Тёмный

Stick Welding Uphill: Techniques and Tips 

Weld.com
Подписаться 1 млн
Просмотров 204 тыс.
50% 1

Paul demonstrates how to weld uphill with stick welding in this video, using the Bohler Fox EV 50 7018-1 H4R rods that leave an easy-to-remove slag.
Are you a passionate welder looking to take your craft to the next level? Look no further than the WELD™ app - the ultimate welding community! With the WELD™ app, available on both Google and Apple stores or through logging in at www.weld.com, you'll gain access to exclusive videos and resources to enhance your welding knowledge and skills.
The WELD™ app is more than just a resource hub - it's a community of passionate welders just like you. Connect with fellow welders and experienced advisors, get your questions answered, and find inspiration to keep pushing yourself forward.
The app also provides a range of educational resources, including tutorials, tips, and how-to videos, to help you improve your welding skills and knowledge. And with the convenience of being able to access all this content right from your mobile device, you can learn and improve your skills anywhere, anytime.
Join us for insightful podcasts and follow us on social media to stay in the loop on the latest trends and techniques in the welding world. Don't miss out on the incredible benefits of being a premium subscriber to the WELD™ app - join us today and take your welding game to the next level!
linktr.ee/WeldDotCom
Disclaimer:
Weld.com is an affiliate and industry influencer that earns from qualifying purchases through our posted and affiliate links. Our videos are provided for informational purposes only and while we strive for accuracy and reliability, we cannot guarantee it. As tools, products, and techniques are constantly evolving, we cannot assume responsibility for any errors or omissions in our content. By accessing our content, you agree to review and comply with our and any third-party terms and policies.
Always exercise caution when using any tools, equipment, techniques, or processes shown in this content. If you are unsure, seek advice from a licensed professional. Any reliance on the information presented is entirely at your own risk. By watching this content, you expressly and voluntarily assume all risks, including but not limited to death, disability, and/or serious physical injury related to the use of any tools, equipment, techniques, or processes. In the event of an injury, seek medical attention immediately.
Disclaimer: As an Affiliate and Industry Influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors, or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.

Опубликовано:

 

12 июн 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 216   
@ajhartjr1205
@ajhartjr1205 3 года назад
I really appreciate this video alot of people edit to make everything look perfect when u out in the real world nothing perfect! Respect
@Welddotcom
@Welddotcom 3 года назад
That's exactly why we don't edit out any mistakes! We would rather show how to learn from them.
@mohammedtroy4296
@mohammedtroy4296 3 года назад
the best welder weld.com ever had was bob moffatt he figured out the science in welding everybody else have issues grand masters dont have to do another plate A SNIPER GETS 1 SHOT IF HE MISSES HE PUTS THE HOSTAGE LIFE AT RISK
@ajhartjr1205
@ajhartjr1205 3 года назад
@@mohammedtroy4296 u must be like me and everyone else not perfect!! Let Bob say he's perfect not u just saying
@mohammedtroy4296
@mohammedtroy4296 3 года назад
@@ajhartjr1205 a great teacher must have a formula to teach his students bob did his research many years ago he talks the talk and walks the talk
@pawes2266
@pawes2266 3 года назад
@@Welddotcom thank u . i made a lot of mistakes and even now after years sometimes something goes wrong and its big mess but most important u show your mistake not hide like 90% of yt welders. and for new welders one tip shop work or test are not even close to real field work when u in lift 70 + ft in the air and everything is moving and shaking
@Allworldsk1
@Allworldsk1 3 года назад
This video was epic. Thank you for the upload. Clear to-the-point straightforward no-nonsense. I definitely learned a lot I appreciate it
@Daniel_D_King
@Daniel_D_King 3 года назад
This video was much better than the last, cleaner audio, much more arc shots, good descriptive monologue. I would have ran lower amperage and kept my strikes closer to the tie ins, but we all have our preferences. Keep up the quality improvements! Great to see the channel getting better again!
@Welddotcom
@Welddotcom 3 года назад
Thanks for the feedback and support!
