Stick Welding Techniques 7018 5/32"

Подписаться 1,1 млн

Просмотров 622 тыс.

50% 1

see the full web page here bit.ly/2RuKFrw
Subscribe to my channel for more weekly videos.
www.youtube.co...
Visit my store at weldmongerstor... for TIG Fingers, DVDs, and other quality welding tools.
We have had a few requests for videos using 5/32" 7018.
This video is about a vertical uphill fillet weld using 7018 5/32" diameter electrodes.
Amperage range for this rod is 130-210 and we welded the whole joint out using 140 amps.
The main things to pay attention to on any weld using 7018 are ...
amperage, polarity, arc length, angle of rod, manipulation or technique, and travel speed.
For even more options, check out my Amazon recommended products page at www.amazon.com...
Follow Welding Tips & Tricks on social media to see what I’m up to:
Instagram: / weldmonger
Facebook: / weldingtipsandtricks
Join the discussion with thousands of welders at the Welding Tips & Tricks forum
forum.weldingti...

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 250

@Lambear82 5 лет назад

If you're doing a plate test, taking the time to let the plate cool between passes can really be beneficial in preventing undercut and sag. Great video as always, just wanted to add my 2 cents.

@fe8199 3 года назад

Sign of a welder worth his money though is one that approaches the test like they would a weld on a job site, and on a job site where time is money...you can't cool your parts down and constantly be changing your amperage. Want to be a welder that's worth his money...learn to make amazing welds quickly and without constantly changing your amperage. This can be achieved by learning different techniques of rod manipulation for different situations

@TheRegretedURL 6 месяцев назад

@@fe8199dead on

@jdbrewer6638 5 лет назад

Great video!! All anybody noticed in the comments was Andrew's hood.... nobody noticed how perfect his weld looks while not using a prop for his welding arm! Free arming 5/32 uphill and knocking it outta the park!! You're my hero, Andrew!

@ajsironworks3937 5 лет назад

JD Brewer agreed that dude is a great welder

@Weldingprobably 4 года назад

I noticed, very good welder he is.....I gotta use both hands and a prop

@santiago5406 4 года назад

Honestly

@DXT61 4 года назад

Is this welding in real time? It seems as though i am traveling faster when i do it. This makes it look so easy.

@dazdavis7896 2 года назад

You’re going faster than that? He’s already going pretty quick for a weave pattern. Unless you’re burning pretty hot like he was up around 140 then you’re probably getting like no penetration.

@DXT61 2 года назад

@@dazdavis7896 I was using 1/8 but i believe i was just running too hot. Think ive bumped it down to 110-115 for uphill. I think my problem was too hot which was causing the metal to drop and bulge up in places and i was moving faster to compensate as opposed to dropping the amps. Think i was at 125 initially but that was 1/8 7018.

@dazdavis7896 2 года назад

@@DXT61 I was just about to ask if you were runnin a 5/32 7018 instead of a 1/8 that woulda made more sense them telling you run it that low…. My Gpa, who got me into welding before I went to school, welded on the railroad for 35 years. Heavy duty 6010, 6011, 6013, 7018 welding on the train cars and what not, he always told me it’s better to burn too hot than too cold.

@irondiver292 2 года назад

@@dazdavis7896 no penetration with 5/32 stick?

@dazdavis7896 2 года назад

@@irondiver292 uh, if you’re going to fast, yes. But apparently you don’t read the comments I thought he was using a 7018 til he clarified that.

@ThatV12MiataBruh 5 лет назад

Theres something about stick welding that's so much more satisfying than TIG or MIG

@jiml7933 5 лет назад

I dont count tig and mig as welding lol

@organicox80 5 лет назад

That's coz TIG IS FOR GIRLS MIG IS FOR GIRLS.

@organicox80 5 лет назад

@@jiml7933 yep, thats it, tig and mig is just like soldering for plumbers.

@eharris6347 5 лет назад

I thought the same went to votec ,a year and a half , just getting ready to start on tig, but went out , went a long time making it without tig, but come to find out I didn't realize how important and in demand it is in , so I had to pick it up , wish I'd stayed a little longer in votec and got on some tig, instead of almost 10 years later , most pipe is done now with a tig bead and stick the rest of the way out , and alloys are always mainly done with tig, I know guys that straight tig in the field and can barely weld with anything else making good $$$ , I've relized I best get with the program and get on that tig

@ThatV12MiataBruh 5 лет назад

@@eharris6347 dude I tig everywhere I possibly can and if I can't tig then I'll mig.

