No video :(

Step By Step Two Way Remote Audio Set Up for CCTV IP Cameras

Подписаться 10 тыс.

Просмотров 34 тыс.

50% 1

Purchase BV-Tech 6 Port PoE+ Switch: amzn.to/35g2SUH
Purchase Speco SPC10 6" 15-Watt PA Horn: amzn.to/3KLouZq
Purchase Pyle 2x15 Watt Power Amplifier: amzn.to/3HcNCX2
Purchase RCA Adapter Audio Connector Speaker Wire to RCA Adapter: amzn.to/3Hl9lw1
*As an Amazon Affiliate I earn a small commission on qualifying purchases at no cost to you*
------------------------------------------------------------------------------------------------------
►Subscribe:
/ @wentworthcctv
------------------------------------------------------------------------------------------------------
Dahua N45EYN2 4MP Outdoor PoE Night Color Network Dome Camera:
www.bhphotovideo.com/c/produc...
------------------------------------------------------------------------------------------------------
► Step by Step Two Way Remote Audio Set Up for CCTV IP Cameras
In this video we demonstrate how to install a Dahua N45EYN2 dome camera. The installation includes the two-way remote audio function that can be used with Dahua DMSS phone app or Dahua Smart PSS client software for PC.
------------------------------------------------------------------------------------------------------
AFFILIATES
► Free Audible Trial: amzn.to/32nQu41
► Free Amazon Prime Trial: amzn.to/3qI5zpp
► IP Vanish VPN 65% off: www.tkqlhce.com/click-1005476...
------------------------------------------------------------------------------------------------------
► Chapters:
Intro: 00:00
Connecting Dahua IP Camera to the PoE switch: 04:25
Connecting Trumpet PA Security Horn to IP camera using RCA plug: 05:10
Logging into Dahua IP camera to enable audio: 06:50
Using DMSS phone app to listen to camera Microphone: 08:40
Using DMSS phone app to speak through PA: 09:30
---------------------------------------------------
► Follow us
newenglandcctv.com/
/ wentworthcctv
/ fred-wentworth-03439399
/ wentworthcctv
newenglandcctv.com/blog
#hikvision
#dahua
#speco
#wentworthcctv
Step By Step Two Way Remote Audio Set Up for CCTV IP Cameras

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@PastorjackWilson Год назад

Loved the instructional

@socalducky Год назад

If your looking to have this setup in more than 1 location or on multiple cameras on the property you may want to look at self amplified horns. Only challenge is having a power source near by, the advantage to using a self amplified horn is you can really BLAST the sound in noisy environments and you know have ZONES. Front yard, Back Yard, Side Gate ETC... Cool Video Fred !!

@WentworthCCTV Год назад

Yes, we have a separate video on doing this with a Pyle Amp for such scenarios

@jeanius123 2 месяца назад

Thanks. 😀

@benedictellevera4696 9 месяцев назад

May ask what is the watts of the speaker horn being use...?

@claudemirbenelli1433 Год назад

Hi, i like your videos they are detailed, maybe you can help me. what Hikvision camera that i can do this the same set up? thanks, and keep up with great work

@allaboutcctv3161 Год назад

I have 8 channel dahua nvr and 8 camera all have audio in/out port can we do two walk through all camera is it possible than why please tell

@kennethcain1303 Год назад

How do you hook up the amplifier to the speaker??

@Megadad70 7 месяцев назад

thank you so very much

@WentworthCCTV 7 месяцев назад

you are very welcome!

@concerned_2023 Год назад

Hey there. I tried this speaker with a TiOC camera hoping that the prerecorded messages would go out over the speaker. Tech support tells me I need a amp for the speaker. Have you tried it with a TiOC?

@WentworthCCTV Год назад

Yes, you will need an AMP if you have a long run to the speaker to get the volume up. I have a good cost-effective Pyle amp listed in the description to the video. I use that set up a lot.

@PastorjackWilson Год назад

I wanted to ask a question-I have 4 cameras hooked up on my house. They are very cheap but work well. I wanted to hook up the setup you describe above so 2 questions. 1 is the poe switch. My other cameras are wireless so do I need one and why. 2 Is there a cheaper cam you might recommend? Thanks for your time.

@WentworthCCTV Год назад

The cameras would need audio out to hook to the speaker horn and amp. Most wireless cameras don’t have that. What make and model are your cameras?

@arjunchand09 Год назад

So I just purchased this dahua camera i did everything in the video but im not having any audio in or out ? Is there something additional i need to do?

@WentworthCCTV Год назад

No. You should not have to do anything extra. The camera has a built-in microphone so let's start with that. Are you using a browser or Smart PSS to view the camera.

@arjunchand09 Год назад

I currently have the lorex 8 channel setup it doesn’t have audio out so im setting up a separate setup for only audio out ive bought everything on the list do i need and additional nvr or dvr to connect this standalone dome camera?

