Stronger Traxxas 2WD Transmission Option - Pro Series Magnum 272R Overview | RC Driver

Подписаться 220 тыс.

Просмотров 73 тыс.

50% 1

When Traxxas Released the Drag Slash, many people honed right into the new Pro Series Magnum 272R Transmission bolted to the rear of the truck. Everyone wanted to know if you could bolt the new stronger and tunable transmission into their existing 2WD Traxxas RC car. Well, the answer is yes and it’s easy to do so with the optional 272R transmission kit. In this video great goes over the benefits of this new transmission and the reasons why you may want to swap out the transmission if you're looking for options for your current transmission set-up. If you have a modified Slash, Bandit, Rustler or Stampede, you should really watch this video
PRODUCT FEATURED
Pro Series Magnum 272R Transmission
By: Traxxas
Kit Type: Assembled
Part Number: 9495
Price: $149.99
Buy at Amain: snp.link/468e8efb
Visit: traxxas.com/products/parts/ma...
Suggested Support Gear
Diff Oil Set, TRA5136X- snp.link/126388a5
SHOP FOR RC:
SHOP AT PRO-LINE: bit.ly/2Hq4K0G (Use code RCDRIVER10 to save 10% your order)
RC DRIVER SHIRTS & MERCH: teespring.com/stores/rc-drive...
WORKSHOP STORAGE RACKS: bit.ly/3xNgwZj
Don’t Miss A Thing! Follow Us:
Subscribe: bit.ly/SubToRCD
Website: bit.ly/VisitRCD
*Notice: Some of our articles, videos and descriptions may contain affiliate links or coupon codes, which means that if you click on or use one of the product links/ codes, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Thank you for the support!
#Traxxas #raxxasSlash #RCDriver #rccar #RCruckt #RCModel #RCSpeedBoat #rcparts

Опубликовано:

23 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 192

@unkulwilly 2 года назад

All 2wd Traxxas models need this!

@rcdriver 2 года назад

Well, not all. But if you need something stronger or need tuning options, yes. My brushed Skully and Craniac Stampedes don’t need it. ☺️

@The_RC_Guru 2 года назад

@@rcdriver they all need it man. Even more durability for the newbies sells them on more for years. They get discouraged with frequent breakages.

@RobertNES816 2 года назад

They should come with these transmissions as standard equipment you're right.

@donovancook8218 2 года назад

It’s called rpm case, sealed diff, wowwww saving $75

@dc5050 2 года назад

We’ll look who got their wish

@theirishaxe9405 2 года назад

I usually don't have allot to say about Traxxas. But this is pretty cool. I always used to have to buy a hot racing sealed diff case for these to run fluids. Also liking the metal motor mount

@2down4up 2 года назад

I see a lot of people saying this is overpriced or Traxxas it’s price gouging. While I agree it’s very expensive and maybe they are overcharging, without knowing all the costs from the beginning of development to it being on store shelves, I think it’s a little unfair to assume it’s unreasonably priced. Especially with the current state of supply and demand for everything. Also assemblies that come apart and go back together very easily is always a good sign of quality design and production. This is true for pretty much everything, not just this transmission. Traxxas has a history of bringing out new performance parts that are initially overpriced and then they drop the price. Let’s hope that’s the case here

@Techforlife280 Год назад

I agree.this could not have been said any better.the economy also is in a very rough spot they have to make profits somehow

@ryansilver9601 Месяц назад

It's now finally at $100, which feels like the right price for it

@PhilBender612 2 года назад

I picked up one of these new transmissions about a month ago and built a drag slash with it. They are much nicer than the old ones.

@muddfoot69 2 года назад

Traxxas needs to make a running change to their cars (meaning include this change)….It’s not like they haven’t been selling the same cars for 15+ years

@bluegroovemodelsports9650 2 года назад

Great video as usual . Great review of this nice upgrade

@charliemaybe Год назад

The only thing I like about this is the fact I don’t need to disassemble the entire rear end to access the diff. I just don’t know why this diff cost about half of my rc car, I have a 2wd vxl slash.

