STIHL MS291 Chainsaw Review Video

Подписаться 403 тыс.

Просмотров 127 тыс.

50% 1

STIHL MS291 Chainsaw Review
In this video I review the STIHL MS291 chainsaw.
MS 291
en.stihl.ca/STI...
MS291 C-BE
en.stihl.ca/STI...
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Tecumseh, Dolmar, Makita, Poulan, Ariens, Briggs and Stratton, Murray, John Deere, Craftsman, MTD, AYP, etc.
Help me make videos or buy me a beer!!
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
If you enjoy my videos make sure to comment, share, thumbs up and subscribe. Thanks for watching!
Easy to follow and thorough step by step tutorials do it yourself (DIY) to help you with your broken lawn and garden equipment including snowblowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed wacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on RU-vid and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on RU-vid to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
#donyboy73 #db73 #smallenginerepair #howto

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 161

@justinwright6611 3 года назад

I have had my 291 for more years than I can remember. Not long after they came out in Australia. I can’t fault it never had a problem with it. Muffler Mod really woke the saw up and realised it’s full potential.

@pierrerajotte1018 3 года назад

I have A ms 291 purchased a year ago. There is no push button for priming.. it is the most difficult saw to start that i ever had. When it is going it is great. I will trade it in for something that is easier to start. When i see owners just starting the saw with a few pull i envy them. There is so much compression that when I pull the whole saw wants to raise of the ground. Pierre

@rcrbrewster7840 6 лет назад

*Just bought one* ... *LOVE IT* ... *POWERFUL*

@glenngressley3345 8 лет назад

thanks so much for taking the time to do what these videos. you have no idea how often we view and refer back to them. thanks again.

@BrucesShop 8 лет назад

Great review. The older I get the easy start seems to make more sense.

@CaseyBDook Год назад

It's good to see people like this saw. I bought one a while back and it's been excellent so far. Starts really easy every time. My Poulan PL3816 is adequate for my property with a 14" bar but it's not as reliable and the Stihl cuts these small trees so fast.

@987kestrel 8 лет назад

I have the 211c, and was kind of on the fence about the easy start. But I bought it so that my family could start it if I was not there. I have grown to like it a lot. It works really well, you just have to get used to it. Granted, I have not used it very much, but for my application it fits my needs nicely.

@dennisshaughnessy5612 2 года назад

We had a storm come through here last week so I just picked one of these saws up yesterday. I have a Stihl 029 that I bought in 1993 but I guess it's getting long in the tooth as it wouldn't stay running long enough to deal with the tree that came down on my property. But anyway this new saw went through some 9 and 10 inch cuts very efficiently. I'm looking forward to many years of cutting fun with this saw.

@ice25781 8 лет назад

A really great saw. Bought it back in 2013 with a 18" guide bar and a 3/8 pitch chain. Nice smooth operation not heavy and easy to maintenance. Lots of common parts with the MS261. The clutch, the petrol tank, the air filter are some parts that are the same in both saws. Anyway the saw served me good for a short time, withhout any problems, until the day that it got stolen.

@lovestihlquality1369 8 лет назад

There's not a Hell hot enough for sack of sh__ saw thieves!

@99carnot 8 лет назад

Good looking and running saw. Nice it has a 20" bar. Thanks for reviewing it!

@donyboy73 8 лет назад

+99carnot have a good weekend steve

@gabrielchiodo7454 2 года назад

I have an important start up question with this MS291 starting this is with the chain break disengaged correct? So when the engine actually starts the chain is moving correct then you click the trigger so it goes into idle mode and then if you want you can engage the chain break correct?

@robertcolford 3 месяца назад

Just bought a 290 & a 291C both like new with case extra bars chains manuals all for $700.00 i think a good deal

@94SexyStang 4 года назад

Just got a MS291 for $100......someone left it outside for 4 years straight......started RIGHT up!! Runs perfect....Although it's a good saw, a NON-adjustable oiler is a huge problem if you cut Hard stuff, or Pine/Sap.....you risk burning up parts. The MS290 is a better saw....adjustable Oiler, parts are Dirt cheap Everywhere on ebay....and you can drop in a MS390 Top End!!