@Higgins7414
@Higgins7414 3 года назад
I find that keeping my 6010 whips tight and the rod in the bevel shooting through work best for me. Every welder has there own technique they find works for them. Always interesting to see someone else's take on technique. Thanks for the videos always love them.
@danimald.2407
@danimald.2407 2 года назад
Same here.
@jvazquez53
@jvazquez53 3 года назад
Finally a decent and interesting no BS video Thank you!
@sledsports
@sledsports 3 года назад
This video was a lot better. Plug your sponsors and weld. This has a lot better content instead of welding equipment commercials.
@ski5150
@ski5150 3 года назад
That was some really beautiful work. I'm enamored with how much of an art welding is. That was awesome sir.
@TankManHeavy
@TankManHeavy Год назад
I've been struggling with this weld at college for my MMA final assessments, this video made me want to try it again. I thought I was doing something wrong with the arc making keyholes but from what this video shows its natural when V up welding a butt joint. Thanks for the video.
@Laura-wc5xt
@Laura-wc5xt 3 года назад
Dear Paul, thanks for showing us the 3/32 root compared to the 1/8 root gaps....looks like it really made a big difference in quality. I wish I had known how much difference it made back in the day while in school. we are required to use a 1/8 root face and a 3/32 gap on 37 degree bevel open root. I think they had the specs off, but who was I to argue....Best Wishes from Orlando, Paul Brown
@muyashi21
@muyashi21 2 года назад
Man I am really satisfied with your explanation about the root pass and everything else
@williamdegnan4718
@williamdegnan4718 3 года назад
Best view of the work that I have seen in welding video.
@joshuarbanda
@joshuarbanda Год назад
I'm no pro welder but I had to weld some bumpers on a loading dock the other day and let me tell you it was horrible but beautiful for someone with hardly no experience. I had to weld upwards and man that was really a challenge for me blew a hole right in the middle midway up. Still have alot to learn thanks for the tips and showing me how it's done.
@juliusspartacus5437
@juliusspartacus5437 11 месяцев назад
Great video! I find your technique here is what works for me as well👍
@n7565j
@n7565j 3 года назад
Back in the dark ages, (late 70's, early 80's) when we were taught to weld at our local vo-tech school, (yep, I wasn't smart enough to go to college), we were taught that the gap should equal the rod you were using... Not sure if they teach that anymore or if they have new techniques... And it's amazing to see these new machines strike & hold an arc!!! We would have killed for a beautiful arc like that!!! Our old Lincoln/Miller machines were HUGE and HEAVY!!! I can still hear the Mr Pogue saying, "Show me your butts before you leave!!!"... Good times ;-) Well done sir, thank you for showing an old schooler/new sub a few new tricks!!!
@Amp661
@Amp661 3 года назад
From what I learned in school back in 2017, When doing a bevel test plate for structural steel, you can have a space equal to the rod diameter or smaller. I think the biggest gap allowed today is 1/4 of an inch.
@tommyobrien9480
@tommyobrien9480 3 года назад
Good honest video, seeing a mistake is very informative thanks for not editing 👍
@carmenallocco6497
@carmenallocco6497 Год назад
Really super nice weld and instructions, thank you
@popsxbox
@popsxbox 3 года назад
Nice technique even a beginner can understand.
@sawbladeheaddesigns2451
@sawbladeheaddesigns2451 3 года назад
Another great welding video!
@markculler3193
@markculler3193 3 года назад
Thanks for the video I learned a lot about virtcal up welds
@drumtwo4seven
@drumtwo4seven 3 года назад
Welding uphill stick... very fun 👍
@xc5371
@xc5371 Год назад
Great video teaching me more than my instructor does
@derekgreen7319
@derekgreen7319 2 года назад
This guy's arc strikes are amazing
@americathefree3708
@americathefree3708 3 года назад
My biggest problem was penetrations on open gap... Thanks for the help brother!
@kimchiwelder8410
@kimchiwelder8410 3 года назад
thanks Paul!👍👍
@Solorivera
@Solorivera Год назад
Nice informative video thank you.
