Subaru Power Steering - Noises and Common Concerns

Подписаться 384 тыс.

Просмотров 188 тыс.

50% 1

Please Like, Comment, and Share. Be sure to subscribe for future videos. Don't forget to hit the bell icon for notifications. RU-vid has changed what they show subscribers!
1994-1999 Subaru Legacy Power Steering Pump Seal Kit - amzn.to/2Tp895Q
2000-2004 Outback and Legacy
2003-2006 BAJA Power Steering Pump Seal Kit - amzn.to/2GsIcgb
2000-2004 Outback 3.0L Suction Hose - amzn.to/3eqfKIk
2000-2006 Subaru Legacy Outback Baja P/S Suction Hose - amzn.to/2TU5s9Z
2003-2008 Subaru Forester Power Steering Suction Hose - amzn.to/369ojUt
2004-2007 Subaru Impreza Power Steering Suction Hose - amzn.to/2JCwTU2
Subaru Specialty Tools - www.amazon.com/shop/mrsubaru1...
Subaru Head Gasket Essentials - www.amazon.com/shop/mrsubaru1...
Subaru Timing Belt Essentials - www.amazon.com/shop/mrsubaru1...
StoreFront - www.amazon.com/shop/mrsubaru1387
If you like the vids and want to help make more: paypal.me/MrSubaru1387
----I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not myself.----

Авто/Мото

Опубликовано:

4 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 259

@Dodger-2525 8 месяцев назад

That just saved me a bunch of money. I was about to order a replacement pump. I got about 2 mins into the video and realized my issue wasn't the pump, but the $1 O ring. Took longer to go to the parts store and back then to replace the O ring. My power steering pump went from a screaming banshee to quiet as a mouse. I can even parallel park again. Thanks for the help.

@betterffd 3 года назад

Thanks for the info, that noise has been pretty embarrassing lately. Nice beard btw.

@dirkgatsby 3 года назад

Great timing! I had just noticed an increase in PS noise as our weather tuned a lot colder. I had watched your earlier video on this topic and at that time rushed out and bought the O-ring and return hose - now would be a good time to install them :)

@garretjuliano9701 3 года назад

HERO! I was literally about to purchase a power steering pump and went to check around one last time to make sure I'd be able to replace it myself when I came across your channel!

@samuelcooke1412 3 года назад

I also had constantly noisy/juddery power steering. Tried the o ring replacement, multiple fluid flushes and hours of sitting there going lock to lock trying to bleed air from the system. I finally found a fix for it. The stock spring clamps that attach the hose from the resovoir to the pump somehow were letting air into the system. It didn't show any signs of leaking but if I turned the wheel fast enough it was able to pull air in from those shitty spring clamps. I replaced all the spring clamps with some nice worm/gear clamps and was able to snug those up alot tighter than those spring clamps could ever dream of. After I replaced all those, I did another flush and bleed sequence and after a few days of driving and engine heat cycles it's completely back to normal. No noises, juddering or headaches 😁 steering felt brand new and light as a feather.

@snowrocket 3 года назад

On my '07 Impreza 2.5i, I had the juddering, mostly when turning right. I too used screw/worm gear (heater hose) clamps to replace the original factory clamps. Even with the wheels off of the ground, it took a LONG time to get all of the air out of the system. Once I did, it was quiet, smooth, and linear.

@samuelcooke1412 3 года назад

@@snowrocket awesome!

@zannyZ06 3 года назад

@@snowrocket how did you take the air out of the system ? Did you flush/ bleed the system with the pump/vacuum while the car was on ? Or could you explain how did you do it? Thanks in advance.