@kokaneeflyer9235 3 года назад

I bought one of these saws (non C model) new when they came out. I bowed to peer pressure and moved from Husky. It does perform well and can be a pleasure to use but it has always had it's little shitty points. First start of the day has always been a real bear, once running it's good for the rest of the day. I've never liked the bar oiler, not enough oil and the bar gets hotter than I like but dealer says it is the way it is supposed to be. Now the choke linkage system has screwed up and the dealer was nice enough to tell me up front that I had better go re mortgage my house if I wanted him to fix it. So now I am trolling the internet looking to see if someone else has had this problem to find enough information to fix it myself. Over all I am really disappointed in the build quality of this saw and kind of wish I had stuck with Husqvarna.

@larryspiller6633 3 года назад

I' almost convinced a certain brand of orange and white colored equipment isn't what it once was. Almost believing perhaps it never was all it was made out to be.. Too much money already invested in all of it to scrap it. So I come here to keep up with it.

@brianhinkle635 7 лет назад

I like your videos you really know your stuff but I'm going to say I'm so thankful that I live in the u.s. that saw that exact same saw I can currently pick up for for $449.99 at 6% sales tax.

@cutchopweld5717 6 лет назад

Brian Hinkle with the current exchange rate(1.285) the prices are alot closer than you think. $128.50 to every U.S $100.

@shawncapps1826 8 лет назад

Don. You Did Extremely Great Job Cutting Log With Stihl MS291.

@TheHanalf 5 лет назад

from what is see the main difference between the MS291 and MS291 C is the weigh, without easy start, it weighs 5,6 Kg and with the easy start 6,2 Kg. and great video =)

@gabrielchiodo7454 2 года назад

How come they say to start these chainsaws with a brake on but if you do that with this won’t you burn out the clutch? That’s how I burnt out my clutch so to start this particular chainsaw the brake is off (disengaged) when it starts up you hit the trigger so it idles then you can use the break correct?

@LivingFaith2 7 лет назад

GNutter, I ran a 26 for years. It was a fabulous saw!

@flyboy2610 5 лет назад

I love my 290, it is a bit heavy though.

@allamericantreeservice3754 2 года назад

I've got the 290 and 291 and I believe my 290 plows through logs much easier but 291 is lighter and not far behind.

@jonathanbosco8458 8 лет назад

Thanks excellent saw in the past used the fire fighter version.

@billm3210 2 года назад

Got the 290. 10 yrs cut 100's of trees. Taken a beating, Dropped you name it. Thing just wants to live. Plus this 291 C looks like it was bit on the weak side cutting a tree only that big. Maybe needs to be worked in. But Till my 290 dies, I'm sticking with it. It's paid itself more times than I can count.

@gnutter395 8 лет назад

I,m still running my 026 which I brought in 1992

@andrewford80 7 лет назад

G Nutter good saw!

@TheHanalf 5 лет назад

your saw just turnd 27, like me =)

@TheWoodsmanMilling 5 лет назад

I have an 028 from 1985!

@chrisaxling 4 года назад

G Nutter My 026 was handed down to me by my father. The bar says “Made in West Germany”...

@1ljs 8 лет назад

Don, Maybe you could do a quick video showing what the easy start system is and how it works and give us your impression of it' reliability.Thanks. LaVern

@donyboy73 8 лет назад

+1ljs as soon as I get time

@1ljs 8 лет назад

+donyboy73 Thanks.

@lovestihlquality1369 8 лет назад

DB, These chain specs are odd for Stihl. The .325 pitch always had. 067 gauge and 3/8s are .050. Stihl brand chain series begin with 26 and 33 respectively and are widely available. A 325 / 50 would be a '23' series. Curious if Stihl changing over all the .325 pitch to .050 guage?

@lovestihlquality1369 8 лет назад

I meant .063 gauge on .325, not 67

@semco72057 6 лет назад

That is a nice saw, and I would like to have one like that which runs that good. The MS 250 I have have never run right since owning it, and so far the new Poulan Pro I just purchased is a dud also. They both are currently in the shop being repaired and I am using my pole saw and old Poulan when it cranks.

