Hi mate, I don't know weather you can help me. I'm really desperate. Need help on wiring up my ec9. Currently doing a b18c4 conversion n I'm stuck. Asked everyone for help but no ones helping. Happy to pay
@@twin2civicgaraget2cg75 any chance I could bring it to you? Happy to pay for your time. Fitted a rywire loom to the engine and demobilised the b18c4 ecu but can't get no crank. It's really hard to explain over message . Just desperate as it's been 4 years and still stuck
Hi, I do not work on other people's cars. Happy to offer advice though. If it does not crank, I would suspect the wiring to be at fault, the starter itself or if the engine was seized. I would start with turning over the engine by hand using a socket and bar on the crank pulley (remember these engine spin backwards.. so you need to turn the crank anti-clockwise). If that is fine, then I would check that the starter motor is getting battery Voltage, you can do this with a multimeter. If it is, but still does not crank, I would suspespect the starter itself. It might be worth tapping it with a copper head hammer to un stick it. Or it might need a new one. Hope this helps