No video :(

Sub-slab Radon System (pocket83's DIY mitigation)

Подписаться 56 тыс.

Просмотров 122 тыс.

50% 1

Volume, area, gravel, and suction video:
► • Volume as slices of ar...
*****
Approximate costs:
$200. for radon fan, couplers, and manometer
$300. for PVC* and fittings (this was a double-tap system)
$100. for misc. hardware, screws, et cetera (generous estimate)
*Note that (more expensive) schedule 40 PVC was used for sound deadening.
The finished system would probably cost between 1-2 thousand, depending on the location and contractor. But that wouldn't include any of the 'little things' that you get to put into your own projects. I can't accurately prepare you for how much time it will take, since filming a project makes it take much longer. It would've been nice to have a helper, too.
*****
The following two links are to an EXTREMELY HELPFUL website by WPB Enterprises Inc., which has been, to me, (by far) the most useful resource out there:
►www.wpb-radon....
or
►www.wpb-radon....
*****
Next is the "PA's Home Buyer's and Seller's guide to Radon," which is a handy little booklet that was printed by the DEP. Mrs. pocket received one of these at a training seminar, and I can easily recommend reading it:
►www.prc-pa.net/...
*****
And here are some mitigation standards by the PA DER. This will be helpful if you are building your own system; it can help you to avoid making stupid mistakes:
►www.wpb-radon....
*****
Finally, here we have the official radon page of the EPA. You should probably start here (I don't know why I didn't). Remember, the government isn't really trying to secretly kill you, because they need you to fuel the economy! You can also find building codes here for new construction. Trust us-government information is totally credible. Use it. Obey. DO IT NOW, CITIZEN:
►www.epa.gov/radon
That last bit was sarcasm. I feel compelled to say this, because some of you are actually dumb enough to believe that radon really is some sort of conspiratorial hogwash. It isn't. There is a clear correlation between lung cancer and prolonged exposure to high levels of the stuff. Simply put, radon is inert, but it breaks down into some nasty constituent elements that get stuck in your lungs where they can cause nearby cells to mutate. We have a name for mutated cells that start to grow outside of where they are supposed to-cancer. Test for radon.
*****

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 311

@andrettibark 4 года назад

I do this professionally, in my opinion your system is better than one of mine would be. I rarely do 2 taps, (though with super high levels we might) and you used the fan model we call the "fan max". Because it's our second biggest one. (Same model we use though, its a really solid piece of equipment. We see them last 3-7 years, and get a 5 year manufacturer's warranty) your info on slope and condensate is solid. You worked too hard on the foundation core. We get a 5 inch hole (I use a jackhammer drill) remove 10 gallons of material (if you have dirt not gravel you do more material. We dig with a shop vac, a crowbar, and a landscaping knife) and put our pipe in with a closed cell foam rod called backer rod wrapped to hold it in place then seal it with a product much like that self leveling grey stuff you used. No cage, and definately no backfill of gravel, as that reduces airflow a little (though your system has great airflow, that fan normally pulls like a 1.4-1.9 on that monometer. A .5 means you probably replaced a lot more material than I would have removed, so your round rock theory holds water), and would be a pain to keep on the van. Your slab seal was identical, your exit was nicer, we just silicon both sides. The straps you made are called 2 hole pvc straps, and are readily available in galvanized steel or plastic. 1 hole straps are nicer for people securing it to siding not brick, because fans cause vibration and transfer it through the pipe. If you put rubber or foam in the 1 hole straps it helps. You can also just cut the pipe scraps into c shapes, screw it to the wall and then to your pipe stack. Rubber or foam if you screw to anything but brick. Your cedar dowel trick is just diy concrete anchors which are also readily available in plastic for anyone too lazy to make it themselves. All in all, you did a really nice system. You worked a little hard, but less hard than I did my first install, and i had proper training, and better tools.

@kmobthm Год назад

So when inserting the pipe how far past the slab do you go ? And how much material you make way for for the pipe ? Rock or dirt?

@andrettibark Год назад

@@kmobthm about 2 inches past the slab give or take, but it's pretty forgiving and isn't an exact science. You're just looking for airflow. Dirt just means you remove more of it, gravel or rock is just 10 gallons.