@WelderB1Family
@WelderB1Family 2 года назад
Great information thank you
@kingnoobie9614
@kingnoobie9614 3 года назад
And he corrected it GGs sir 👌🏽respect
@melvinalex330
@melvinalex330 3 года назад
Good job sir. Appreciate the arc shots and all the advice. The way that arc kept cutting out in the root, I think it might have been the machine there because from what I saw, you kept the arc length consistent. Did you change anything else for the root pass on your 2nd plate? Like arc force or amps? Anyway, good stuff. Keep it coming
@hpk4917
@hpk4917 5 месяцев назад
Great, just great. Greetings from Austria.
@blueweld75
@blueweld75 3 года назад
Yeah Paul!!!! Your getting more and more comfortable! I dig this video. I like how you are telling us what you are doing and why you are doing. Also the the little things like talking about the width of the weave and its allowance. Those little details make a difference. I been about half and inch when i go to restart. Iam going to see if i like this 3 -5 inch distance.
@cent-rq4wn
@cent-rq4wn 3 года назад
Look very professional sir..
@welderleekoreanwelder4273
@welderleekoreanwelder4273 3 года назад
실력이 대단하시네요😄
@general5104
@general5104 3 года назад
THANK YOU SO MUCH for a nicely done vertical weld test training video! I've got a question...your rod angle is real steep. {{ Way back (when I was a student Tool & Die Maker, that was a professional Electrician); repairing welding equipment in our local tech school, I would listen in on what the welding instructor would be telling his students. He would say, "The straighter in your rod is, the stronger and prettier your bead will be." He caught me evesdropping on his class and envited me in on his class-room discussion. He found out my experience level in the Machinist and Electrical fields and tutored me, when he could in welding professionally.}} That being said, I have tried to keep an almost straight-in rod angle and run a "U" pattern up-hill, for most of my life. My health vs age has made me shakey...so I Mig more than stick, but I watched you running your cover-pass with the rod angled up, and needed to understand that concept. Does it splatter real bad, like its throwing metal, or does DC act better about not doing that than AC does? Bill from Tn. 🇺🇸
@PrfectRoll
@PrfectRoll 2 года назад
awesome video! my mentor actually uses this technique and tried to teach me but the language barrier was really tough. IMO, this is one of the harder techniques to learn. Thanks for awesome video!
@howardaumiller581
@howardaumiller581 3 года назад
I work for Airgas, love the cylinders in the background!
@somethingabouttractors241
@somethingabouttractors241 3 года назад
Good stuff
@chrisking7881
@chrisking7881 3 года назад
Nice!
@derekgreen7319
@derekgreen7319 2 года назад
Dude is a beast. It's hard to run 7018 like that
@SAXONWARLORD1000AD
@SAXONWARLORD1000AD 3 года назад
i aint no expert but that technique on the first root with the big jumps foward then back seemed kinda ineffective with the arc going out and restarts , as we saw on the backside of the plate - then your technique looked different on your 2nd root with much better results - thanks for the video - we're always learning
@elkvis
@elkvis 3 года назад
I noticed on the second root that you didn't whip out of the puddle nearly as far. was that more because of the wider gap, or did you turn the amps down a bit as well?
@Ehinoa
@Ehinoa 3 года назад
really at a 3/32 gap i believe he shouldnt have whipped it but thats why 1/8th worked well, he must be used to that fitup the most idk
@rudychacon7175
@rudychacon7175 2 года назад
Different rods burn differently too
@loseyourlife4042
@loseyourlife4042 2 года назад
Good stuff💥💥💥
@SubKamp
@SubKamp Год назад
Hi really love the video It helps me a lot !!! Quick question… Do you let the rod touch the material or do You keep it just off ?? Gr Mikey from the Nederlands
@johnb1820
@johnb1820 3 года назад
Nice
@patriotskingnation8084
@patriotskingnation8084 3 года назад
Nice good tips ! Vertical 6010 is the hardest
@Amp661
@Amp661 3 года назад
Practice every day. 6011 and 6010 kicked my ass in the beginning, but be dedicated, and you WILL see improvement. Works for me.
