Strangest Thing I've Found In a Slab

Подписаться 2,7 млн

Просмотров 2,2 млн

50% 1

How to make a modern solid wood and epoxy desk.I just finished this walnut and resin desk I made for my father in law. A lot of times you guys want to know how much I made from a project, so the answer is nothing this time! Materials would cost around $1000 for a similar one though if you want to try one yourself.
Need one on one help? I offer a few consultations a week. Details below.
30 minute video consultation: www.blacktailstudio.com/shop/...
Related blogs and videos:
How to make an epoxy table blog/video:
www.blacktailstudio.com/blog/...
Get a finish like this: • How to Finish a Table ...
How to attach table legs: www.blacktailstudio.com/blog/...
How to make an epoxy form: www.blacktailstudio.com/blog/...
How to calculate epoxy: www.blacktailstudio.com/blog/...
Photography tutorial: • How I Shoot My Product...
Items used in this build:
Table Legs: flowyline-official.myshopify....
Liquid Glass Epoxy: amzn.to/2YJdchb
Track saw: amzn.to/2CbWEXq
Angle grinder: amzn.to/30StKWP
Wire wheel for angle grinder: amzn.to/2UV4ZFr
Restorer: amzn.to/3lcK2Bn
Tyvek tape: amzn.to/2P4r80D
Mold release: amzn.to/2P5zVjd
Transtint black: amzn.to/2zL4Ih8
Paddle mixer: amzn.to/3hzLdZU
Respirator: amzn.to/2UVhAIP
Propane torch: amzn.to/3fwnisz
Art brush: amzn.to/2BfuN8k
Black CA glue: amzn.to/3hDyW6U
CA glue activator: amzn.to/3e7qoTv
Clear CA glue: amzn.to/3eddtPY
Metal chop saw: amzn.to/3hFmyDa
Festool router: amzn.to/3frNRPA
Threaded inserts: amzn.to/2AMDIOz
1/2" Spiral router bit: amzn.to/37CQjjm
1/4" router bit: amzn.to/30YBYg9
Festool Rotex: amzn.to/3hDzERC
Festool finish sander: amzn.to/2CiDXl3
Bahco scraper: amzn.to/3ecX6Tz
Track clamps: amzn.to/3hE6cuE
Gem sander/buffer w/shroud: amzn.to/2XazhoK
Gem sander/buffer w/o shroud: amzn.to/2D2sGG5
Rubio monocoat finish: amzn.to/2BEzF7t
Sandpaper storage: amzn.to/2ELsewC
Festool track square: tsoproducts.com/
Light Wand: amzn.to/33BSwKi
Photography light pair: amzn.to/3lQxpfN
blacktailstudio.com/
/ blacktailstudio
/ blacktailstudio

Хобби

Опубликовано:

16 сен 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3 тыс.

@1955joed 2 года назад

As a cabinet guy, I think I would probably have built a box just around the drawer to mount the drawer slides in. That would effectively hide them and not be as distracting as just the slides themselves. Just a suggestion if you should run into problems like this again. Your work is beautiful though and I enjoy the videos. I am doing a kitchen remodel in our house and I will be using our local wood (mesquite) for a bar top. I have found inspiration from you videos. Thanks again.

@wademelton3817 2 года назад

prefect solution

@AcessDBpro 2 года назад

The only drawback would be that the cubic measurements would be much greater for the same volume of existing drawer space, not to mention the extra wood, much of it not exposed to show its artistic beauty. But the push-release mechanism would be possible with your solution, and if Cam's father-in-law is good on the idea, then it would be a viable solution. (As a cabinet guy, why don't you create a solution that can be marketed for wood artists like Cam? Lotsa dough potential :) )

@tazzzidevil 2 года назад

You took the words out of my mouth...

@jamesglavich1426 2 года назад

A beautiful table indeed. i would consider painting the drawer slides to match the legs. We all know the legs are there, same with the slides, we know something makes it slide in and out. Just a thought.

@retiredarchitect3462 2 года назад

Absolutely agree that side-mounted glides on a three-sided screen made from the same materials as the box would make this a much better present for your father-in-law. I suggest you go back and retrofit it !

@gayleandrus7050 2 года назад

I am an older woman who never has made anything out of wood but I am so fascinated by the exquisite things you build out of trees. You have vision and imagination and skills that go beyond what "normal" people do. Your pieces are just beautiful. My dream is only to whittle out a long (12 inch) wooden spoon like my grandfather used for stirring his soups in the big pot. 😀

@BlacktailStudio 2 года назад

You should Gayle!

