the adapters, I'm pretty sold on the Bosch multitool as well.

@stephenleepmg113 Год назад

Blasphemy, sir, Starlock all the way. That is a very creative idea. Thank you for the video !!!

@sw86241996 Год назад

Honestly Bosch multi tool is still my favourite, narrow nose, reasonable vibration and smoothly cut. Stick with her more than 4 years not any drama. I quite like star lock system with quick change different blade for different job. Understand bit costly for star lock blades. But I usually add margin to my job quote still can manage 😊

@izoyt Год назад

makita/bosch should include this kind of adapter with the tool, to be honest. are you listening, team blue?

@macvos 9 месяцев назад

Bosch sells Starlock blades and also has to warranty the tool if the adapter fails. They'll also receive the complaints if the adapter isn't compatible with other accessories, like for dust extraction. They'll gain nothing and lose a lot with providing an OIS adapter.

@tonycook2347 Год назад

or just buy a Dewalt, battery lasts forever and it is a great tool. pointless buying a quick release to go back to using an Alan key. keep up the good reviews. ordered in a Makita dust blower based on your review, it's bloody gold.

@rob500100 Год назад

Brilliant idea

@robramsey5120 Год назад

The makita one would be better if instead of the pin being attached to the adapter and having to screw the blades on, the adapter just had a hole through it and came with a longer quick release pin.

@frenchyroastify Год назад

Yeah, I don't understand why they didn't go that route.

@digitalparadigms Год назад

There's a Russian one made that way. You will have a hard time finding him and he only accepts orders via email and Bitcoin. Lol

@rhystudordavies Год назад

I was thinking the same. I don't need it but using the allen key all the time would be a dealbreaker for me

@misha030302 Год назад

@@digitalparadigms You mind telling his channel name?

@slinkytrips Год назад

@@frenchyroastify because then it becomes a Starlock product and they have to pay a license fee to Bosch. If they can manufacture OIS blades they could make Starlock, but they would have to pay to use the design, these adapters are purely there so they can sell OIS blades to Starlock users without paying any fees.

@colinhall8998 Месяц назад

Great video, very informative and educational. Thank you very much, I’m more educated now 👍

@nocnymarek7645 11 месяцев назад

Starlock blades are more costy than OIS but must say they are also much more effective. Bosch Expert lineas well as 115 mm sanding disc from Fein are game changers.

@lecolintube 6 месяцев назад

I love those intro’s 🤩🙌

@1Brushon 11 месяцев назад

Had my Bosch for a year using it often, cutting plywood, OSB, etc the smaller arc, gives better control, the handle size is fine, personally hate when my fingers wrap all the way around.The slim design is great for tight spaces under cabinets.

@riba2233 Год назад

Really nice adapters! I would just like to see a screw and a washer in one piece so it less fiddly to install 😊

@PeterTrimboli Год назад

Yeah I was kind of wondering why they wouldn't make the washer captive

@Mattittas Год назад

Adapters like these sure are nice to have, even though starlock is superior, especially the Bosch variant without the throughshaft

@exigauner Год назад

On the festool ofc fits All 3 starlock, starlock plus and starlock max with the bsch like Pins.

@EliotTruelove Год назад

The bosch click system is similar to the x lock. If I get the Makita tool, I am going to see if a spider bit holster or something similar could hold the spare pins and Allen key for onboard pin storage.

@HotForgeChaos Год назад

If you want a multi tool that has the low vibration features with the OIS fitment, buy the Gen3 Milwaukee.

@FixthisCD Год назад

Never knew they had those lil adapters

@eirdamai 11 месяцев назад

Thanks! Hope you got well without any lingering after effects from the bug. @13:37: Shouldn't the blade have been put on 'in reverse allowing a 'flat' approach when working close to a flat surface? For example, when cutting a nail flush to the surface it is sticking out.

@FixthisCD Год назад

I guess you could buy 3 adapters for your most used blades, then you could change blades faster than the bolt method

@toolscientist Год назад

^^^ this guy is defo on the Oslo Tool company payroll 😂

@kennethhanes5438 Год назад

Great idea in theory but transporting it takes up a stupid amount of room and makes the blades and shaft vulnerable to getting bent

@kc0lif Год назад

i like starlock.

@nocnymarek7645 11 месяцев назад

It could be great to see Makita, Bosch and Fein as a three starlock machines in comparison.

@ningis21 Год назад

Wonder why they didn't just make the holding pin longer...making blade change toolless? For the Makita version. GET WELL SOON.

@jamallaidley4718 Год назад

I like the starlock blades but you can't find them alot here

@Pete.Ty1 Год назад

👍👍👍Thanks.

@iangregoryhome Год назад

The Bosch one reminds me of the space ships in Space 1999 🤔

@753zXc Год назад

Your voice still sounds sore, but welcome back!

@SusiesRepeat Месяц назад

Have my original Bosch multi tool (non starlock). Have lot of Markita 18 volt tools but held their multi tool which I find too bulky for my hands.

@alanmarriott9216 5 месяцев назад

I’ve had one of these adapters from Oslo tool company and had such bad experience with it! The vibrations kept making screw come loose constantly and everything kept falling to pieces so became very frustrating. Such a shame as great idea!

@98karlh 5 месяцев назад

Aaand not sold anymore.. cool

@nocnymarek7645 11 месяцев назад

Does exist adapter to run Makita using Bosch akus?

@lamdog24 3 месяца назад

Anyone know of somewhere to get an adaptor in 2024? Can’t find them anywhere anymore.