@blaketundra3216 2 года назад

Just saw they are selling the VXL flagship models with a Magnum 272r! I'm loving all these new options from Traxxas!

@jawknee21 Год назад

Now you don't have a choice. They raised the price and they all come with this now.

@GazVanDyk 2 года назад

Love your channel mate ✊🏻

@OrnalGriffith-qp3pw 9 месяцев назад

What's Up I'm putting this in my 2wd Rustler ASAP!!! Like you say when you out n about and need a quick fix won't turn into a documentary.... 😂... putting up some content on it soon as I get a computer.... Thanks Champ 🏆

@thelurker9472 2 года назад

Dropping this into my lcg race slash

@Jlemus01 2 года назад

That's actually not bad compared to the old one which prices go from 65 to 85 dollars. The proline one is 120 dollars with one option on the spur gear a 56t The 272r comes with 3 spur gears and the extra hardware

@NikkiNexo777 2 года назад

$140! They are out of their friggin minds. Does this come with a tube of KY as well, or do they just stick it to you dry?

@spacepopeextremis9746 2 года назад

LOL!!!

@313yankee 2 года назад

Dry🤣🤣🤣

@NikkiNexo777 2 года назад

@@313yankee Typical.....🤣🤣😵‍💫😵‍💫

@sario22152 2 года назад

Dry ×ox .I'm staying with rpm and hot racing diffs

@dustinsims3464 2 года назад

Dry. And soon as tires spin the truck 180's. Only thing better is I haven't had to tear it down to replace any gears. Otherwise it's a dry fukin

@DimiS1978 2 года назад

For $70 maybe, for $140 NOPE. I already have an RPM gearbox with an aluminium plate in one of my Rustlers. Wouldn't mind that diff though.

@keaginm2791 2 года назад

Hot Racing sells a sealed diff so you can use fluid 👍

@jmrcs2935 2 года назад

top shaft is 11 bucks hot raceing sealed diff 30 bucks traxxas diff fluid 30 bucks there's you 71 upgrade on a stock transmission

@keaginm2791 2 года назад

@@jmrcs2935 exactly, it doesn't even have tk be that much if you use TLR fluid

@jmrcs2935 2 года назад

@@keaginm2791 even if you don't get the diff fluid at least replace the bearings since you in there

@josephoberman331 2 года назад

FLM sealed diff !

@storyracing387 2 года назад

I need to make this an add on to my race program. That and a brushless system.

@fozzy7199 Год назад

I put one of these in my rustler/slash conversion. No complaints, other than the price versus the old one. Doh: I just realized I didn't need to remove the shock towers, that would have saved me some time today when I had to replace the case on the old-style transmission of my other rustler.

@ejfatb 15 дней назад

Haha, that’s me when I haven’t worked on my cars for a long while.

@juggernot79. Год назад

Awesome video brother i just started to indulge in rc cars love it. God speed

@tattedandgatted 2 года назад

I put the sidewinder 1/8 on 6s in my stampede and blew the transmission after a few minutes. Been trying to do the bullet proof mod but might try this. They run around $125 on ebay.

@BeatniksVids Год назад

I bought a stampede when they first came out. I remember cutting the plastic motor plate off the transmission and putting a metal one on maybe from an LS-II (it was anodized blue just like that). Was racing both an LS-II and a TRX-3. Just thinking out loud here.

@jeremymiller2340 2 года назад

Reminds me of the old fall guy truck, older video got by me, the transmission is definitely going into the bandit

@donkhron5590 2 года назад

Imma have to start a build now!!!

@Friskee62 Год назад

I run 2 Slashes, one for 2wd short course and the other for oval asphalt...seems like this unit would help in both. On eBay they go for..$76.97.

