Studio Vlog #16 | Small Jewelry Business | How I Make My Jewelry 🎉

Подписаться 24 тыс.

Просмотров 2,9 тыс.

50% 1

I hope you guys enjoy this studio vlog! My week was all lopsided and scattered but I hope that did not come across in the video. lol We got a lot accomplished though and did a good job playing catchup! We wax carved, made molds, cast jewelry and set stones!
I have listed everything that I used in the video down below!
ARBE Dust Collector - pepetools.com/products/jewele...
TouchAmatic Wax Pen - pepetools.com/products/toucha...
Finger Guards - pepetools.com/products/japane...
Engraving Ball Vice - pepetools.com/products/engrav...
Kaya Cast - pepetools.com/collections/fur...
Electro Melt Furnace - pepetools.com/collections/cas...
Arbe Wax Injector - pepetools.com/collections/cas...
Investment Powered - pepetools.com/collections/cas...
Amazon Storefront: www.amazon.com/shop/miteramad...
Amazon Storefront for Silicone Making and Wax Injecting:
www.amazon.com/shop/miteramad...
Silicon Mold From Rio Grande:
www.riogrande.com/product/akr...
Mold Frames from Rio Grande:
www.riogrande.com/product/cas...
Instagram: miteramade?igsh...
TikTok: www.tiktok.com/@miteramade?is.
WEBSITE miteramade.com

Развлечения

Опубликовано:

18 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@thibaudherbert3144 15 дней назад

Your journey inspired me to start carving my first wax ring and your videos on what tools to use for cheap were very helpful !

@MiteraMade 15 дней назад

Aw yay, thank you for sharing that with me and congratulations on your new obsession! 🎉🥰💜🥹 I’ll be updating that video soon on some tools worth upgrading to when the time comes 💜

@jadeheart911 8 дней назад

So cool they sent that to you ! Just found your videos and have been enjoying them all !

@MiteraMade 7 дней назад

It was super super generous and very much valued in regards to my lifespan lol! 🥹💜 I’m glad you’re enjoying them, thank you! 🙏🏻☺️

@dylanhansen378 15 дней назад

I might have to order that extractor I spend a lot of time soldering!!! I mostly do chain but Playing with a ring design you inspired me to try! I love your texture style! I’m playing with an ingot poured into a wood mold for the texture… wish me luck 🍀 really enjoy your work !

@MiteraMade 14 дней назад

Yeeaaaa those solder fumes are no joke! 😭 it definitely can do the job! And thank you so much! 🙏🏻🥹 that sounds like it’s going to come out beautifully and such a unique way to create it!! I would love to see the results when you’re done! 🫢🙏🏻 sending tons of good luck! 🍀🍀

@alicehamran 10 дней назад

Love your videos! Just have to say - you seem so down to earth and really talented! And I def will check out that movie you talked about 😂🙌🏼 Love your vlogs AND jewelry!

@MiteraMade 9 дней назад

Thank you so so much, that means a lot! 🙈☺❤

@_withlove_jewelry 15 дней назад

That Garnet Madrina is 😍😍😍😍 love watching you grow and flourish!! This is winning at life ✨🤩

@MiteraMade 15 дней назад

Thank you so much Vanessa, same to you always!! 🥹💜💜💜

@lonestarcollectiblezcom2602 14 дней назад

Hi Adriana, such amazing looking jewelry that you create! I need to watch more videos on the creation process as I still have so many questions about how you do everything! I'm glad you're getting more safety devices to help with your breathing and lungs and to ensure no bad chemical smells aren't around your work environment! Keep wearing those safety glasses, so your eyes stay 110% out of harms way! All the best and amazing jewelry again! Keep up your hustle, you're going to be rich and famous one day and a CEO of your own giant brand! Thanks, Brian

@THEBRICKSQUAD69 15 дней назад

The garnet set is beautiful!

@MiteraMade 14 дней назад

Thank you 🙏🏻🥹

@pauramos7312 15 дней назад

I really love your videos! You give me a lot of motivation Adriana!

@MiteraMade 15 дней назад

Thank you!! That means a lot! 🥹💜💜💜

@klingelmstr 11 дней назад

Great work! Although i have to say, that i am a bit concerned with the height of the table with the furnace and casting table etc. To me it seems unsave to have things at shoulder height. Were you to drop something your upper body is exposed and that it still has a way to go until it hits the floor. Plus you have less control if you handle at that angle. And please put the fire extinguisher behind you on the floor, so you don't have to reach across the wooden table to get it.

@iiles1 15 дней назад

Awesome video, I've been binge watching and I'm almost ready to get back to my sculpture :) Im making rubber molds from a plasticine sculpture and then I have to find a medium between plaster and cement (all I know is it has a dark base color and the detailed areas are light like a frosted cruller ) to cast my finished pieces in....The first molds I ever made everything went surprisingly well so its disheartening when things go wrong and you have 6 mths work on a pour...:( You and Tom and Isaac should move to South Algonquin in ontario canada if you decide to move again (its between the capital of ontario Toronto and the capital of canada Ottawa...Theres a store/home right down town that would be a cool studio/home ...Bancroft is a northern town vibe away from busy city life I'm between whitney and manooth...

@MiteraMade 15 дней назад

Thank you for watching and wishing your luck on your molds! 🎉 we have never been to that side of Canada but recently went to Banff and the national parks in that area for the first time, one of the most beautiful places I’ve seen. 🥲 I do think though, if we moved again, I’d choose a place a bit warmer lol

@alyona.143 5 дней назад

Love your videos ! always inspiring !