@AndrewStrydomBRP Год назад

Nice to know, but I'll stick with my dewalt and a battery adaptor. I get cheap blades, quick change and a variable speed switch and trigger. Yet to see anyone rival that.

@dialcast Год назад

The Rockwell F80 has 2 oscillating modes: 5 and 3.4 degrees. But as it is a corded 120V tool, it is not worth getting it outside North America.

@micmac69 15 дней назад

Where can i buy one in the UK?

@Ana-qd7zh Год назад

How did you get the Bosch profile sander to actually work? I bought one a couple of years ago but it was useless because the sandpaper just pops off as soon as it turns on.

@ToolsAndStuffOFFICIAL Год назад

I haven't had any problems with it. Try different paper with more 'fluff'

@stepansavelyonok5532 Год назад

Fun fact. I use m12 multitool, switched from dtm51, but almost all my blades are starlock, they just run much longer and less burnouts happening with them,

@HotForgeChaos Год назад

Is that the new M12 multi? I have the M18 and I love it but I hate the monstrous dingus battery end on it

@stepansavelyonok5532 Год назад

@@HotForgeChaos yes, the fuel one. Absolutely awesome. And with 4/6ah it is pretty in line with the blade. Only speed dial always trying to slow down.

@sittisontiainen 2 месяца назад

Where can I buy this adapter?

@hungtranngoc5830 Год назад

anh làm video thì nên thêm cân nặng của máy nữa và khi có cả pin

@wearsjorge55 Год назад

Just waiting for a reverse adapter to put max blades on old multitools

@macvos 9 месяцев назад

Bosch and Fein say they need the stronger connection. The increased length and weight of the blade increases vibrations and force on the connection (and therefore the tool itself).

@Andersp90 Год назад

Do they also make adapters for starlock angle grinders?

@djbassbjrn1432 Год назад

You mean x-lock?

@Andersp90 Год назад

@@djbassbjrn1432 i guess. :)

@ASMR-soothingsounds 3 месяца назад

Too bad these adapters from Oslo Tool are no longer being manufactured and available.

@ToolsAndStuffOFFICIAL 3 месяца назад

It seems everyone making something similar has also stopped. I think they may have been pressured into stopping... I'm still looking for a current manufacturer.

@nolanroberts9870 4 месяца назад

Anyone know where I can get an adapter that serves this same function for the dtm52/xmt04? The only adapters I can find now are for the xmt03 since the Oslo Tools one isn’t available on their website anymore. Please help! I can’t afford the damned starlock blades

@nolanroberts9870 4 месяца назад

Oh also, @Jonsrandomreviews, I’d love to buy one of yours!

@ahmedsoliman2204 5 месяцев назад

Hello, this company stopped selling multi tool adapters… any alternatives please??

@ToolsAndStuffOFFICIAL 5 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xWT19BWfh9I.html

@user-yu3wu4ul7m 4 месяца назад

These adapters from Oslo Tool look great but they no longer produce or sell them - which is a huge bummer - the others I've tried work poorly and are poorly made

@DarianDT 7 месяцев назад

I have a 15-year-old corded Porter Cable Oscillating and switching the blade takes 3 seconds. Hold the lever to release the old blade and put in the new blade and release the lever and it holds in firmly. It's the same design that Dewalt is using now. I don't know why all these top "companies" design such a ridiculous way to change blade. I bought this new Makita and regretted, sold it a while back.

@gheorghefrasineanu7404 Год назад

How to buy this adapter

@ToolsAndStuffOFFICIAL Год назад

Look in the description.

@slappymcphee 11 месяцев назад

timestamps would be nice and of value, but great video nonetheless. 😃

@temporaryname8639 Год назад

hello

@Basnak Год назад

I have an idea how to make adapter better..

@joaquinchan9936 2 месяца назад

This is my opinion, but the Makita is my least favorite multi tool I have used so far. I think the new Bosch fixes most of the problem it had with the first one.

@TheDookistan Год назад

I have the previous model Makita and it wanders as well, it's fixed by slowing down. Most issues are fixed this way.

@Ffoo_ffighter 4 месяца назад

Oslo no longer sells adapters.

@peterstevens6555 Год назад

Evening from Aucks ... 😂😂😂

@rbproductions78 Год назад

What?! No VPN??? What about Squarespace? hahahaha

@nocnymarek7645 11 месяцев назад

Makita Tool is too big and heavy to be comfortable and handy while idea of these tools is to be relatively small, smart and versatile.

@N00bz0rthefirst Месяц назад

The website or adapter no longer seems available, which really sucks, can't find anything like it.

@ToolsAndStuffOFFICIAL Год назад

Multitool Showdown ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UEws-gbUUhk.html

@redkingwell4047 Год назад

Why couldnt they make the makita adapter pin also lock a star lock blade in, aswell as be the adapter for a standard blade ? Then you wouldn’t even need the original pin just use the adapter for both…

@ToolsAndStuffOFFICIAL Год назад

The adapter would then be loose when not using a starlock blade.

@redkingwell4047 Год назад

@@ToolsAndStuffOFFICIAL good point although if you had a star lock shaped washer blade thickness this would work like a dream ?

@Basnak Год назад

Why whole world has the same name for mak tools but only america is different?😂

@toolscientist Год назад

Are you the last person in the world to get covid?

@ToolsAndStuffOFFICIAL Год назад

Possibly. Dodged it for over 3 years.

@toolscientist Год назад

@ToolsAndStuffOFFICIAL we need to make you a trophy.