@jimcurt99 Год назад

This is interesting- I have a VXL Bandit with the Magnum- I wasn't even sure what it was. But I said "sounds cool- lets get that one". Now it is TOTALLY my favorite car- not easy to drive- but it smokes my Rustler on the straights. I my get a Magnum ant try it in one of my Slashes...

@bradwoods1087 2 года назад

Very nice mu rustler vxl needs one of them !

@RobertNES816 2 года назад

$140 is crazy high. $100 would be more like it. Traxxas always shoots themselves in the foot with their prices. Traxxas uses cheap Chinese labor to build their products so the high prices are just price gouging.

@ezrabegin8234 2 года назад

It isn’t that bad 😂

@nb6584 2 года назад

No $140 is too much. That's Damm near half the price of the rest of the vehicle all parts servo brushless Velineon system ect so yeah that's a lot of money for it!.

@questendervids2090 Год назад

I could just buy another chassis and part it out at that price. Would be cheaper. $140 is almost halt the cost of a rtr anyway.

@honda116969 Год назад

@@ezrabegin8234 yeah because you're not one of the Chinese slaves building the shit... If you worked all day and made $2-5 bucks & then they (Traxxas) turn around and sell it for $140 when you know it cost them $15 including parts & SLAVE labor so yeah $140 is a little high imo...

@dravenrk1 Год назад

Just piece it together. If you already have a housing just buy the gears

@RazorRC 2 года назад

Hopefully this comes stock on the 2WD vehicles soon. They really need an update.

@NikkiNexo777 2 года назад

I won't hold my breath.

@rcdriver 2 года назад

We’ll see. At the very least, it would be cool if they increased the build kit options and include this transmission.

@cwatson42785 2 года назад

Lol yeah right. They are still on V1 versions of most of their lineup. Not trying to sound like a arrma fanboy but I love how each year they try to make updates and tweaks to improve their models. I'm sure it helps with sales too which is why I don't get why traxxas doesn't make improvements every year or 2. People would buy a new one if they did. You bought a stampede 5 years ago it's the same as a new one today

@ventisette. 2 года назад

They really need to be retired and replaced with something that wasn't designed back in 1993. Oh, and the plastic driveshafts can fuck right off!!!

@Rch_P 2 года назад

Well this comment aged well. Traxxas granted your wish last week. We’ll, sort of. They now include it in their vxl lineup.

@extec101 Год назад

broke the rollpin and used a rollpin to a associated tc3 hex, feels alot stronger and thicker in material.

@slashraptor9317 Год назад

People are saying it’s too much money for this transmission but depends on where you go as well I know at hobbytown in my area they are 109.99 compared to a drc fully built transmission that costs 159 I’ll take this transmission all day and plus it’s lighter then that drc transmission

@rckids6557 2 года назад

Good brother 🙏

@binojgeorge8135 2 года назад

Nice

@bordfronco 4 месяца назад

U need this if you go for a brushless system

@dkatchi1 Год назад

What is the maximum pinion gear with 76T Spur? 35T? Please advise. Thanks!

@doubleaaaron 2 года назад

I have a traxxas skully. (mostly a shelf queen) It has strange handling and driving characteristics I can't figure out. It hops when accelerating and dances around with wheelies. I had put putty in it at one time then back to grease, but I cant figure out what's going on. Does anyone know what I can do to the rear end and also I would like help with the shocks and springs set up. What's a good set up I can use?

@grandwaha 2 года назад

I'm on my second set of planetary gears on my Monster Mutt Stampede. Running stock motor & 2 cell battery. This maybe a solution

@geraldjackson263 Год назад

Tbh the older trans is still good only thing I would do is a hot racing diff if you need tuning capability, not knocking the new it’s nice but the price for me I can build a older one for like 50 😂

@benjaminhunt2395 2 года назад

That might be good for my racing stampede

@dustinsims3464 2 года назад

On asphalt.