@pyroman6000 2 года назад

Interesting to see the differences between the 291, and the 291C. I have the former, and it does not have ez start, or the toolless chain tensioning. Mine also does not have a primer bulb. The rest looks much the same, except this is 55 cc's. I haven't had the chance to use it yet- too much already cut wood to process before I go and get more! I got this, because the saw I already owned was having real trouble with the big semi-dry ash, and huge honey locust and silver maple logs I have access to. (part of the problem was that it was very dull- esp on one side- and my less than great efforts at sharpening it didn't help, lol) This saw should be able to handle it much better. I'm not turning down free Ash and Locust- big or not!

@allamericantreeservice3754 2 года назад

You can upgrade and if you have not mod your exhaust I would suggest that. The saw will really come alive

@SeriousSchitt 8 месяцев назад

Each time the chain goes dull, toss the saw and by a new one? I’ve never heard of that one before, I guess it wood work alright though, if the alternate is to sharpen the chain correctly?

@SnoStig 8 лет назад

Can you do a review of a stihl ms 261 comparing it to the ms260?

@redneckeliot032 7 лет назад

The reason I hate the easy to start feature is you can't tell if you have a scored cylinder unless if you take off the muffler.

@SupramanTRD 2 года назад

Does the brake handle click into place? Or is it spring loaded?

@hanscierson85 2 года назад

hello how can I find out the date my ms 291 c was made thank you.

@jensenwilliam5434 2 года назад

Thank you!!

@shawncapps1826 8 лет назад

Hello Don. That Is Stihl MS291. Looks Extremely Nice.

@donyboy73 8 лет назад

+Shawn Capps yes thanks

@shawncapps1826 8 лет назад

Anytime.

@brianeastman3547 8 лет назад

Looks like the Dolmar PS 5100s chainsaw

@MrSparkums 8 лет назад

Hey Dony.. Any chance you can do a how to on replacing the bar adjuster on the MS291? I haven't found a single video on how to do it...? Man this thing is driving me bananas. I picked it up for $100, needed a new sprocket bar chain and carb kit, but I noticed now the adjustment screw is broken, so trying to pull it but, I can't get the thing out!!! Anyway, great vids!!

@terryhennessy265 8 лет назад

Tool-free caps, chain, and air filter, BUT Torx top cover does not make sense to this old man

@schwinglo 6 лет назад

The tool that comes with it has a torx head on one end, and a sparkplug socket on the other.

@dstevenpaisley 8 лет назад

I have a 034 and had it for about 26 years and I use my saws Regularly .I heat my house camp and garage with wood from my wood lot.I have rebuilt it once as it got down on compression. I always use high test gas and castrol oil.and never let mixed gas set more than a couple mths.I love my stihl .Also have 4 other smaller saws i use for the light stuff .I would never buy and outher echo saw .Have two both leak chain oil bad will empty out a tank over a mth.dealer tells me thats normal.Ya right

@johnstafford2402 4 года назад

D Steven Paisley using 4-stroke engine oil in your 2-stroke gas/oil mix?

@robert3553 8 лет назад

I had a Still chain saw and it over revved and blew up. Oil and fuel mixture was fine. The saw lasted maybe 3 years. Also, I always had trouble starting it. I payed around $400 for the saw. He's what I'm getting at. I went to Sears and bought a 20" Craftsman chain saw for $180 and I've had it for 12 years now. The saw is beautiful. I've cut down approximately 100 trees and completely cut the trees up for firewood. So before you spend $500 on Still why not consider paying half for a no name brand. Trial and error has taught me that brand name products alway's cost more. note: I am not saying anything bad about Still products, I personally think their a good quality saw. I just believe you don't have to buy brand name products to get good quality merchandise.

@timewa851 8 лет назад

+Robert T I was doing that math too, cheap "50 hour lifespan" saws for 75-85 USD, with name brand 300 hour saws at 500+, you can buy a half-dozen throw-aways, with fresh bars & sharp chains.......& still be $$$ ahead.

@robert3553 8 лет назад

I paid $180 for my Craftsman 20" and have no idea what hours are. But the saw did fall out of a tree about 15 feet and bent bar and ruined blade. Put new bar and blade on and it started up on first pull. That was 5 years ago. I used to think expensive tools were the best. Now I compare specs and read comments before I buy. Sometimes you get lucky sometimes not. Just trying to stay ahead of the game with all the overseas outsourcing.

@timewa851 8 лет назад

+Robert T the recent products have hours of operation stickers, this Stihl has it on the inside of the operators handle, you can see it in the video, @ 1:05 with other manf. info., it's the expected service life of the engine, or Stihl,in this case, is calling it "emissions warranty".

