Тёмный

Street Racing Channel S10 Steering and Front Suspension Setup at Lucore Automotive! 

Lucore Auto and LucoreRacing
Подписаться 40 тыс.
Просмотров 46 тыс.
50% 1

Billy and the Street Racing Channel team have that little S10 back in one piece and fired up with his new motor and all new front suspension setup, so it's OUR turn to help get it dialed in! With the huge changes made to the front half of the truck this is basically starting over from scratch, new tubular K member, new tubular upper and lower control arms, new steering rack, new bump steer kit... it's all new! So here we go, let's set him up a good baseline to go test!
As with everything in the custom alignment and suspension setup world you really never know what all you are getting into or how long it's going to take. It's honestly even hard to estimate because every car or truck is different, even if they are exactly the same parts they could be installed slightly different. Or the vehicle they are installed on could be slightly different... when we're talking in tenths of degrees every little bit is a big deal. As with Bill and The Old Man's Garage Malibu, or really any custom drag racing alignment we do it's the fine measurements and tolerances that take the time. This isn't a "Toe and Go" kind of deal!
Custom race car alignments, custom alignments, lift alignments, lowered alignments, regular every day nor daily driver alignments whatever it is we do them all here and we do our best for each and every customer. However when we're talking racing application we make sure to be extra super duper careful to get all of this right because a mistake or failure at these speeds can very literally mean the difference between life and death.
Huge thanks as always to all our subscribers, followers, fans, and customers who have made our business successful and gotten our channel to where it is today. Special thanks to the SRC / Street Racing Channel / SRC Garage / Old Man's Garage / Junkyard Digs folks for showing such amazing support for us over the past several months. Without all of you we wouldn't be anywhere near where we are today. We hope you enjoy this one!

Авто/Мото

Опубликовано:

 

19 фев 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 190   
@scottbobcat8450
@scottbobcat8450 Год назад
There is no need to apologize for working for a living
@LucoreAuto
@LucoreAuto Год назад
Thanks Scott we do our best when filming to control as much as we can control but, this is real working and wrenching here.
@scottmanders6809
@scottmanders6809 Год назад
@@LucoreAuto much Respect
@gtnoslp
@gtnoslp Год назад
Good job!
@jeffbear5317
@jeffbear5317 Год назад
I must be goofy as hell 🤣 I do alignments all day then go home and watch you do alignments .
@glennmanchester5696
@glennmanchester5696 Год назад
You put the time in on Billy's stuff and the whole family I'm sure I'm not the only one to say THANK YOU SO MUCH FOR KEEPING THEM SAFE WE ALL APPRECIATE IT VERY MUCH IM SURE your definitely a good man and take pride in your job ! I'm hooked on your videos now lol I had no idea how much goes into getting off the line not only safely but w out spinning and also in a perfectly straight line bravo my friend keep our racers safe !
@rayrussell6064
@rayrussell6064 Год назад
The SRC gang has taken stock in gapabees and with Rich alignments they will be as straight as a arrow. Thanks for all you do Rich to make the racing community safe. God bless and as always be safe 👍
@LucoreAuto
@LucoreAuto Год назад
Lol certainly wouldn't want to be sitting next to this little truck waiting on a light to drop! She's gonna be a whole new level of mean and we're happy to do our little part!
@waymonhutto2274
@waymonhutto2274 Год назад
While on the track the front tires of that truck have never spent much time on the ground. Rich is an expert who understands the science behind the correct alignment. Billy and Rob has built a beautiful race truck. Looking forward to a winning race season.
@Pyle81
@Pyle81 Год назад
Very interesting Rich. And I can vouch for the Green Lock-Tite. We use it on some parts that if they come lose, And out of adjustment.It would be ALL BAD for the operator. And could lead to serious injury or death. And thank you for the PSA on the loosening bolts on the upper control arms. One of those coming lose at the big end of a run could be a catastrophic ending for the driver and anyone near the car.
@jeffjankiewicz5100
@jeffjankiewicz5100 Год назад
The S10 is BACK! And it`s gonna take the opposition to Gapplebees. What a BEAST! Do your thing Rich, get it straight, a to b straight as a pin. Stay safe all, God Bless.
@LucoreAuto
@LucoreAuto Год назад
Certainly wouldn't want to line up against, or bet against this thing with Billy piloting it! Whole new ballgame for 2023. Took a lot of doing but have a pretty good feeling she's gonna be on rails!
