Suzuki DR350S review with upgrades and accessories

Подписаться 6 тыс.

Просмотров 8 тыс.

50% 1

Check out our friends over at motocampnerd.com/?ref=x5edt978ga for all your motocamping needs!!
Check out the BDR page: ridebdr.com/mabdr/
Amazon Associate links
Baja no pinch tire tool (makes changing a tube a breeze!) amzn.to/3vkHF6S
USB charge port: amzn.to/36Sia3k
Mini moto tire irons: amzn.to/3OB4vi2
Mini air compressor used here: amzn.to/37JVPoY
Jet boil used for cooking: amzn.to/3KiZtTW
These boots are expensive, but worth every penny, best adv boot I've ever worn for comfort! Broke in as soon as you put them on! amzn.to/38q4tca
*The stock gearing is a 14t in the front, the one I have is a 13t, sorry I misspoke.*
Alright Guys, here are the amazon affiliate links for the 1993 DR350s accessories.
Mmoto rear rack (Ukraine) www.mmotoracks.com/product/wh...
Motionpro fuel line (best in the business) amzn.to/3cfItCH
Acerbis 4.25 tank for 93 DR350s amzn.to/3B3nnCa
Charging port amzn.to/3Omn0FJ
Ugreen charging cable for samsung amzn.to/3PEjOq2
Dunlop D606 rear tire amzn.to/3RL7DcI
Twin USB charger for tender cable amzn.to/3ochnzj
Protaper bars that I run (CR high) amzn.to/3ofy7Wh
Tail/Brake light LED bulb I'm running amzn.to/3zj1vBh
Battery tender cable amzn.to/3IR2Tyc
EBC Red rear brake pads amzn.to/3yThcOb
Fuel filters amzn.to/3ogYoDE
Scott grips (ones in video discontinued) amzn.to/3Ol9VfC
Dynojet kit on this bike amzn.to/3aONUZ0
Acerbis hand guards amzn.to/3yRcL6s
Phone mount amzn.to/3OlwZef
Phone mount vibration dampener amzn.to/3OlwZef
Seat concepts LOW Comfort seat: seatconcepts.com/products/suz...
Super hard to find air adjusting screw seen in the video
store.moto-lab.com/products/6...

Опубликовано:

19 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@insatiable_mind Месяц назад

I got a Ukrainian tail rack a few months ago. It took maybe 2-3 weeks to get it. I ordered it on eBay without looking where it was coming from. They emailed me to let me know there may be shipping delays but it came.

@PSBEadventures Месяц назад

Awesome

@hazcat640 Год назад

That's a bike that needs to go back into production! Perfect size. There's nothing on the market in that size that I consider a fun duel sport (no, not even the CRF300 or the KLX300). You probably know this but a TINY dab of grease on the back of the brake pad between the pad and plunger will often stop the squeal.

@PSBEadventures Год назад

Absolutely agree. I've written Suzuki and told them I'd buy one brand new if they brought it back. The 650 isn't a bad machine either but a touch heavier. So far you can still get them new

@InvidiousIgnoramus Год назад

??? it's the exact same frame as the DR-Z400.

@PSBEadventures Год назад

@@InvidiousIgnoramus I don't think so. This bike has a dry sump oil system and the frame is the oil tank

@cleckler2935 Год назад

I love it. Thinking about doing the fmf exhaust and rejetting the carb on my crf230l. I don’t really want louder exhaust but it would be nice to have a little more power when hitting those hills and head wind. I love that you take such pride in a older bike. Take care Chris

@PSBEadventures Год назад

Thanks man, yeah, opening up the exhaust and intake on the smaller engines really helps! For sure man, this has been such a good machine it deserves a bit of love! Appreciate ya watching!

@cleckler2935 Год назад

@@PSBEadventures I’ve never done much work on carbs except replace them so I might have to get some help with that. I’m thinking I need to adjust my valves also because I was only getting an average of 55mpg on my trip. I was thinking that little bike would get better than that but maybe not. Maybe opening it up would help with that too. I appreciate you putting out good content! You get them hats for sale I gotta get me one!

@peterclemmins7099 11 месяцев назад

I got a rack after the war broke out and it only took about 2 -3 weeks to get to me. Cheers.

@PSBEadventures 10 месяцев назад

Good news!

@pkonolan 3 месяца назад

Dead ringer for my updated ‘93 DR350 except the decal on the plastics and the paneer rack. Right down to the USB charger. They are great bikes.