@MiteraMade 5 дней назад

Thank you 🙏🏻🥹

@jamessalisbury3320 15 дней назад

Hi thanks for another great video. When I weigh my wax I calculate it by 10.1 and that gives me an amount that includes a nice button. I started using this when my WiFi was down and needed united precious metals karat/wax calculator 😂 I absolutely love your studio set up. I have everything in a 12x12 ft room and now I’m having to set up in my garden shed for the extra space for equipment. Keep up the good work and the hard work you put into it. I know how much work is needed to put into a simple basic cast. Everything has to be perfect because if it’s not it can have a snowball effect and only ruins the end product. Well done and keep them video coming. 🏴󠁧󠁢󠁷󠁬󠁳󠁿

@MiteraMade 15 дней назад

Thank you so so much! I need to write that down incase I ever need it! 🙈😂 and that’s exciting though upgrading your space! I’ve seen tons of shed Reno’s into studio spaces! 🎉🎉 and thank you for the encouragement 🙏🏻🙏🏻🥹

@jamessalisbury3320 15 дней назад

@@MiteraMade no problem. When I said shed, I should of said a tiny building made out of breeze blocks, that will survive the weather and makes it safe and secure. 🙂🙂 take good care and see you in the next video

@dylanhansen378 15 дней назад

Looking forward to watching after work !!!!

@fionar1656 14 дней назад

Both lots of rings gorgeous!!!! Love watching your vlogs.

@jeannettesalazar6442 15 дней назад

Adriana your flowers will be beautiful. I made 3 wax rings I don’t make the casting. I have to clean. So excited. Thanks ❤😊

@MiteraMade 15 дней назад

Thank you so much!! 🥹🙏🏻 I hope your rings come out nicely!! 💜💜☺️

@jeannettesalazar6442 14 дней назад

@@MiteraMade you are my inspiration

@jamessalisbury3320 15 дней назад

I’ve done that. Schoolboy/girl error and when you’ve 13:05 done it the once, you’ll definitely remember for the next time. 😊 only mine did spew oil 😂

@MiteraMade 15 дней назад

It was a sick feeling for a while 😂 I couldn’t imagine if I saw oil….🫠🙈

@jamessalisbury3320 15 дней назад

@@MiteraMade i really wish I knew a bit more then.😂 in this business, some mistake are worth it. It teaches us little valuable things that we should make sure we take good care of. Keep em coming🙂

@LiilReyy 15 дней назад

I love your work ❤️

@MiteraMade 15 дней назад

Thank you 🙏🏻🥹

@silverbushman 15 дней назад

Looks great ....

@MiteraMade 15 дней назад

Thank you 🙏🏻

@micahsimpson7813 8 дней назад

I love your work! I have been working on building up wax on the same mandrel that you use in your videos but for some reason my rings always break when I try to take them off the mandrel. If you have and ideas of how to have them stick less or not break that would be much appreciated:)

@MiteraMade 7 дней назад

Thank you!! Hmmm, my first thought is maybe your rings are a bit too thin, but I’ve made some pretty thin ones lol. Do you lay down some scotch tape? If not that helps a ton! 🙏🏻 make sure you let the ring fully cool before you pull it off, just a few minutes, and use equal pressure all around 🙏🏻 I hope that helps 🥹

@yvonnemairose6100 13 дней назад

Wonderful video. Can you share where you get your gemstones?

@NestledNook 13 дней назад

Do you mind sharing what camera are you using to film the videos? By The way for wax work, was the machine loud? Thank you for another great video! :)

@MiteraMade 13 дней назад

Thank you! 🙏🏻🥹 I use a canon 90D (the 80D is just as good and a bit cheaper) and the machine wasn’t tool loud at all! Definitely something you can work though without headphones lol 💜

@jeannettesalazar6442 10 дней назад

The rings were good. But I thought that the person who made the casting use the master ( wax ring) to make the rubber molding and use it to do the wax injection to make a series of rings. But they said that they use the master and it was destroyed. Is this true? 😊

@OS-wk6ww 15 дней назад

I got my first piece back from the casters today, is it better to polish before or after setting the stones? 😁

@MiteraMade 14 дней назад

That’s so exciting!!! 🎉🎉 I always sand and polish up to the point of polishing with compounds and then set the stones and then finish it off with the compounds! ☺️ every now and then, after setting the stone, I’ll need to file away and dents or shape up prongs and do a little more sanding around the setting but, I find it just saves me time. Plus I’m always eager to see it a little shiny. 🙈 BUT definitely always polish the inside of your setting as best as you can before setting your stone, it will help it reflect light and sparkle better 🙏🏻

@livesomewhere9432 8 дней назад

Hi Adriana, could you please tell me which kind of graver that you use to remove the extra metal for having a nice and neat bezel setting? Thanks

@MiteraMade 8 дней назад

Of course! It’s a flat graver 💜 I got it from Rio grande 💜

@livesomewhere9432 8 дней назад

@@MiteraMade thanks a lot

@MiteraMade 5 дней назад

Anytime ☺️

@dermotkelly2289 15 дней назад

Great work. I'm new to this. What is the best way to make some money? Hand-made only or castings?

@MiteraMade 15 дней назад

The only difference in the two is the amount your able to produce. 💜 With making molds of the work you’ve already created, you can more likely keep up with any demand.

@dermotkelly2289 15 дней назад

@@MiteraMade Thank you. I shall continue to view your videos.