@RycckayaMafiya 7 месяцев назад

As a professional maintenance technician and a proud doer of all things possible by hand at 35 years young, this was very professional and thoroughly thought out.

@VampireOnline 4 года назад

Beyond removing the radon from the basement my favorite thing about having it was that it reduced the "basement" smell that was there in my old house.

@dingleberg5816 4 года назад

Everything about this man's household is beautifully over-thought

@pocket83squared 4 года назад

If the desired result has been achieved, then just the right amount of thought has been invested. If the desired result has _not_ been achieved, either more thought is still necessary, or else the thought has been misdirected. In either case, thought is not really one of those things (much like beauty, as it is traditionally conceived), that is expressed in terms of existing as a wasteful surplus, until it becomes that the excess is to the detriment of something peripheral. Crap, my toast just burnt... d'oh!

@shojus 4 года назад

@@pocket83squared Lmao, that was brilliance at its best, until the toast burnt!

@shopart1488 Год назад

We do this professionally everyday. We use a core drill to drill a near perfect hole then remove two to five gallons of stone to make a pit for the gas to collect in. There is no need to build a cage or pee gravel or concrete our fit is tight and caulked. You are correct on the fall of the pipe to shed condensation. At your second connection point use a regular T not a sanitary T sometimes they are hard to find but plumbing supply shops will have them. Clamps are available ready made and rust free we use SS washers and screws. Critters guards are also available ready made. Elbows are not allowed at the top of the stack per code in our state because of wind blow back. Your caulking was right on !! Nice job But if you were a contractor this would be a $6,000 job.

@jasonostler9221 4 года назад

Best video on the subject on RU-vid, thank you for the hours of work you put into RECORDING and EDITING the project, not just installing it. Really appreciate your video!

@HenryCase 4 года назад

Heading straight to the hardware store for supplies to not do this. Thanks for another great one.

@moth.monster 4 года назад

I love these videos, not because I'm going to need to build something JUST like this in the future, but because there's lots of neat little tricks in every step you do.

@moth.monster 4 года назад

Using a lighter to see if there's a leak in a vacuum system? Absolutely crazy. But genius too.

@pocket83squared 4 года назад

HEY! Stop liking this video before watching it! Just kidding. Thanks for the approval. Have a great weekend, and I hope you like this one- it was lots of work.

@maxximumb 4 года назад

I liked this comment before reading it.

@lank_asif 4 года назад

@@maxximumb hahahahahaha!!

@jdniedner 4 года назад

Hearing that your old fan was noisy, I thought of some advice. HVAC being my trade - fans break because of imbalance. Usually caused by lint or other deposits on blades, eventually the cheap bearings crap out from the forces of the imbalance. - I recommend yearly cleaning of the blades of exhaust fans, bathrooms especially as they are moisture high areas, lint sticks to them aplenty. Not sure about a radon fan, I'm sure seasonal moisture is an issue, if it breaks maybe it's worth a look at the condition of the blades. Thanks Pocket for the info-docu-opinio-tainment.

@perotekku 4 года назад

Service electrician here, all the broken fans we replace are filthy. This guy knows his stuff.

@draztiqmeshaz6226 Год назад

I appreciate your standard level of precision. Not too time-consuming,but definitely not sloppy.

@usdpaulp 3 года назад

This video is what made RU-vid great back in the day. Thank you for the great content. Subbed

@SmileCentral 2 года назад

I love how careful and thoughtful you are with your design and build, the pipe cage, the metal pipe "holders" and attaching the box to the block bed joint, I learned a lot watching you! Thanks!

@jamesamber6009 Год назад

Lots of people install it, but I really like you paying attention to details. Great work !

@surreaLinnovatioN 2 месяца назад

I recommend just buying a continuous tester for peace of mind. Great video, I was also curious about multiple intakes because of having a really long basement

@pocket83squared 2 месяца назад

The little blue-liquid gauge _already is_ a continuous tester. Once the system has passed a test or two, as long as the fan continues to draw a vacuum, there are no reasons to suspect loss of functionality. In fact, if peace-of-mind is the goal, _I_ recommend not looking at daily variances, because they can start to drive you batty from overconsideration. Protection in this case is measured over the long-term, so assessments must be statistical. Continuously 'checking in' will cause you to remember all of the one-day spikes and forget the months of zero-values. Take it from a person who already checks his email obsessively: we don't need any more unnecessary reminders or notifications in life. Another thing the Radon 'experts' don't mention is that you can also keep the basement windows cracked during the temperate parts of the year. In my case, that's a further ~30% reduction.