@reynaldoperez2916
@reynaldoperez2916 Год назад
Awesome
@petar443
@petar443 2 года назад
Hello. Can you make video on 1G outside corner joint of a 3/8 plate.
@guycrawshaw
@guycrawshaw 3 года назад
Who’s this dude where’s the other fella
@Welddotcom
@Welddotcom 3 года назад
This is Paul Sableski, we have a variety of hosts now!
@williamheaven8983
@williamheaven8983 2 года назад
We want bob!!
@JameGoFast
@JameGoFast Год назад
What other “fella”
@ArcEyeJames
@ArcEyeJames Год назад
@@williamheaven8983lol
@zenjon7892
@zenjon7892 10 месяцев назад
Does it matter?
@SoobDoob18
@SoobDoob18 3 года назад
I have the same welding jacket 😀
@83redmustang
@83redmustang 3 года назад
I just bought a Lincoln inverted v275s which tig torch do you recommend
@Laura-wc5xt
@Laura-wc5xt 3 года назад
the statement at 4 minutes about 70,80,90 series rods needing stored at 225 to 300 degrees is incorrect. 6010-9010 rods are to be stored at room temperature. The higher temp storage will deterogte these non low hydrogen rods. XX14 and XX24 , are to be stored at 125 degrees farenheit, along with XX12, XX13,AND XX22, WHICH ARE USUALLY 60 SERIES but of the same Rutile type as XX14 AND XX24
@eduardosampoia5480
@eduardosampoia5480 3 года назад
he was referring to low hydrogen rods
@sledsports
@sledsports 3 года назад
You mentioned xx12 and xx22.... I hadn't heard or seen anything bout these for years... like a couple of decades
@tejaswelding5230
@tejaswelding5230 3 года назад
When he said that he was still talking about xx18 LH rods. He was talking the tinsel strength of the rods.
@LuisOrtiz-vs3wm
@LuisOrtiz-vs3wm 3 года назад
Can you do a video on a 1/8 7018 cap on 6in pipe? I been struggling on getting from overhead to vertical, it’s dripping and has undercut. Thank you in advance.
@winterswelds54
@winterswelds54 3 года назад
Your travel speed and angle might need adjusting. If you understand the difference between push/pull you should get it fast. But always practice each time that you can. Highly recommended.
@winterswelds54
@winterswelds54 3 года назад
Try this technique each time that you stop at the count 1 one thousand then move. The under cut you are getting is because you are leaving the toe to fast thus pulling material from the wall. Just slow it down a bit and check that you amps aren't too high.
@gilbertb8078
@gilbertb8078 2 года назад
I work field as heavy equipment mechanic.7018 is spec by Caterpillar. Try that with out in field.Metal gets warm and grease starts dripping into you weld.We hired super welders but they all dragged up coz it's a dirty job .We all can run pretty up hill welds using 7018.
@salimatiyeh7472
@salimatiyeh7472 3 года назад
I've been stuck on my vertical 6010 root for almost 4 weeks in school.. Sucks but I'm almost there
@salimatiyeh7472
@salimatiyeh7472 3 года назад
Nvmd just passed this morning 😁
@salimatiyeh7472
@salimatiyeh7472 3 года назад
@Paul Sableski oh yeah I've been watching... Thank you for all of these tutorials, they have been helping me so much
@MasterCheeef
@MasterCheeef 3 года назад
Yikes it took you a month for 1 position?? in the course I'm in right now for Canadian red seal we have 4 coupons, one for each position and 1 dual position coupon for 2g gtaw open root then fcaw fill and cap in vertical. We have a month to pass each coupon in preparation for the real Red Seal exam.
@jaredhammonds8255
@jaredhammonds8255 10 месяцев назад
I haven't run stick in years. Is it normal to tie in to a weld with the slag still on it? I'm referring to the start and stops.