@PSBEadventures 3 месяца назад

Aren't they!!! I'm really loving the 4.25 gallon tank! Such a great machine! Thanks for watching!

@4jeeper95 Год назад

I run metzler mc360 mid hard rear and its Amazing. under 90$ and I actually like it better than the d606...shinko mx216 fatty in front...amazing combo.

@PSBEadventures Год назад

Looks like a great tire for the money, and DOT approved!

@Sam-xt5gb Год назад

I checked out the link to the Ukrainian rack and it looks like they're still making and shipping them!

@PSBEadventures Год назад

Good news!!

@insatiable_mind Месяц назад

I have the ‘93 DR250SE. Mostly the same bike with a different bore and stroke and different jetting. It’s geared lower than the 350 but I don’t know if that’s in the transmission or just the sprockets. It was stock when I bought it but I replaced the front fender, added a tail rack and I’ll replace the handlebars and add bark busters. I don’t know if I’ll be taking it far enough to change the tank or if I’ll change the exhaust and jetting. I’m pretty happy with it as is.

@PSBEadventures Месяц назад

Yep, great bikes as well!

@yDAUNL3SS Год назад

what kind of grips do you have on there and what's the size? also very nice and clean bike!!

@PSBEadventures Год назад

Thanks! 7/8s bars, Scott grips. Dropped a link for similar ones in the description. Gray were not available anymore. Appreciate the kind words and thanks for watching!

@SNxr400r Год назад

Great review...I had a dr350SE before and thinking about getting another one... What jets are you running in that now? I had trouble with my gear box jumping outta gear and was glad to find your other video explaining that. I like these old Thumpers and might get another DR or Xr400r...not sure yet....Really enjoy your channel....Keep on Keep on.....Cheers...

@PSBEadventures Год назад

Thanks!! So after a ton of research on the jetting subject, I found out a few things but absolutely nothing definitive. My bike all stock had a 135 main. It was always pretty lean except wide open and it actually black smoked some at wot. The stock mikuni bst33 has a fixed needle position and I needed a tiny bit more fuel on 25% throttle to 50%. I decided to go with the dynojet kit since you can select the needle position. The thing is, the size on mikuni jets and dynojet jets are not the same. They are 4 to 5 sizes different for some reason. I don't understand why it can't be a simple number for a simple orifice size, but nevertheless, it seems totally different. I think I ended up with a 140 main and middle clip position, stock pilot and about 3 turns out on the air screw. The top of my air box is open and the DG pipe frees it up enough to need that bit of extra fuel. I'm pretty happy with it overall especially the extra power and 62mpg. It has a tiny surge just off idle cruising mostly only when cold, I can live with it though. Here's a link I've been using to help the tuning process for jet size explanation. www.jetsrus.com/FAQs/FAQ_mikuni_vs_dynojet_vs_keihin_sizes.htm

@SNxr400r Год назад

@@PSBEadventures Thanks for answering....I just found a DR that I think I'm gonna buy...I also have a Yamaha xt...but I need a little more Horsepower for road trips..appreciate your tips and knowledge!!!

@PSBEadventures Год назад

@@SNxr400r awesome!!!

@itouchipods Год назад

I’ve got the same bike, same exhaust, same header. 3x3 airbox mod had already been done when I got the bike. I’m currently jetting the bike after swapping to the pumper carb and curious what jets you’re running? Dj needle? Nice build man, you’ve convinced me to pull the trigger on a Ukrainian rack! Been eyeballing them for years now!

@PSBEadventures Год назад

I'm running the BST33 carb on mine and using dynojet needle with dynojet 140 main. It has a tiny surge off idle and is just a touch rich. I ordered a real mikuni 135 and the real adj needle from mikuni at Motolab. Gonna see how that does.

@Iron936 Год назад

how difficult would it be to upgrade the front forks in this day and age?

@PSBEadventures Год назад

A lot of folks go with the RM250, 2000 up inverted front forks, or a drz400. I've been looking for a rm250 for parts for a bit

@Iron936 Год назад

@@PSBEadventures So if i have a pair of forks from a rm125 would they work?, would I also have to replace the triple clamp?

@PSBEadventures Год назад

@Iron I believe so, yeah, you'd need all of it as far as I know and possibly the stem bearings sized to fit as well. I want to say if you search it up there's a good article on it maybe on adv rider.