@christianpoynter7971 2 года назад

I was going to hire a contractor to do this until I realized I could do it myself. Your advice *definitely* did not give me any information on how to do this or clear up anything and I will *definitely* go back to hiring a professional.

@garethbaus5471 4 года назад

I remember when my parents were suggesting I move to sleeping in their basement when I was around 14 or 15, my only request was that they first check for radon. Turns out we had radon, the system we had installed looked loosely similar to this.

@simonaldridge4099 4 года назад

That's awfully bright of you to think about radon at that age; so many adult homeowners still don't give any thought to it.

@VampireOnline 4 года назад

I had mine professionally installed and IDK if they did a cage at the bottom, but they only cored a hole the size of the pipe and didn't need to do any concrete. Makes sense to have one. Never thought about it.

@pocket83squared 4 года назад

That's pretty standard. Using a core drill bit that's close enough in size to just caulk around the pipe is typical. As such, they don't need gravel to support new concrete. Core bits are too pricey for a single DIY job, though.

@chvydrptop 4 месяца назад

The only thing I see, and this was after reading the warranty on these fans. You should probably add a condensate trap for the water coming from the roof. Without that the manufacturers don't warranty the fan. I had a system on our place and eventually the fan failed. Whether that was because of the bearings or water, no way to tell. But the fans are pretty pricey. I would get one of the better quality electronic radon sensors so you can check different spots. Great detailed video.

@MattNis1 3 года назад

Everything is very well done. Very clean. The biggest and most important thing you overlooked is a condensation bypass pipe. Your fan will get ruined again by condensation dripping down the pipe through the fan.

@pocket83squared 3 года назад

That was something I spent a considerable amount of time thinking about. Not something overlooked. Consider: it's a high-humidity environment inside of that pipe. It always will be. No amount of condensate pet-cocks will change the fact. Water above the fan will do one of two possible things: either it will become airborne and then exhaust, or else it will overcome the fan and run back through to the gravel. Keeping the fan totally dry would require drying out the water table that's under the foundation. No installation is forever; it's a replaceable part. But it's also worth noting just how powerful an evaporative force continuous circulation is: that's quite a bit of air volume being moved there.

@MattNis1 3 года назад

@@pocket83squared When outside temperatures drop (either in the winter, or cold night temps in warm climates), the humid air from under the foundation will cause considerable condensation in the long run of the pipe that runs Above the fan. Underground temperatures are fairly constantly warm and the ground humidity contributes to the humidification of the air under the slab. Humidity in the pipe will not condensate in the house, but it will condensate when it hits that cold pipe closer to the roof. All of that water will go directly through the fan and back into the ground/gravel under the pipe. This is the #1 reason for failed radon fan. The main pipe should go straight up and down and the radon fan should be installed in a bypass to the side of the main pipe so that the condensation should go straight down. The section of main pipe next to the bypass should be a thinner pipe to prevent circular air flow. Almost all other videos on youtube use this setup and I believe it's important.

@pocket83squared 3 года назад

@@MattNis1 Thanks for the lesson on the water cycle, but am I really striking you as a guy who's in need of one? You're getting on my nerves. It's as though you didn't even read my last response. THE GRAVEL WILL ALWAYS* BE WET. The memes you use suggest that you are a sucker for marketing: "#1 reason for failed radon fan" sounds like the sort of thing that would be printed on the box, but anybody with a modicum of motor experience knows that it's dust-related blade imbalances that kill a fan. Note that I've kept a pair of $10 box-fans running for seven years in a greenhouse. They were even under a mister nozzle! The things were a blob of rust that still purred like kittens when I finally replaced them. Use the additional drain if you like. I remain unconvinced. *Absolute here used for hyperbolic effect.

@smadnym Год назад

WOW! The level of detail, and explanation, and reasoning around every little step in this Video, surpasses any other Home DIY videos I have seen! Thank You for making this great video! and explaining everything! It is actually very useful for me! as I prepare to do some light Radon mitigation! 👍👍👍👍👍👍👍

@mikehunter8691 3 года назад

I’m very impressed. Good job. I like the way you did everything. I’m buying a new home in Connecticut and the radon is 10.6 and we are asking the owner to get it professionally done. I like the house but I want to be safe. But good job with the video.