@gilbertb8078
@gilbertb8078 2 года назад
We weld cracks in hydraulic tanks or fuel tanks using 7018.Trick is have tank full.Weld through the oil or fuel.Never weld on empty tank,that will explode and kill you.Feel lucky, drop a pound or more of dry ice into tank before welding on empty tanks.Dry ice displaces oxygen and you can weld on empty tank.Do it if you feel lucky .
@kevmarpnky
@kevmarpnky 2 года назад
that keyhole on ur first root was gigantic. could see getting fusion issues or inconsistencies with that technique
@KChan33333
@KChan33333 3 года назад
Dude where did Jason go?
@redbird1824
@redbird1824 Год назад
Modern ASME industry standard is the 2 inch 6G ,schedule .344 wall test. It qualifies the operator for pipe wall thickness up tp .688 wall. The uphill root bead became obsolete back in the 70s with the invention of high penetration welding rods like the German cell-80 that was used on the Trans Alaska pipeline.A down hill rod. American high penetration rods soon appeared and have been used now for 60 years in the industry.7010s and 8010s coupled with 8018 fillers and caps.Most pipe and tube welding procedure TODAY are downhill root,downhill hot pass and uphill with the 8018s ie filler and caps.The trans Alaska pipeline done to API standards [not ASME] was downhill all the way using the 8010 seres high pen rods.Before that were mostly navy trained welders who were taught to uphill everything.Its much slower and produces more unwanted localized heat.The young an who test today will likely take the 2 inch test.Its x-rayed and it is cheap for employers.So that young person would do well to learn downhill root and hotpass on the ,344 wall boilertube with 8018 filler and string bead cap.NOT WIDE CAP.Beads can only be 1 1/2 times the diameter of the rod used..For instance 1/8 rod would be 3/16 wide max.For young people ASME stands for American Society of Mechanical Engineeers.API [less stringent] stands for American Piping Institute.Also 6G stands for pipe test done at a 45 degree angle as opposed to horizontal or vertical test.
@secretmulletman7984
@secretmulletman7984 3 года назад
Vertical up and overhead are my favorite welding positions
@jeepwk6.5L
@jeepwk6.5L 3 года назад
Says no one ever
@sledsports
@sledsports 3 года назад
I'll lay it flat anytime I can
@jeepwk6.5L
@jeepwk6.5L 3 года назад
@@sledsports right, who chooses to have a slag shower. I weld pipe but I’d choose a roll out over an overhead 😂
@secretmulletman7984
@secretmulletman7984 3 года назад
Anyone can do flat welding, but it takes skill to do overhead and vertical up you got to be diverse. A good welder welds all positions in all kinda of weather and in anyplace uncomfortable or not.
@jeepwk6.5L
@jeepwk6.5L 3 года назад
@@secretmulletman7984 never said I couldn’t do it lmao. I make x ray welds every day. But I’d jam out and do some roll outs anyday over an over head
@valtteri7196
@valtteri7196 2 года назад
I have to do this same joint but i just weld te first root and then grind it from the back so there is a little growe between the plates and the weld dont know what it is called in english can some one help me
@bentemba3689
@bentemba3689 3 года назад
Or you can use Titanium Pipe cut in the middle to guide the Weld pool, but you have to Grease it with Heat resistant Grease.
@sledsports
@sledsports 3 года назад
I think the rod angles were way too aggressive but it worked out well. Maybe film angles exaggerated that.
@Lasick312
@Lasick312 Год назад
WHAT WERE YOUR AMPS ON THE CAP RUN?
@StoneUFO
@StoneUFO 3 года назад
Thanks for the tips, new blood on the channel. You know what Bob is up to these days?
@Welddotcom
@Welddotcom 3 года назад
Bob is teaching full time right now and he's also launching his own channel and we hope he will back soon with us as well from time to time.
@Amp661
@Amp661 3 года назад
Need Bob back. Can't wait to see his welding channel and subscribe.
