Suzuki Fishing Team Boat Gets New Engine  

Follow all our Adventures on our new channel - ru-vid.com/show-UCJfA7nikBEM9gR_PyCbUmGg Follow all of the Suzuki Fishing Team on Instagram instagram.com/suzuki_uk_fishing?igshid=MzRlODBiNWFlZA==

Thank you Raymarine for supporting these folks. I already use exclusively your products… this just confirms your quality as a company.

Wow - just fantastic! I think that the 'Suzuki Fishing Team' are absolutely brilliant for adding you because something like boating or fishing (from a boat) can be daunting to take up just because there is a perception of being difficult to join or do (especially here in Japan). The Suzuki Fishing Team have in one single action made it look welcoming and accessible. That alone give one the confidence to walk into a marina and ask questions. Naturally, there isn't any reason why anyone shouldn't do that, but removing ridiculous perceptions that people like myself have is really welcome. Simon and Gemma are also contributing massively to encouraging many to consider taking up boating and/or fishing.

Looks like you guys are getting some material recognition for the TITANIC amount of work you put into the channels. Your videos make me believe that you deserve it. Enjoy the fruits of your labour!

Thinking you should consider if you haven’t already, some ventilation in the battery compartment. They will put out fumes as they charge and your power supply may suffer from the fumes. Love your content and look forward to all your videos been watching your videos for a very long time.

Can't hardly wait until we see the boat in the water. Looks Great 👍

I was gobsmacked at how quiet that engine was on tickover, ok its gonna scream like a spoiled toddler when Simon is thrashing it over the sea but thats all part of the fun. Well done team Robbins 👍

Hi Guys the boat looks fantastic and great work on Suzuki Fishing Team Sponsorship.

Batteries - we ran a similar setup with one "engine" battery and one "electrics" battery but we also had a cross-link switch between the two so that in the event that one died you could use the other to, usually, try and start the engine. Always call the coastguard to let them know what's happening before you flatten both batteries though :) A mains powered smart batter charger is great to make sure that you are always ready to go and makes the batteries last longer.

Oh heck yeah! Suzuki makes a great product!

You deserve the best for all your hard work, you'll catch some huge fish! Tight Lines!

I’m impressed with the Suzuki guys installing the engine for you and setting it up. Don’t really get that kind of service much anymore. Great job guys.

Simon you should encapsulate those transom holes with epoxy by drilling them larger and filling the hole with epoxy than when it cures drill the right size hole for the bolts that is required. That way the transom won't rof from the bolt holes.

Congratulations on your sponsorship from Suzuki

So glad you got everything to be safe and the fantastic sponsors Including Japanese Suzuki wow it looks so good.

It is interesting to see you two in your comfort zone. This episode is basically you walking us through what you guys do for a living. Granted it’s on a boat, but this is all standard jobs on building customizing RV’s. Most probably don’t know that about you all unless they dig a little bit.

That is an insanely good-looking little boat, you have done an incredible job of bringing an old girl back to life and you deserve all that sponsorship, you worked damn hard for it.

Hi for the glow in the dark attractor's use a camera flash in milliseconds they will be great. Tried and tested 👍 Then you can use the grow light to grow some Herbs ,well I was going to say pot 😂✌

Great video, nice to see that "finnish" (Finlands flag is blue and white) boat being finish. But I saw a PC-fan in danger, 12V battery power will shorten the lifetime for any 12V PC-fan. By putting a resistor in series with the fan will protect the fan. Formula for the resistor in (13,8V-12V)/current, current is the value stamped on the fan an the result is in ohm. And if you not have a name on the boat, my suggestion is "Fish happens".

Well done, guys. Your hard work has paid off. The boat looks great. Happy boating.

The boat is looking great. I have enjoyed the build series. I look forward to the next video and seeing it in the water.

You guys did a fantastic job on this boat. Happy boating!

It's turning out to be quite a good looking boat

Wow Simon, You do a better job cutting a round hole with a saber saw than I do with a hole saw!

Great job with the boat can hardly wait to see her on the water.

Simon has been watching the same channels as I have. Just saw that spanner trick and can't wait to try it.

Good to go the boat looks great. The colour scheme brilliant.

Congratulations for being part of the Suzuki Fishing Team. The U.V light box is a great idea and nice touch. 👍

The outboard is something else. the boat is looking so good.

Very nice episode! And it is good to have at least one maiden voyage of yours in the immediate future! (waiting for the other one ... but I know that takes time) So, looking forward to seeing you NOT sink!