@snowrocket 3 года назад

@@zannyZ06 I had the front of the '07 Impreza off of the ground on jack stands. I removed the bad power steering pump and the intake snorkel that goes right over top of the pump. I turned the steering back and forth several times, engine off, to attempt to purge the old fluid out of the system. I tried to pour and pump some PS fluid into the newer pump through it's suction side by turning it by hand. Then, I put on the good junkyard pump and reconnected the hoses. Filled the reservoir 3/4 of the way. Started the car, letting it idle, and slowly turned the steering back and forth. I would take roughly 30 seconds to go from full left to full right, 30 seconds to go back. The pump was LOUD, like "this is a bad pump!" loud! I would turn off the engine and add fluid about every minute. After about 15-20 minutes of this, all of the noise and goofiness of the steering was gone. I MAYBE had to add some fluid a day later, then it was completely fine. No noise, no leaks, no juddering. It's a stupid design. They should have just kept with the old PS pump that had the metal reservoir on top of the pump, and mounted the whole pump lower. Having the reservoir LOWER than the entire pump, especially without really good hose fittings on the suction side of the pump, is bad engineering practice. This reinforces my opinion that Subaru is run half by idiots and half by brilliant people.

@zannyZ06 3 года назад

I see ! Thank you for the explanation! I’m about to change the PS in my 08 Legacy, I’ll keep it in mind.

@boro240sx 3 года назад

Love the help you give man. You've kept my WRX going.

@timschultz7755 Год назад

Thanks for the help, this made diagnosing and fixing it easy. I had several leaks, on the rack, on the lines, at the suction hose, and the pump. Had to replace it all but it now has great steering. Used a junkyard rack so it wasn't too costly. The o-ring was backordered at Subaru, so I got it off Amazon.

@erikdenzer6860 2 года назад

Thanks for this my dude, cost me $40 and about 30 mins of my time and that squeal is gone. Keep up the good work.

@gladiatormaximus4913 2 года назад

Don’t we have to change the power steering fluid when we change the O-ring in the steering pump?

@XX-kz4zg Год назад

@@gladiatormaximus4913 bleed it

@adamdistortion8810 Год назад

@Gladiator Maximus u dont have to, but you should try to keep it clean, change it every once in a while

@juanluisfernandezfolgueira7700 7 месяцев назад

Donde compras la junta tórica?

@troyfankell6581 3 года назад

The o-ring and hose are 90% of the problem cars I have seen on H6 and turbo cars. The older pumps are super easy to rebuild with Subaru's kit and also getting bearing as well. I am in process of rebuilding the pump on my '05 GT. trying to find the shaft seal made by NGK. I also used the opportunity to upgrade the o-rings to Viton.

@luketrochinski3954 3 года назад

Excellent articulation of diagnosis and resolution.

@jmur3040 3 года назад

Definitely looking into this, my neighbors will appreciate the quieter starts on winter mornings I'm sure.

@javierr3515 3 года назад

I had the exact problem in my 2011 Impreza. The guy at the subaru dealer made the exact noise with his voice!! He knew what he was talking about!! 😂😂

@BadJo0Jo0 3 года назад

Just want to thank you for your videos. I just got a 04 Forester XT with 273k miles that seems to be decently taken care of by the previous family that had owned it since 30k miles. I'm really excited to help it live as long as it can past 300k miles. So again, thank you for your videos and knowledge. They are invaluable in my journey with my new to me Forester XT.

@tylerhall9412 Год назад

I just got an 07 Forester xs and I wish it was an xt. they're har to find in the northern us. My xs has 322,000 miles and runs fine and is inspected, needs a lot of love put into it but it blows my mind how well this car still runs. bet both of these make it to 500k

@muayboran4life Год назад

My dad has a 2005 XT with 160k miles which is in amazing condition. People try to buy it off of him all the time but I have told him not to even think about it. I found it for him 6-7 years ago when it only had 88k miles. It has this ps whine and a local shop quoted us $900 for the R&R of PS pump but I am glad I found this video. I am gonna give it a try and hopefully it fixes it.

@fenzco2139 7 месяцев назад

Update please!😊

@BadJo0Jo0 7 месяцев назад

@@fenzco2139 New short block, rebuilt heads. Forester Swift Springs, KYB struts. STI LCA, STI Trailing Arms, Group N bushings all the way around. STI Steering rack. VA STI Intercooler, ID 1050x, AEM fuel pump, Cobb catted DP, HCFI VF48. making 260WHP/300FtLb 4EAT, sads. But it's a fun daily

@Fatboy53 3 года назад

Thanks. Outstanding video. 12/6 I changed the o-ring and hose then bled it. Spent 2 days bleeding it. Day 3 took apart I broke the first o-ring. I’m so dumb. Went back to Subie bought their last 2 o-rings. Bled. Voila. No more noise. Guys like you help guys like me save $$ I’m on a tight budget thanks so much.