@CowboyAxe 6 лет назад

lol funny, that means all my saws I use daily wore out years ago... crock of sh-t you said.

@CowboyAxe 5 лет назад

@@timewa851 Yes it is that... saws like that some have way more than 500 hours of life.

@SpeedracerrdDay 3 года назад

Id love to buy that saw.

@SpeedracerrdDay 3 года назад

When I saw your vid I wanted one like it but sadly they discontinued that model. Hopefully I'll find a used 291cbe one day...

@dejan9713 6 лет назад

Hi Don, Can you give me advice for my new chainsaw? Which will be your choise between stihl 271, echo 590, husqvarna 455? Thanks

@donyboy73 6 лет назад

Stihl 271 would be my choice between those 3

@ryy597 5 лет назад

echo would be the best bang for your buck, its a big saw tho. i wouldn’t even consider stihl products, the homeowner/farmer saws from stihl are made in china. you always have to mess around with the carburator, they are really hard to start. i would stay away from them

@TheWoodsmanMilling 4 года назад

Might want to consider biting the bullet and getting a 261. Pro saws are better. But, thats just my 2 cents.

@SteveRobReviews 8 лет назад

Don which do you think are better these modular drop in design engines or the split cases on the pro saws for longest lasting.

@donyboy73 8 лет назад

+Steve Rob the pro saw design for sure

@robertmunguia250 8 лет назад

Hello don, I have the ms290 and it's been great. I just wanted to see if there is a replacement choke lever to start it. sometimes it stays stuck.

@donyboy73 8 лет назад

+Robert Munguia you're best to replace it

@alcoholicsincebirth 8 лет назад

Very good review!

@wtbm123 8 лет назад

I thinking i like the air cleaner . I am still using my 029 , never was a fan of the old filter

@TheWoodsmanMilling 4 года назад

I'm thinking about buying my uncle's 029. It's in good shape, but he doesn't use it.

@masons962 8 лет назад

Can you make a video on all of your equipment that you have

@eliasholtsoi7045 6 лет назад

Can I put a 3/8? If chain the bar and sprocket.

@callummurphy02 7 лет назад

So we bought one last fall, has about 10 hours of use on it, stopped working, opened it to see what was going on, pieces fell out, over 300.00 to fix and warrenty void because we opened it! I would never recommend this.

@joepadilla8802 Год назад

I have a Stihl chainsaw but the rope doesn't work I tried to pull it but it won't fired up don't know what's wrong dude

@larryrobinson7492 8 лет назад

I've had a MS290 for about 10 yrs, have never had anything go wrong with it whatsoever, love it. Yes I've cut lots of wood over the last 10 yrs using only this saw. Thanks for the review. Still not sure which one is better. I think the 291 just has more emissions stuff and newer technology for different altitudes maybe. That Chain you were using. "SUCKED" kinda ruined the review for how well that saw could work. Most likely a dumb 26RM3 chain.

@norcoauctions 7 лет назад

you are the best

@JPilot2 8 лет назад

Don, I do like the STIHL MS291C! A really nice chainsaw! Cheers! :-)

@kevinbushell2746 4 года назад

291c is not available in G B nor 20" 325 bar I didn't like easy start till Steve's small engine saloon showed how to start maybe you could show your viewers

@94SexyStang 6 лет назад

I prefer the ms290.....BEST selling saw ever.....you can get an Entire Motor assembled for Under $50.....you literally cannot go wrong....although they Are heavy as shit.

@drewthornton4684 8 лет назад

thanks

@luuuk7534 6 лет назад

Only 599$? In Germany the C-BE Version costs 750€ (!)

@reazmohammed9686 8 лет назад

What's the top brand saw in your part of the world? in Trinidad it's Stihl.

@donyboy73 8 лет назад

+Reaz Mohammed STIHL/HUSQVARNA

@lee9869 8 лет назад

Can u do a 361 review?

@fullsteam208 8 лет назад

Nice!

@jamesmullins3219 8 лет назад

good video and a good saw

@donyboy73 8 лет назад

+James Mullins thanks

@smittys19daytona 7 лет назад

I think pretty soon there going to completely weld the mufflers shut to make sure no emissions escape to the environment lol looks like it could use a few mods to wake it up

@iwantosavemoney 8 лет назад

the 290 is a commercial saw right? 291 is not am I correct or not thanks for any information sir.

