Surplus Gas Masks, what to buy and what to avoid? 

Hmm I think I’ll go with a ww1 gas hood

The cheek filters were made to avoid the canister getting in the way of firing a rifle. Cheek filter mask clones are still good for biological.

Harbor freight respirator and pool goggles gang who up

Most preppers are kidding them selves in regards to masks anyway...like you have said,the filters have a 10 yr shelf life and the actual rubber masks are scrapped as U S after a maximum of 20yrs(the last 10yrs training only).then you come to nbc suits that are only good for 10years lol...the only practical use a prepper could expect to live long enough to don one would be against tear gas as you have said....real nbc attacks would kill em dead...the lads in gulf 1 had to wear the suits all the time because they wouldnt have got them on in time when the siren went...best advice would be for preppers to buy NEW industrial filters as they are avalible and would work the same for tear gas and more likely encountered industrial accidents

Great video, great idea doing this mate, it should help lots of people choose what to get, to be honest most people including myself don't have a clue whats good, dangerous or worth getting.

I had a british C3 but i lost it DX I replaced it with a cheek filter style mask. It almost looks like the one you czech one you showed . My idea was to remove the cheek filters and replace them with a tube that conects to a filter tank. I think the biggest chalange is to find a adapter that fits perfect with the mask so that there is no leak.

I want to get a GP-7 gas mask, and then walk up to people, knock a soda can off a counter and tell them to pick it up.

these 8 dislikes were like: *OH! A GAS MASK VIDEO! I DONT LIKE GAS MASKS SO IM GONNA TURN IT ON AND GIVE A DISLIKE!!!*

Late to the party, but I bought a GP-5 a year back on a school trip to Berlin, and I've been getting into gasmaks through your videos. In terms of storage for the old filters, I didn't get a cap for the old filter that came with the mask, is it fine to store it open or have I subjected myself to asbestos poisoning or what?

Coronavirus happens and this is in my recommended now, thanks RU-vid!

Had to wear the US gas mask in the 80s. Had to have stupid eyeglass inserts to see. Then I was always P---d off wearing it because the mask crushed my face squeezing it hard. As for the charcoal, how can it go bad unless it is unsealed to let in moisture and stuff?

I've got a Canadian C3 that's had a non-removable 40mm adaptor factory-fitted, I'm not sure when Canada started conforming to the NATO standard but should I trust this over a mask designed with fittings to accept 40mm filters? Do you know anything about this particular case?

Avoid cheek filter masks Looks at my cheek filter mask in the corner

i'd suggest canister filters (NOT THE SOVIET ONES OR ANY OTHER CANISTER THAT CONTAINS ASBESTOS) and particle filters

This video was made ahead of its time

These are going to be the only kind of videos in a apocalypse

My “newest” 60mm filter was dated July of 1992

I love the gp5, shame it's not particularly comfortable. Really good information!

I´ve got a GP-5 myself, but i sealed the filter after 1 use a fire at home broke out, cuz then i heared that there was asbestos in them, was quite not cool to hear that.

Me and the boys going out during quarantine

I had a yugoslavian mc1 gasmask with a 60mm filter, just for the coolness. I later got into prepping etc and was planning on getting some more filters. Recently I removed it from its bag and the filter came off. I thought it must have come loose and went to screw it back in. I then noticed that the thread had been ripped off the mask. Upon closer inspection the rubber where the thread once sat was still maleable and tacky to the touch like the rubber didn't set properly. such a shame but in all honesty it wasn't the most comfortable mask plus the texture inside makes your skin itch. Im kind of glad it broke now than when i needed it. I was planning an upgrade and got a 1982 british s6 that is in unused condition. Absolutely spotless inside and out (apart from the usual fluff etc) with no signs of cracking etc, gave it a good soak. it seals well etc I was just wondering whether it would be safe to rely on or whether it would be better to get something newer like an s10 or gsr.

You cannot screw gost and mato threads interchangeably, it will damage the thread and most likely wont seal

Guys! You can buy 60mm to 40mm NATO adapters!!! (Can you make a video on that Mr.Weaponsandstuff93?)

thanks dude,so awesome to have you share all your knowledge,you are a treasure!

Well I have a Romanian military grade gas mask and I'm not sure how good they are since their design is a bit different from these shown in the video, the tube filter is a bit bigger than these ones and it also has another filter right on top of the tube filter . could you help me with this question? Thanks.

Y have EO-19 yes the cartrige are inside the filters of the PBF are meant to last as long as 24 hours, depending on the level of air contamination so playne time to change

there is also an m10 to 40mm adapter. I 3d printed mine and it works and passes a suction test.

Would you recommend a Polish/Soviet MC-1 gas mask? I've seen a lot of deals on them and was wondering if it was actually a reliable mask.

Hey, what army surplus stores do you recommend in the UK or in the EU in general?

Interesting video, but my question is how were you able to test the masks against tear gas?

I got the cheek filter mask on the left (pbf) and both the 40 mm (gp5 and fm12) I love my fm12

Even though the cheek filter masks are hard to get filters for can they still be used if have more modern filters?

I own a czech m10m, I use it as a book stop. Does it's job very well

Are expired filters dangerous to use or will they just not protect you?