@josephortiz7726 2 года назад

Is there a difference in o rings Oem to auto parts stores ?

@Kingghoost 3 года назад

talking about winterization short sleeved hehe. love it! snowing already here in the european mountains. content great as always, also covering the different variations of the reservoir, no questions left open. btw: serious winterization takes me a whole workday a year so i guess its a real thing in some areas (mostly because of rustprotection)

@ScandinavianCarsNH 3 года назад

I actually ordered that hose for my 02 Outback last week and I'm replacing it tomorrow. What a coincidence haha

@hectorsanchez4373 Год назад

Thank you for this awesome video Mr. Subaru. Just last night my PW Steering started making this Loud noise and by watching this video, I can now address it and fix It. Thank you again! 🙏🏽

@andyjdm5607 3 года назад

First time subaru owner and thanks to this video i'm understanding more my car and how to do replacements right.

@TheRipePunani 3 года назад

I just went through this with my Baja Turbo. Bought a brand new OE pump for over $400 after the remanufactured unit the previous owner had installed decided to take a ATF dump through the pump shaft front seal. Not fun fixing a bad PO's neglect. My Subaru specialist told me the same thing about the lack of a OE rebuild kit for the pumps the H6 and turbo 4s use. Apparently remanufactured ones are rebuilt with off the shelf o-rings, gaskets and seals so the longevity and reliability is a crap shoot. I found this out the hard way unfortunately but it is what it is.

@ChasePhilport 3 года назад

Zero dislikes so far. Love the positivity. Thanks so much for you videos, doing my ej253 timing belt for the first time. AISIN kit, heard gates went to crap. Wish me luck!!!

@determineddad7935 3 года назад

Hope it went well. If you haven't take your time and get the specialty tool

@ChasePhilport 3 года назад

@@determineddad7935 Yep went well. I definitely had the proper tools :) I bought a knockoff company23 harmonic balancer tool.

@sugarbooty 2 года назад

Zero dislikes in 2022 :D

@acela30th 3 года назад

Amazing detail and problem solving skills. Yes!

@Ccam1190 Год назад

Thank you for this video. I just replaced the entire rack and pinion as well as the pump itself on my 05 H4 NA. I have pulled a vacuum on the system and it holds about 20 bar with no drops, so there doesn't appear to be a leak but the brand new pump (Lares) is pretty noisy after several attempts to air bleed the system. It does go away once the system reaches temperature and I did replace the O-ring with the new pump, but not that suction hose. The high pressure hoses that route down to the rack and pinion are also brand new. I will give this a look when we get home. Thank you again

@themechanic4222 3 года назад

Sir by watching this video I solved a mastery of my bitting or grinding steering pump on my 01!outback .It was difficult to turn and made noise but not too much . I sprayed the return Knokke bolt with FLEX SEAL TWICE . Now like butter 🧈. That mean I was sucking air all this time . Thank you 🙏

@xo4262 3 года назад

Great video man! Thanks for the help, hopefully on your 04 wrx I can fix this now!

@ZaWyvern 3 года назад

Perfect timing... I live in the mountains... it's about to snow. Good timing,

@MrTime2525 3 года назад

Appreciate the videos as I have a 2009 Subaru Legacy 2.5i Limited. Been goin through all your videos🙌

@adamalbers6489 Год назад

@MrTime2525 What are the part numbers for the 2009 model? I have an '09 outback and he didn't list the part for that model year in the video description. Thanks!

