T5 Transmission Swapped into a 75 year old Ford Truck | Pt. 1

Подписаться 3,2 млн

Просмотров 101 тыс.

50% 1

This week Davin tackles upgrading our 1946 Ford truck's transmission. This was a truck assembled in 4 days on the grounds of the Hershey Swap meet in 2015 and ever since the plan has been to upgrade to a T5. Well, six years later Davin finally found the time. Watch along as we take you through the process. We'll show you what it takes to do an upgrade like this, and worse case you might learn what not to do...
Thanks to our sponsor RockAuto.com. RockAuto.com is an auto parts retailer founded in 1999 by automotive engineers with two goals: Liberate information hidden behind the auto parts store counter (by listing all available parts, not just what one store stocks or one counter-person knows), and make auto parts affordable so vehicles of all ages can be kept reliable and fun to drive. Visit www.rockauto.com/?a=HG-YT-21Q3 to order auto parts online 24 hours a day, 7 days a week, and have them conveniently delivered to your door. Need help finding parts or placing an order? Visit our Help pages for further assistance!
Subscribe to our RU-vid channel for new videos every day! bit.ly/HagertyRU-vid
Visit our website for daily automotive news, cars stories, reviews, and opinion: www.hagerty.com/media
Stay up to date by signing up for our email newsletters here: www.hagerty.com/media/newslet...
Follow us on social media:
Facebook | / hagerty
Instagram | / hagerty
Twitter | / hagerty
If you love cars, you belong with us. Hagerty Drivers Club is the world’s largest community for automotive enthusiasts. Members enjoy valuable automotive discounts, exclusive events and experiences, roadside service created specifically for collector vehicles, and a subscription to the bimonthly Hagerty Drivers Club magazine. Join Hagerty Drivers Club here: www.hagerty.com/drivers-club
Like what you see? Watch our other series including:
Redline Rebuild | Engine Time-lapse videos from start to finish bit.ly/RedlineRebuild
Barn Find Hunter | Tom Cotter searches the country for abandoned cars bit.ly/BarnFIndHunter
Chip Foose Draws a Car | Reimagining popular cars with new designs bit.ly/HagertyChipFoose
Contact us:
Suggest and feedback - tips@hagerty.com
Press inquiries - press@hagerty.com
Partnership requests - partnerships@hagerty.com

Авто/Мото

Опубликовано:

7 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 118

@M4nHun73r Год назад

very helpful info here, i live in tc and cannot for the life of me find anyone who wants to work on a manual, so its nice to find videos like this.

@OMCbuilt 2 года назад

I have the same T5 in my '47 AeroSedan. Great solution for classic vehicles wanting more highway friendly cruising!

@jhoncho4x4 3 месяца назад

An old dishwasher also works well as a parts washer; just smaller. Those industrial parts washers use same wash methods; i have repaired / maintained them before. That's how i got the dishwasher / parts washer idea. Use a non suds soap / degreaser. Cascade works ok. Portable dishwasher on wheels, with sink connection and butcher block top is a nice find.

@konoctiswigwam8130 Месяц назад

I recently got a heated rotary parts washer from auction. I cleaned a T5 by hand and used etching primer and painted it with engine silver heat paint. I wish I had the parts washer when I did my T5, if you take everything apart it will clean small parts, gears, shafts, etc...The parts washer I got has a skimmer to remove oil and a heated element to get rid of the oil. It is 100% self contained. Does your old dishwasher do that?

@adubbelde1 2 года назад

You always mention to get out in the shop. A year ago I finally tackled the 37 Chev PU build that I bought from my aunt and uncle in 87. I had quit and stored it after a couple of major life events including the early death of my father who was working on it with me. Then this year I started suffering debilitating pain in my leg and had to quit. Fast forward a few months and I had surgery on my spine to correct a bulge pressing on my spinal nerve. I have to go through the rehab process for a couple of months before I can resume work but I'm looking forward to getting out in the shop. I'm putting a late model LT1 from a 2014 Silverado in it so strengthening the frame is paramount. Already have a Fatman MII front end installed.I'll have a 6L80E transmission.

@iangarcia2708 2 года назад

Just remembered the transmission I cleaned from a Lancer 1800GSR last year. It was a 4-speed manual and full of gunk and grime, and now it's working way more better and shifting smoothly. I guess I did a decent job

@itsaposcj5 2 года назад

Looking forward to the next installment. I am working on a T5 install into a 37 sedan, so perfect timing.