The Chez m10m has a 33mm check threads if you could make (3d print) a 33mm to 40mm adapters you can have a great mask the rubber is flexible and still like new and they cost only 10 dollars verses 200 to 500 for the others.

Great information, you really gotta appreciate this channel if you're a gas mask enthusiast

I don't know why but I just like the look of the gp5

Frick got the 40mm filter But it's *probably* just for decoration

I have a GP5 and want a GP7v because the filters get covered in condensation and its all icky and gross and GP7v masks you can have a drinking thingy attached so its okay to keep on and drink

What about a non issued still sealed Respirator Gas Mask Forsheda NBC F2 A4 Civilian Gas mask from 94?

Where can I get filters for a polish mc-1 mask

So I have the gas mask m10m and I have it "Brand new" but I saw that there are no filters in it. So, can I somehow fit the filters inside the mask (I didnt fully get it how to put them in)?

Man can’t wait to get my artyom cosplay underway

i have the m10m and am getting the polish civilian mask mc-17

Great video, very informative! Thanks! :)

Love this channel. Liked and subbed.

How bad are GP-7 filters or are they basically the same as GP-5 ones?

What 40mm filter can I buy for a polish mp5 to stop teargas primarily?

Yoy can buy adaptor for 60 millimeter masks to 40 millimeter so its fine. It can still make a airtight seal

You said the polish mp4 mask you cannot get filters for funny thing on budk they sell the filters for $10 Usd. So im gonna call shenanigans also they can use external filters if you get the correct ones which i have purchased in the past and they work wonerfully.

Is it ok to add a 3m particulate material to the old Russian canister and mask?...like your previous video?

Hey man I just got a israeli civilian gas mask, what filters would you recomend (link preferably)

So you are saying that we have to avoid cheek filter gas masks. But, if i want to buy a m10m for decorational purposes?

Would you recommend the SGE 400/3 ?

Actually theres one thing that is cool about the first type of masks - they are cheap as dirt in my country. And filters are cheap too. I just wonder how long can i use them wihout changing filter... Hour? Half hour? If its about hour then i think its pretty reasonable to get one if its really cheap and you only plan to stay in home and dont really walk out too much

Isnt the Israeli filter charcoal, whatbdoes charcoal keep from

I'm getting a gp5 but I'm not gonna use the filter that comes with it because it's old and might have asbestos. What filter should I use?

nice information...great job...

Oh, So much true in this vid. But simce am playing Stalker LARPs and since am in Czech rep. I have M10m mask at home BUT it has one advatage, you can drink with IT

are there laws on owning and using gas masks? im looking at gas masks for health reasons i wish not to specify

Some people had M10 mask with filters outside.

Where can I get the polish fp5 filter for the gp5 mask cheaply?,

Would the charcoal or any other chemical compound inside the PBF gas mask filter be any effective at all? Would the protective agent be expired or depleted?

One question once the filter starts to be used how long can you use it for?

where'd you get an M61 filter for £1.50, I usually see them on ebay for about £6

March 2020 which gas mask is best... Click

I got two m10m one works and one don't but still got except like said the chick filter

Hello, impressed with your site. Wondering which masks will work well with glasses. I keep my hair short clean shaven, with a mustache , but ware glasses. would a mask with a panoramic face plate be better for me and my partner? Please advise. Best regards

Are there any you recommend for 8 hour+ usage Are the TF-1 capable comfortably in an air-conditioned environment?

Where do you get your 40mm filters? I can only find 1990s ones

Can you clean a 40mm gasmask hose and if you can can you make a video on it

Definitely get modern filters

I got the gas mask to the right at the beginning of the video Would recommend if you’re trying to gas out your neighbors and survive

Do gas mask protect you from smoke from a home fire

I used to own a few MCU2P NAVY MASKS...

This is really relevant now

Are there any models you would recommend for someone who requires glasses?

Are S10s any good?

At one time the IDF mask was the one to look for. Can you comment on that and if you has a choice what would you look for?

I own a gp-5 and a Czech.

I have a 40 mil adapter for my c3 so I think I’ll be good

I think it would be cool to see all of your gas masks

Weopens and stuff now only needs a nuclear bunker

the filters for our czechoslovakia m10 gas mask, at czech shops we still have them and they are really cheap like 40 czech crowns (1.30e) something around that :D

5:05 the gas mask on the right , I have it but what’s the filter to it called or where would I get one

I uss a old gp5,i love the fear Factor it would give anyone else around

4:05 wait what 😳

just wondering I live in the US but I was wondering if you had any suggestions on where to get an S10 gas mask that would be in working order?

CoronaVirus fear bought me here

Are gas masks safe against smoke?

i have mc1 and i have a unused filther :D should i buy filther conventer?

I'm collecting russian gas masks, what ones would be best to buy?

Aren't 60 MM's common online with a seal?

There are 60 to 40mm adapters and the field of view isn't so bad on Finnish masks.

Good video and well said

Change filters? Your NBC suit is only intended to keep you alive long enough to accomplish your mission.

I was wondering what's the difference with the "normal" GP5 and the version with the long hose, or whatever it's called

Well, these will help with going outside currently

Here in Brazil I can only acess gp5

Does anyone know if there are gost to stanag adapters or something like that