Stm32 Soldering Station custom firmware 

Yes, exactly the same, in fact mine was a 072, I replaced the stm32 with the 103. It uses active detection pulses as a workaround, but might not always work perfect. In that case, the detection fix is preferable. For further questions please use the forum 👍

Please ask such questions at eevBlog forum

Upload a 128x64 image here: www.online-utility.org/image/convert/to/XBM Download the xbm file, open it as text and replace the array contents in "Drivers/graphics/gui/screens/boot_screen.c" Take care of the first two values in the array (128,64), they're the width and height, must be specified manually, it's not included in the xbm array conversion. Just check the original boot_screen.c file, it's very easy.

Got it , Thank you..

Nt115 should work if correctly wired, calibrated and power limited. You don't need more profiles, any will do after changing the calibration. No idea how the tweezers are wired...

@@dabyd64 thanks for fast answer!

@@Grucha1998 znalazłem Cię xd i jak postępy ?

Hi, check the pictures in the BOARDS folder or post them in eevBlog. I think the 952 uses a STC controller, this fw is for stm32 only.

Hi, that model is very new, there're no schematics or board pictures, also using LCD will require heavy firmware modification. There's no support for it, at least for now, I'm not planning buying a 959 either. The T12-958 seems to be the same as a KSGER v3, while the T12-955 is a KSGER V2. Regards.

It seems the T12-959 doesn't use STM32 after all, even if some mention this, but STC15W408AS. So no support.

@@dabyd64 thanks for your fast response, I’ll go for 958 with stm32 then

@@dabyd64 I have replaced some weird factory cpu for stm32 and installed the firmware for ksger 3.x on t12-958. It seems to work, so it’s not “untested” anymore 😁

@@wiktorsz1967 Nice!

I already have a 858D hot air station which work nicely for me, so the answer is no, developing for something you don't have is a nightmare.

@@dabyd64 today I flashed your firmware to my KSGER station (v3 board) and I’m happy with it! Thank you for this great work! First time I use it a few months ago and just did not understand all the features, so decided to restore factory firmware. But today I was ready and I impressed with all these new features! Feel like I bought completely different soldering station. Calibration never was so simple, and my soldering iron become much more efficient, comfortable. Feels like it got twice more power and speed. Great work! Hope you will update it))) Thank you one more time!

Now I plan to buy another (but similar) controller board to flash you firmware and use it with my JBC C245 clone.

@@DimAsWizard Great :) I dedicated a lot of time, specially fighting Ksger issues... Since the firmware finally became stable, I only fix bugs and issues, I don't plan doing any huge rewamping anytime soon.

T12x - stc

Please, use the forum, expose your issues with detail, including board pictures. Not here! Try the latest builds, there was a memory issue in the recent days causing crashing in 101/102 devices. I don't know any Ksger board 2.0 that uses spi display like 3.0. So go and post the details!

@@dabyd64 Ok. But I still don't understand why the HW2.00 board version is in the 3.x folder? github.com/deividAlfa/stm32_soldering_iron_controller/tree/master/BOARDS/KSGER/%5Bv3.x%5D/Schematic github.com/deividAlfa/stm32_soldering_iron_controller/blob/master/BOARDS/KSGER/%5Bv3.x%5D/Schematic/STM32_T12_oled_v3.0.jpg I have just such a board.

@@Angelo0chek please use the forum

Please open a ticket in GitHub for those questions. Anyways, you want the border to be square, right? FILE Drivers/graphics/gui/widgets.c FUNCTION widgetDefaultsInit MODIFY w->radius=-1; (Auto) To w->radius=0; (zero radius, square)

@@dabyd64 sure i will open ticket. Thanks 👍