@daveevans7438 2 года назад

I was smiling when you were talking about the Chevelle crossmember. I had a 68 Chevelle in high school. I probably put three different 350 turbos in that car, they just wouldn't hold up. I remember underneath that thing sliding that crossmember up and down those frame rails many times.👍

@Paulster2 2 года назад

I did exactly what you're talking about with a 72 Chevelle, when I replaced a SBC 305/TH350 (not the original engine OR transmission ... came with 307/Powerglide which I'd changed out a few years before to get it back on the road) with a BBC 402/TH400 ... I just had to slide the cross member to different holes which were already in the frame rail. Surprised me, actually.

@daveevans7438 2 года назад

That 2 speed PG is a good tranny.... But the 400 was the way to go. Tail section was too long for drive shaft had to have it cut....

@korykimbrell8676 2 года назад

Very cool. I just did this in my 54 Chevrolet Sedan. A buddy of mine named Brian showed me how. He did it in the 90s. Before there were any adapters or cnc tables. Using junkyard parts and ingenuity. It makes the old 6 cylinder way more fun being able to stretch its legs. Making it from a weekend warrior. To a true daily driver. Keep up the great work. Very motivational and entertaining

@firebreathinggarage2117 2 года назад

Excellent video man, I really enjoy your time lapse vids, but this is more detail oriented. Thanks.

@markbenton4370 2 года назад

You do make it look so easy... Great show and very informative...

@valentemora2990 2 года назад

A relaxing video ..pure joy…love this

@buckshot6481 2 года назад

I know I'm old when I laugh at you feeling the need to explain how a speedo cable functions! 😂🤣

@bluejayfabrications2216 2 года назад

I liked this video purely because now I can go buy a new project car thanks Davin 👍

@sonyhk3824 2 года назад

Well done guys 👍, thanks Davin

@giancarlopbranco 2 года назад

Thank you Mr Davin! 😄👏🏻👏🏻👏🏻👏🏻

@dennisthompson7707 2 года назад

I have a different way to hold the engine up when I remove a transmission. I use a ratchet strap, I go over the frame rails under the oil pan and then ratchet it tight under the frame rails. I love watching all your projects and learn some tricks on my project even.

@txnetcop 2 года назад

Had one in my 66 Mustang T-5. Great trans...

@Amaysing79 2 года назад

Doing a 1950 ford pickup now. speedway makes it easy for the most part. Looking forward to the next video. Thanks.

@daledavies2334 6 месяцев назад

Use a ratchet strap over both frame rails and under the back of the engine. Hook on the lower inner part of the frame. Ratchet it tight and the vehicle can be moved if required.

@dennisd4452 2 года назад

Thanks for showing this. I have a '47 Ford pickup truck. Its a 2.5 ton with just about everything there from the factory. I want to keep my flathead v8 and do the same thing. T5 Trans.

@williamb2854 2 года назад

Good move !! I had a 69 Fastback..did the T5 swap. Easy to do... Also..the T5 is soooo much lighter...in weight. Great transmission. All the best....

@stephensmith3018 2 года назад

those bellhousing bolts are always in OMG tight!

@hamish2202 2 года назад

I love that truck a y block would be so nice in it but the flatheads also are nice both sound unique love them

@kyleforeman4543 2 года назад

Great context an video time lapse as usuall,,gotta luv the hammer time..lol. been their before..lol.

@grantottaviano7445 2 года назад

I’ve got too many projects, but I’ll get at it!

@larryok8156 2 года назад

Man you need a vacation!

@vettekid3326 2 года назад

Even back in the day when that truck was new many people had the same problem or just wanted to save money on gas and wear and tear on the engine added an aftermarket overdrive unit. They even marketed a two speed rear end for the model T cars and trucks called the Ruxton. The only problem then and now it's a pretty expensive proposition and the T5 defiantly is a much cheaper option but much more labor intensive. What I have also seen is the set up from a later model Ford car like a 1949-53 Borg Warner three speed with overdrive swapped in and a floor shifter adapted to the transmission.

@justaguy8347 2 года назад

I recently moved to Bullhead City from the Los Angeles/Ventura County area. I don't have a garage/shop here yet so I had to leave my 1940 Ford Deluxe Coupe and 1958 GMC 100 behind. So I don't have any car projects to do but plenty of house stuff to keep me busy.

@diegohoyos9709 Год назад

COMGRATULATIONS . . .GOOD . VERYYYYY GOOD MECHANICS 😉😘♥️💋

@WildBillFlysRC 2 года назад

This is a Great swap for the Y Block trucks up to 1964! John M has the bell housing for it. Great Video guys!