@Slicpimp420
@Slicpimp420 Год назад
You know what guys! Big respect for filming in a FULLY FUNCTIONAL SHOP! That just shows this is not a tv show this is not a made set for a RU-vid channel. This is real deal. Real working hard fellas! Again big respect for that! You guys do fantastic work! Keep it up!
@greglange3048
@greglange3048 Год назад
up until I watched OMG when he had the Malibu at Lucore... I was under the impression Austin owned it and Rich was an employee....Definitely need some Lucore window stickers on the S10 and Falcon., Your suspension setup contributes to their success.
@chrislovett9711
@chrislovett9711 Год назад
Shops like Lucore are hard to find People like y’all and the SRC Family are why I can’t wait for content ❤️🇺🇸❤️
@billyray8062
@billyray8062 Год назад
Rich, you are a master at setting up racing front ends!! Great job as always guys!! Gotta keep Billy going straight down the track!!
@LucoreAuto
@LucoreAuto Год назад
Thanks Billy, we do our best for everyone but for these boys it's even more important. Gotta keep these guys as safe and straight as possible!
@kevinswensen3375
@kevinswensen3375 Год назад
Much respect for the Lucore team, I really enjoy the content. Thank ya much
@LucoreAuto
@LucoreAuto Год назад
Thanks Kevin really appreciate that! We're extremely fortunate to have some awesome customers and partners too!
@quickdeuce
@quickdeuce Год назад
X2 Kevin,, X2
@wesleyfowler8363
@wesleyfowler8363 Год назад
Gotta love a shop that will actually break down what each step is actually doing when performing an alignment on a vehicle! Race or street it’s great information to pass along!
@cfmechanic
@cfmechanic Год назад
Can't wait to see how it rides. Thanks for all the tech tips. There are tons of tire and alignment shops but I have only found one guy who can get my car to go str8. Now I'm a customer for life.
@alankieffer7631
@alankieffer7631 Год назад
Great video I think what sets Rich apart his is patience and attention to detail and the drive to do it right the first time and the truck looks fantastic
@LucoreAuto
@LucoreAuto Год назад
Not giving up, and but being willing to walk away then come back to it is a huge part of success with this stuff. Don't get overly frustrated, and be willing to admit sometimes you need another pair of eyes or hands. If you never give up you'll never lose 😉 Thanks for the support Alan!
@charlie225
@charlie225 Год назад
Come on Austin, its a Live Set and a hell of a Show!😉
@LucoreAuto
@LucoreAuto Год назад
Lol maybe one of these days we'll just do a live stream from the shop and people can see how this REALLY all goes without any editing ;)
@davidjenkins1958
@davidjenkins1958 Год назад
@@LucoreAuto I’m just glad to see that hideous dog turd gone from the back of his head. LOL I like to give Austin grief about that pony tail.
@tommyhayworth887
@tommyhayworth887 Год назад
Rich you are very sharp on front-end geometry Lucore always gets it done and saves the day.
@landan_melton
@landan_melton Год назад
Man I wish y’all were located close to me in Knoxville TN. It’s so hard to find hard working blue collar people that are honest. Not to mention the wealth of knowledge and experience! Y’all are awesome 🤘🏼💪🏼🏁🇺🇸
@carpenter5575
@carpenter5575 Год назад
Thanks rich and crew for taking care of our boys
@Xtroll1738
@Xtroll1738 Год назад
It's nice to see a shop and their service techs that are conscientious about their work and take pride in doing the best job possible. Goid job guys.
@donnielove4456
@donnielove4456 Год назад
Rich Getting After It. Team Lucore 💪💪
@LucoreAuto
@LucoreAuto Год назад
Never give up, keep on wrenching! We'll win in the end 😀
@rogerchevelle8543
@rogerchevelle8543 Год назад
This was a great video. I can see why Rich and lucore are the go to guys.👍
@stevemacdaddy9909
@stevemacdaddy9909 Год назад
Man I can't wait to see Billy's new combo at work. If I lived in Ohio you guys would be my go to shop.
@jerryfrederick6610
@jerryfrederick6610 Год назад
Super Great play by Play presentation. Works well on camera. S-10 is going to be a beast. Love all the detail Big Rob had a hand on working with Billy.
@marksiniard9731
@marksiniard9731 Год назад
Awesome job at setting his suspension as well as walking us through what you actually did! Great work and content!
