Full step by step process of replacing and bleeding the power steering pump in your Subaru 2.5 engine whether in your WRX, STI or other model with the 2.5L engine. Bleeding can take as long as 20 minutes, continue to bleed until it no longer squeals at lockout. Failure to bleed fully can make the ABS/TCS and other dummy lights come on after driving a short distance so if this happens remain calm, just get it back in the garage and bleed some more :)
*Check out my Amazon store for more tools, parts and other items I personally own, use and love!*
www.Amazon.com/Shop/REDNECKTECH Thank you for supporting my channel!
TOOLS NEEDED:
-Ratchet
-3" extension
-12" extension
-12mm deep socket
-12mm shallow socket
-10mm deep socket
-12pt 12mm socket: amzn.to/3vjydmJ
-T40 socket: amzn.to/48fwRrD
-Magnetic pickup tool (recommended): amzn.to/41IhZ2D
-Hose clamp pliers: amzn.to/48DdRTQ (set), amzn.to/3RJm8hU (individual)
-Hose plug kit: amzn.to/48An0wb
-Jack (recommended): amzn.to/3ty1Pw1
-Jack stands (recommended): amzn.to/47fmd2F
TORQUE SPECS:
Bracket to engine mount bolts 16ft/lb
Disclaimer: This channel may make a small commission from any purchases made through affiliate links.
29 дек 2023