@emanuelborja3902 2 года назад

Thought I was going to have to replace my PS pump, and turns out I just gotta spend a couple of bucks, you earned my subscribe today 👍🏽

@davidallen.5829 2 года назад

Thanks a bunch. I had replaced my pump w a new one because my old one would make a whining noise until it warmed up; Thought it was going bad. The new one was louder than the old one, and my steering was worse. Thanks to this video I checked o-ring. Flat and cracked it was! Replaced with one out of an ac assortment I had.....problem solved.....quiet and steers like new.

@javierr3515 3 года назад

The steering rack is another problem with leakings. I had a problem with that too after going to “have some fun” at the beach with the awd. I have to repair it at the dealer. Greetings from Argentina.

@patonbike 3 года назад

After removing engine, I got a nasty whine from my PS pump when I finally got it all back together. What I think happened is the strain that was put on the hose/pump when it was hanging off to the side to get motor out finally did the 17 year old O-ring in. Really hoping this will be the quick $6 fix! I ordered a 100 pack of O-rings for $3 and an OEM one for $3... whichever arrives first will probably get installed!

@andirada8710 2 года назад

Thanks for posting the Subaru kit...

@SquanchYou 2 года назад

Eeeexactly what I was looking for, thanks very much!

@minaelia88 3 года назад

Great video as always. Does this power steering kit fit a 2009 forester with 2.5 engine naturally aspirated ej253 ?

@earfman7527 3 года назад

Great video, I noticed on my 2011 Subaru Impreza when I start the vehicle on cold mornings the steering wheel is hard to turn. (My vehicle is does have a manual transmission) Also when I turn the steering wheel all the way to the right or left I can hear a whining noise coming from the power steering pump. The hose coming from the power steering pump itself is hard as a rock. Thanks again

@Toolaholic7 3 года назад

Have replaced a rack and pinion in a Subaru twice,first replacement was a vision which came back leaking and replaced it with a Mavel which has not come back leaking.A1 Cardone is another brand to stay away from too.Found out Subaru wants the old rack and pinions back as a core,put a $300.00 core charge on the replacement rack and pinion

@bbodan5393 3 года назад

Great vid on preventative maintenance. That hose to the pump guaranteed to become rock hard eventually. That hydraulic pump is the most expensive part of the system and,. probably easiest part to service. The OEM rack will last a lifetime if you don't contaminate the system. The rack, is less than $30 and seals and helper are maybe $40. The time to pull it, a "professional" rebuild and installation... priceless. For those who care, they are one of the most reliable systems on your vehicle. "Topping off" your fluid, without tracking down the source=contamination, #1 reason for failure. Keeping air from entering the high-pressure side will make the seals in the rack very happy. It's one of the least "wearable" systems. I'm putting my vote on a inner CV boot replacement somewhere in the future. I forget the exact amount, but I was just talk shop with my local Subaru service manager and it was over $200.

@phish27134 2 года назад

I'm having issues with my rack as we speak, how difficult is it to replace the seal on one side, then again its an 08 Spec B, the bleeder is so corroded I can't get it open, maybe pb, I got into a fender bender found a 5 rib belt to bypass PS pump, I was going to replace the rack, will I be able to drive the car, It has to go less than ten miles? To the body shop when I have a painted hood waiting to be installed. Everything has fluid as I go to bleed my reservoir foams up in a few mins I have UV dye but saw the end of the rack and PS all over the garage. Should I still dye it? I think the toe truck when dragged it some how pulled excessively on the tire to some how mess that seal up, otherwise the headlight was destroyed, hood bumper, but that corner panel is fine. **ANYONE ELSE PLEASE COMMENT OR 2 CENTS

@cajunaggie9815 3 года назад

Another great video. I have a legacy that I just got that seems to have power steering fluid in it rather than transmission fluid. Everything seems to be working ok right now. Should I try and flush out the power steering fluid and replace it with the correct type? Thanks.

@mbrick 3 года назад

I have this exact problem now that cold weather set in. I wrongly assumed it was the belt slipping but this makes a lot more sense. I was not able to find the o-ring part number in your description but for a 2006 Forester (and many others) it is 34439FG000. It is supposedly a -014 size.

@mariazarowna6702 2 года назад

What is the oring?