Well done for your sponsorships just need the fish to bite love the boat you have done a cracking job that is one beautiful engine good work on the electrics especially the conduit idea just need a portable electric rings for cooking now to go with the power station 😊😊😊

Congratulations guys. 🎉. Boat looks awesome Go out and catch some fish and have fun. Be safe. 😎👍

Credit where its due, as a diehard dangler from The Solent area, the uv light idea is a stroke of genius! Ditch the muppets though and get some proper plastic! 👌

One silly suggestion, when you go for cushions et-al BRIGHT COLORS just in case you have any sort of emergency you will be easier to spot. Your hull color scheme is beautiful but blends into many sea conditions, having things beside the life jackets that are hi vis (even if not real high vis but bright colors.

Brilliant, well done you two and, your sponsors.

What a great video. I am SO happy for you. You certainly have worked hard for the support. I know what ever happens out on the water, you will produce some great content for your 77,000 subscribers and have a good time ! Best of luck, always 😊

So wonderful! Cannot believe its the same boat!

Awesome lookin outboard !

Nice work, like the use of 'wasted space'. Now this is where this [15:50 in] portable power station thing goes between the starting and house battery? Excellent idea! My thoughtifs your not good a fishin, and you want to win the fishin comp, take a sticka jelly, light it, chuck it in and DUCK! Nice job on the stickerin Gem. Lubly Jubly motor 2 but. I've seen your boats big sista photo of Facebook. Gotta tellya, a pro boat against your rebuild, it close. Nice work! Thanks m8s!

That conduit trick is genius! What fantastic support. It might be easier to say 'anglers' rather than 'fisher people'. I smiled my way through the whole episode. Chuffed for you.

Absolutely FANTASTIC! ... Not just you two, but the partnership with a wonderful outboard Suzuki. All the luck guys. Thank you for sharing!

Hands down the best outboard, loved mine, Btw get a can of Inox and spray under the cowling all the metal will keep and it does not 'eat plastics or rubber.. best used after wash down while the motor is still warm... mine looked brand new after nearly 10 yrs of sea use...

Congratulations on all of your progress! I thought that your idea of the UV lighting to charge your fishing lures was brilliant! BTW...does your boat have a name, or is that revealed during a proper christening?

Love it! Such a great looking boat and motor combo!

Thats a sweet engine and looks the biz on the back of the boat. I remember my teens on Lough Derg on holiday hanging onto a 3 HP Seagull Engine. Bomb proof little engines, but the vibration and sound like road drill on the end of your arm; you couldn't write your name after twenty minutes. Great holidays. Never caught anything other than one measly perch in all the holidays. I'd do it all over again. Had a thought in relation to your fan under the console. Fit a rheostat control, so you can reduce the noise for one and slow down the flow of air into the cabin to what's comfortable. It's cold on the water at night.

quite the epic motor installation music !!!

Well done, you’ve both worked hard as always on another project, something to have and get some relaxing time away from your main project, after all, everyone needs a break. By getting sponsors on this project just goes to show they have faith that they will get some good publicity from yourselves. Cannot wait to see you on your first seaboat trial and your fishing practice for the competition.

That skiff tricked out nice :)

Hay! Your enthusiasm for the two projects is tenacious (stalwart, stout, strong, sturdy, and tough. While all these words mean "showing power to resist or to endure," tenacious suggests strength in seizing, retaining, clinging to, or holding together.)

That's a fantastic looking boat. Well done you two.

I think i would have mounted those battery switches as high up as possible. If you swamp you want them to be the last thing that goes under water.

If only the big boat project could be completed in the time it took to complete this project. Looking forward to seeing you two actually fish.

Just a thought for the batteries to help absorb impact underneath a rubber car mat under the batteries as will absorb impacts that is what we did to our boats. Dont forget you drain plugs before in the water.

What a great transformation! Your little fishing boat looks great! And I imaging that it would be well suited as a dingy in the future. And congratulations on being picked up by Suzuki!!

I was watching wondering what size motor you would go with and I was thinking for the size of the Boat you would only get a 30 hp on the transom before it would be oversized But I am thinking old size motors and that 60 is absolutely perfect for the Boat the Motors have come down in size dramatically That Boat you Built is Absolutely amazing You Two are Going to KILL IT FISHING stay Safe

fantastic vlog carnt wait to see the next one and see how the boat handles

Absolutely love your shows! The two of you are completely amazing together and it shows in the great content you consistently create. I'm always looking forward to your next installment. Thanks for all the laughs!

That boat looks amazing. As much as I love seeing the ship being worked on this has been a nice change. How funny it would be if you won the competition 😂😂😂. Never miss a video that you put out. Keep up the amazing work you do.

I like that you've fitted an auxillary bracket. Most boats don't have them now. I've been told its because modern engines "don't break down" and yet I've had to tow a few back to the ramp with my old tinny. I've been a fan of Suzuki outboards for a few decades now. Good gear. Don't let having a smaller boat make you think you won't do well in her. I've won a few competitions in various events fishing out of boats under 15' while others were using 30 footers and couldn't turn a trick.

Suzuki - awesome & righteous company! Always loved their products way back into the late 60'''s.