@donyboy73 8 лет назад

+iwantosavemoney the 290 and 291 are farm saws, semi pro versions

@iwantosavemoney 8 лет назад

+donyboy73 ok thanks for the information sir

@gogleplussucks2896 8 лет назад

Great video, thanks! Nice feature those captive screws in the top cover.

@geoepi321975 8 лет назад

Whats the compression of it Dony

@donyboy73 8 лет назад

+geoepi321975 I DIDN'T DO A COMPRESSION TEST

@josh33025 8 лет назад

homeowner saws are OK but I stick with the professional saws. they always are about a pound lighter than their counterparts and less cc's with more power. yes they cost more but we'll with it. also huskys seem to be a little lighter than stihls.

@scottfurlong5475 6 лет назад

josh33025 The pro saws are out of reach for a lot of people. I'm looking to buy a 50cc-55cc saw and I can't justify $800-$900 when a farm saw will do. Love to have an MS261 but they just don't go on sale. I can get an MS291 right now for $500 Canadian.

@johndasilva3638 3 года назад

What fuel ratio

@donyboy73 3 года назад

I mix my fuel at 45:1

@drewthornton4684 8 лет назад

hi don what's the difference between drum.and.rim sprocket on a chainsaw

@donyboy73 8 лет назад

+Drew Thornton a drum sprocket is all one piece, a rim sprocket goes onto the drum as a separate part

@jeffy0807 8 лет назад

+Drew Thornton It's technically not drum and rim, it's rim and spur. With a spur sprocket, the clutch drum and drive sprocket are one unit whereas the rim sprocket is separate to the clutch drum.

@2takterfreund617 8 лет назад

nice saw

@Wythegoodsense 8 лет назад

13% sales tax. WoW Is that for all purchases? Oh nice review.

@donyboy73 8 лет назад

+Wythegoodsense yes except food

@the_burchfield1655 8 лет назад

I hate easy start saws,trimmers,blowers you name it... I really hate relationship building them

@dgsports69 8 лет назад

I continue hearing a chainsaw should be broken in. Can you show how to break in a new saw please.

@andrewford80 7 лет назад

dgsports69 under load. Just run it hard to bed in the rings and seals

@J_AdoreHUNT 7 лет назад

agac motorunda marka stihl dir. bizim cocuklugumuz bunun icinde gecti.cin mali urunlerden uzak durmalarini tavsiye ederim vatandasimiza ,

@WeSRT4 5 лет назад

Buy once, cry once. Buy Stihl or Echo and get quality.

@kyleschuh9985 8 лет назад

I work at a small engine shop and had one of these Saws come in for a simple tune up. the odd thing is it only turned up with 105 psi of compression. took the muffler off, no scratches. took the carb off, no scratches. the guys and I were confused. we called dealers and shops and couldn't figure it out. it also ran like a top. does anyone out there know the answer this mystery?

@donyboy73 8 лет назад

+Kyle Schuh (techumsehsucks77) did you try another compression tester?

@cutchopweld5717 6 лет назад

I had one of these and it was a gutless underpowered pig. On the advise of a friend I bought a Echo CS-590 for $550 can. I sold the 291 the next week. (IMHO)The 590 will outcut anything in the farm/ranch class. No more clamshell crap for me. Sorry Stihl. Get your S#!t together! Your non-pro saws SUCK!

@LivingFaith2 7 лет назад

I bought a 291 before looking it over well, so I overlooked its STUPID top cover design, which requires removing three or FOUR SCREWS to get to the air filter! UGGH! Other than that, and the fact it has no decompression button, it's ok. I have 3 250s.

@HankTheTank23 8 лет назад

13%? That's insane! I thought 6% was high!

@ice25781 7 лет назад

How about 24%???

@rigobertodimas6508 8 лет назад

Donny boy 73 I did not mean to disrespect you on this 291 video we have used 291 compared it to the 290 my290 8291 has no balls whatsoever what I mean by that it has no power compared to the 290 we cut the same diameter tree and the 291 was struggling my 290 is gently used but the 291 is new I cannot believe Stihl actually released to the public I mean what the hell were they thinking I think stihl just need to up their game if you're going to make a chainsaw like to 291 make sure it has more features and more power than the 290 in my opinion that's how it should be done!!!!

