Stock Air Filter or Cold Air Intake Kit for Power Gains? Let's Find Out! Fiat Punto 

Great video as always. I wonder how the stock airbox would perform without the restrictive intake? You could try to cut off the pipe right after the restriction to see if that makes any difference. As a follow-up, you could also attach the cold air intake piping to the modified airbox. This would give you two more data points for your experiment. :)

I have tried it without that flexi pipe, it was even worse because the intake air temperature was higher. But yes it should work much better with properly placed and sized inlet 😊

That's Ecumaster Road Dyno. All Ecumaster ecus have that, even my piggyback. It needs rpm, speed etc and it makes the graph based on those numbers

@@JoniK1 can not find anything about that..

Those are legal to use in here but engine breather hose must be connected to air filter piping or directly to intake manifold. It's very unlikely to get any water where the air filter is, at least if the pothole is under 20cm deep 😃

@@JoniK1 Italy's laws for cars are dumb, you cannot touch or modify anything basically.. Okay, nice to know, as always thank you man, stay safe :D

Cone filters are also illegal in Australia, at least for "modern" cars, I believe with classics anything goes as they're not driven so often. Cone filters are illegal due to if the car has a hiccup of sorts and spits fuel back out the intake, apparently a cone filter is much more of a fire hazard than the standard boxed filter, though this law is easy to bypass, I've heard people pass inspections by putting the filter inside literally a tupperware box with a hole in it.

@@UniCrafter here the problem isnt about inspections, not in many cases, it's more about what kind of police officer you meet Some officer understand that you are only making the engine more efficent but other only watch the actual Law and they punish you with a Ticket and if i remember correctly, here they can take away your Car's paper.

@@coraz98 similar thing here, but if a car can pass inspection there's nothing a police officer can do, so generally people modify their cars to pass inspection. Police CAN fine you for technically legal mods, but you can easily dispute them.

We will soon see 😃

Thanks! Yes, spray adhesive 😊

@@JoniK1 thanks :)

There's part list in comments section on my another video

Silicone 135 Degree Elbow Hose 60mm: rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575563443&toolid=10001&campid=5338643528&customid=jonik&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FNew-Red-For-ID-60mm-135-degree-Elbow-Silicone-Tubro-Intercooler-Coupler-Hose%2F184029023040 Aluminium Pipe 300mm 60mm: rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575563443&toolid=10001&campid=5338643528&customid=jonik&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F60mm-2-36-inch-Aluminum-Intercooler-Intake-Turbo-Pipe-Piping-Tube-hose-L-300mm%2F332349412284 Silicone 45 Degree Elbow Hose 60mm: rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575563443&toolid=10001&campid=5338643528&customid=jonik&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F45-Degree-Silicone-Elbow-Hose-Silicone-Pipe-Bend-Coolant-Radiator-Air-Water%2F253302385202 Aluminium Pipe 76mm 60mm: rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575563443&toolid=10001&campid=5338643528&customid=jonik&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F60mm-2-3-8-COUPLER-Turbo-ALUMINUM-PIPE-JOINER-HOSE-CONNECTOR-POLISHED-L-76MM%2F281823473922 Performance Air Filter 60mm: rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F2-36-Car-Performance-Air-Filter-60mm-Air-Intake-High-Flow-Cone-Cold-RED%2F313112887317&campid=5338643528&toolid=10001&customid=jonik 4x Hose Clamp (min diameter 68mm): rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575563443&toolid=10001&campid=5338643528&customid=jonik&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F4x-301-Stainless-Steel-T-Bolt-Clamps-67MM-75MM-For-Hose-2-5-8-to-2-15-16%2F293221028309 Breather hose filter 1": rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575563443&toolid=10001&campid=5338643528&customid=jonik&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FUNIVERSAL-1-INCH-25MM-HIGH-FLOW-COLDS-AIR-SHORTS-RAM-INTAKE-FILTER-CONE%2F312744171057

I have Punto 75 camshaft and intake manifold, 46mm throttle body from Bravo 1.6 (10mm bigger), bigger fuel injectors and Walbro 255lph fuel pump, 4-2-1 performance exhaust manifold and Ecumaster DET3+ for tuning

That’s a lot of mods for only 25 HP…

I think it was the same parameters with other intake 😊👍 with this setup is 2hp a good Performance only turbo makes more Performance with the same stuff

No tuning, I just changed it 😊

It doesn't make a difference to intake air temperature when driving, only when idling for a longer period of time. The air goes through the intake piping so fast it doesn't have the time to heat up