@WentworthCCTV Год назад

Not if it is an IP camera with a built in microphone. Once you log into the camera and enable audio, you can hear it through your PC in a browser or using the manufacturers client software/ phone app.

@arjunchand09 Год назад

How do i enable audio on the camera

@WentworthCCTV Год назад

you log into the camera and ensure audio is enabled under video parameters.

@Yatana108 2 года назад

What kind of cable should buy if I want to run about 100ft of cable from the Camera audio out to the Amp and back to the Speaker?

@WentworthCCTV 2 года назад

I use 18-2 speaker wire. You will need audio plug for speaker out of camera to amp.

@WentworthCCTV 2 года назад

www.amazon.com/10-Pack-Speaker-Cable-Connector-Adapter/dp/B07WGMZMZ6/ref=mp_s_a_1_4?crid=1N2VQW6JG6MWT&keywords=plug+for+speaker+wire&qid=1648351832&sprefix=audio+plug+for+spea%2Caps%2C70&sr=8-4

@Yatana108 2 года назад

Thanks

@ducky6596 Год назад

How to record external audio with an non-audio IP camera ? Sorry for my bad structured question.

@socalducky Год назад

You have to check if your camera has Audio input on the camera all you would need is a microphone and connect it. Login to the NVR Main Menu. Under the Image or Camera section, select Encode or Audio/Video.

@seohrf Год назад

I setup same step with dahua ip camera, but it doesn’t work, why ? Anyone can tell, also any micro for ip camera ( too noisy the build in mic on the camera, I want to get a better one with noise cancellation functionality), thanks you

@WentworthCCTV Год назад

What is not working? Depending on the distance from the camera to the speaker, you may need a amp as mentioned in the video. I use these. amzn.to/3XXdNJl

@kman8600 2 года назад

Does it work for Hikvision/LTS systems ?

@WentworthCCTV 2 года назад

As long as the camera model has the audio out plug.

@socalducky Год назад

@@WentworthCCTV And as long as the camera has AUDIO input as well.

@RocresAying 6 месяцев назад

does a 50 watts 80 ohms work?

@WentworthCCTV 6 месяцев назад

It should, but you would need an amp for that.

@tanvirfoysal5646 5 месяцев назад

A few days ago, these options were working. Now you can't do two things at the same time. If you go to talk option, the camera talk is turned off. Again, when I turn on the sound option of the camera, the talker option is turned off. If you want to do one, you have to keep the other off. Can't speak and hear at the same time. But a few days ago these two tasks could be done simultaneously with the phone.

@WentworthCCTV 5 месяцев назад

What make and model number is the camera you are using?

@MY-BANGLADESH 11 месяцев назад

Hello dear bor... Im interested .. How to order cctv camera with big soundbox

@WentworthCCTV 10 месяцев назад

The information to order is in the description to the video. The same equipment used in the video

@--Tamjid-- 2 месяца назад

how to setup ip camers with built in mic?

@WentworthCCTV 2 месяца назад

If they have a built-in mic, you don't have to do anything. Just enable audio in NVR. What brand and model camera are you using?

@rodb2672 Год назад

What about the audio in plug?

@WentworthCCTV Год назад

You don't need to use that if you have a camera with a built-in mic as this one has. If you do not have a built-in mic, that is where you would plug one in.

@rodb2672 Год назад

@@WentworthCCTV that would be a good video for a lot of people. Thanks

@Yatana108 2 года назад

Sir, I have an important question! Does the Audio out from the IP Cam, also provide power to the speaker? Won't you need an Amplifier to add in between?

@WentworthCCTV 2 года назад

The horn or speaker will need an amplifier if you need the audio to be loud. It works without one, but in a noisy environment you would want the amp. Several people have mentioned this so I will do another video soon including a Pyle amp.

@Yatana108 2 года назад

@@WentworthCCTV Thanks for your reply, but if I connect it without an amp, it won't damage the camera by pulling too much power? Only the sound would be low?

@WentworthCCTV 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jVAdMPd6EUE.html

@WentworthCCTV 2 года назад

No it won’t hurt camera

@8ajay 2 года назад

SPEAKER POWER ?

@WentworthCCTV 2 года назад

If you want it louder there is a amp link in the description

@WentworthCCTV 2 года назад

Its a 15-Watt Speco horn. This amp is what we generally use: amzn.to/3LkptQB After your comment, I thought about it, and I should have included the amp in the video. I am definitely going to do another video with the amp as the audio isn't very loud without it.

@Yatana108 2 года назад

@@WentworthCCTV but would you install the amp near the speaker itself? Obviously it doesn't make sense to run a cable from the cam to network closet to the amp and again back to the camera. Am I right? I thought one can mount it i a junction box under the speaker

@WentworthCCTV 2 года назад

@@Yatana108 yes at camera to audio out plug. I use Pyle amp works good.

@WentworthCCTV 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jVAdMPd6EUE.html