@leebarnhart9725 5 лет назад

I don't think I enjoy any other form of welding more than 7018 uphill. This video was spot on in every aspect. You're the best Jody!

@jamescole2093 Месяц назад

Haha, I gotta practice more it’s my least favorite position

@leonardomezzomo3645 5 лет назад

New video iquals instant like hehe. Hello from Brasil.

@danharris8046 5 лет назад

Thankyou for using the red line to show the technique you are using..... it’s very helpful

@robothatpastryguy7025 4 года назад

I'm a chef of 2 decades. I'm 39, & just got into shipfitting. I can't express my gratitude enough. My vertical 7018's were garbage. They are getting better. Thank you so much for these instructional videos.

@molitovv 5 лет назад

How to weld whilst dressed as a lollipop 🍭

@rigsospuro7158 4 года назад

Pancake bud. Obviously you don’t know the feeling

@MRSTEEL-fd7eg 5 лет назад

Thank you Jodi I requested a 5/32 7018 uphill about 5 or 6 months ago. I still think your welding videos are the best!

@AMBUMAN121 5 лет назад

I hate it when you lay your welding helmet on the ground and a steam roller just happens to come by.

@christopherortega800 3 года назад

This is honestly one of the hardest rods for me to run vertical great video

@ChrisB257 5 лет назад

Most useful. Thanks as always Jody. :) Love Andrew's mask!

@usa8835 5 лет назад

Thank for video clips 👍

@gilbertoromero3876 5 лет назад

Always informative!💪🏼👨🏻‍🏭

@johndeninger8905 4 месяца назад

Great video 👍👍

@brunoemidio2726 3 года назад

Não entendo nada do q estão falando mais a solda é sensacional aí falamos a mesma língua bom d+++

@alexandreteixeira3911 5 лет назад

Me encantó la técnica, estoy empezando y quedo muy feliz por el tips, me encantaría visitarlos 🤗😉👍💪

@moadzakini1184 3 года назад

@rminitials 4 месяца назад

Thank you for this. It really helps me in between my classes.

@liebesterngelb 5 лет назад

Dear Sr I am a subcriber from Honduras and here we don't really have access to that kind of welding machinery due the prices here are 30 times yours in the USA . I hope you can make a welding review with the Lincoln stick welder that is the most popular welding machine here in Honduras. Thanks alot. I do really learn with your videos. Muchas gracias. Desde Honduras .

@2ndshiftaudio300 5 лет назад

I was taught by a 65 year old man over 25 years ago how to weld. I've never been to school for welding. I use an old style Jackson welding hood. It's not arch flash. It's a typical old school welding hood. I weld Exxon gasoline tankers daily. And milk tankers a lot. The welder I use is a Miller from like 1980. My point is. Why do you need all these fancy welders with all these settings I don't even understand how to work. I'm thinking it's all unnecessary. Oh yeah, I use an old Ideal welder cracker box for welding 7018's. It has no setting at all really just an old dial for heat up and down. I pass welding tests every time they make me do them. With the machines I use everyday. It is what it is I guess.

@JonDingle 4 года назад

I am self taught and prefer the old school welders. Both of my Mig's were made in the 1990's, I have a 1984 oil Oxford 180amp cooled AC stick welder and a 2002 Oerlikon Presto 140 G inverter welder which I use a lot in my videos and on farm repairs. Old stuff is perfectly good, no need to spend thousands of $$$$ or ££££ on welders, it is the man or woman working the arc the makes the weld not the machine!

@elgayetas 2 года назад

What do you want a medal or something?

@basketcas3717 Год назад

Man I've been watching your videos since I was a first year apprentice when I started ironwork in 2017.as good as the training was in the apprenticeship I'm positive you are the reason I've become as competent as I have at welding. I don't want to say I'm the best welder, not by a Longshot but using your techniques have helped me become a solid welder whenever I weld.

@cleberrodolpho7661 5 лет назад

Me orgulho de fazer parte dos que conseguem desenvolver esta tecnica e execuçao desse lindo trabalho, Good Job , tank you...

@aboabdobarbar420 5 лет назад

First I want to thank you for what you do. well you Please make a video explaining everlast 521 si setting .Especially the mig pulse . I bought one and I see it's a bit complicated. Can you please help me and simplify the settings as much as possible .Especially as the instruction manual is not in my original language

@OffGridOverLander 5 лет назад

I realize this may be a specific video request...but can you do one for 8” 13# I-beam welded at 90 degrees to each other and at head hieght? Maybe some tips or tricks for coping one to meet the other would be nice too. I’m still trying to finish a frame to go under a shipping container and I need to weld it together in place since I don’t have any equipment strong enough to lift it where it needs to go.