@normanselset8788 2 года назад

That upper right bellhousing bolt gave me trouble too. I ordered a cheap set of 1/2 drive impacts so I could modify one to use on my Ingersoll 1/2 inch drive impact. Then it came out!

@spewgilist 2 года назад

Good video relative to the transmission relative to installing it

@ronlynch7744 2 года назад

Cool, going to be 2 more gears for the old Ford. 😎👍🇨🇦

@JavierAGalli 2 года назад

peek a boo... nice red mini cooper out there!

@matlecomte 2 года назад

Get the housing vapor blasted!!

@elyeli6250 2 года назад

I need to start getting work into my np435 swap into my w100. I need to get the engine rebuilt. Then getting a new oil pickup for the oil pan. Then cutting the GM mounts off and welding Mopar ones back on. Wiring it. Dropping the engine in. Get the 44x12r17 wheels on. Axle flip. Rust work. Get heat/AC (maybe). Radio

@seththomas9105 2 года назад

Have wanted to do this with my 46 GMC since the 1980's

@johneastman1905 2 года назад

Another very attractive alternative is to install a Mitchell 26% Overdrive in the torch tube.

@andrewstoffel1170 2 года назад

Forgot to tell people to not remove the ‘plug’ to fill the tranny above the reverse light switch, it holds the reverse mechanism. If in doubt give it a clout 👍

@gapratt4955 2 года назад

Map gas torch is also handy as it is easier to grab in a moment as opposed to dragging the oxy acetylene out for small jobs.

@nucleargrizzly1776 2 года назад

The T5 and T6 are the LS of transmission swaps.

@edwardthayer9386 2 года назад

👑

@MrStacy1974 2 года назад

Buy a project he says; it'll be fun he says. 😒 I took his advice , now I'm bald from all of the head scratching and hair pulling. 🤣

@AcceleroOne 2 года назад

16:25 That's what happens when a gearbox drinks too much beer))

@71flatwindow 2 года назад

Always thought the ford t5s and chevys had different input shafts, definitely have to rethink retrofitting a t5 into my 41 gmc

@kennethnoble811 2 года назад

they do...sleeves are available so as to use Ford throw-out bearing and Ford clutch assembly and linkage on S10 5-speed

@71flatwindow 2 года назад

@@kennethnoble811 awesome! The old girl will be way more fun over 45/50mph

@moacirsilva4333 2 года назад

Aqui no Brasil Ford caverinha Gosto muito desse versão

@sethparrow04 2 года назад

You remind me of Paul Harrel. Same type of voice and speaking pattern, along with the looks

@stevefoster5822 Год назад

10:37 That's what she said!

@Friedbrain11 2 года назад

I had a T5 in my '88 S10 with the 2.5L Iron G=Duke 4cyl. engine. It had a mech. speedo , but used that POS hydraulic throwout assy. and I always wished it had been the old mech. version. It was a failure point that was almost unrepairable when it failed as it refused to bleed out properly. I finally traded in the S10 because of the hydraulic crap.

@jonstrande2074 2 года назад

I would like to see that thing vapor honed.

@THROTTLEPOWER 2 года назад

👍👍👍

@rambojambone4586 2 года назад

The way he jumped up into the cab to throw it in neutral he can get work in any shop in America.

@josephreisinger33 2 года назад

I know it's not the topic BUT WHAT'S WITH THE VW BEETLE IN THE SHOP?? Great video by the way.....

@lespeterson3426 2 года назад

I'm surprised you didn't go old-school all the way,just installing overdrive.

@jacobmoses3712 2 года назад

Overdrive units stopped getting fitted to American cars in the early 1960s. I'm sure a T5 was much easier to find

@DOCTRJ 2 года назад

Old gearbox looked beefier but i guess highway cruising is good in 5th

@user-tk2xm7td3i 2 года назад

я не понимаю английский, но мне нравится!

@minimoe2008 2 года назад

Any details on that red mini in the background?

@hippynurd 2 года назад

What was the music at like 5 minutes, I was really digging it. Can I use it on my videos too?

@bullast2046 2 года назад

Needed a much bigger Tanya Harding

@wrenbrighton2358 2 года назад

Im in the middle of doing the same swap but in a s10.

@jimclarke1108 2 года назад

91/2" that's a wopper

@choppedjunk 3 месяца назад

Who made the transmission crossmember? Where can I get it. I am in the middle of the same swap in my 48 F-1

@abdelhassand 7 месяцев назад

will the TKX adapt to this bell housing. will it adapt to a 1948?

