SUPER CLEAN Your Dirty Engine Parts And Make Them LOOK NEW!!

Подписаться 21 тыс.

Просмотров 90 тыс.

50% 1

Cleaning and degreasing my Land Cruiser's dirty transmission and engine bay and making them look brand new! Today I completely degrease the filthy transmission and get it literally spotless using Super Clean degreaser and aerosol spray. This stuff works great for deep cleaning auto parts including engines, transmissions, axles, engine bays, etc and will melt off all the grease and grime! Now I can service this transmission, fix the leaks, and install low range gears in the transfer case without being covered in oil, grease, and grime! ‪@SuperEasySuperFast‬
Follow me on Instagram:
/ _rmgarage
Links to Products Used in This Video:
Super Clean: amzn.to/3Ub46UY
Foaming Super Clean: amzn.to/3BcwnE7
My Pressure Washer: amzn.to/3VU72GZ
Camera Equipment:
Sony ZV1 Camera: amzn.to/3VX5koq
Rode Microphone: amzn.to/3He5Eux
Lens: amzn.to/3VYL0TD
Tripod: amzn.to/3BcYiDL
Other videos from this Land Cruiser 80 Series build!!
► Full playist: • 1993 Toyota Land Cruiser
► Restoring an Old Wiring Harness: • Restoring My OLD Wirin...
► Full Engine Teardown EXPLAINED: • Toyota 4.5L Inline 6 E...
► 1FZ Bottom End Teardown: • INSIDE A 230,000 MILE ...
► FZJ80 Engine Removal: • Removing My Land Cruis...
0:00 Intro
0:30 The Dirty Transmission and Engine Bay
1:36 Prepping the Transmission
2:55 The Degreaser I'm Using
4:08 Cleaning the Transmission
10:09 Final Results, Unbelievable!
10:46 Engine Bay Cleaning
12:49 Engine Bay Final Results
#toyota #diy #howto #landcruiser #rmgarage #cleaning #4x4 #offroad #auto #automotive

Авто/Мото

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@rasmadrak 11 месяцев назад

I need to remember this the next time I'll clean my car - remove the engine, spray it down and reinstall. :')

@johnreynolds1527 3 месяца назад

That Transmission Came Out Super Clean! 💯

@xman21196 Год назад

“I’m not looking to make it perfect” makes it look perfect!😂

@zerochance8581 11 месяцев назад

It’s a Saturday morning, having a cup of coffee and staring at my DD 91 LC and my newly acquired 94’ LC train wreck and looking for inspiration. This is certainly the right channel. Your hard work and well sorted efforts are appreciated.

@daledog16 6 месяцев назад

Who ever installs a dirty part should never touch another vehicle ever

@GAMEOVER-dq9jj 5 месяцев назад

I'm glad you have alot of time and money. I will send you my info, you can send me some.

@gtiguy727 5 месяцев назад

Amen!!!

@gmans7859 4 месяца назад

Yes, I love my Brother but he does sub-par work. Now I get to undo it. Bracing for the challenge. It's bad.

@user-ds9zd8eq6u 2 месяца назад

Correcto moondo

@JVR_Funwithdesign 8 месяцев назад

Don't let perfect be the enemy of 'done'...

@meganfoley4123 Год назад

Shockingly clean! Didn’t think there was any hope for that transmission grime 😂

@davidp130 Год назад

May as well replace all your pressure sensors on the transfer case now too. They go bad and cause your CDL to not engage. There's lots of info on mud about it. Love the vids👌

@6thGearGarage Год назад

Awesome job, I’m sold on Super Clean!

@RM_Garage Год назад

Thanks man!!

@Spillmansgarage Год назад

Subbed! Fellow Toyota guy here. I’m in the midst of rebuilding the engine and trans in my 2000 Celica GT-S. Going to use this method to clean all the oil grime up. Thanks!

@RM_Garage Год назад

Sweet!! Thank you!

@DirtGarage Год назад

Good work man! Looks so good

@RM_Garage Год назад

Thanks Clinton! I’m surprised how well it came out!

@ToyotaWorldRunners Год назад

Great video Ricky, such a satisfying job - and even to watch! Does the Super Clean come with the sick goggles too>! :D ;) Stacey and I both were like, "wow those fenders are green!" lol

@RM_Garage Год назад

Haha. I put them on because I kept getting grease water in my eyes. Lol! Thanks guys

@Silentway247 Год назад

great work. I'm humming along with you and my 94, built the harness like you as well with tesa and all that, thanks for the recommendations. One thing I am doing is having the steering box rebuilt with the 105 sector shaft. Common failure when offroad

@RM_Garage Год назад

I have that on my build list!

@projectxdrift63 Год назад

Super clean!