@pocket83squared 3 года назад

As a Buyer, you may want to instead consider using the fact as leverage for your offer. From the Realtor's point of view, high tests _must_ be mentioned on the Seller Disclosure, so it's a red flag on a house. By sparing the Seller the trouble, you should be able to negotiate well under the cost of a system. 10.6 is low-risk enough to consider delaying the install and/or tackling it as a DIY. Note that this is neither legal nor health advice; this entire comment is unprofessional satire that should be disregarded because I can absorb no liability for your life decisions. Hope you enjoy your new house.

@krissmith2004 10 месяцев назад

Well done perfectionist. Your comments are insightful. Your responses are hilarious and educational.

@dantedenardis1385 3 года назад

Easy to spot a perfectionist. I like this guy

@pocket83squared 3 года назад

I am _not_ a perfectionist. Just trying to make a competent presentation, and do a good job. Also, you would probably not like me. Thanks ;)

@michaelwells1783 Год назад

I like you !!! you use your head and your a born teacher !!! Thanks .

@guitarjoel717 4 года назад

Outstanding video. You do excellent work and I appreciate the way you present information; it really gives a sense of your thoughtfulness in approaching projects. Thank you for documenting this and sharing it!

@bravo959 Год назад

One of the best DYI's I have seen, great job!

@shojus 4 года назад

Good job man! Just bought a house that had a mitigation system professionally installed, so I guess I don't need to do the hard work you did... :)

@markroth5129 6 месяцев назад

Big help, thanks! Went from 55pci to .45pci, really was handy video

@jimrussell5016 4 года назад

One of the best thought out videos that I have seen, on any subject.

@Trainman0401 2 года назад

I thought I was a perfectionist but you beat me any day. Nice work!.

@mikemullenix6956 6 месяцев назад

Good job on everything, including video, if im going to do this i will use your instructions. Thanks

@mikewert141 3 года назад

That's a great install! I appreciate the pride you took in the design and install.

@mleachx1 3 года назад

Omg here i am watching you do this install and come across your cedar plug trick. Never heard of it and can't believe how clever that is

@pocket83squared 3 года назад

Just used it yesterday. Really handy trick. Dad showed me that over 30 years ago for replacing (broken) plastic shutter plugs in brick. Those shutters are probably still there!

@vicever08 3 года назад

Super! It is even better than my professionally installed one.

@krichards8472 3 года назад

excellent, detailed, leaves no question

@joeburrier2273 4 года назад

Much more effort than I would put into the project, but I appreciate the thoughtfulness put into it.

@stant.m4233 3 года назад

In Canada we are advised to leave the testers in place for a minimum of 3 months to get a more accurate reading over a longer time and its is best to do it in winter.

@pocket83squared 3 года назад

Long-term tests will certainly provide you with a more realistic picture of your house's level, but they're also much more expensive. As for the seasonal changes, I'm not so sure; I did get a few higher readings during the cold, but that's anecdotal. There are also tons of variables involved, and things can change. More important than what the level actually is is to act if you have reason to believe that the level is high. What I mean to say is that, well, whether your level reads x or 10x, when your slab is at a negative pressure, it's deflecting radon all the same.

@ma7rix13 4 года назад

Very cool video. One radon dude said the switch needs to be on the exterior if you mount the fan outside. My fan has one pipe in the floor and one in the wall I assume to pull from the blocking.

@hyuxion 2 года назад

Thanks for this great video, now I have better knowledge on my Radon system, glad I dont have to install myself! I am a DIYer but this is beyond my capabilities.

@bluhuptie 8 дней назад

Another great point! 24:43

@ranger178 16 дней назад

interesting ideas and techniques

@jsf11fra 3 года назад

Just a comment. SOME PLACES (not all) have code that requires a switch by the fan on the outside of the house. If you are DIY you might check before you do this so you do not fail an inspection down the road. This looks like it was probably built better than the average "pros". Good job. One question I would have is how to spec a fan size for the house. Other than that it all seems rather easy.