@DOLPHINATOR9778 2 года назад

Awesome project. I have a T5 with a Dana 300 Transfer Case in my 86 CJ7 4.2L. It has two sets of numbers on the housing in two different spots. One is 13-52-066-915 and the second is 13-52-065-904. Is it a World-Class OR Non-World-Class? If someone can help with that I'll appreciate it. Also the Dana300 is leaking just a drop here and there from the drain plug I believe. I'm not really using it much AT ALL unfortunately. Any recommendations on weather it should be rebuild or?? If anyone out there has a suggestion. It sat for a few years in a garage. Thank you ahead of time.

@karimarkiza3451 2 года назад

hello hello super super super super super super vidéo👍👍👍👍🇨🇵🇨🇵🇨🇵🇨🇵🇨🇵

@demonic477 2 года назад

It's not rocket science to have and own a gas axe it's not expensive to get a starter kit and any local supplier can fill a set of tanks or rent a set to you for cheap . A good starter kit will run on average under 200 dollars for a decent one or 300 to 400 for a really good torch and gauges . the best way to do it is get a cheap set up and teach yourself to use it then later when you know what you want spend the money for a good rig. the most important thing is be safe there are a few simple rules to keep from blowing yourself up but as long as your not an idiot it's all good

@donnixon3528 2 года назад

What year is the truck The motor looks like an 8BA.

@c3dk 2 года назад

I did a T5WC in my 69 Corvette......

@allanherrera9549 Год назад

From what car is this transmission please ?

@andrepienaar6459 2 года назад

This has nothing to do with the project, but I see a lot of mechanical guys on youtube who wear their wedding rings while working. I don't know if you guys realize how dangerous this is. Your ring finger could get skinned by electrical tools or even get ripped off. I would never work wearing my wedding band/ring.

@MaxGiganteum Год назад

This is Machine Shop 101 type stuff... you learn it in the first day or two in junior high shop class. You remove all jewelry, wristbands, watches or anything in the way of clothing below the elbow joint. You also remove anything hanging from your neck and tie up any long hair so that nothing can get caught up in moving equipment. Speaking of clothing - no loose fitting shirts or pants and the recommendation on shirts is buttons or snaps so that your shirt can break away if worse comes to worse. I myself once saw a guy running a large LeBlond horizontal mill get his shirt tails caught up in a boring head and it was dragging him slowly in. Fortunately, the mill was set at 25 RPMs so he had time to rip open the shirt and spin out of it - naked from the waist up. Aside from the buttons missing, he could put the shirt back on AFTER he shut off the mill and unwound the shirt from the spindle and boring head. Damage? Shirt only. None to the guy or the machine... but think about what could have happened if the spindle was moving at a higher rate of speed. Say 300 RPMs. His shirt would have been violently ripped off his body after he slammed into the spindle. I seriously doubt he would have been unscathed. As it was, he continued working after finding some duct tape to keep his shirt closed! You can believe he tucked in his shirt every day after that too. As for me, I'll admit I didn't actually react to what I saw until about 10 seconds after he shut off the mill. I was like a deer, caught in the headlights standing on the platform of my own mill about 25 feet away... just watching that potential for disaster unfold. I finally got down and walked over to check on him along with a couple of other guys... we all got the jitters after a few minutes. I always thought it odd how that worked, you'd think it would happen immediately. Moral of the story here? Always practice good habits and think about what you're doing. The best way to prevent injury is to never be in a position to get injured. As has been said, an ounce of prevention is worth a pound of cure. Best wishes to all! - Max Giganteum

@frankschwartz7405 6 месяцев назад

>>Drain the transmission

@kurtpoblenz2741 2 года назад

Whatever happened to rebuilding the 440?? 🙁

@kinglayty5627 2 года назад

👍👍👍👍👍👍❤❤

@kenalexander5605 2 года назад

I thought Jeep used the t5 too, with the shifter farther forward, than Ford or gm t5.

@andymehl7994 2 года назад

The Jeep T-5, at least the one used in the 1982-1986 CJs uses the same forward position as the the S-10 trans. The difference is the Jeep unit is much shorter because it bolts to a Dana 300 transfer case.

@waynesmith7487 2 года назад

If you did the "relative to " drinking game on this video....you yisht mihht hab a ha TC d t>me typing.