@davidh5652 4 месяца назад

amazing video good job

@ImprovisedExpletiveDevice Год назад

awesome work

@MarkDelonjay 3 месяца назад

Just use starting fluid. Spray on .watch it do its magic

@motor.mausGarage Год назад

You should be fine to support the trans on the pan, just use a block of wood in between the jack (according to the FSM).

@jonathantenorio8829 6 месяцев назад

I did the same with my mitsubishi eclipse. I also used two detail brushes just to get the spots that are hard to get

@ryancorrigan5953 Год назад

Looking good! Is it possible to leave the lines and cap? That way you can easily hook back up in future if need be. Keep up the good work!

@RM_Garage Год назад

I like how you’re thinking. Future proof it just in case. I’ll do that!

@A_Litre_of_Farva 3 месяца назад

nice work. Is your pressure washer hot water or cold? Is it a hi pressure or is it a cheapo model like mine?

@fixingrandomstuff 9 месяцев назад

EPA will be visiting soon I bet 😂

@Chad03Cobra Год назад

If you ever do this again I would try to get a pressure washer with a heater and get the temp of the water to 180 degrees melts oil pretty good

@RM_Garage Год назад

Definitely will try that!

@VT5874 9 месяцев назад

Which do you think works better? Liquid or foam?

@longlivechina7538 4 месяца назад

Your my hero

@gmans7859 4 месяца назад

I'm in trouble a little bit with my newest project. OCD. IT'S GOT TO BE CLEAN!!!

@austintalley4070 Год назад

Make a little stand to hold the transmission up. Craft it out of 2x4s

@1995Kakashi Год назад

Super Clean ! I needa do this for my 80 cuz my front main seal has seen cleaner days 🤣

@RM_Garage Год назад

We’re doing a giveaway for it!

@1995Kakashi Год назад

@@RM_Garage hook it up! 80 series gang gl to me

@RM_Garage Год назад

@@1995Kakashi check out the giveaway post on Instagram! @_rmgarage

@LXCScaleCars Год назад

Nice work! what kind of pressure washer are you using?

@RM_Garage Год назад

It’s a sunjoe spx…something, maybe spx3000?

@somalia5019 Год назад

New subscribed from Somalia

@edlobos5 Год назад

Should look into at wits end rear heatee delete plate

@RM_Garage Год назад

I have looked at it!

@haadali2764 Год назад

Would you like to tell me the name of this degreaser because am from Pakistan

@tempest411 3 месяца назад

I wonder what all that cleaner did to his lawn.

@harwoods11 11 месяцев назад

Just use a hot steam pressure washer. No materials required. That's what they use in UK before they do bus/truck/lorry mots.

@RM_Garage 11 месяцев назад

Might get one in the future. Have you seen the method they use to freeze and chip off the grease? Looks pretty interesting.

@sterlingchristy2107 11 месяцев назад

😮😮wow

@Magicinstalls 8 месяцев назад

I'm thinking a 3000 psi pressure washer would do a much better job maybe even get a jitterbug nozzle

@ivandimitrov199 9 месяцев назад

imagine having a real pressure washer u wont need second pass

@Kopfnuss417 Год назад

If I had cleaned it like you, only here in Germany, I would certainly have gone to prison - environment 😂🤦🏼‍♂️ But, Great Work!🎉

@kealahau6727 7 месяцев назад

After just a wash : For sale fully rebuilt 6000$ 😂😂😂

@RM_Garage 7 месяцев назад

Ha! I bet people do that too

@CUSTOMWORKS7.3PSD 5 месяцев назад

next time use heavy duty stove/ oven cleaner

@brendalahti4045 10 дней назад

Be careful it will eat rubber .

@ricardovelazquez1650 Месяц назад

Use a brush, do not use too much water

@TheBigahmad09 6 месяцев назад

Use a cherry picker or what u call engine hoist

@thulsa5218 3 месяца назад

God almighty...who has the time for a project like that?!

@pdubowner 3 месяца назад

RU-vidrs. Lol

@tortoisearmor310 Год назад

Bro you need a better brush...

@RM_Garage Год назад

But it worked! Haha

@0ngy697 7 месяцев назад

Get a better nossle

@heydonray 3 месяца назад

Doesn’t look so amazing.

@dfj1725 10 месяцев назад

These are not good degrease. They are not working at all. Good degrease should instantly dissolve the grease without pressure wash or brush wash.

@Initial_Gopnik 7 месяцев назад

😂😂😂 tell me youve never cleaned greasy 20+ year old car parts without telling me youve never cleaned greasy 20+ year old car parts, it never works like that, and what this guy had to clean was cake compared to some of the stuff ive seen and cleaned.