STOP ! Never Use UV Resin As A Sealer For Key Chains/Rings ! Watch And I Will Show You Why !!!!!

Подписаться 2,2 тыс.

Просмотров 12 тыс.

50% 1

#resin #uvresin #sealer #keychain #keyrings #information #diy
Hi Guys
This is a short video to help and explain a few things as I came across ALOT of videos recommending people use UV resin and Epoxy to seal there beautiful key chains / Rings ! This is a big mistake xx If you know you know but if you don't watch this video and I'll show you why this could go horribly wrong. If like me your looking for a beautiful sealer then in my next video I will be testing many sealers and top coats to see of we can find that perfect alternative xx
Video link to top coat testing alternatives to use instead
• Testing Top Coats / Se...
My Etsy Store Coobylcious.etsy.com
******************************************************************************
Disclaimer ; The video's I create are not designed for children, In my arts and crafts I use knives, hot glue, resin and chemical dips to produce my pieces, as well as a range of other craft mediums. None of the crafts I create or the processes I use should be attempted by children. Therefore viewer discretion is advised, for younger audiences I recommend watching the RU-vid Kids App. Many thanks for taking the time to read this xx
******************************************************************************

Хобби

Опубликовано:

4 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@Yoyocreative Год назад

I've used uv resin to dome shrink plastic key rings. I know they have a bit more grip than smooth acrylic charms, but I had the same problem of the dome coming off. What I ended up doing is adding a layer of mod podge on the charm (letting it fully dry of course!) before doming with uv resin and I never had the problem of the dome coming off again! I'm not sure if this works on smooth acrylic, but I think it's definitely worth a try!

@coobyliciouscrafts Год назад

Hi hun xxx Thank you for watching xx Yes I’ve done a video using this exact method with shrink plastic and I’m just in the process of doing the top coat testing video xx And like you I did think of trying this method and may do still but the modge podge hasn’t given a pure clear finish on the acrylic so I’m not sure it would give us that glass like finish we’re after but good point and it might be worth testing anyway 💖🤗 xx

@anr_pro 6 месяцев назад

Thank you guys for your info, Roy helpful 🙏😭🔥

@lovetocreate8416 Год назад

Omg 😱 I did not know this ! I cannot believe how easy that popped off. Thank you so much this is really valuable information, I bet like me others had no idea. It looks so nice and clear you would have no idea that they were not adhered at all well. Really looking forward to your topcoat video, hoping you manage to find a good one.

@coobyliciouscrafts Год назад

Thank you so much xxx I’m so surprised to be honest that so many people tell you to seal your pieces with UV resin not actually testing if it really sticks or not ? It’s looks like it works so people don’t think to question it xx I’m afraid I question everything lol x I felt I had to make this video not to cause trouble but to warn people so they didn’t make these mistakes x Sharing info is the right thing to do 💖🥰 xx

@carolstewart1704 Год назад

@@coobyliciouscraftsexactly!! I knew better too and cannot fathom why others are showing doming or sealing these with uv resin like it actually works! 🤦

@kathyallison4843 21 час назад

I am new to this type of crafting and planning to make some keychains. I have watched a number of videos on the resin application and make it part of my plan until watching your video. Makes perfect sense when you think about it. My question is this, "if you sand the edges and coat both sides, will the resin fill in the sand grooves, providing extra grip while disappearing from view and will the resin adhere to itself from both sides giving a more secure seal?" I also watched your test video so I plan to test my resin theory and also compare it to the Dura Clear that took 1st place in your test. Like you, I want to use what will last.I really like the 3D effect that the resin gives so would love to find a way to make it work.

@coobyliciouscrafts 19 часов назад

Welcome 🤗 x Sanding will definitely improve the surface grip and help with adhesion x A lot of people use this method and are happy with the results I cannot vouch for the consistency of results as it’s not something I use regularly so you’d need to test and test again x My reservation with this is some of my designs go close to the edge so sanding space is limited and I have weak hands so I I’d like to find an alternative that didn’t need sanding xx In theory if you get good adhesion on both sides and they have a good bond to each other you are right this has the potential to work very well x I would do some tests first but your definitely on to the right path xxx I really hope it works for you 🤗💖 xx

@DenisePoole-Closet-Crafts Год назад

I watch a man in the UK who has been doing resin for years. He did say they can pop off sometimes if you do not prepare them right. He did a close up and you can not see marks from the sanding. Your video makes a good point, one i have wondered about as it looks like it has nothing to cling to. If you paint and the surface is smooth, you sand it first. I would have though its the same for resin?. Your point is a valid one I have heard twice now thank you. Having said that, i will try with the sanding method as they only for me and i can shout at myself lol. hopefully mine will work like the man said with sanding..