@jasonhastings5538
@jasonhastings5538 Год назад
Man Jeff @ CIA did a killer job on the paint!!!
@LucoreAuto
@LucoreAuto Год назад
Heck yes he did! Ridiculous attention to detail!
@keithgriffith6002
@keithgriffith6002 Год назад
Glad it’s you they bring their stuff to. You are so particular,I know our little buddy will be safe. 👊🏻
@adrenalinejunkie126
@adrenalinejunkie126 Год назад
Comical and educational Rich as always lol. I used to be a front end man years ago, so pretty cool watching get my favorite S10 running straight
@brettl2162
@brettl2162 Год назад
Woo Hoo time to break some hearts with the S10 again. I love watching you guys. I feel more knowledgeable after I see your videos. The Hoskinsons and Lucore make a good team.
@fredgursch6056
@fredgursch6056 Год назад
I'm so glad you guys are in business. You really are the kind of people that can be trusted. Thank you for all that you do to keep racers safe.
@deerdust3040
@deerdust3040 Год назад
Great job getting it adjusted. I know it can't be as easy on a race vehicle. We don't know yet with Billy's new setup, but if it's anything like the history of the truck the front end will be off the ground for the first part of the track. I can hardly wait for some test hits. All the best to you guys! Keep it straight and keep it safe!!
@vincestermin5153
@vincestermin5153 Год назад
Great job on the S10. I love that you really care about the safety of these drivers too.
@novanut1964
@novanut1964 Год назад
thanks for helping billy amd keeping him safer, good video, excrllent work
@PaulRhodes420
@PaulRhodes420 Год назад
I hope to see this bad boy someday soon! This truck is so awesome, I love what he did! Out with the old, in with the new old!!
@davidhiggs5670
@davidhiggs5670 Год назад
Rich, thanks for the education!!! Don’t worry about the noise, it’s a garage/shop it’s expected.
@brucefrye8799
@brucefrye8799 Год назад
Great video Rich. Thank you for the PSA on the upper control arms. That's good information to know.
@patricklinde6647
@patricklinde6647 Год назад
Love ur content. U really know what u r doing. Thanks to Billy an Bill from SRC, I found this channel
@LucoreAuto
@LucoreAuto Год назад
We are always grateful to have more of the SRC / OMG family here supporting us, and helping us support them! We really appreciate it Patrick!
@stephenmorrish
@stephenmorrish Год назад
Sound: The fact that you are in a working shop with ambient noise isn't an issue, we understand. What you could do to help is to use a mic, if you voice is clear the other sounds are less important. When you record a second separate sound source you can adjust levels in editing. Other RU-vid mechanics I watch are using clip on radio mics. Allen from the Skid Factory often has his clipped to his hat. Dealing with multiple sound sources does add extra complexity to editing but would make a massive difference to overall video quality.
@franker1111
@franker1111 Год назад
Holy shit thank God you mentioned the hime joints, I checked both mine and they were both ready to fall out. So I now have them coated in the green lock. Thanks again for the important information 👍
@mocarpenter8836
@mocarpenter8836 Год назад
What a blessing to have a Fantastic alignment shop so close!!! Props to Lucore for always Killen the game !!! 🇺🇸🏁🇺🇸
@jonathanhanners6057
@jonathanhanners6057 Год назад
Love the video and all your information on everything and letting people know some of the problems people are having with some things that are being used
@kevinpalmer2975
@kevinpalmer2975 Год назад
I know absolutely nothing about alignment, so these videos are very interesting for me. Tell Billy to fix that belt squeel.
@augie-dawgiewright3798
@augie-dawgiewright3798 Год назад
A little shot of P B Blaster, or W D 40 on the belt with the eng. running & it will stop squealing.
@chrisbryant1657
@chrisbryant1657 Год назад
👍👍commenting for support! Rich points out the good and the bad. Attention to detail as well! 👍💪
@1973406
@1973406 Год назад
Rich, you do great work and I really enjoy each and every video! One recommendation though, fender covers to protect paint.
@davidjenkins1958
@davidjenkins1958 Год назад
Rich, I sure hope the people of the Columbus, Oh area appreciate what they have in Lucore Automotive. A shop gets a vehicle in for a front end alignment, with parts on it that didn’t come on it and Rich Lucore does his magic. I refuse to call you a technician because you are a master mechanic. I just wish I lived closer to you rather than central Maryland to have things done.You Rich are the best.