@CowboyAxe 7 лет назад

You do understand a new chainsaw will not reach peak performance until the engine is broke in. I know plenty of guys that love the ms291 and have no complaints cutting many hours with it.

@CowboyAxe 6 лет назад

He did say the chainsaw was not broken in yet. I have an ms291 and it will cut circles around the vibrating heavy old cow an ms290 I owned before, it was torture to use it.

@jeffy0807 8 лет назад

56cc and 20" bar? Jeez i use an 044 which is 70.7cc on a 20" bar but weighs a lot more than 7kg.

@rooster3285 8 лет назад

That's because your 044 is a real saw, not this tupper ware junk :)

@TheWoodsmanMilling 4 года назад

Ever ran a 25 on a 91cc saw?

@johnny22single99 8 лет назад

Knock on wood!!!!------> i Really Enjoy my Husqvarna 455 farm tough rancher.... It's a Beast!. It's never bogged down while cutting. And always starts and idel's perfect all the time. But i do run nothing but premium and premium mix oil as well. The spark plug has also never carboned up at all. I have owned it for 3 plus years.... I do enjoy Stihl as well. They are all very fine Product's. Just half to keep proper maintanance on them and the will last for years!.

@PatrickWagz 8 лет назад

Tool-less chain adjuster? Come on, Stihl.

@leafer655 8 лет назад

Here in Nova Scotia tax rate is 15%

@donyboy73 8 лет назад

+jer prime I didn't know that

@geojor 8 лет назад

interesting, I have a 290...

@J_AdoreHUNT 7 лет назад

yerli sandigimiz urunlerde cinde yapiliyor

@J_AdoreHUNT 7 лет назад

emisyon sistemi yakit pompasi yag pompasi ve bircok ozelikler sayabiliriz cin urunlerinde bunlari bulamazsiniz

@williams6550 8 лет назад

13% tax?! Holy cow!

@clubdetennisdolbeau-mistas5971 5 лет назад

Yessir! HOLY COW!!!!!!

@naccibobacci 6 лет назад

I hate plastic saws, nothing sexy about that. Couldn't even give you a metal loop handle. Pinch that bar in the winter and start pulling on that and I guarantee you break that handle.

@alexmatthews2332 8 лет назад

Chain looks pretty dull!

@edwardfinn4141 4 года назад

Alex Matthews you are right,,, These buggers cut fast.

@GeraldThomasphotojunkie 8 лет назад

13% taxes!! Whoa mama!!

@donyboy73 8 лет назад

+Gerald Thomas yes lol

@donyboy73 8 лет назад

+Chris Dionisio I prefer the high taxes, also we have less population

@djsnowman06 6 лет назад

15 here in NL. It is a bit ridiculous I must say

@zeljkobrekalo939 6 лет назад

haha,thats ok..im from Croatia, we have 25%

@CVP-og9pw 6 лет назад

Lol 22% here in italy

@josefontanez6821 8 лет назад

BOBCAT cat

@Bamse52 6 лет назад

Stay away from Stihl 261. My Stihl 261 broke down after only 3 years of cutting firewood. Stihl said it was my fault because I didnt use the Stihl oil and alcylat gasoline! 026 was a much more robust saw and I had one for allmost 20 years and used shell oil and 95 gas mixed 2%. Not happy with the Stihl 261 and Stihl support.

@donyboy73 6 лет назад

was it your top end that was blown?

@SeriousSchitt 8 месяцев назад

😮

@texasforever5776 7 лет назад

It's made in USA not Germany.

@andrewford80 7 лет назад

jar men nope

@texasforever5776 7 лет назад

Yep, I own one and according to stihl.com some of their professional saws are me in germany.

@andrewford80 7 лет назад

jar men they also make 291 in Germany mate. Not every single one is made in the same factory

@texasforever5776 7 лет назад

Yes andrew, I have the catalog right here, say bulit in the usa, I own several sthils. I believe like 90% of what sthil bulids is here in the states

@andrewford80 7 лет назад

jar men probably for the American market. But there are a few other countries outside of the United States of arrogance which get their saws from Germany. Or Brazil. I've never seen a USA built saw in Australia or new Zealand.