@gregelliott8405 2 года назад

a good option for holding your engine up is a ratchet strap underneath the engine fastened to both of the frame rails on either side of it and then tighten it up

@fraud_hunter 2 года назад

cant be seized if it’s a liquid ! lol

@rustlebruxz0013 2 года назад

Aren't there issues with matching gearing for the speedo to read correctly? How do you adjust it for different gears in the rear end?

@stephenholland5930 2 года назад

Different teeth count on the output shaft drive gear.

@kennethnoble811 2 года назад

there are small gear sets for the mechanical "sending unit" available to sync speedo with rear gearing

@jimburns9674 2 года назад

Aren't those fuel pumps placed to close above the exhaust? Seems like that would really heat the incoming fuel. Hot Gasoline! Fire hazard? Hot fuel to the engine ???

@jamesdiehl8690 2 года назад

Bummer! You don't even want to drop anything on your foot, or break a finger! You're no fun! 😆 😆 😆 😆 😆

@j..2762 2 года назад

Дизлайки поставили мамкины механики.

@jamesdiehl8690 2 года назад

You actually need money to get a project, or work on one. Unless of course a person is rich like you! 😆 😀

@MrStacy1974 2 года назад

He's not rich or footing the bill lol

@jamesdiehl8690 2 года назад

@@MrStacy1974 Somebody is! 😀😃🙂🙃😊 It sure ain't me! I had a 56 F100 I wanted to restore for about 25 years. Had to finally sell it to pay regular bills! My project is gone and I'm 67, so I'm almost gone too! 😆 🤣

@MrStacy1974 2 года назад

I bought a mid 70's Datsun pickup with plans for a beater but it became a full on project after finding out it was built the same year and month I was born 🙄

@jamesdiehl8690 2 года назад

@@MrStacy1974 I ended up with a project whether I wanted to or not. My dad passed and left me his 99 S10 pickup. Only 54,000 on it right now! Vortec V6 FI 4.0 litre, auto, PS, AC, disc brakes front/drum really, long bed w/liner. I just rebuilt the front brakes; calipers, lines, pads and got shoes for the back, rebuilt the distributor, new plugs and wires, oil change, new battery. A project vehicle just so it can be driven. My 56 F100 was going to be driven too, but worth a lot more!

@MrStacy1974 2 года назад

@@jamesdiehl8690 as long as you don't have to depend on it as a daily driver, s10's can be relatively inexpensive and easy projects with good parts availability

@Obamaistoast2012 Год назад

Why?

@joeroad6618 2 года назад

Why does Davin look like he just crawled out of bed?

@donreinke5863 2 года назад

Why? I would have used a New Venture 4500, it will take a HELL of a lot more abuse than a dinky T-5

@jacobmoses3712 2 года назад

I think a T5 should be able to handle a flathead engine's output. It probably makes less power than the V6 it came behind from the factory

@donreinke5863 2 года назад

@@jacobmoses3712 A guy I know had an old Fox body Mustang with a naturally aspirated 302......long before the 5.0 Coyote We were always fixing the T5 in that thing, and Ive rebuilt a lot more of them in other vehicles. Take one apart sometime and compare the internal components to an NV4500, 5 speed ZF in Ford trucks, or old Muncie (or even the lighter duty Saginaw) , Ford top loader or Chrysler A-833 You will immediately see the difference.

@SB-vb8ch 2 года назад

Don't put a complete transmission into a parts cleaner unless you intend to completely disassemble it immediately afterwards....getting all of the water out of bushes & bearings is pretty much impossible in situ (that'll be capillary action). Very bad idea.

@dalemettee1147 2 года назад

As you were showing the linkage, I noticed the rubber boot that look like it needed to be replaced. Now that the update has been made, are you going to change out this boot?

@ekisaputra4295 2 года назад

Present Indonesia mekanik

@muhdhafiidz1206 2 года назад

I hope u paint the transmission

@NaveenKumar-oj7xh 2 года назад

Get some gloves man. Some of that gunk, grime and oil residue can be carcinogenic.

@MaxGiganteum Год назад

Not can be... ARE. Disposable latex gloves... pennies per pair. One of the best shop investments you'll ever make! - Max Giganteum

@mgunning7362 2 года назад

Its not a tailshaft its an EXTENSION HOUSING!

@ldnwholesale8552 2 года назад

Instead of rattling away get a long handle and crack the bolts manually. Th number of 'mechanics' of today who cannot work without impact wrenches. Yes I like them too but they are never as good as simple leverage. The parts washer was a fail,, it was no cleaner, just full of water!! Simple degreaser and pressure washer will always do a better job.