@samyfajard2906 5 лет назад

hi jody hello adrian greetings from colombia, all welding classes have helped me a lot, help us clarify doubts or any concerns you have, thank you very much for your lessons.

@ChrisWojnarski 5 лет назад

Great video Jody and Andrew you the man 👊🏻

@jeffgrier8488 5 лет назад

Great informative video as always, thanks!

@hispanofr3658 Год назад

You have the pulse of a surgeon man, job well done

@LilD1988 2 года назад

Sometimes it be hard for me to keep my beads straight and iont know if it's my stance or because I'm using one hand. And I'm running my Amp at 90. Can someone help

@codycarswell3580 5 лет назад

I recently just bought an esab rebel 285ic, what are your impressions about it's weld quality and how it compares to the other machines you've got or usec

@kuhlivskij_roman 4 года назад

👍👍👍...мало знакомых слов, но за то видео шикарное!!!🤝🤝🤝

@gmarcins 5 лет назад

great video, very educational. Thanks!

@justinhill376 4 года назад

Who Can answer this question... Say you have 3/32 and 5/32 7018 rod and both are set to their own respective amps. WHY is 5/32 7018 so much harder to manipulate than 3/32 and what are some techniques

@ArtWelder 5 лет назад

Grate job Thank you for video

@harveystedham9490 5 лет назад

Hi Jody, Love your videos been watching for years, always great help and information! Was thinking of an idea for a video, 3F vertical up stick weld etch test comparison! Thinking 6013 root and cap, 7016/18 single pass, 7016/18 root and cap and then a typical 6010/11 root and 7016/18 cap! Would also love to know how a vertical down 6010/11 root with a 7016/18 vertical up would go! And have you ever found rod thickness/flux affects root penetration on a fillet weld or is it really only a concern on 3G with fitting in the groove? Just in my mind for example a 2.5mm 7016 is much smaller so sit tight in the V while a 5mm 7018 would be harder to keep tight in there! Thanks, Harvey

@lucasrobinson537 5 лет назад

What a great lesson in stick welding. I have much to learn if I am to master stick welding with my everlast stick welder

@ericl2969 5 лет назад

These videos are so helpful. To help my (mainly) hobby welding, I took a beginner's class at the local tech college 25 years ago and was taught a "whip" manipulation for this kind of weld, with 1/8" 7018 (I also have a textbook which recommends a similar method). I had a tough time getting that right and never did perfect the method, partly because I can usually set the position of the work to avoid difficult positions, which has the negative side-effect of eliminating practice time! It is SO good to see not only a completely different method for doing vertical-up fillet welds, but also a functional explanation of why that particular weave works well. This looks easier to "get right" than the method I've always used in the past, and I'm making a note to try this myself.

@metalslingr 5 лет назад

“I like it.” - JC. 00:31

@isaacwhite7411 5 лет назад

Pretty good welding your doing one thing wrong, the angle,the angle of the rod really suppose to be pointed downward about 10 degrees,if you look this up you will see that im right,I'm combination welder iv done uphill many times and welded rings in school and your heat is just a smidging hot you can see it in the tow of the weld.

@4m05 Год назад

I am gojng to try some of these techniques tonight I am learning level 2 stick welding and need to do a fillet uphill, my tutor said to do a Christmas tree weave pattern I will ask him if I can do the Z pattern and upside down V instead plenty of things to try just from this video alone

@CanalSHAWBE 4 года назад

Bom trabalho amigo 👍

@elmarvlog4624 2 года назад

You are really good at welding sir, i will lean

@ionutth4895 4 года назад

i cant weld stick at all i only get slag included and i cant see it while i weld for some reason no matter what technique i use i get porosity and slag inclusion in some places even on horizontal why i dont understand, if i weld flat on top of a piece of metal it works perfectly, if i weld 2 pieces of metal 90 degree i get massive porosity and inclusion, yet 2 pieces of metal head to head with no space between welds perfectly, i really need to fix my welding for a job and cant understand what im doing wrong

@kirillbondarenko7029 Год назад

Hello. I would like to see the socket welding of the pipe in the 5 F position. I did not find this on RU-vid. Can you?

@riggsandmurtaugh7938 5 лет назад

A lot of lead angle but looks fanominal

@НиколайКрутько-ф3я 4 года назад

Озвучку на Русском языке сделайте будет многим полезно.