@omzaharagreene-ellis5015 2 года назад

I had a stroke a few years back… Listening to you it’s so comforting thank you.

@johnbuckley4444 2 года назад

When I used to build large commercial buildings we always made a big deal of making sure the wood doors were painted on all sides, including top and bottom. The reason was to avoid warping caused by differential absorption of moisture. I think you are right on sealing top, bottom and sides.

@giacomochizzola1266 Год назад

Sounds wise! I actually have a question regarding this. My previous flatmate had a nice big thick heavy slab of glue laminated wood (?? I think this is correct, English is my second language). Nothing fancy, but hey we are students. He used it as a desk and since he isn't particularly bright (just kidding, he simply didn't care) he "treated" the only top surface to protect it with crappy white paint, probably for walls. Of course, the slab warped, especially after I removed it from his room after years when we left the house. I was thinking of using this wood for a few projects if I can get it to straighten out enough (again, I'm a student, so budget is key plus re-using is nice :) ). Do you think that if I sand it down and allow the wood to breathe from that side as well it will be able to absorb moisture and compensate, or is it doomed now? Thanks!

@johnbuckley4444 Год назад

@@giacomochizzola1266 That's a bit beyond my knowledge level, but I would NOT think it will settle on its own. However, you might be able to locate a local woodshop that will plane it down for you.

@rieksstevens Год назад

@@giacomochizzola1266 yes it will straighten out again ,.. the warping is because the paint will shrink and thus will warp the wood ,.. that's why laminated wood always comes with a backing to counter that .

@l.rod2827 2 года назад

Great looking table as always. I agree with you the drawer slides wasn't the best, but one possible solution to conceal would be to paint them flat black matching the legs.

@dancnkc 2 года назад

I would have finished two 3x1x16 (approx) blocks. Mounted those under the table and then mount the drawer tracks to the wood blocks. Those L brackets are definitely a bit garish. Painting them black would help as well though.

@kalanhitchens8782 2 года назад

Or just box the entire drawer in.

@chuckiannuzzi6839 Год назад

Live edge end tables with dovetail drawers. I am a retired wood worker who vicariously relives making sawdust by enjoying your video's

@garyroylance3171 2 года назад

I'm simply amazed at how you went about making this desk. What an amazing piece of furniture. I'm more of a wood turning but this was just beautiful to watch!!

@louiswarmoth7354 2 года назад

Beautiful desk from a magnificent walnut burl slab. Enjoyed watching you building and finishing it. I’m a retired cabinet builder and have a keen appreciation for others fine work. Yours is very, very nice but if you’ll allow me to state an opinion…mechanical drawer runners are great. I installed hundreds of sets over the years, from early KV’s, to epoxy coated Europeans, to all sorts of more recent iterations in the ball bearing category. Any runner that has plastic parts is an invitation to failure. Soft close, self close be damned, they just don’t hold up in the long run. It’s a shame that we’ve become so lazy that we can’t push a drawer closed…as has been traditional since drawers were invented, until pushing a self-closing risks breaking those accursed plastic parts. There’s nothing that works better than a set of full extension, with one inch over travel, Accurides. Pretty simple to install and simple to operate and if you happen, under dire circumstances, to get a failure call…simple and inexpensive to replace. Now I’ll step down off my soapbox. Again, enjoyed the video, keep up the beautiful work !

@TheCaveman05-13 2 года назад

I love how thankful you are and how much you appreciate the little things! That’s why I watch your channel above a lot of others! It’s really nice to have a personal touch and a sense of connection!

@timothystephenson3915 3 года назад

Cam, I've learned so much from watching your videos!! I'm a disabled veteran and you've inspired me to start making epoxy tables in my workshop. Thank you for being so generous with your knowledge and unafraid of sharing your lessons learned (both good and bad). You do amazing work and I love your videos!!!

@BlacktailStudio 3 года назад

Thanks Tim!

@teamofstars 2 года назад

Brother Timothy... thank you so much for your military service... i hope and pray that Cam's inspiration and great teaching helps you to become the best you can be at table making and everything else you choose to do in your blessed life...