@mbrick 2 года назад

@@mariazarowna6702 i have one but did not change it yet. It goes under a fitting on the pump.

@timbrown9731 3 года назад

Man, I’m surprised I haven’t had to touch mine yet, but on my 13 H6 I religiously change the power steering fluid, I do it about every three or four oil changes!

@kurtfirestone2761 3 года назад

In you're honest opinion what is the best and most reliable yr of the outback. Thank you and love your videos

@izzyb6657 3 года назад

I can attest that the ps pump is pricey for an oem and not rebuilt. For my 06 Subaru wrx costed me around 350. The both hoses that connect to the ps reservoir both total price from the dealership costed me around 120. Replacing both hoses due to being hardened.

@lp2565 3 года назад

Good video!

@davidd166 3 года назад

I've had some issues with squealing from my steering on my 04 4 cylinder. Got the oem o ring only to find there were two on mine when I went to replace it.

@josevargas5472 3 года назад

Hey man, thanks for all the videos. I have a question: if the power steering pressure switch is eliminated due a leak, that affect the mechanic performance of the steering system? Ps. I am not a mechanic.

@Driver0808657 3 года назад

My 02 wrx had that hose crack on the lower side last year, same symptoms

@liftguy3148 3 года назад

On my 08 outback 2.5i I changed the hose and oring. They were tired,but did not fix the noise. After removing the pump, I found a seepage at a plug on the back of the pump. New pump fixed it

@Keepin-it-wheel101 3 года назад

thank you for this video. do you have one on oil leaks. I have a tribeca 09 H6. the oil seep is getting worst after 130K

@rafaelz6651 Год назад

Outstanding video.! Thank you sir.

@norbertbalint4851 3 года назад

Hello! I like your videos, keep up the good work! I was wondering if you could do a video of the problems or the things to look out for when looking for a 2.0 Diesel… I´m looking for one because of the low consumption but around 90% of the Subaru’s on sales that have engine problems are diesel… So, I´m a bit scared to buy one … I would like to educate myself about it. Thanks, 😊

@MrSubaru1387 3 года назад

No diesels here in the US...

@knivemile00 Год назад

Hi sir! Thanks for this great video. Will this work on 2016 Levorg too? The steering wheel has become so tight and heavy. The car hasn’t been used in a while.

@sirghostea1948 Год назад

have no idea if this is gonna work yet but i gotta say im a huge fan

@frankcastle9648 2 года назад

Thank you sir, I will attempt to fix my one

@yossibenel 3 года назад

Pretty useful 👍

@daviddenis4326 3 года назад

Thanks! I've been having issues with the power steering in my 05 Forester XT. I'll definitely take a closer look at the o-ring and hose. I also noticed that I have to tighten the belt every couple thousand kms or the wheel starts to kick. Do you have a video that would cover this issue?

@promethbastard 3 года назад

04 FXT here, I've done 5000k's in mine since purchasing and all I've done was draw the old fluid and replace with new in the reservoir. Haven't touched the belts and I'm sitting at 195k, preparing for the huge 200k service. Might be an incorrectly sized belt, or some other component (possibly not holding set tension?) in the belt's pathing.

@pellebrink4001 3 года назад

Love ur vids! My power steering sounds fine but when i jack my car up and turn my tire by hand i get a uneaven motion in one place, in what it feels like the power steering. Also getting a vibration when braking medium hard. Changed rotors and pads so i suspect its the power steering? What could it be?

@TangoCharlieAlpha 3 года назад

Do you have any videos that might address the Surge in voltage coming from the alternator? Seems like my lights get brighter and then get dimmer and it's a constant battle. I don't know if it's just a voltage regulator issue or what. Thank you.

@michaelmishue8453 2 года назад

Do you have a video on the rack and pinion? Mostly rebuild and/or replace. Think my 08 Outback H6 is leaking a tad from the passenger side seal as fluid appears to be leaking out of the boot.

@Alonsel3 Год назад

Sooo helpful thanks!