@loganlyon9822 Год назад

Could he come back and do a 6-pass vertical up? All stringers

@humberoestrada388 5 лет назад

Excelent video, great job Greateens to both

@4599BakerBoy 3 года назад

6gr 7018 beveled pipe on bottom. Non beveled piece on top. Can you do it ?

@georgiojansen7758 5 лет назад

under cut, say that in dutch

@lendavidhart9710 4 года назад

Watching a second time, nice work gentlemen.

@王英圭-h9q 4 года назад

向後退焊法才可清楚看見鐵水堆積容量，焊成品平美寬度。

@СергейСушко-з4о 2 года назад

Маска прикольная он бы ведро одел посмотрел бы как на монтаже с такой маской варить.

@ahmedawaad7051 4 года назад

كيفيةلحام شروخ فى تنكان ضغط هواء

@алиханалихан-п9я 4 года назад

Молодцы как таджики работают и варять.окей верри гуд

@simclardy1 5 лет назад

Judy thanks for bringing Andrew on board! My stick welding is improving after almost giving up on it. Tig was my go to.

@craigbosko2229 4 года назад

I'VE ALWAYS FELT THAT STRINGERS BEADS ARE STRONGER THAN THE WEAVE IN SMAW,GTAW,FCAW(WITH OR WITHOUT GAS SHIELDING)GMAW.

@GibClark 5 лет назад

Thanks 👍👍👍👍

@abhayupadhyay2527 5 лет назад

Nice to video good bhai

@Makermook 5 лет назад

I tried welding 7018 overhead the other day and it was like the slag kept dripping down and snuffing out the arc. Any quick ideas what I was doing wrong?

@dominicwinning33 5 лет назад

Look at your rod angle, of it's not right it will snuff out the arc, also look at whether your arc is too close as it can happen then too. If required, turn up the Amps a little at a time, some people like it hot, some cold, play about and you will find your clean bead 👍

@darcypatterson8229 5 лет назад

Great video

@ricardocasanas7906 4 года назад

Hello.... Plis subtitle un write spanish. Thanks. Is very good chanell. Bye

@BrucesShop 5 лет назад

Thanks again

@bryanholliman834 4 года назад

I’m welding a thumb on an excavator and I’m not a professional welder. The instructions say single pass .060 fillet weld. My question is. Isn’t .060 very wide for one pass. What rod and diameter could achieve this?

@jeremiahgabriel5709 Год назад

If anyone here at this channel reads this: 1. Thank you for your excellent tips. 2. What camera/ lens/ equipment are you folks using to get such excellent visuals of your welds?

@tsi87supr60 4 года назад

Is there a video on a flat butt weld using 7018 5/32 no backup, 1/16 gap & landing. With root pass then the same half weave & half stringer cap?

@marcotte6608 6 месяцев назад

I have 45lb of Lincoln 5/32 7018 in my truck that I almost never run because of I'm scared of blowing holes and such.. This man is hitting a vert on 3/8 steel and he's just erased all my fears. Gonna show off in the near future lol, I like to be able to get a lot more weld in 1 rod too..

@rostilj92 5 лет назад

but how with 140 amps? When I tried it with that much amps and the same size of plates, electrode, it starts to eat steal, to burn it :o .And of course I'm doing motions and stuff with electrode. I don't know how it goes normally when you put 140 amps

@robertblackshear8963 Год назад

Lol. You run 5/32 7018 the same way I did on ships. That technique is the best to let the puddle cool down enough to not drip down lol. Great video man. You are a great teacher.

@SageOfBlades 5 лет назад

The new Sephora add is so fucked up..

@eliapple1224 5 лет назад

Hey can you do a video about Ark force or the Dig function recently I was on a new construction apartment building where we were welding 3 inch plates two-way heavy duty I beam one on top and one on the bottom some gussets for structural support the stick welding Lincoln machine had a 225 and then drop down to a 180 and I kept on getting blowback can you give some advice on how to avoid that

@themechanic4222 3 года назад

I’m still confused 🤷‍♂️. Do I push the paddle with the rod ? Or stay away from it like 👍 1/16

@ALSomthin 3 года назад

I used to hate stick welding because of welding inconel flanges with stainless rods that were always getting slag inclusions. 7018s are easy.

@rjw7058 3 года назад

are you welding on 1/2" plate?, if so, excellent welds, learning the big stick will help you master 1/8" lo hi, which is the standard for out of position welding. not to many companies will allow 5/32, too cumbersome and not many welders can master it. overhead is easier. i used it on some ships, but foremen said use the 1/8, more productive.