@coobyliciouscrafts Год назад

Thank you very much for your kind comments and for your additional information, this is something I will definitely look further into as I really think it’s worth trying these things to see if there is a secure way of doing it xx I hope you have some success with yours 🤗💖 xxx

@theglitterbombmom 5 месяцев назад

I’ve only had it pop off once, but the keychain was pretty old. Thank you for the video though. It’s truly important to test

@coobyliciouscrafts 5 месяцев назад

💖 xx Thank you ☺️ xx

@lozbob3824 Год назад

Wow !! That had no chance of staying on there at all. I have always wondered this, I have watched people dome things with resin in videos and thought but people make moulds out of this stuff why are you now using it as a sealer ? Great video as always brilliant information and very helpful thank you.

@coobyliciouscrafts Год назад

Thank you so much ☺️ xx It’s a shame people just don’t realise and make so many things in this way thinking it will protect there pieces when it actually has the potential to just fall right off ruining there hard work xx

@karihilderbrand5441 Год назад

If you lightly sand the acrylic blank before planting design and UVresin it does not pop off. I find that even quality uv resin yellows faster than 2 part epoxy

@coobyliciouscrafts Год назад

Yes Iv tried sanding now and I totally agree with you it makes a huge difference but it’s quite a difficult task with my hands if I can find an alternative I think I’d prefer that right now xx Thank you for your advice x Yes I agree 2 part epoxy does have better uv properties than uv resin xx Im searching for a Top Coat that has better grip and uv qualities which will give me a good all round performance xx 💖 xx

@TheLadybugJr 4 месяца назад

Recommend sanding a smooth surface for better adhesion of uv or 2 part resin (and bling projects) ALWAYS. Great info!TFS❤

@appleoneill5135 Год назад

Great tutorial, thank you x

@coobyliciouscrafts Год назад

You are so very welcome xxx

@MileyonDisney Год назад

Thanks for the helpful info! I don't care much for UV resin, anyway. Take care.

@coobyliciouscrafts Год назад

Thank you 😊 xx

@shawnjonesharris2059 9 месяцев назад

Informative, but I would liked to know what was a better alternative.

@coobyliciouscrafts 9 месяцев назад

Hi there thank you xx There is a link here for you on a video I did on testing top coats exactly for this purpose to find an alternative xx I am always actively looking for good quality products to use as alternatives and will update everyone if I find anything better xx Hope this information helps 🤗💖 xxx ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_kFaqF9UdWc.htmlsi=axepAjUXoABJlYUA

@eyecu382 5 месяцев назад

Thank you so much for this, I AM researching at the moment so I can sell my products confidently knowing they are the best I can make. Also researching alcohol inks. xx If I make my keyrings from resin itself, would the UV resin top coat then adhere better? x

@coobyliciouscrafts 5 месяцев назад

You are so very welcome 💖🤗 xx I’ve done various testing videos on top coats and even alcohol inks if there of any use to you, i might have used a brand you have seen you would like to see how they perform xx I always go back to Piñata alcohol inks in the end as I like how they perform but there are many out there x If I find anymore products along the way I will be sure to keep everyone updated 🥰 xx I wish you all the best 💖🤗 xxx

@chanalowenthal3897 Год назад

Thank you. I’ve heard that resin doesn’t stick to acrylic and it makes sense but I keep seeing videos that dome with it. Can you seal the decoration with clear coat?

@coobyliciouscrafts Год назад

Yes I have been doing tests and so far so good x I have done another video testing top coats if your interested and a couple came out on top x I have been doing some testing since and so far clear pour top coat and One called DuraClear Gloss I have really found work well x They seal in decorations and give a nice shiny finish xx Hope this helps xx

@ginagray8442 10 месяцев назад

wow you can make your own blanks this way....yay

@coobyliciouscrafts 10 месяцев назад

💖😍 Yes you can xxxx

@ownsacat 11 месяцев назад

I heard a youtuber say that when you dome epoxy with UV resin it comes off like that too. I tried it and sure enough, it did for me. . You should test that too. I don't know if it was the brands I was using or what. I'm not fond of UV resin.

@coobyliciouscrafts 11 месяцев назад

Ah interesting thank you x Yes I will give that a try x I know Epoxy will come off plastic as I make plexiglass moulds for Epoxy resins but I haven’t thought of the cross over between Epoxy and UV Resin x Definitely worth an experiment thank you 💖🤗 xx

@user-yb8qy2be4v 6 месяцев назад

i was about to order some resin too😮

@coobyliciouscrafts 6 месяцев назад

Uv Resin is great but in my opinion not quite great for this job xx 💖 xx 🤗 xx

@janieness5158 Год назад

What do you suggest to use instead of uv resin on acrylic blanks?