@lilnate03
@lilnate03 Год назад
if you'll notice you're preheating metal that you do not want to with those high upwards strokes on the root, you want it to be "relatively cool" when you pass over. a lot of new welders would definitely blow through with this method. edit* or not penetrate enough like you did
@daanvolvo5719
@daanvolvo5719 Год назад
What diameter rod and amp/ arcforce settings?
@brandonjennings8925
@brandonjennings8925 3 месяца назад
I’m lead hand on a rock crusher and anytime i have to up hand on our trash equipment i hate my life. It’s either i keep sticking or i’m to hot and it ends up a gob show. Any pointers?
@mikehouser6940
@mikehouser6940 4 месяца назад
My grandfather taught me how to weld he made me master 7018 vertical that was about 40 years ago I’m 54 now and weld and fabricate for a living .
@carof08
@carof08 3 года назад
My area it's 7018 all the way out no risk of 6010 hydrogen cracking it's loaded with it
@danimald.2407
@danimald.2407 2 года назад
Love the smell of stick rod........
@mikedriver2147
@mikedriver2147 Год назад
I can't find where to order these bohler rods 1/8 7018! any help would be appreciated
@whistlindixiesmallengine2085
@whistlindixiesmallengine2085 3 года назад
I miss bob
@jray1298
@jray1298 3 года назад
Same
@seyelk59
@seyelk59 3 года назад
There's a huge misconception with the weld when you get to the top. It's not that the weld gets hot, it's the magnetic field that's being created is pushing your weld downward. Really clean audio, too.
@spencerseedig3380
@spencerseedig3380 2 года назад
You are wrong
@seyelk59
@seyelk59 2 года назад
@@spencerseedig3380 No I'm not.
@robertblackshear8963
@robertblackshear8963 Год назад
@@seyelk59 Actually you are wrong. The magnetism that's created pulls the weld inward. The sheer heat rising upward in conjunction with the approaching electrode synergistically over heats the metal at a given travel speed.
@kendraspencer5703
@kendraspencer5703 Год назад
Isn't the splatter on the side are going to make you fail the xray test?
@darkside2326
@darkside2326 Год назад
@9:25 "You are not supposed to go over one and a half times the rod size on the weave". Where do you get that information? AWS D1.1 does not address it. Maybe another code?
@kingnoobie9614
@kingnoobie9614 3 года назад
Even pros make mistakes
@goatsinker347
@goatsinker347 2 года назад
This guy reminds me of Karl from that 1996 movie; Sling Blade.
@PATHvers1ty
@PATHvers1ty Год назад
What safety glasses is he wearing?
@scotthares
@scotthares 2 года назад
When there's slag, you drag. But up hill not so much. Looks more like a push?
@brucearnold6259
@brucearnold6259 2 года назад
Do that upside down at about 25 degrees laying on that one stone you missed, I’m sure you have to thanks for the video
@axemastersinc3269
@axemastersinc3269 2 месяца назад
What year did they start that crap? That cap looks horrible. One and a half times the rod thickness?
@SuperDuke44
@SuperDuke44 3 года назад
Wen u change rod turn down 5
@raginroadrunner
@raginroadrunner 9 месяцев назад
all of my aluminum gravel trailers are mig welded downward. So are my steel trailers.
@korpilombolo1
@korpilombolo1 2 года назад
Do an x-ray on that. Would like to se if there is pores in The weld.
@Kevin-is-here
@Kevin-is-here 3 года назад
So when you test you don’t recommend cleaning the tie in?
@1Guason3
@1Guason3 3 года назад
It's better if you do. Feather it in too.
@Kevin-is-here
@Kevin-is-here 3 года назад
@@1Guason3 that’s what I was always told
@fusiongurudotcom8195
@fusiongurudotcom8195 3 года назад
You want to clean and feather it.
@jeepwk6.5L
@jeepwk6.5L 3 года назад
Starting up Going back into a keyhole you don’t need to. Tie back in to a tack or back into start up feather it.
@sledsports
@sledsports 3 года назад
@@jeepwk6.5L pretty sure they are taking about the low hydro fill and cap .