I Love you guys. You work so hard, you get on so well, and there is real talent in those bones. I want to see you go fishing...

Now you’ve got to fish up a storm, normally you need to win some stuff to get this level of sponsorship, but your a good team to have on anyones side

that boat is gonna fly!

Get a nice noctua quiet fan and a finer intake filter that seals better. As more of a computer guy they do make a difference. You can even get magnetic filters that are quick change and clean. I use them for building cnc control units.

Happy for you project almost done

Well done dear friends well done. You should be proud of what you both have accomplished in rehabilitating that little boat (and the Sarinda too). God bless and keep you both well.

What a sharp looking boat, I absolutely love it.👏🍻

Very much a James Bond type boat now.

She looks like a real beauty. Now you just have to land something big, but for godsake. Dont say we are going to need a bigger boat😳😬🤣🤣

The boat looks awesome well done and good luck with your fishing 🎣 adventures

How nice is that boat! That’s the way to sort it. I see many of these looking very sad on people’s driveways. Also great zapping of the sticker, send some my way and I see how many ships I can get the on……….

Just remember with that Suzuki. You must break it in properly that is one of the best engines in the world.

Totally amazing. You guys have done a fantastic job on the boat it looks incredible. Congratulations on your sponsors and a massive welldone too you both on this awesome project.

Excellent video! What an achievement, not only the boat building but on the PR and sponsor side, that is enviable! Well done! Looking forward to seeing you catch that tuna...

The PERFECT motor for that boat! Suzuki 4 stroke 60 HP.

Look forward to welcoming you to Gunwharf Quays Marina.

One baaad boat right there! I really dig the horn. You should be able to catch Jaws now.😉👍

Well done

Congratulations you guys, Suzuki fishing team! The fishing boat looks great! Raring to go!

All you need now is to watch "Man's favourite Sport", a movie starring Rock Hudson and Paula Prentiss (For the fishing tips)🙂

I'm so happy for you guys, Hampshire 🇬🇧

Definitely THE coolest fishing boat !!

I have launched several new boats my latest yesterday one thing I loath at boat launches are the people who say "will it sink" grrrrrrrrrr spoiler alert they never do usually they have issues or faults but rarely serious. The one I launched yesterday was a sculling dory and its fault was the rowlock position I will move that 50mm aft. Great boat god bless her and all who sail in her :) and haven't modern outboards come a long way.

Nice having sponsors eh ?, Happy Fishing 🙂

When the boat is finished it will be able to tackle a round the world trip

Wow you guys are gettin' so so fersisitcated (u no wot I meen).... I mean " day-glo rubber bait ..... In my day it wuz up at the crack of dawn with a bucket an' fork diggin fer ragworms 😂😂 . The little ship looks awesome by the way.

you should think about a battery parallel switch so if one is low the other can assist

You, perhaps should have put a light grey tint on the windscreen and side screens, it would protect the polycarbonate and....that would have raised the WOW ! factor considerably.....It is not too late ! ! ! ! !

Great work! Just need to add a small solar panel to run the fan when your not on the boat to keep it fresh in there!

If the boat is tail heavy , put a 50 litre plastic tank ( the tanks are very strong and safe assuming its well mounted ) up the front mounted under the deck ,inside the cabin . Then you have a deck fill and the breather / overflow goes out through the side of the boat . I have done this to one of my boats , it made a big difference . It also made a difference to steering at low speed , no more side to side .

Top Job 🤘

I guess it's a good time to learn to fish and swim now? Outstanding presentation. Just love you guys and your joy of life and abilities.

realy nice boat, you guys have worked hard

Like the led fuse board great choice for when there no power to blown fuse.

I think it might help to reduce mold and musty odors in the cabin if you fitted a metal louver to the lower part of the cabin door. With all the work to be done on Sarinda, your 'Fishing and Tip Hauler' will sit closed up for long periods. To prevent the nasty growths from getting started, mix a cup of vinegar and a 1/2 cup of water with an 1/8th teaspoon tea tree oil. Spray all the hidden spaces where mold likes to grow...And, just my opinion, I think a 'faux' porthole in the top of the cabin door would look spiffy! Lastly, will the Sprogs be coming fishing, or will it be to intense for them?...

Suzuper video she’s looking grand.

Boat looks great a good pointer to how well you do your camper conversions anybody looking to get an RV conversion should give these guys a shout well done both love from Liverpool

Nice motor!

Will you be covering all the safety equipment and gear? Also, do you have a little backup motor in case the big one decides it wants a rest?

You could put a resistor inline with the fan to reduce the rpm and noise by a lot without losing much air flow, just get one of the right ohm and that can handle the wattage. Formulas to calculate the ohm´s is on line. You could get a variable resistor to control the speed of the fan but the higher wattage ones cost a lot more. I recommend conformal coating or similar to keep the batteries and cables under the sink from shorting as water will be in the vicinity.