@pocket83squared 3 года назад

The RP145 is kind of the standard, most commonly used fan for a general application. Using that as a basis for comparison, its specs exceed what are necessary for most houses that use only a single tap. The fan used here was slightly larger because of the second tap. Also worth considering is the number of elbows in your system, since the extra turbulence can restrict flow. Sorry I can't give you a better answer, but every installation will have its own personality, so it would be hard to match a fan to a particular job without considering all of the weird variables. At least it's easy to tell if it's working once it has been installed; as long as your fan is drawing enough to cause a negative pressure, you're in business. Thanks. As for "pros," no thanks: I've known enough of them to keep them away from my own house!

@bluhuptie 8 дней назад

Placeholder pipe 19:51 genius!

@michalsterling Год назад

I'm planning to do it my self after buying a continuous monitoring device. My readings cross 4 every few days. Your video is very helpful. No one commented on the "Dunning-Kruger effect" frame you inserted after your clamps turned out too short? Thanks for your video.

@MatthewCuba 4 года назад

I appreciate your attention to detail and explanation. It has certainly given me some things to think about for my own installation. Well done!

@johnguidry4065 4 года назад

This type of project is really cool

@pocket83squared 4 года назад

Thank you!

@silphy2677 4 года назад

Very instructive satire. Love the details of a joke!

@pocket83squared 4 года назад

Jon Stewart used to use that exact same evasion. Beats responsibility.

@euartista 4 года назад

6 years ago, I spent $1000 for professional installation including materials. $500 above what you spent on materials. But I did not have time then or else I would love to save those 500 bucks. Great step by step! Just a note, for mine the contractor taped on the existing sunk pump.

@radonninjas9087 4 года назад

An experienced contractor is worth every penny. Typically an installer guarantees their product. We warranty our fans for 5 years and and the rest of the system has a lifetime warranty. Also we do installations way more efficiently than this. Less intrusive holes through the slab and knowing what materials to use instead of having to fabricate something onsite, like in this video, can save countless hours and allow contractors to be in and out of your home in about 2 hours instead of all day. Just something to consider when deciding between DIY and hiring a company.

@pocket83squared 4 года назад

Something else to consider: this is _my_ channel, and I won't permit you to continue spamming it with unfounded dismissive criticism. I'd wager my work quality against your "way more efficiently" done two-hour job any day. I *am* an experienced contractor. Now unless you see an actual problem with my system, scram. Go caulk around those gaping holes you leave in vinyl siding. lol.

@radonninjas9087 4 года назад

Spamming? I made one comment on another comment on this video posting information. I wasn’t criticizing your work but unless you’ve installed radon mitigation systems for over 5 years in several areas of the country, I’d guarantee that you couldn’t do it as watertight and efficiently as someone who has. I was merely commenting that professional contractors that do this everyday and guarantee their work are worth the money. Take it how you want.

@pocket83squared 4 года назад

Fine: I'll take it as an empty guarantee. There is no possible way that a comparable system could be built in two labor hours. Every single joint was carefully primed and fitted, and a pair of hasty hourly grunts would do no such job. I'm sure you guys do nice enough work, but be honest: there's no comparison. You might _believe_ experience to be the same thing as excellence, but it is not. So please, go market elsewhere. Of course, you could also release a relevant video about your work, so that we might take a look at it! *Show us what you do around vinyl siding.*

@radonninjas9087 4 года назад

I’ll work on making a video but in the meantime this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-96K4Lke0H8Q.html shows a similar method with a few modifications. We use escutcheon rings around the pipe when it exits and mount a coupling in the rim joist so that the basement guy can work off the inside while the outside guy works off the outside. To seal around the pipe itself, we use a 50-year polyurethane sealer that doesn’t harden fully and flexes with freezing and thawing. We also take steps to ensure no water will be sucked up into pipe during heavy rains or should a pipe burst in the basement. We use plumbers putty / electrical putty behind the outdoor switch box and around and the romex connector to seal any gaps between box and home. We seal up the sump pump with our own lexan sump covers, as well as any cracks & weep walls near suction point(s). I’ll make a video and tag you in it this winter if we slow down.

@yoshmarklund 4 года назад

Love your disclaimer

@joseph78e4n6 2 месяца назад

thank U good video .. I have a crawl space ..