@krissullivan593 5 лет назад

He has some pretty substantial undercut. Not good

@kenyanr1 5 лет назад

Where?

@krissullivan593 5 лет назад

kenyanr1 where not?

@krissullivan593 4 года назад

Vincenzio VonHook are you so bored and confused that it took 6 months to respond?

@jonathanlicudan5889 Год назад

stephen curry is a welder now😂

@johndunn9819 3 года назад

I noticed Andrew uses a good 30-40 degree push, not the 5-10 degree push used by Jody.

@JMRSplatt Год назад

Always learning something about the process. I never knew this type of angle and uphill was even possible. When starting out you learn that the angle behind in a pull helps push the slag however it's clearly not necessary with rod type and technique.

@89RASMUS 5 лет назад

What is the thing with those pancake style helmets? I only see them in clips from over the pond. Is there some advantage over a modern helmet? To me it looks like something belonging in a museum.

@commietube4273 Год назад

Birdseed would like that weld son!

@bryansamples2941 4 года назад

I've been welding fish mouth cut pipes and going around the bottom my stick keeps sticking to my pipe and I can't hardly restart after my first pass, any idea why?

@daviddemoise3526 5 лет назад

That much heat and metal on a coupon that small is impressive! 5/32” is no joke to run vertical on big pieces, it’s super tricky on a small piece that saturates quickly with heat!

@kenjett2434 4 года назад

My hardest issue welding is just finding the right rod for the metal i am welding. I am self taught so sometimes i have to experiment to find the right rod. One of the hardest but most successful welds i ever made was a case hardened steel collar welded to a cast flange on a gas compressor. It ran for years with 150 psi and the vibration of a two stage compressor. Never ever leaked not to bad for self taught in the field. But wish i had more knowledge of the different grades of steel and aluminum it would make choosing rods easier.

@nayanbarua1205 5 лет назад

Very nice welding sir, form Bangladesh.

@benedictojrvirtucio6958 2 года назад

This video is so awesome its so good on welding thats why welding is so nice to be a job more challenges on different position stick welding is one of the hardest on types of welding

@nihatbalci8915 4 года назад

Stringer is stronger than wave because of less heat. Proved by some mechanic tests.

@HSKFabrications Год назад

Uphill 7018 is my Achilles heel 🤣

@ВинокурняСергеевская-р2ъ 5 лет назад

Джони. Отличное видео. Смотрю ваше видео уже давно. Собственно по ним и научился варить агроном. Как вы говорили даже простая горелка с контактным поджигом. В руках профессионала может выполнять 90 %. Всех работ. Вашы видео очень познавательный для тех кто идёт по нелёгкому пути сварщика.

@sychohunter2364 4 года назад

How to weld sir migg welding 1.5 thikness ..powr .and spead...

@eduardoavendano850 4 года назад

Excelent explanation!!! Greetings from México!!!

@tgmod 3 года назад

i have a lot of trouble with arc blow with this size rod on vertical, im going to try a lower voltage like you recommend thanks

@محمودموسوی-ظ4س 4 года назад

👍👍👍👍👍 عالی بود

@wallacewilliams365 4 года назад

Boy you better have that heat on time and be good and fast, that big of rod tends to drip bout half way up. Excellent weld

@raymondquave1237 4 года назад

Can u show this to Bob Moffitt at weld .com this ,, great job that's the way I do it

@darrenimpey5324 5 лет назад

Hey welding tips and tricks can you do a video on mig welding galvanised steel with a mig welder please

@josephmagedanz4070 5 лет назад

Interesting video and demonstration. Always learn something watching your channel. Thanks for sharing. PS Jim Bollinger from DoRight Fabrication gave you a great shout out at the Summer Bash. He said that yours is about the only welding channel on RU-vid that is spot on all the time. Kudos...

@kalebfrancis6688 5 лет назад

Can u do a cast iron to mild steel weld both SMAW and GTAW would really like too learn about that

@jhghkhhjj2125 4 года назад

Deer sir .in this time i hope you in good your movie too good to me .your brather ahmed from iraq

@pedal2dametal686 5 лет назад

Jody can you please make a video testing arc force and hot start features on the esab rebel 205 ac/dc. I see the 285 can handle the 5/32 rods. Debating whether to buy 205 but kind of skeptical if it can run a 5/32 6010...once again thank you for sharing your fountain of knowledge!