@ThePCgamewalkthoughs 3 года назад

Mr. Subaru, my 96 Outback is my first manual, and I love the car, though I did a very bad downshift that really, really jerked the car the other day and now started noticing this kind of noise, especially when turning after the car has warmed up. Going to check the hose and hope it's just loose but I may as well replace the o-ring too.

@coltonglover7229 3 года назад

Is it a tap on the top of the engine ? Or a knock deeper in bay?

@ThePCgamewalkthoughs 3 года назад

@@coltonglover7229 slight power steering pump leak. Put more fluid in and it went away.

@lawtonc9441 3 года назад

Watched video Friday got oring on Saturday and fixed my power steering noise on Sunday next going to replace the hoses

@lawtonc9441 3 года назад

Thanks you @mrsubaru1387 for the info

@bndp Год назад

Hi. great video. I have a 2009 Tribeca and I had a Radiator replaced a month ago and ever since then the power steering pump makes humming noises and the steering wheel is much harder to turn. any idea why radiator replacement would cause it? did the garage had to remove something related to the power steering to get to the radiator?

@TannishThomas 3 года назад

Hey Mr. Subaru, thank you for the information! My 2008 Impreza is having this same noise, so I'm gonna replace the o ring and hose and clips to help alleviate it. However, I have a question about the power steering reservoir. My p/s reservoir (part number 34630AG001) looks like it is leaking/sucking in air at the seam that's approximately 3/4ths the way down, I assume that the p/s reservoir is actually 2 formed plastic molds that are glued together (or at least that's my theory). Have you seen p/s reservoirs leak or suck in air at these seams because of expansion/cooling of the plastic? I'm debating on if I should replace the reservoir as well. Hope you have had a wonderful Christmas and New Year, and thank you for all you do for the Subaru DIY community.

@williamallen7836 6 месяцев назад

The reservoir is not glued. They are sonic welded plastic. I have seen sonic plastic welds fail over time, but you would see the hydraulic fluid seeping, or full on leaking from a seem that wasn't welded correctly. The other area you need to be aware of is the rack it's self. Ware the high preasure line connects to the rack could be leaking. The low preasure return side can leak as well, but is less likely to do so. Also beaware of the area that the high preasure hose transitions to the metal hard line on both ends, the line it's self could be bad. Then there's the seals in the rack that can be bad. One of the most common spots for a rack to leak is, the seals under the boots that seal the shafts. TLDR; first step is diagnose ware your leak is coming from. This way you know which part(s) to focus on. There are leak detection kits that you can buy at parts stores. The dealership may even sell one, but they will charge top $ for it. The kits contain a dye that you add to the system, and go for a drive. Then use the included goggles and UV light to spot ware your leak(s) are at.

@patrickchaplin2365 Год назад

G.B Stein said " silent gratitude isn't much use to anyone."- with that I say thank you sir!

@chrisroudebush7799 3 года назад

Good information I’m new to the Subaru family the ‘01 outback Ltd I purchased for my teenage son was whining like this and I thought I’d be changing the rack on it. Only has 68000 miles on the car

@snowrocket 3 года назад

Put the front of the car up on jack stands. Try emptying the reservoir. Disconnect a hose if you have to. Turn the steering back and forth, engine off, to purge the old fluid out of the rack. Hook up the hoses, and fill with the proper (Dexron? ATF) fluid. Start the engine and slowly turn full left, then full right until the whining goes away. The whining may be really bad at this time, but should gradually go away. Keep shutting off the engine and re-checking the PS fluid level. You may have to add several times.

@JDMluvDSMkila 3 года назад

do you have a video replacing the steering universal shaft on a gc era impreza ?? or could you give me some pointers on how youd go about it.

@randymitchem6462 3 года назад

NEED HELP. It just started to get really cold here in Quebec. I noticed when i start my car in the morning, i turn the wheel and it jerks. As if the belt is slipping or something. It also squeals pretty bad until the car warms up a bit or i give it a small rev. Any ideas?

@charlesbarber6805 11 месяцев назад

What size o ring should I get? And how many quarts of fluid will it take overall to flush the power steering overall?