@bigjeep2195 Год назад

GREAT video... THANKS

@homunkoloss6782 4 года назад

ive never tried using zeder wood or any other wood if i wanted to screw something into my wall. i always used these plastic ones ( sry i dont know the english name for it ) and i would mortar as well. but maybe next time ill try it with the wood :D - Thanks for the new ideas

@llapmsp 2 года назад

Very professional install. Thanks for sharing.

@D.H.W123 7 месяцев назад

Your did wonderful job thumbs up

@homunkoloss6782 4 года назад

yes. I am looking forward to that next video!

@Macky4941 Год назад

We're currently looking at a house that was tested for radon, the highest point was 3.6 in the basement so it's considered "safe". I think I'll take the time to install somthing similar just for extra layer of safety as you've shown it's not a hard job for the average handyman.

@scottrabinow2773 7 месяцев назад

Good idea! My house tested last year at 3.8, and further reading online informed me that levels vary with seasons, precipitation and other factors. So, I bought an indoor air quality (IAQ) monitor and in the last 8 months the reading has varied from 1.6 to over 10. So, I'm looking at installing an active mitigation system as well.

@Wordsnwood 4 года назад

came to the comments for the "this project sucks" jokes.... guess I'm early. +1 for angry wasps content.

@pocket83squared 4 года назад

Ok, so every video is going to have a sort of theme to the commenting as views increase, and that theme is *really* revealed by the time a video gets to 100K views. By a million, it's just _ad absurdum._ With 32 minutes of content, it's just too hard to predict what it would be. It could be a 'suck' cliché, but that's probably too Dad joke; the point-to-the-obvious demographic usually falls a bit more to the crude side of the humor spectrum. But I'm pretty good at avoiding some of the more tiresome pitfalls by now-like presenting anything even remotely phallic or vaginal. Nevertheless, there will be TONS of reactions to the hidden frame in this one, if it can actually break 5K views. Burying .15 sec under 32 minutes of rubble reduces the tedium dramatically, though. Sorry: I tend to ramble in my replies to you. Hope all's well ;)

@Wordsnwood 4 года назад

@@pocket83squared All is pretty well. Rambling replies welcome. Sometimes I comment just to let people know I'm watching. :-)

@Wordsnwood 4 года назад

BTW, found the frame, but did not catch the reference, and just moved along. I guess it's a movie/video I haven't seen. Now I need to scrub through 32 minutes to try and find it again and puzzle it out more! :-D

@stevechristian5257 6 месяцев назад

Good work

@RetiredAtenPilot 3 года назад

Wow, great craftsmanship along with very informative video , Thank you !!

@SeeEssPerez Год назад

Good detailed video. Thanks for sharing.

@englishbars 3 года назад

you are a great teacher....and quality of work!

@karenhowell7850 3 года назад

Nice video. In my area you must have an exterior weatherproof disconnect box for the electrical connection.

@utubeastro2299 4 года назад

Fantastic video! Everything I needed to know to tackle this diy project, and plenty of useful tips thrown in as well. Five stars!

@Vishalforu Год назад

amazing information. You have done an awesome job.

@jk1314 4 года назад

I take the waterproof electrical connection idea for my future exterior home instalations, Thank you pocket. Btw, I have never heard of radon...will google it after this video.

@jk1314 4 года назад

ps: how do you do with the radon in your water? extra ps: do you think that large scale use of fracking had a large impact in the volume of radon that goes to US homes?

@pocket83squared 4 года назад

I can't answer the second question. I have no idea. There are water tests, but the bulk of the radon release happens during hot showers, so I was thinking about running another standard test in our upstairs bath.

@russell2449 3 года назад

Just what I needed as I was looking for a good DIY and instead found a GREAT DIY video, thanks for doing the work in making this ;?)

@vladimirgoryunov5300 2 года назад

Самый полный видос по установке системы. Спасибо!

@anthonydeloach805 Год назад

outstanding explanation

@laelsperspective 2 месяца назад

Good stuff man. Ty

@csell871 Год назад

Thanks

@lukasstrong772 3 года назад

Damn excellent video, appreciate your method and advise

@fengtaowang5348 4 года назад

Top notch DIYer

@JLtreehouse 5 месяцев назад

Perfect! only thing.. your screws/thread barrels on hose clamps should face to the other side so not visible :D

@pocket83squared 5 месяцев назад

Why? Then you can't access them. And who's judging? It's on the backside of a chimney! Thanks.

