I'm glad you called them incandescent bulbs instead of halogen. Lots of people think all glass bulbs are halogen filled. Nice video. An easier way is to peel back the plastic fender liners on each side in the wheel wells. But there's many ways to accomplish the same goal. 😁
Amazon Link to the LED bulbs - amzn.to/34Am67O 00:00 - LED Light Bulb Type 00:37 - Right Side - Remove Air Filter Housing 01:55 - Location of 2 Bulbs 03:20 - Left Side - Remove Battery
All you had to do before disassembling half the vehicle was to take off the black side upper plastic like fender that have 2 clips on. This way you can stick your hand from the side and have better access to those pain in the a$$ light bulbs. The other trick is to move your wheels (right or left depending which light bulb side you are working first) inwards. Remove the wheel well plastic cover with the 2 clips off, move outwards part of the fender and stick your hand for better access. Same procedure goes to the other side.
Lower one is a twist. The upper is double clipped, then a twist. The clip is difficult. I used a 90 degree clip up get the back side. Then destroyed the clip on purpose. The twist function is all you need.
He skips the hard part, releasing the retaining clips on the upper bulbs. I used a 90 degree pick to release the clip on the back side of the bulb. I recommend destroying the clip afterward. They serve no purpose as the bulb is twist fastened in place.
You didnt explain how you got the bulb out if its a button or twist or pull straight off cause that info is vital knowing it could cause damage doing it the wrong way