@2009carol2010 2 года назад

God bless you for serving our wonderful country. ❤️🇺🇸

@pnwadventurer9674 2 года назад

I’m a disabled vet too and I’m very interested in this hobby

@exposingthedarknesswiththe9190 2 года назад

*SIMPLY BEAUTIFUL...KEEP 'EM COMING!!* *I LIKE THE IDEA OF A RIVER GOING THROUGH THE DESK OPPOSED TO THE BLACK...JUST SAYING, NICE JOB!!*

@robinhardersen6590 Год назад

More please! This table is absolutely gorgeous! The fact that the natural wood still shines along with the epoxy, fabulous.

@casperscuts2627 2 года назад

I still get a kick out of watching your project come to life! I loved how the drawer front matched up with the desk top, great job.

@English_Lessons_Pre-Int_Interm 2 года назад

14:05 for those who started searching

@eoinhourihane7586 3 года назад

Quick tip about using the CA glue: The activator will (almost) instantly cure the top but if what you are glueing is on the deeper side it may take a little bit longer. A way to get around this is simply wait longer or to spray the area you are glueing with the activator before and after you add the CA glue. Love the videos, keep up the good work!!!!

@BlacktailStudio 3 года назад

Good call!

@jacobyeske4054 Год назад

I would love to see you build an entire custom bar. I stumbled upon your channel a little over a week ago, and I am hooked. I haven't been able to cut one video short, always watch to the end, and really appreciate your honesty when it comes to products and mistakes. I think that your work is incredible, and am definitely looking forward to your future projects. Thanks for bringing us into your shop, and sharing your opinions, and craft.

@surveyordave 2 года назад

when the finish finally goes on....makes my day!!!

@jfox8531 3 года назад

Cam, I was so thrilled you left the bullets! And those LEGS! 😍 Also, you have a knack for responding to the jealous/trolls/haters that is quite refreshing. Good vibes from the WA coast.

@ellenl.5581 2 года назад

The legs are a work of art in themselves. Very powerful visual. The desk was beautiful drawer and all. Your father-in-law will feel very special and so will your wife. Whatever anyone else says art like the legs and the desk are are mental first and no one else has the right to interfere with your thoughts.

@timcam8713 2 года назад

Wow, that is a stunningly beautiful table/desk, your father-in-law is a lucky guy.

@markhenderson3771 Год назад

I don't have a suggestion for the next project, but I wanted to share that I generally watch all of your videos to the end. That's interesting because I don't watch all videos to the end. There is something about your easygoing approach that compels me. Thanks.

@learieramoutar7590 3 года назад

I have watched alot of your videos and I must say that your work is absolutely amazing. Keep up the great craftsmanship.

@davidcooper9238 3 года назад

Cam, I just wanted to say that I really enjoy your videos and the detail you put in them. Thank you

@BlacktailStudio 3 года назад

Thanks!

@robertm348 3 года назад

I can understand your appreciation of his work, since you are a cooper, busy making barrels and buckets instead of tables, desks and other items...but I guess you could branch out! Pun intended.

@jff1813 2 года назад

OMG, this is to die for! I"d kill for a dining table just like that. Your father-in-law is lucky to get such a gorgeous piece!

@petergilman4400 Год назад

I am not a wood worker nor have I ever built anything at all complicated but I find your videos so informative. You have a wonderful personal style and a terrific design sense.

@ThoenWorks 3 года назад

Now one of my favorite content creators. Enjoy the builds, and almost always learn a little something (or a lot) along the way. Good work.

@BlacktailStudio 3 года назад

Thanks!!

@svenlinden9312 3 года назад

Greetings from Germany here, I just wanted to stop by and thank you for these amazing explanatory videos on wood working. Being a full amateur on this I just recently made a TV side board together with my father and we were watching your videos to see how to apply finish correctly. Much appreciated 🙏🏻 keep up the great work!

@mickwilson127 Год назад

Your work is stunning. One thing that you might consider is that if you have to “sand to heat up the surface” before scraping, then perhaps investing in an infra red panel mounted above the workspace. Not only would it keep the workpiece at whatever temp you set it to, but you’ll make it nice and toasty in the winter.

@jamesrobertson9468 Год назад

That is the best piece wood I have ever seen on your videos. Thank you for your services.

@shadow-wulf 3 года назад

id love to see a scene in the epoxy of a desk or table. Maybe build up a beach with sand and different coloured layers of epoxy.