@benjaminhunt2395 2 года назад

@@dustinsims3464 dirt track

@paulmeier6585 Год назад

10k is so runny, I went straight to 100K, it still opens up off-road and in turns. I don’t think I would go less than 50 K that would be completely open just like stock. 100 K really feels perfect, it’s smooth and I wouldn’t need more differential action unless I was only driving on the road.

@BassSniperTV Год назад

Well it's meant to be in a drag car.

@paulmeier6585 Год назад

The drag slash comes stock with 500K in it, which is a pretty solid posi. 100K is a slightly tighter differential than stock grease, my 200 K diff is a nice medium for drifting and still good control.

@tobydyes 2 года назад

Any pin breaks use old drill bit

@aaroncavanaugh8241 2 года назад

How about the RPM hybrid transmission as an alternative? I just got that and got a bunch of goodies to make something like this… a full set of Protek RC ceramic bearings in it (even the slipper clutch bearing), Traxxas top drive gear assembly (for drag slash, the new pressed/keyed top shaft setup), Hot Racing Sealed planetary differential (with a fresh/new set of internal planet gears from Traxxas), new pressure plates from Traxxas, a slipper clutch rebuild kit (with stock Traxxas pads and a set of Aluminum pads and carbon fiber pads from Hot Racing to check which I prefer the feel of), Hardened Steel Idler Gear from Hot Racing, an uprated Idler Gear Shaft from DragRace Concepts, and a Dynamite Stainless Steel Screw kit (would’ve gone with RC Screwz but it isn’t in stock for who know how long every time I seen it it’s not in stock).. I’ll be using either 20k or 50k diff oil from Mugen.. it’s going in a Rustler XL-5 with hobbywing ezrun max10 (3200kv 3652 g2 motor) set up for racing at my local track (I’ll be running it at track and in my yard when spring/summer weather comes back and on 2s)… nothing really fancy but fun and drivable

@aaroncavanaugh8241 2 года назад

First run was impressive on 2s! Carbon fiber pads for the clutch (they’re grippy yes but need to break them in over a pack or 2 i hear you get them consistent and not need tightening/tuning as much), redo the drive ratio. (Rn it’s running 86/19 and it’s topping out too quick as the motor has plenty of power and it’s still ice cold after running 5-10 minutes so i know it can be geared more as I’ll swap on a 21 or more aggressively up to a 22 maybe even a 23 and see what happens! It’s very smooth and with I think I filled the diff with 20k and I already love how it feels! Very sure footed and especially super consistent unlike the stock grease filled differential! I’m gonna this spring drop in a fresh 3s LiPo to see what it can really do before and after gearing swap… and gotta tear down the motor a little to make sure bearings are nice and oil them good (all 4 rear wheel bearings were shot and gritty as hell.. Tekno m6 cvd kit and just got only standard Tekno bearings I wish I could’ve looked more to get ceramic bearings but she’s all good now and efficient!).. I’ll keep y’all updated best I can

@tonito6197 2 года назад

How can you do the launch control option

@Jackson-ml1nj Год назад

or Save yourself the 150$ n take a piece of an old Allen wrench that's the same size as the roll pin n drive it in the shaft n make sure it fits the gear. It's hardened steel n doesn't break. Been running mine like that for years with a castle creations system.

@markoftheus 11 месяцев назад

You can also get the upgraded top shaft by itself (part number 9494). $10 isn't too bad.

@kle2217 Год назад

I’ve seen a Slash 2WD VXL TRA58076-4 on websites labeled differently. Is info labeled 272 magnum different from 272R?

@joellofquist2537 Год назад

This would have been cool when I had my 2wd models but the hot racing trans build was enough

@eskimojoe6564 2 года назад

This is cool cuz i can upgrade my stampede and run it on 3s 😂

@brianmcglasson8581 2 года назад

Thought about adding it my 2WD rustler that I switched to 3s VXL motor. Wasn’t sure if I’d see any performance difference

@RobertNES816 2 года назад

It would just be more durable. The oil filled diff would make the truck track a little better depending on how you set it up.