@coobyliciouscrafts Год назад

I’m testing top coats to see which comes out the best alternative x I have a top coat video up already if your interested xx And I’m still testing as I go along to find the perfect one and will keep updating everyone as I go xx 💖💖 xx I always try and share the information I find that I think will help others xxx

@Kat-nc3bs 8 месяцев назад

I have never had uv resin pop off, NEVER. Use it on ornaments all the time.

@coobyliciouscrafts 8 месяцев назад

I’m pleased you’ve had a positive experience xxx

@kaybryant7987 7 месяцев назад

Thank you. I was fixing to make key rings with uv. Epoxy it is

@coobyliciouscrafts 7 месяцев назад

Your very welcome 🤗 xxx I haven’t tested epoxy in the same way as yet I would do a test incase it acts the same as they have many of the same properties in other ways xx Try a tester and see if you can pop it off x I’m doing some tests at the moment for another video but I’ve been very busy with Xmas to see if we can help the process to ensure a better adhesion with many topcoats resins included without all the airborne particles of sanding xx Il do my best and help more as soon as I can 💖 xxx

@elaineres1 5 месяцев назад

I'm fairly new using resin and was alarmed watching your video. I'd appreciate it if you would answer my question....when making a shaker key chain you use clear acrylic to cover and seal the shaker bits. What do you advise to be sure the acrylic cover won't come off? If you then put a top coat over the entire surface will that ensure the cover will stay put? Thank you so much for your help

@elaineres1 5 месяцев назад

Does it matter if you use UV or epoxy resin

@coobyliciouscrafts 5 месяцев назад

Hi thank you for watching 🤗💖 you are right to question after watching this xx I have many videos where I have made shaker charms and the theory is that normally a shaker is made out of resin perhaps with a mould and the shaker has a thick diameter rim so the shaker film lid wants to sit nicely in the middle of the rim ( not big enough to reach all the way to the edge but enough to cover nicely the hole ) so that when the resin is domed over the top it totally encapsulates the whole piece and connects to itself on all sides becoming one piece of resin and therefore no longer being able to separate itself and the clear acrylic is just inside doing its thing 🥰 xxx Does that make sense x I’ve made some odd ones that push the boundaries but they are more for show and not practical so don’t conform lol but this is the rules I stick to to make all my shaker charms that I want to use 💖🤗xx I hope this helped xxx

@coobyliciouscrafts 5 месяцев назад

I haven’t tried Epoxy to cover my keyrings but Epoxy will normally have the same outcome as I use acrylic sheets to make moulds for Epoxy and it comes off just as easily I’m afraid xxxx Some say sanding works but this isn’t always possible and I’ve had projects ruined by trying this method x I have videos where I am looking for resin top coat alternatives not found the perfect solution yet but when I do I will certainly publish that video fast lol xxx 💖 xx

@elaineres1 5 месяцев назад

Thank you for your help. Yes,, it makes perfect sense. I have some acrylic keychain disc that were included with the hardware and I'm so happy to learn the resin will come off before I spend a lot of time making something that is useless. Thanks again for your help. Great video and really valuable

@coobyliciouscrafts 5 месяцев назад

Your very welcome xx I try to share what I have learnt to help others as best I can 💖 xx I do lots of testing videos so we can see together how different products compare and react and to save people money in trying them all themselves x I’m hoping one day il find that perfect top coat 😍 xx

@AmouraKKosmetics 24 дня назад

Sand the sides and it won’t do this.

@rhandadormeus6818 8 месяцев назад

Ok, whats the solution

@coobyliciouscrafts 8 месяцев назад

I have a couple of videos where I am testing top coats to see if we can find an alternative xx Also at the moment I’m working on some tests to see if we can find a solution to help the Resin stick better x Hope this helps xxx 💖 xx

@tracydonaldson1290 4 месяца назад

It’s because you need to key the surface by sanding. Once you lightly sand, then put the uv resin on it will grip to it ❤

@amybarber347 2 месяца назад

Oh yeah add just a hair of blue not even enough to see in it so the the uv does not yellow

@amybarber347 2 месяца назад

Sand people sand. Also, brush around the edge real quick to seal it in and put a layer there. And only putting one layer like that is cheating

@sponsoredbylife3913 3 месяца назад

Lots of talking.. no suggestions of what better options to use. 😊

@coobyliciouscrafts 3 месяца назад

I have a whole video on testing top coats and looking for alternatives if you’re interested. The whole purpose of this video was just to show you what could happen sorry this video wasn’t to your liking 💖 xx