@geoffreyjohnson3626 Год назад

Impressive work, bravo!

@artgirl-zx2jh Месяц назад

Great video and explanation!! Where did you buy your bird and squirrel top cap? Need to keep our critters out of the pipe.

@ahunt 2 года назад

I like how he painted the wall so he didn't have to paint around the pipe later

@donreinholz8121 3 года назад

Very thorough video. I can see you have a lot of tools and you take your time figuring out the best way to do a certain job. Great job!

@pcbuilderlover4271 3 года назад

Thanks for the video! The only thing you may want to add to save the fan's longevity is to add a RadonAway Fan Guard Kit (76040-1) Condensation Bypass 3 Inch or 4"

@pocket83squared 3 года назад

I do not recommend using a condensate tube or pet-cock. It is my belief that they are unnecessary additional expenses. It's just another product to sell you. Consider: it's a high-humidity environment inside of that pipe. It may always be, depending on your house's groundwater table; you will not be able to change the fact. Water above the fan will do one of two possible things: either it will become airborne and then exhaust, or else it will overcome the fan and run back through to the gravel. Keeping the fan totally dry would require drying out the entire water table that's under the foundation. Remember, no installation is forever, so a fan is a replaceable part. You will not slow its rust process by reducing surplus water from a 100% humidity environment. But it's also worth noting just how powerful an evaporative force continuous air circulation is: that's quite a bit of air volume being moved there, so the fan itself is its own best defense against moisture.

@itsmattmp 2 года назад

The bracket you made for the vertical attachment is generally available as a bracket at Lowes in the electrical conduit section. Perhaps for your pipe size you may need to order from a commercial electric supply company. Yours is certainly nicer, but Lowes would be easier. I know Ive bought a 2" at Lowes - not sure if they carry the 3" or 4".

@VampireOnline 4 года назад

Thanks for posting the cost in your description. You saved $200 on what I spent to have a local company install it.

@pocket83squared 4 года назад

Whoa, don't do that. You're telling me that it wasn't worth it. I've known too many contractors, specialists, professionals, and experts to let any of their ilk work on my personal house. The devil is in the details: as in the stripped screws you aren't aware of, the crooked pipe, and the fittings that weren't primed. Did you get a bird-cage? How about a flashed vinyl siding block? Further, that was a really conservative estimate that included a double-tap, a larger fan, all the shipping, and even taxes. You get what you pay for, so don't feel so secure in what you've "saved."

@VampireOnline 4 года назад

pocket83² I’m not saying it wasn’t worth it. I was just commenting on the price difference based on your numbers as most channels don’t post numbers. I had a very simple install with no electrical work needed as the fan is in my garage and plugs in right next to the garage door opener. So no siding to disturb. No birdcage either as the pipe is straight up and has no bend. I did ask about that when they installed and it’s like as it can frost over during winter and birds wouldn’t nest there due to the constant stream of air making nest building impossible.

@pocket83squared 4 года назад

Where I live, I think a chipmunk would be the most likely thing to fall in. We have tons of them around the house.

@radonninjas9087 4 года назад

I don’t know if it has to do with animals being able to “sense” radon gas or if it’s the constant airflow but I’ve only had one instance of an animal in the pipe and that was a squirrel and the power was shut off to the home for 4 months , so the system wasn’t running when the squirrel probably bedded down in there.

@bkoz319 4 года назад

really nice install

@drportland8823 4 года назад

I'm suddenly realizing what a crappy job I did on my last home repair. I mean, I already knew it was crappy, but the number of things I did not consider before starting the bodging is growing as I look back.

@pocket83squared 4 года назад

Look on the bright side: at least you didn't make a how-to video about it. Imagine the best and brightest bodgers badgering you with a barrage of banter 'bout how badly you bodge.

@drportland8823 4 года назад

@@pocket83squared I know just enough to be able to watch the video and say to myself, "oh, look, there is how someone who knows what they are doing thinks about the problem." The next level of comment above that I'd probably be looking for spelling errors rather than understanding what they were getting at..

@ncooty Год назад

Very impressive. You might consider painting the PVC to limit its photodegradation.