@Gunsforfreedom Год назад

What gearing are you running?

@Lord_Pistachio_Nut 3 дня назад

Is the sealed diff compatable with the stock transmission? Thats all i want lol. The sealed diff

@cwatson42785 2 года назад

Hey Greg what's the name of that track? I'm in RI but would think about making the trip to be able to ride a track I've always watched you run

@macmccartney5760 Год назад

I would just buy a the rustler brushed version for like 180 and take the transition out of it and stick it in my vxl and keep the rest the brushed rustler for spare parts or piece it out and sell them

@markkumollari43 2 года назад

Nice peice, do you know if it was 0 toe like the rpm transmission offers?

@dustinsims3464 2 года назад

Nope. It's set like stock.

@yorkrojas1452 Год назад

Want it. Don't care if i need it

@jeffbryner5355 Год назад

I have a stock transmission with a hot racing gift Is the motor plate And not have to pull the transmission halves apart worth a $140? My heart racing death was only 45 bucks and I can tune it now So I don't see So I don't see Where are those 2 options options would make it worth a $140

@8180634 11 месяцев назад

Is the differential in these any strong than the stocker? We keep breaking differential gears..

@markoftheus 11 месяцев назад

I would say so considering that the drag slash puts a lot more strain on the diff compared to the off-road vehicles.

@8180634 11 месяцев назад

@@markoftheus I think the challenge with off road is when the truck becomes airborne at full throttle, the wheels and motor get to max rpm then when it lands the wheels suddenly slow significantly but all that momentum in the motor sends a shock through the drivetrain. This is what breaks parts I think, more than just strait power. Loosening the slipper clutch helps reduce broken parts, but also gives up power.

@Mr-117 Год назад

Really would like an Aluminum version of this. Anyone know of one?

@Mr-117 Год назад

Able to use stock axles? Could you put larger drag slash axles on as well?

@markoftheus 11 месяцев назад

The stock axles fit just fine. I even have the slash 4x4 rear axles which are bigger than stock and they fit with no issue. If you want to go even bigger yet, I'd suggest getting the rustler 4x4 rear driveshafts (part number 6852A) as these are long enough to work with the rear arms of the rustler, stampede, and slash. The drag slash axles are short b/c they're made to work with the bandit rear arms.

@truerc 2 года назад

Now 2wd vxls will come with this included. Glad I waited. Just another reason not to buy an xl5.

@Rch_P 2 года назад

I figured something was incoming with Traxxas putting all their 2wd models on sale on Amain/hobbytown for the last month

@truerc 2 года назад

@@Rch_P same here

@njdewit 8 месяцев назад

heh, i think the xl5 which is now a frankenstein rustler is probably the most expensive car i have :') including this trans, and a 100 thousand other upgrades

@rworden96 2 года назад

Do you think this transmission is necessary if you’re using bandit vxl with 2s at the most ?

@jamesmacallister2623 Год назад

I stripped 2 teeth off the stock trans middle gear an chewed them up 2s off road ripping seemed ok but once I had to start pitching it for jumps if she landed hard an the wheels weren't spinning it stripped 2 spurs then the trans, I'd say yes it'll need it eventually

@NikkiNexo777 2 года назад

Have you driven a vehicle with actual diff oil in it instead of the black grease? If so, how did it drive?

@markoftheus 11 месяцев назад

I run 5,000 weight oil in my Rustler VXL with the 272R. This keeps the diff action smoother and more consistent from pack to pack. Also, the handling is more predictable while cornering and I can keep the rear end planted more easily.