@lopinitupou4626 11 дней назад

Thanks for the video brother. It was very instructive. Now I know why my Subaru outback 2005 would make those noises. Now I know to change the hose and o-ring. Thanks again

@themaestro5338 3 года назад

what about a 2010 Forester? My daughter's car is showing signs of a bad pump, but I'd like to try this first. It's noisy sometimes and it's a little stiff or funny feeling when turning it into and out of a parking spot. So, I hope the pump isn't bad, but...

@mudhudgie95 3 года назад

My 2014 outback 2.5I had a leaky ps return line that was replaced. The ps pump now makes noise like a piston slap noise but works fine and I Can't usually here it when driving until I slow down. Should I be concerned about the ps pump seizing and throwing my belt or having some other catastrophic failure? Or, should I just drive it until it gets really bad?

@pedlpower 3 года назад

Thanks for the Subaru video! My steering rack pinion shaft is leaking. Not bad though. When it starts dripping onto my driveway I'll have to rebuild or replace it.

@javierr3515 3 года назад

There is a kit for repair. I had the same problem.

@pedlpower 3 года назад

@@javierr3515 Yeah. It looks like it's a common problem. Is the kit Subaru or aftermarket? Thanks.

@joeblust8101 3 года назад

In your video, you mentioned that Subaru hasn't made a official rebuild kit for the PS pump thats on the 3.0l. I'm currently sporting a 03' VDC outback and noticed my pump is leaking a bit. No noticable whining at all, just leaking around the pump itself. Would it be possible to create a video of the differences of the 3.0l PS pump and the 2.5l PS pump as far as rebuilding them goes?

@KaptainKFC 3 года назад

I just replaced my power steering pump on my 2010 Subaru Outback. I also exchanged the brass washers as well as the o-rings with brand new ones, and I made sure to bleed the system. But the pump keeps making noise and the fluid is getting filled with air bubbles. Can you offer any advice? I know it’s not leaking anywhere, so should I keep bleeding it or should I just start it and let it work through it?

@lockshabaz1876 3 года назад

Would the first link you posted for the kit also fit a 98 Outback sport 2.2l?

@gefflynn7171 Год назад

Mr Subaru! Great vids! I have a 2005 OB 3.0 5AT. Having a difficult time finding a suction hose and o ring kit. Any part number(s) would be greatly appreciated. Thx

@xo4262 3 года назад

By any chance did you have a link for an 04 subaru wrx power steering seal kit? I will try that before replacing the ppump.

@eggpod4567 3 года назад

Oh. Mine cracked. I just changed the power steering pump and it still makes notices. Makes sense. I need to fix this today.

@MrSoulMonk 5 месяцев назад

Another great video! Yesterday, I had my radiator and thermostat replaced on my 2.5EJ (2004 Outback 5Spd) and I noticed power steering pump whine (which was absent before the work was done). I saw the reservoir was overflowing creating a mess inside. The mechanic was unable to explain the issue since the PS set up remained untouched during the repair. I wonder what else could have altered the PS system for this issue to manifest right after the radiator replacement.

@Allen-bm6tz 2 года назад

I have an issue where the wheel and steering wheel occasionally shakes slightly when I turn the wheel. It happens when the tires are on or off the ground. It happens more the I'm slightly off center. It might happen more when the system is cold. I've changed the suction hose and o-ring and the fluid has been changed and level is fine. I bought the reseal kit, but have not done it yet. I've never had an issue losing fluid. I'm not really seeing new leaks on the high pressure side or at the steering rack. Any thoughts? Thanks!

@Xite-Studios 3 года назад

I have a question about my Subaru, I drive a 2002 Subaru Outback sedan that has 260,000 miles on it, every so often it take a while to shift to the next gear when turning a corner and I have to take my foot off the accelerator to let it shift, I had the transmission fluid changed about 6 months ago and I am just curious on what you think the problem could be?

@mydv9305txdied 3 года назад

So is there an O-ring on the 93 Legacy? Is it just the return hose I need to check?