@Amxracer
@Amxracer Год назад
Can’t wait to see the truck back in the winning circle 🏁
@LucoreAuto
@LucoreAuto Год назад
It certainly won't be long! This thing is going to be a true monster!
@cdn9134
@cdn9134 Год назад
Something different I would like to see a Rat Rod build for Jeremy next 🇦🇺🇦🇺
@BudgetBallinGarage
@BudgetBallinGarage Год назад
There's a smart idea with the vacuum caps! 😂 💯
@LucoreAuto
@LucoreAuto Год назад
There's the right way, the wrong way, and the way that makes us not bleed! 😉
@shoresharp8349
@shoresharp8349 Год назад
Rich your the racecar alignment wizard!!!
@LucoreAuto
@LucoreAuto Год назад
Time, patience, and a good understanding of geometry! Thankfully we get a whole lot of practice!
@tico4940
@tico4940 Год назад
Lucore does some good work,and for chassis work they know there shit.truck looks good with that killer patina paint work,never know you replaced the sheetmetal.
@richardwoomer9896
@richardwoomer9896 Год назад
ive only one thing to say -- DAM YOUR GOOD !!!!!!
@billwestphal1421
@billwestphal1421 Год назад
Need to have the Lucore PSA segment. It's was explained in layman's terms so everyone understands. Thanks
@jimdriscoll5146
@jimdriscoll5146 Год назад
Your attention to all the details is amazing. Thanks for keeping ur boys going straight.
@dawgdaddy793
@dawgdaddy793 Год назад
You are the MAN at race front ends!
@timothymetzler7715
@timothymetzler7715 Год назад
Yea I agree Rich no reason to be sorry this ain't your 100% money source we appreciate your videos just as they come
@donsimonsen1658
@donsimonsen1658 Год назад
great video. And shows the quality of work.. Lucore does.
@Mr688895
@Mr688895 Год назад
Great video and some awesome tech on the control arms. Thank you for that.
@raymondstilesjr.1804
@raymondstilesjr.1804 Год назад
Can't wait to it run again good video
@ellisgroo6742
@ellisgroo6742 Год назад
great info!
@Dirtnap300
@Dirtnap300 Год назад
great attention to detail.. which i am coming to expect from you guys.. I learn something everytime.
@shaunroberts9361
@shaunroberts9361 Год назад
Good job for sure and Thanks for sharing...
@gtnoslp
@gtnoslp Год назад
Good job!
@venombob3364
@venombob3364 Год назад
truck looks freakin awesome man this video really shows alot of the work yall have put into this thing.
@scotthazelton519
@scotthazelton519 Год назад
Thanks for sharing
@leprechaungarage
@leprechaungarage Год назад
I always enjoy your videos . These racecar alignment videos really interest me for sone reason . I’d love to add an alignment rack to my home shop to learn the trade .
@MrLangleylad
@MrLangleylad Год назад
Great content Rich ! thanks for sharing your knowledge with us . I love these trucks , I have one of my own .
@LucoreAuto
@LucoreAuto Год назад
Thanks Mike! Great little machines, wish they were still building trucks like these! Clearly they have a WHOLE lot of potential too 😉
@brianstephanierobertson357
@brianstephanierobertson357 Год назад
Great job Rich!!! Thanks for sharing with all of us!!!
@terryeustice5399
@terryeustice5399 Год назад
Great job Rich. Love your work. Thanks for sharing! ❤️💯
@chevelleranch7481
@chevelleranch7481 Год назад
Great job Rich!!
@ScottSmith-dd6iy
@ScottSmith-dd6iy Год назад
Love the video Rich, Great example of what it really takes to get anything done. LOL Nothing is ever simple. I gotta say, When We build things, nobody ever thinks of the other guy that has to follow us up, IE Alignment guy, interior guy or what ever task that is not being done by the car owner. I'm guilty of that too. So Good job on handling situations where the suck factor is a 10.
@jeffyoung245
@jeffyoung245 Год назад
Your work is something to be very proud of
@allxdup1909
@allxdup1909 Год назад
Nice work mate.
@gradybaby8309
@gradybaby8309 Год назад
shop videos should sound like a shop video... success... its all about the angle of the dangle.
