www.HairByMHE.com get your hair directly from me!! Use code MHE20 to save 20% EBOOK is complete!! Learn it all in order and on your own time. sowl.co/tnOto Starter Kit is available at the website www.myhairexperience.com/shop
Hi Curtis ,I had the chance to watch the video where you test the hair system glue at a swimming pool and i would appreciate a lot if you let me know what brand of glue was it,I saw it worked great for you !thanks in advance!
Hey, Depends on the video. Ive tested a few in the water. One was ghost bond platinum, one was my clear bond called "stick it" and one was with walker ultra hold. Hope that helps !
Hello Curtis...I finally decided to move forward with a Hair System...I went to a local Hairclub and reading reviews and doing alot of research...I have my hair system now for about a week and I am happy however I washed it the other day and used there products as instructed, but now the hair feels matted and sticky...Obviously I did somethin wrong...I have been watching your videos for sometime now and do you have a suggestion as to what I may have done wrong
On your website you mention that 'A typical system costs anywhere from $250 to $2000 USD.' What's the difference between your 300$ system and a 1500$ one?
Tom, send me an email curtis@hairbymhe.com . Send me some photos and let me see if its something we do. Please include your name and reference this. We will get it figured out !
I'm about to wear my first French lace system after wearing 0.03mm poly units for 6 months. Currently I rinse and condition my hair every second day and occasionally use some pomade or a clay for styling. Will this routine be okay for shedding for a French lace unit? I also put ghost mist and argan oil in my hair to keep it healthy, do I need to take extra care not to touch the knots when I do this?
Joshua, really want to check with whoever supplies your products. But I will say heavy oils like argan are not suggested !!! Be careful with styling products too!!
Curtis, from the starter kit I got, do I wash the hair piece off before install to get silicone out? Do you have a video for that? 2. If I use tape on the perimeter and bond on the front (poly 03mm) can I still get it styled and cut without it lifting?
Hey, if you got a unit and starter kit from us, yes sir. That is correct. But if the unit is from someone else, id follow their instructions. I put instructions inside my boxes for my product. Number 2, yes, absolutely.
@@HairExperience Curtis, but I after I washed it, it seems like it's really hard to comb or brush and I'm worried the hair stylist that will do a basic cut will rip the hairs out while forcing to comb. Have a video on this? Please help, I'm desperate, I glued it on my head, it fits and feels great, I love your poly you offer! But again I'm worried hair will pull out as the stylist will comb to scissor cut it
It’s gotta be brush out during or after the drying process. You will want to add some leave in conditioner to it and then slowly comb it out. You welcome to reach out to me directly through the website if you need help. I’m always here for my clients !!
Hey Curtis. Hope you are good. So I have long hair kinda similar to your style in your videos a year ago and I am debating a hair system. I’ve been offered a hair system and for it to be cleaned and styled twice a month by the salon. Is this enough? Also will I need to top it up myself? How likely are they to actually lift up? I go the gym 5 times per week
Hey, every two weeks is a good routine. As for the rest of the info that a variable that is something the salon will do. Sorry, I dont have answers for that part😐
It's night time after using the mhe medium hold pomade. Hold wasn't that good, I put one dime size and then another because it was flopping still.Kinda itching now from build up. So do we rinse off everytime with water only the next day??
Josh, tell me some more info. Could be the wrong product for sure. How long is the hair ? Are you trying something that is a hard hold. Being our mid hold pomade thats all its going to do. It will still be mobile. It doesnt become hard or crunchy. That was something I made sure of and it could be the failure for you. You may need the firm hold pomade. Yes, just rinse the hair with fresh water and do not reuse the product the following day. I personally use that same product and have for months. The total amount used can be the amount of hair specific. I have a lot of hair but only used whats showed in this video Also, I dont want it to move either. So thats why I add the hairspray !!! Here to help!
@@HairExperience it looks like the same length as your hair. My hair is Indian remy hair and its new. So its very luxiourous, smooth and moisturized. Maybe that's why the medium pomade can't hold it. All it did was go over the smooth hair, but no hold. It might be because its new hair. I'll probably have to wait till it finally trains and starts losing some of its sebum. Also im shocked you use a hair dryer on top of the mhe pomade, is that safe for the hair? I noticed once the system loses it moisture for your systems it doesn't want to take any more. This is after like 6 weeks tho. Any suggestions how to revive those hair systems?
@@joshgates2671 hey, 100% correct. I have never found, including my products, to want to hold the hair of a new unit. Thats dang near impossible !! So thats it for sure!!
@@HairExperience i hope so, btw Curtis i noticed you've been wearing stock hair systems. Try a custom, the difference is that the hairs are vented in the back and sides tO fall on them naturally to mix. Also the it keeps the hair in the front in a brushed back look. It makes a world of difference because less products and don't have to really worry about doing the hair in the morning. Just comb mix And go. I use to get customs like that from another company in the beggining. Anyways thank you sir.
Hi Curtis I've had some amazing luck with Redken all soft conditioner. No crazy perfume smell and just leave the hair amazing it's crazy expensive to buy in grocery store $17 for 4 oz!! But Ulta carries it in a 32 oz and has regular sales for 16 .99th I've never enjoyed putting my hands in my hair until now
I ruined my very first hair system by using pomades and waxes. The hair started shedding. I want to try your products, but I'm very nervous and apprehensive.
I would use a Q tip with isopropyl alcohol on it. Lightly wipe it from side to side. Should clean it up. But do not attempt styling right after that. It will loosen the bond until it re dries. Hope that helps !
Hi Curtis, so if I have to use the mhe pomade everyday. Do I just rinse out the next day with only water? Also hows the spray, does make it touchable or hard?
Id just rinse and see how it goes. Its going to be somewhat different from person to person. But the basics should be the same. The hairspray does not feel hard or crunchy.
@@HairExperience ok, hope rinsing too much doesn't effect the hair negatively. I might have to invest in the hair spray now too for the hold. Thank you for the help!
Bruh your hair look incredible !!! shave the sides and it would look like brad pitt in FURY. can i ask when did you first notice you were losing your hair ?
Curtis, dyou have any tips on how to disguise the front line of the poly unit when going for an exposed hairline like yours? It’s only noticeable in certain lights but my eye is always drawn to it. (It may Just be the type of system I have. Will try your poly thin for my next one.)
I've noticed the same thing with mine. I think the salon I went to gave me something thicker than 0.03mm, it's not too bad but I have to style the hair a little differently so it casts a shadow on the edge. I hope the MHE thin skin will be better for me.
Hey, lighting is something that we are looking at personally all the time. I have a product added to our base that dumbs down the plastic shine but stays transparent. Its still not perfect though. It can be a few things here. But the poly (mine at least) doesnt have a shine. The bond however will shine through it in certain conditions. Also when the bond breaks down or its brand new it will shine a little. The bond after about 30 minutes will calm down and no longer shine once the alcohol binder evaporates. But about 5-7 days into my bond it does break down and then shine again. I use a product when this happens called "No Shine" sold at target, put a tiny bit on with a Q tip and it goes away for a day or so. Also a .05 depending on how its made could do this worse. Just depends whats put in the base material to stop it. Hope that helps!