@maleficentcop2752 3 года назад

Love the desk... I'm sure your father in-law will too...👍 When attaching your drawer bottoms, slide then into place then use a pin nailer to hold them in place, same with raised panel doors. It allows for expansion.... I've used silicone on drawer bottoms but like the nails better... You really do some amazing work, thx for continuing to put these videos out....👍

@BlacktailStudio 3 года назад

Thanks Tim!

@brandontwohawks Год назад

Have watched a number of these videos, love all the work. But this one really catches my eye. Just gorgeous.

@evanhynes6333 Год назад

I know nothing about wood/epoxy working. I’m enjoying the Zen of the work and the artistry of the finished product! I’m also learning a lot about this craft. Perhaps someday I may try something. As of now I’ll just keep watching. I don’t even have access to any of the machinery! LOL…Great work young man! Thanks for the warm welcome!

@chriscardoza6164 2 года назад

Cool desk! Love your work! The exposed drawer glides are a minor issue, loads of options and you used one of them. If I were selling the desk I would've used a different method. A project I'd enjoy seeing you complete would be a coffee table with hidden storage and subtle interior lighting to see what you're looking for. Maybe incorporate a lift top since a lot of people sit at their sofa while on the computer or eating a meal. I'm sure whatever you make next will be interesting to watch and educational for those of us who are learning. Thank you!

@aremedyproject9569 2 года назад

Yes! It bugs me the wasted cubic feet under coffee tables. Wood is so beautiful too, the more the better. I’m a drawer fan myself, not cupboards, for storage.

@northcackalacky4694 2 года назад

That was the most spectacular slab of wood I've probably ever seen. Nice eye on that find!!!

@robertbeermanjr.2158 2 года назад

Magnificent! Such a beautiful and functional design. I enjoyed watching the process. Well Done.

@elberthardy961 2 года назад

I'd love for you to include in your videos the clients' reaction when they first see the finished product. Great work, friend!

@Red_Proton 2 года назад

You make beautiful wood furniture. Thank you for sharing what/how you do. When it comes to desk drawers, you might call this cheating, but I love using 30" tall 3-drawer file cabinets.

@dallasgearsgodpettman1941 2 года назад

You deciding to leave the bullets in was a damn good choice! Epic build

@Xanderbelle Год назад

It makes me smile every time I see your 'Branded' planer😀

@reginamcgowan1208 Год назад

mirror frames or a bench floating shelves, vanity top, room divider screen...OBSESSED with Flowy Line styles!

@ronh9384 2 года назад

Really liked the desk. It looks amazing. I made a desk 2 years ago for my wife when she started working from home. She wanted the open desk concept. I couldn’t get the under mount slides at the time so I used a similar push to open, slow close slides. I dado’ed and routed out the places where the slide rails and brackets on a matching piece of walnut on each side and then drilled holes in the walnut slide cover and the walnut drawer sides to put a faux panel over the rails and using magnets to hide everything. It has worked great so far. Since then I have made another desk and used the under mount slides. I made a faux drawer box shell around the entire drawer and it gave it plenty of support and turned out fine. Also at the 13 minute mark you were using your sawstop to cut through a board... Does your SawStop have a 12” blade? Thanks for your time. RonH

@ashmouse 2 года назад

Love to see a kist/ large storage trunk! Stunning build of the desk, the bullets were a surprise and nice detail. Agree to painting the sliders for more concealment

@robertcampbell3147 2 года назад

Really enjoy your content and the way you make this artistry accessible to complete amateurs like myself. Developing a woodworking skillset that would allow me to build cabinet or furniture-grade pieces in my garage is definitely a bucket-list item.

@adrienneterzen2604 2 года назад

I love watching these masterpieces come to life. Beautiful work!!

@pricem36 2 года назад

Your videos and tips are inspiring. I just made my first epoxy filled desk and used a lot of your tips. Still made mistakes but I know what I did wrong so there's that and can learn from it. Thanks again for your videos! Mike from Fayetteville, AR.

@melindaostergren8115 2 года назад

Good for you, Mike! Knowing what happened and how to fix can be so satisfying.

@daisensei69 2 года назад

Your choice. Beautiful job as usual. As for sealing the slabs, I definitely do. Not sure why BlackTail has a strength issue, epoxy should stick to epoxy. I find as the the epoxy gets hot it will draw the bubbles out of the timber, unfortunately often just before gelling thus sealing in the bubbles. I do however prep the edges like yourself, then scrub the coating on the edges with a stiff brush rather than a roller, otherwise you can cast over air pockets again sealing in bubbles (that you don’t see until you do the main pour). Keep up the good work.