@bobbysmith8120
@bobbysmith8120 Год назад
Great job enjoyed the video Thanks for sharing from Alabama 🇺🇸👍
@frediefarmer
@frediefarmer Год назад
👍🏽🇺🇸👍🏽 awesome job Rich..
@dustyearly3220
@dustyearly3220 Год назад
Good job
@lincolnstovall9471
@lincolnstovall9471 Год назад
It’s a race car!!! Nothing like stock components. 🤙👍🤙👍
@jamescantwell572
@jamescantwell572 Год назад
Love your video brother keep up your video brother. From Austin texas 👍👍😊
@justinyoung9509
@justinyoung9509 Год назад
Love the content
@LucoreAuto
@LucoreAuto Год назад
Thanks Justin! We'll keep making it, you keep watching it!
@fredfranklin1965
@fredfranklin1965 Год назад
Yall remind me if myself.keep it up. GOODSTUFF GODSPEED & GODBLESS
@hankclingingsmith8707
@hankclingingsmith8707 Год назад
GREAT JOB. LOOKS LIKE A 1000 ALIGNMENT JOB
@dougbradley1568
@dougbradley1568 Год назад
Good video Rich, the S-10 is gangster as fu$k 😎
@clydegreenwood5673
@clydegreenwood5673 Год назад
I like watching your videos you learn something everytime and good luck and be safe and God bless you
@Final_Boss_Racing
@Final_Boss_Racing Год назад
My man ain’t having no luck in this vid!!
@quickdeuce
@quickdeuce Год назад
Daymn,, tha S10 looks awesome don't it.
@letstradepaint2463
@letstradepaint2463 Год назад
Thanks for teaching me something.
@kennethchapman9564
@kennethchapman9564 Год назад
They know you will work on it till it's right. That's why your shop is always busy.
@LucoreAuto
@LucoreAuto Год назад
That's our strategy for winning 😉 Never give up, never surrender!
@allencobbs4047
@allencobbs4047 Год назад
Nice job need to find someone down here who can do what you can still looking forward to the break caliper deal thanks for the great videos
@jasonbrinegar6759
@jasonbrinegar6759 Год назад
Very nice!! Sure beats these strings im using! I did at least get one of those fancy air bag jacks tho. 😁
@donalddooley4737
@donalddooley4737 Год назад
Great advice to be adware of
@Canadianchucknorris69
@Canadianchucknorris69 Год назад
I just had a failure of my heim joint on the drivers front one, broke the bolt right at the locking nut, going to move to a non heim joint set up for my 4050lb GTO that sees lots of track but way more Street! Thanks for sharing!
@johntilton8860
@johntilton8860 Год назад
Love your work keep it up if I where closer I’d have you do my front end but I live in Nebraska and alignment centers at least good ones don’t exist the sucks
@rodneyf.9595
@rodneyf.9595 Год назад
Love the smiles while looking at it . Thank y'all for the video, maybe some day we are going to try to run up y'all's way from N.C. Just wondering rich do y'all get jobs in three's? Seems my shop has got a run on jobs in three's just curious is all great work brother. 👍
@mychaleporter6806
@mychaleporter6806 Год назад
Rich youre great
@LucoreAuto
@LucoreAuto Год назад
Thank you! Just wrenching working and paying the bills!... and working with some reallllly cool stuff 😉
@tommycook9620
@tommycook9620 Год назад
Hell yea
@LucoreAuto
@LucoreAuto Год назад
We're ALL excited to see how this thing does for the 2023 season!
@dragbikedemon
@dragbikedemon Год назад
Live Action!!
@LucoreAuto
@LucoreAuto Год назад
Dang need brother! 😉
@charleybetts1053
@charleybetts1053 Год назад
Billy really caught everyone's attention with a few wheelies... now he has an extra 500+ hp and they took 300lbs out of the nose. Lol. This is going to be interesting!
@krazyphucker369
@krazyphucker369 Год назад
I'm a cheap ass so I just ratchet strap a peice of pipe to each of the front tires and measure off the back tires for toe in and bump steer would be nice to have all the pricey tools you have looks like it makes it super easy!!! It's nice to see how it's professionally done!!!
@freddiemoralez1536
@freddiemoralez1536 Год назад
Thumbs up and God bless all
@joaquinmireles3912
@joaquinmireles3912 Год назад
Think it will kick butt again with this engune
Далее
Украшаю чехлы 🎀
00:51
Просмотров 246 тыс.
Maybe i need to add instructions @popflexactive
00:14