@laikawuff Год назад

Will this fit in with the RPM rear bumper, and the wheelie bar for the rpm rear bumper

@Idkwhattoname-lw6ne 7 месяцев назад

No you’ll need to get a separate rear bumper to fit the wheelie bar

@nickvledder 2 года назад

It keeps me wondering…. Is Traxxas a brand for modellers that like building and tweaking cars? Or is Tamiya, Kyosho or Teknorc the better option? Arrma maybe?

@ventisette. 2 года назад

Tamiya and Kyosho are definitely the best if you’re not a racer but enjoys building kits. Quite overpriced though. Avoid Traxxas!

@lloydpotts9004 9 месяцев назад

The problem I've had is the ears broke off the trans for the control arm

@TheK20eg Год назад

I noticed the new Rustler 2wd vxl has this trans in it should i get it or get the older model with the old trans? The prices between the 2 rustlers are only $55 🤷🏻‍♂️

@markoftheus 11 месяцев назад

Get the one with the new trans. I have driven rustlers both with the new and the old and I can definitely feel a difference in the handling. Also the motor runs a bit cooler with the newer one.

@TheK20eg 11 месяцев назад

@@markoftheus yeah i ended up getting the one with the new trans this thing is an animal 🔥🔥

@karlfortuin5794 2 года назад

Will that work on the bandit cuz I'm upgrading it to a dragster what do you recommend me getting thanks again for your time sir 👊🏁

@karlfortuin5794 2 года назад

Also I have the 2wd rustler same thing would it work cuz I use my rustler for offroad bashing

@markoftheus 11 месяцев назад

Yes, it works with the bandit.

@markoftheus 11 месяцев назад

@@karlfortuin5794 Yes, it works with the 2wd Rustler too.

@honda116969 Год назад

And if you're not wealthy & do a little bit more labor you can purchase seal diffs for the 272 transmission I think that's what the transmission is called it's 3:00 in the morning so I'm trying and I think they were $30 bucks when I purchase them for my truck... Probably works ALMOST as good as the new $140 transmission at 1/4 the cost, just trying 2 help someone else that is poor like me🤦🏻

@shawnbrown6544 6 месяцев назад

Stamped 2wd or4wd

@richiebledsoe1006 Год назад

The stock diff was the weak link! The planetary gears are garbage! When I pulled the trigger the proline pro 32 was only option! I paid 120.00 haven’t broken it in over 2 years! I was replacing diffs every outing on 3s and 4s! Mip axles and large tires just destroy them stock gears. One would think Traxxas would be a little closer to proline pricing. Crazy the slipper looks same too? You would at least think that would have changed!

@asfbi 2 года назад

can it take 3s upgraded motor

@markoftheus 11 месяцев назад

Yes

@duceclubs5060 2 года назад

I've blown three stock diffs running a castle 1515 in my 2wd slash I'm really hoping this trans fixes that problem

@BillyIdol813 2 года назад

Did you have to modify the stock trans to fit the 1515 castle motor?

@duceclubs5060 2 года назад

@@BillyIdol813 the stock ones it just fits right in

@BillyIdol813 2 года назад

Duce Clubs what pinion and spur are you running? I plan on doing the same thing

@duceclubs5060 2 года назад

@@BillyIdol813 oh I'm sorry miss read no it doesnt fit this transmission

@Miko_of_the_North Год назад

How would you get the bigfoot to turn tighter under high speed?

@BigCountry272 11 месяцев назад

stronger steering servo

@markoftheus 11 месяцев назад

I suggest getting better tires for more grip. The 2wd stampede and bigfoot have a fair bit of understeer with the stock tires. It can also help to slow down a bit before turns to let the front end settle and regain traction.

@bustedaw11 Год назад

Rpm trans and hot racing sealed diff. Get to use optional suspension blocks and tune rear toe to your liking. Way less money

@derricksazrc3411 2 года назад

Ouch that is pricey.

@petehoefs2619 2 года назад

Is the diff compatible with the old case?

@rcdriver 2 года назад

No, the support bearing size is different.