@kerriefearby9542 11 месяцев назад

That desk is not just a desk it a piece of artwork. The way you matched the two pieces of timber - wow! The finished top looks like a google earth screenshot with a river running through. I love it.

@normablake2748 2 года назад

Stunning. The bullets added a real pop to the woods history. This is the first time I’ve watched your channel. I enjoyed your project. Keep doing you.

@eldersonn1 3 года назад

Parabéns amigo pelo trabalho. Sigo aqui do Brasil o seu trabalho.

@geraldinesnyder6271 3 года назад

I love this wood working book t.co/SGIXIPXR0z . A few of the topics talked about in the book include wood working strategies, explanation on the development cycles of trees, and various lumber characteristics that craftsmen favor. I also provided my father another copy.

@morrisdeutsch6175 3 года назад

I would like to see you build a chair to go with this awesome desk, Cam. Great job, as always!

@BlacktailStudio 3 года назад

Thanks Morris!

@user-ed9ql9oe6d 6 месяцев назад

I'm still quite liking the epoxy tables. Mainly as the wood is so beautiful, and each one is different. Thanks!

@kathrynbaker8215 Год назад

I know this is not a new video, but I just saw it was available. WOW, what a gorgeous desk! Thank you!

@chriscarskaddan64 3 года назад

I’d like to see a video showing the reaction of your customers’ faces when they see these magnificent works of art. This might be my favorite yet. I’m primarily a woodturner, but am considering getting in the epoxy table space. I use a lot of resin making hybrid pieces. They sell great. Do you anticipate any decline in the demand for river tables? Love to get your opinion.

@BlacktailStudio 3 года назад

I’d assume they’ll have to decline. Never know though!

@artistocracy 2 года назад

The legs seem to have a Gothic look to them, to me, and I love the movement in them. The table has a face. The long edge against the epxy, on the wide sided timber, looks 3D and is incredible. My Q to you, Cam, is do you ever do any other epoxy fill with any other than black? I'm new here, today, so will go check out your coloured epoxy's.

@theboz1419 Год назад

It looks like a skeleton head

@artistocracy Год назад

@@theboz1419 It looks miserable, whatever it is!

@cchrisstiaann 8 месяцев назад

I love watching your videos and your work transpire. You have a unique style and touch! I’d love to build a table someday very soon 🙏🏻

@gayleandrus7050 2 года назад

First I have to find a branch out of a hickory tree....grandfather said hickory makes the best spoons. I'm going out to look in the woods. You have helped me by just giving me a little courage to make something out of a tree. I love trees and we have lots of black walnut trees on our property. ❤❤❤❤❤❤

@sasquatch-7634 Год назад

Twice in my life i've had slabs with sawn through walnuts in them. I fill them with resin and leave them there. Also i have embedded a shiny new penny in tables dated the year i made it.

@bnj7999 Год назад

dwafawf123

@mattiaskallstrom9064 3 года назад

The snippet of youtube comment at the end is always a great touch of humor to the otherwise super informative video.

@BlacktailStudio 3 года назад

Thanks bud! I try to keep it light

@heatherwind 2 года назад

I am not a woodworker or cabinet maker, just a freelance 2D artist and fan of unique handcrafts. That said, I LOVE how this turned out. There's no doubt you put a lot of love into the project, and I agree those flowy line legs complimented it beautifully. I hope your father-in-law appreciated it, as I would be proud to have a bespoke piece like this in my home.

@mwmentor 2 года назад

Really awesome project. Your work is nothing but exquisite… and inspiring. 👍😃

@paulmayo1890 3 года назад

More charred wood projects, but still love the table builds! Thank you for ALL your content and the info packed details. I plan to pull the trigger real soon on my first epoxy project thanks to your inspiration.

@BlacktailStudio 3 года назад

Awesome Paul!

@dustinbutler6987 3 года назад

Love watching your builds. I’m getting into this and was wondering when you seal both sides of your table, do you let it cure before laying into the mold or is it ok as long as you put the mold release on melamine?

@BlacktailStudio 3 года назад

It’s fine as long as you have mold release on

@Lala_B 2 года назад

A reaction bit when your wife’s dad saw the finished desk would have been the cherry on top of this video!