@billsherman6129 13 дней назад

On the electric, maybe a slightly bigger drip loop would be helpful? And ... are there right-angle connectors so that the power coming out of the fan wouldn't be as noticable?

@pocket83squared 13 дней назад

Drip loops cause a sealed trap for condensation. The conduit has a piece of scrap pipe snapped onto it near the bottom, and this breaks away a water stream before it can touch the siding box. As for noticing the electric line, it's sort of a non-problem to me: especially compared to the big, ugly fan and pipe system that it's attached to.

@matthewlewellen5219 3 года назад

If your fan is mounted outside does your code require you have an electric disconnect located outdoors also? Nice set up dude. Only thing I could find to nit pick are 1, your Romex needs to be protected or supported while exiting the home. 2, what are the fla for that fan? Does that light switch support the load rating? That fan circuit needs to be gfci/afci protected. Probably should have used single conductors and transferred from emt to seal tight and kept going, while you can run romex in conduit I think you might be pushing the conduit fill limit. Awesome clamps.

@pocket83squared 3 года назад

And _how_ would you attach the conduit, then? Along the pipe? By tripling the amount of external wiring and then adding redundant fasteners to everything? Or: how's about we mount a nice, ugly bracket to my house? No. The flex conduit is already extremely sturdy; the short curve gives it enough rigidity that I would probably have trouble yanking it out using both hands. It can barely be bent to the radius that it's at! As for the rest of those nits, they're not very relevant to the topic of this video. You seem to be implying that a simple electrical fan will cause jacketed 12-gauge wiring to overheat, which is a stretch. Do what you think is best on your own project (following as much reading up on the subject as you can tolerate), but be careful about giving petty 'code' too much leverage against your overall decision-making process. Not that you shouldn't consider them, especially around an unfamiliar topic, but often such standards are designed to prevent the unthinking from harming themselves. Thus, if you're thinking, you may just be able to avoid harming yourself without the extra assistance. Oh yeah--but all of this was DIY satire anyhow, so be sure to follow all local laws, customs, and regulatory advice. ESPECIALLY if you've been hired to do this job! ALWAYS hire a certified whatever for whatever, and be sure to ask your doctor about radon.

@perotekku 4 года назад

Really love the ingenuity for the PVC straps, as an electrician the whole time I'm thinking "cobra clips" haha! Nothing replaces doing it yourself though!

@radonninjas9087 4 года назад

DSHPerotecH I was think why not but 2-hole straps from Home Depot? Almost exactly what he made but way less effort and material cost.

@pocket83squared 4 года назад

The closest option available to me was bulky, junky, and three times the price of aluminum bar stock. Also note the "DIY" in the title.

@giulius7176 2 года назад

Very helpful……thanks for sharing!!

@davidmclean9808 4 года назад

I have been installing radon mitigaton systems for 33 years, this person has just a little ideal about how radon mitigaton works. He needs to have his chimney properly flashed.

@pocket83squared 4 года назад

You have one chance to not have that comment removed: tell me what I did incorrectly. And the chimney has nothing to do with this video. It has been flashed since.

@stevesith6974 3 года назад

Great DIY job

@simonaldridge4099 4 года назад

Very well done.

@kunnathor Год назад

Thanks for your great video!

@pocket83squared Год назад

Glad you liked it.

@boristzvetkov4419 4 года назад

Thumbs up for the great disclaimer!

@rynely1 Год назад

Well done!!

@gschnaper 4 года назад

Excellent video! Thanks!

@DaveScurlock 4 года назад

My immediate response to this video was to give it a thumbs up for its entertainment value, but to consider its detail irrelevant for my current life. Turns out I live in an area where higher levels of radon are considered more likely according to a map produced by the UK Government (www.ukradon.org/information/ukmaps); never knew! So thanks for highlighting something I should be aware of; it's not a topic that gets much if any attention in the UK.

@mike93lx 4 года назад

Great job and thanks for the detail. Romex shouldnt be outside as it is not wet rated. Conduit end to end with thwn is best.

@muchmuchmore 3 года назад

As far as I know, Romex isn't rated for being in conduit wet or dry, inside or out.

@mike93lx 3 года назад

@@muchmuchmore that is untrue and a common misconception. Romex can be in conduit, indoors, in a dry environment. Romex cannot be used outdoors, regardless of protection