@mattfogarty8144
@mattfogarty8144 3 года назад
You don't need to whip an open root if your heat is set right you can drag it all the way
@jeepwk6.5L
@jeepwk6.5L 3 года назад
Good to know how to whip though because in the field you’re going to have a bad fit up here and there.
@mattfogarty8144
@mattfogarty8144 3 года назад
I just think for beginner its easier to teach someone to stick the rod in and drag that's all and if the gap starts closing up tell them to slow down if it opens up speed up it's just easier to control if you put a good land on your pipe or plate in my opinion that's all
@kkb1258
@kkb1258 3 года назад
The red lava dropping is that the slag
@1Guason3
@1Guason3 3 года назад
Yeah
@jeepwk6.5L
@jeepwk6.5L 3 года назад
No it’s lava
@OldGuy70s
@OldGuy70s Год назад
that looks more like a Weavving motion to me... Stringer vs Weave.?
@ronaldrevell4527
@ronaldrevell4527 Год назад
How far up are you going looks like an inch
@lovejago
@lovejago 3 года назад
Run a little hotter!!!! than Colder!!!!!!
@ninesixteengenetix
@ninesixteengenetix 2 года назад
Bring Back Bob
@1Guason3
@1Guason3 3 года назад
On the first root, it appears you whipped too much and thus making it not get full penetration.
@jedediahsibley3355
@jedediahsibley3355 3 месяца назад
If you didn't do that dramatic up and back and did a bit more of the side to side like the 7018 that 6010 root would have ben butter
@ghydeon
@ghydeon Год назад
bruh my local doesn't use 6010 for the root pass
@as0369
@as0369 2 года назад
Up hill with stick 6010 root 7018 cap
@MasterCheeef
@MasterCheeef 3 года назад
That 6010 root on the first coupon looks like SHIT, why would you continue to cap when that root would tear open when bend tested.
@peetky8645
@peetky8645 2 года назад
no closeups of the root backside is telling
@hughesweldingservice
@hughesweldingservice 3 года назад
Ive always preferred a 1/16 land and 1/16 gap. Stick it an drag it up.
@Fab2Mc
@Fab2Mc 3 года назад
😀😀😀😀😀😀😀😀😎
@JeZZe26
@JeZZe26 5 месяцев назад
No chipping slag off before restarts hmmm 🤔
@garymullan6433
@garymullan6433 2 года назад
I don't like the rod angle with that 7018
@tomrobards7753
@tomrobards7753 3 года назад
The temperature can affect you how your rod Wells not the heat of not the temperature of the welder but of the atmosphere
@michaelchadwick3497
@michaelchadwick3497 3 года назад
Got nothing to do with it.
@Laura-wc5xt
@Laura-wc5xt 3 года назад
@@michaelchadwick3497 what did Tom try to say?
@1Guason3
@1Guason3 3 года назад
@@Laura-wc5xt from what I could tell, he was referring to the temperature of the room you are in.
@michaelchadwick3497
@michaelchadwick3497 3 года назад
@@Laura-wc5xt Hell if I know.
Далее
Flux Core Welding Fundamentals
12:36
Просмотров 121 тыс.
6G Stick Welding Test | Open Root 6010 & 7018
15:19
Просмотров 1,4 млн
How to Measure ANY Cliffs Height with a Rock
00:46
CWB Structural Weld Test | 3FG Vertical Stick Welding
17:51
6013 Tips and Tricks and Arc Blow Demo | MIG Monday
15:04
Learn to weld pipe root and cap 7018
13:34
Просмотров 2,7 млн
3G Open Root Plate Test | 6010 & 7018 | Stick Welding
12:59
Why Use High Current TIG Welding?
14:32
Просмотров 951 тыс.
7018 Uphill & arc force
10:08
Просмотров 325 тыс.
Stringers vs Weaves
29:25
Просмотров 842 тыс.
Help! I Can't See When I'm Welding!
10:08
Просмотров 1 млн
How to Measure ANY Cliffs Height with a Rock
00:46