@phredrocks 2 года назад

Simply wow!!! that is a beautiful desk, the grain pattern is breath taking. well done sir!

@EQINOX187 2 года назад

A little tip about the draw slides to hide them with out little modification, if you make the drawer a little wider and increase how far back the drawer goes you can mount the slides inside the drawer but you use therm on opposite sides, so when facing the drawer the right one would be mounted on the left side inside the drawer and the left one mounted on the right inside the drawer. This way you can't see the mechanism under the table or on the external side of the drawer. Another little thing when something is so highly chromed and stands out is to use a metal bluing liquid this will darken the metal making it less obvious.

@midnightqueen3332 2 года назад

Just a nobody interested in your idea and trying to get a grasp of how it works: so what your are saying is basically, maybe not double the drawer width(?), recess the bits inside so they are hidden, and enough room to still function(open/close)? If so sounds like a great start to a secret stash box in the back with a false back semi dividing forward and rear of the drawer compartment.

@Unkl_Bob 2 года назад

@@midnightqueen3332 work on that and let us know how you did it

@corycreighton9837 2 года назад

Awesome work! Would've been cool to do a clear or opaque epoxy with an LED light strip through the bottom

@burtpanzer 2 года назад

I had assumed this was the idea behind the epoxy filled gap as it would increase the wow factor by 300%...

@kmichaelwilliams4316 2 года назад

Desk is beautiful. The bullets add a whole lot of character ! If you used Black drawer slides as opposed to steel finish, they’d be a lot more concealed/invisible… The figuring on that piece is incredible !.. 👍🏻

@Spike9803 2 года назад

Hey, I really like your videos. I'm a builder and I am enamored by other craftsmen. You Sir are a real craftsman, an artist. Truthfully, I have no desire to make epoxy/slab furniture, but what you do is way cool. I love that you share your knowledge with others. You go Dude.

@AnonYmous-ry2jn 2 года назад

Beautiful desk! You could probably do something to make the hardware less conspicuous. Suppose you had a wider front panel to the drawer, and add some thin panel to each side covering the hardware? Or, barring that, could you color the steel in a kiln? You you make it blue, or black, or as I’ve seen on gun hardware, “color case hardened” they called it- you get a swirl of different metallic hues.

@louiswarmoth7354 2 года назад

The runners he used have plastic parts, as do most mechanical runners nowadays…even the most expensive ones. Some more than others…which is usually where they fail.

@ducksfan3525 2 года назад

Hey! I’m a long time subscriber and love your work. Can you ask the planer business, what’s the weirdest thing they’ve found in wood when they’ve planed? Also, did the bullets damage their planer at all? I know you said Thor gets mad when there’s metal in the slabs!

@Snarkbar Год назад

Lead and copper are pretty soft compared to steel.

@elizabethcastillo3097 2 года назад

I think that the people that complain so much about what you do are those who don’t make much of anything and are just those who find fault in 99% of what anyone is doing, I’m glad you are patient enough to still address there concerns (negative criticism) and show them you’re above all the trash they put out; I’m just grateful for the knowledge you put out for me and the ones of us that want to learn something. By the way, excellent work.

@riettepotgieter3609 Год назад

The beauty of solid wood handcraft! Nice work, a pleasure to watch.

@ilenesilverman4224 Год назад

It is such a pleasure to watch you work!

@SassChan 2 года назад

I'm a professional interior designer and a realtor. I LOVE those Flowy Line legs. They are indeed something new and different, while being 'not too crazy' so many people will enjoy them. I would LOVE to use his products in high-end projects and home staging. Thank you for also taking into consideration the need to disassemble table and desks for moving them.

@mortenthryse3392 2 года назад

Projekt: Im a chemist. Im not sure, but generally organic oils in wood tend to Crystalice when exposed to a longtime exposure to UV light and heat. Maybe make to summer test of two small pieces one in a south window and one in the dark and Make a video about the result.

@zenadra Год назад

Hundred years late, just found you. love your work. When doing soft close draws build a box to hide the gear

@cakesbywen 2 года назад

as a cake decorator i would love to see a wedding cake stand of somekind!!! Love watching you. I am obsessed with wood working and such.

@darenm617 2 года назад

What step of the process of making a table would you say gives you the most enjoyment. Hunting down the right piece for the project? construction and sanding the piece? or finishing and final assembly? Thanks.