@The_RC_Guru 2 года назад

@@rcdriver he’s right pete. The new diff has a shoulder w a larger bearing making it incompatible. Looks like we need to order new trannies

@michaelgebhard5543 2 года назад

@@rcdriver What about using bearings which fit the new diff into the old case?

@markoftheus 11 месяцев назад

@@michaelgebhard5543 That doesn't work either. The support bearing's are too big for the old case.

@user-ch4md3fp7h 2 года назад

❤❤❤💕💖💝💛

@chelcie3 2 года назад

Will it fit the Raptor?

@markoftheus 11 месяцев назад

Yes. Mechanically, it's identical to the slash.

@TheK20eg Год назад

Is there a way to turn my 4wd Traxxas slash into a 2wd?

@markoftheus 11 месяцев назад

Take the center driveshaft out. Remove the 4 screws holding the rear assembly to the chassis and pull the rear off. Next, pull out the slipper clutch or center diff. Slide the center driveshaft out and reassemble in reverse order. Note: if you have a center diff, fill it with the thickest silicone oil you can find or replace it with a slipper clutch.

@TheUnknown714 2 года назад

I was about to ask does this for the bandit.... and then you said it lol.

@rcdriver 2 года назад

Ta-da! LOL 😂

@jasonbrown6564 Год назад

Well I only see one problem with this and people are going to be putting it on there two-wheel drive stock slash for racing and then they are going to block it

@tylermcneill 5 месяцев назад

What 140$ no way

@shawnbrown6544 6 месяцев назад

I wouldn't buildca drag

@keaginm2791 2 года назад

To be honest it is so over priced, the old one works fine if you set the slipper clutch right.

@NikkiNexo777 2 года назад

TRUTH!

@ventisette. 2 года назад

They should sell the diff on its own, because it really doesn't work fine.

@keaginm2791 2 года назад

@@ventisette. It does for me. I've got 200k diff fluid in it and I'm also running 2.8 paddle tires, haven't had any problems.

@abruptlyblunt 2 года назад

too much money, last year for around $45 i bought a regular 272r tranny pulled from a new vxl for my old xl5 slash, my not be as good as the pro but it wasn't $130......

@NepDouble07 2 года назад

Half the price of a 2wd slash... Yeah, what are they even thinking... Terrible pricing.

@craigknauss9250 5 месяцев назад

No mine doesn't need that not for $80 dollers

@honda116969 Год назад

Yes this transmission is definitely an upgrade 💯%, I like the seal diff I actually purchase sealed diff's for mine already but I like how it can be dropped out of the bottom and the metal motor plate rather than the composite... $140 little steep tho. If it was $85 I'd do it.. thanks Joe Biden 🖕🏼

@gustavoalmeida9488 2 месяца назад

Serve na T-max traxxas 1/10

@King-st9nx 2 года назад

These are extremely defective

@RC_guy667 2 года назад

Why, why! Is everything from traxxas f@$king grey 😂😂😂😂 its annoying sometimes

@kylebeach2316 Год назад

Get spray paint then 🤣

@markoftheus 11 месяцев назад

@@kylebeach2316 I like to use Rit fabric dye for the gray plastic parts. I tried spray painting my parts before and regretted it. In my opinion, dying the parts is easier than painting and more durable since the dye does not scrape off as easily.

@ProperSkill 6 месяцев назад

Dude the traxxas vxl vehicles come with this part from the factory. Take this lame video off.

@rcdriver 6 месяцев назад

Dude, look at the date of the video. It was made when this part came out and WAS NOT available in cars at that time. And there are still tons of old Traxxas cars out there there that don’t have the part. Only lame thing here is your comment.

@midknightmist 2 года назад

Horrible and horrendous!

@78FineSmokey Год назад

Cool but sketchy when you purchased the vxl motor and it got shot 6 months later .. $160 there then this transmission is another $170 you are knocking on $300+ cmon traxxas