@renearrazola6599 2 года назад

Have you made a video of an electronic steering rack going bad? I ask because I believe mine on my 2016 Outback has issues as there is clunking when I back up and sometimes when I turn the steering wheel. I Have replaced the front struts (including the top hats) with fully assembled OEM ones and the clunking sound it still there.

@cadengreen6211 3 года назад

So I just changed my spark plugs and after I did so my fluid started leaking whenever I drive from the cap. Is this the problem in the video or is it something else. 2006 Subaru Outback

@InsideOutElectronics 3 года назад

What about squealing noise and steering jerking when car is cold ( does not matter what season is ) noise and jerking disappears when car warms up. What could be a problem ? Thank you. ( Subaru Outback 06 2.5I )

@afterthefallcreations 3 года назад

I changed my power steering pump recently and when I bleed the system the fluid was gray and thick, I recently bled the system again and the fluid way brown. I have no idea why, 05 auto wrx 2.0T

@sethblackmoore3057 3 года назад

Turns out my hose was the problem. It was very hard I originally tried changing the o ring but it would still make the noise. Soo I bought. A new suction hose and in removal of my old suction hose it had two tears in the hose . When I started up the engine the noise continued but I place more transmission fluid also allowed the engine to warm up I locked the steering wheel a couple times after the engine warmed up and the noise disappeared.

@robertmaxwell4056 2 года назад

Mr subaru can you rebuild a leaking rack and pinion on 90s outback?

@MrDoomzy 3 года назад

I have a little squeak. Idk if it’s from my belt or something but I’ve been having power steering noises like you’ve stated, I had to replace a return hose for the power steering because it had a hole in the hose. And I had to make my own hose because Subaru said they don’t make it anymore for my model.

@MrDoomzy 3 года назад

I’m gonna give this a try first. Thank you

@echardcore Год назад

Does this same fix work on a 2011 Forester? If so do you have a link for that hose kit too? Thanks for your videos!

@NickDanger89 7 месяцев назад

Is there a pump reseal kit for a 2003 Forester X? Also, thank you for putting out these videos!

@sergioin3D 3 года назад

I know what I need to do now :D

@alanbradford3130 3 года назад

Have the same issues on Hondas also.

@matthewramirez8901 2 года назад

Was there an Oring part number for the 2002 outback? I didn’t see it in the list…

@connorjacobs6 3 года назад

I have a solid hose on my 05 baja. Seems like 34611AE07A has been discontinued though and it goes for $40 on ebay. Anyone know of an affordable alternative of OEMish quality?

@kim-xi1fp 2 года назад

That's interesting because mine started to "whine" when the weather changed my car is a 2001 outback must give it a try

@LukeBrinkerhoff 2 года назад

So yeah, I had an issue, replaced o ring but still a problem. the Hose was hard enough that the spring clamp wasn't tight enough anymore, and you could actually turn the spin the hose. so I put a worm clamp on it for now till I can get a new hose.

@51249ca 2 года назад

When driving slow, and I turn the steering wheel left to right, the car has a good "warbling" sound. What might that be? 2017 Outback 3.6r Limited

@jmm6165 3 года назад

I can’t find the kit or parts for a 08 Impreza H4 non-turbo. Anyone have any suggestions?

@dominicfong6341 3 года назад

Incidentally, had that hose(as pictured at 3:48) replaced with just a regular bulk fuel line and the problem was fixed. The stock replacement cost way too much($50.00 Cdn). That hose was only less than 4 years old BTW. Have never thought a leaky hose would only let air in but not the oil out because on the exterior the hose was bone dry. Subaru makes crappy entry level cars compare with Honda and Toyota, that's personal experience.

@JuicyMonarch 3 года назад

Yeah my hoses are are rock solid on my h6 sedan coolant hoses too I have sum work to do .. hey I been having a cylinder 1 misfire since I got a tune up if u see this message can u guide me in the right direction because I’m thinking fuel injector .. mechanics where I’m at have no experience with h6 Subarus because most have the 2.5 4 cylinder I feel they didn’t torque that spark plug right I’m tired of spending money and I changed the ignition coil myself and the misfire came back so it has to be deeper than a ignition coil