@jayashrishobna 2 года назад

I think he's said before that he enjoys finishing the most and sanding the least.

@louiswarmoth7354 2 года назад

Delivery and collecting the check !

@GustyOutdoors 3 года назад

I would love to see some kind of fire and ice table? I dont really know how you would implement that but I’m sure you can figure something out! I’ve also got a question, I was wondering if you know any good techniques for a table I’m planning, I need the legs to be wood but I don’t know a way to make that look nice and be sturdy at the same time.

@BlacktailStudio 3 года назад

Not sure the style you’re thinking!

@GustyOutdoors 3 года назад

Yeah actually, that would make a really good video in my opinion!!

@skatingcuziwant2 2 года назад

More drawers please. This table is aesthetically pleasing

@Capt_Caveman205 2 года назад

Oh i love the legs you chose for this table. Beautiful!!!

@aceofaces7681 3 года назад

I guess I would like to see another smart desk thought that was cool When you move into your new shop are you gonna hire an assistant to help you on your projects?

@BlacktailStudio 3 года назад

I’d love to have one from time to time

@harryhead9427 3 года назад

Id love to see a chair with a resin river aspect down the middle! I was wondering what the water pop is for and how long you leave it to dry after doing it?

@Bobo-gm9fd 3 года назад

I'm sure he will answer you but you water pop to raise the grain of the wood to get a nice smooth finish normally spray wood and wait till its dry and then sand it back, love your river chair idea

@BlacktailStudio 3 года назад

Bo bo is right. And someone did an epoxy rocking chair. Was super cool

@harryhead9427 3 года назад

Cheers!

@susoni1 2 года назад

These are works of art. Masterful and extremely beautiful 🥰

@mermaidswhimsy8601 2 года назад

Wow I don't even make cabinets or anything even remotely related to this but you are a master in my opinion. Wow those legs look amazing. You are the best son in law ever! Those table legs are amazing looking with your gorgeous desk top. Phenomenal result. I just loved watching your process for what ever that is worth.

@lizsmith6633 2 года назад

That is beautiful. I envy your work room and tools. You have a great eye and talent. Keep making those beautiful pieces. You should get yourself a branding iron. These are going to last for fifty years at least.

@Tazza6191 3 года назад

Black finish picture frame to cover runners of draw. Same finish as the legs.

@colinbateman8233 2 года назад

I’ve watched a number of videos and appreciate honesty and commentary

@Chulitatr 2 года назад

I love the leg designs you use. Very unique.

@guydevlin6039 2 года назад

I'm an English college student and this stuff is so calming. I can't rly give you advice unless you want geopolitical advice 👌👌

@lanecobb4150 3 года назад

That’s how you Haiku. 🤣🤣🤣

@nancyandersen6803 2 года назад

Hafele and Wurth both have black powder coated drawer glides. Blum...from Wurth has a touch open and soft close. Adding a full skirt from cut-offs and book matching grain would also conceal hardware. I so enjoy your videos. The fast pace video and informative narrative keeps my interest. Thank you for your editing format.

@ceciliahuck3423 2 года назад

Just watched your video for the first time I enjoyed it and it’s very well done really easy to understand!! Thanks

@gotohowie 3 года назад

Where are the legs from? Where can I get some like this? (Btw. Cool looking table!) 👍

@BlacktailStudio 3 года назад

Thanks, the link to these legs is in the description!

@daniellegault4758 2 года назад

Again, simple maps replicated via the sanding process. Maps of states for instance even stylized ones. Talk to your clients! Some might be interrested in a project like that! Who noze LOL!

@raybozzer8119 2 года назад

Old fashioned farm house table with drawers. As always you made a great desk. I find your videos very informative. I have never done anything with epoxy, but may try it one day Keep up the great work.

@braxtondamico3599 2 года назад

That desk is drop dead beautiful man. Koodos!! Love watching your work, ya got me so into looking into this as my hobby! Great work

@pearcegolding3544 3 года назад

Would you ever take in and teach someone? I'm quite interested

@Shaka_Vibe 3 года назад

With all the videos.... And with all the detail he gives.... I think he is already teaching all of us.

@pearcegolding3544 3 года назад

@@Shaka_Vibe that's true actually I'd agree but I'm a furniture design and maker student here in Ireland so it would be awesome to be under someones wing just for the experience and knowledge of it plus I'm young and only starting so I don't have any of the machines he has or most tools.