Tacoma BodyArmor Lo-Profile Bumper w/Winch Install How-To | Warn VR EVO 10-S | Factor55 Flatlink

Подписаться 6 тыс.

Просмотров 40 тыс.

50% 1

Today my 2019 Toyota Tacoma gets a huge upgrade, and I'm am going to show you how to install an aftermarket steel bumper and winch combo onto your 2016+ Toyota Tacomas, by Installing a BodyArmor4x4 HiLine Series Bumper, ‪@warnindustries‬ VR EVO 10-S Synthetic Winch, and ‪@Factor55‬ Black Flat Link.
👉 Parts Used In Video
►BodyArmor4x4 HiLine Tacoma Bumper: bit.ly/3bDvbfo
►Warn VR EVO 10S 10,000lb Winch: bit.ly/3dQpiyb
►Factor55 Black Flatlink: bit.ly/3dQMjRK
►LaminX Yellow Film: amzn.to/2NJG4UT
------------------------------------------
★Coupon Codes★
Code: HARLEY - 5% off at TheYotaGarage► bit.ly/3nMBpPc
★★★Build List ★★★
2019 Toyota Tacoma TRD Off-Road Cavalry Blue
-------------------------------------------------------
► F/ Bilstein 5100's: bit.ly/2YatEbJ
►OME 887" 2" Lift Springs: bit.ly/3bJSS4t
►R/Bilstein 5100's: bit.ly/2YatEbJ
►ICON 1.5" AAL (Add a Leaf): bit.ly/3cPAOWO
►Milestar Patagonia M/T (285/75R16 - 33X11.50): bit.ly/3kd84e7
► Method Bronze 701 Trail Series - 16X8: bit.ly/3eX9Kqo
►TRD Pro Style Grille w/ LED Lights: bit.ly/3aKLx3g
►WeaterhTech Dark Smoke RainGuards: bit.ly/3cSTLId
►WeatherTech Floor Liners: bit.ly/2VERWsE
►Tailgate Inserts
► Diode Dynamics SL1 Headlight Bulbs: bit.ly/2QENjLS
► Toyota Tacoma Baja Designs Amber Squadron Sport Fog Lights: bit.ly/3jmQHqW
►Smoked Sequential Mirror Turn Signals :
► DV8 Toyota Tacoma Roof Rack: bit.ly/3k6Yl9m
► RSI SmartCap for Tacoma: bit.ly/2SumFq1
►Cali Raised 43" Amber/White Dual Function Light Bar: bit.ly/3oINw0c
►Cali Raised Accessory Switch Panel: bit.ly/2UabW4R
►Baja Squadron w/Cali Raised Low Profile Ditch Brackets: bit.ly/2J3baEe
►Cali Raised LED 32" Lower Bumper Light: bit.ly/37hRJBA
►Kilmat 50ml 50sqft Sound Deadening: amzn.to/3hkl01C
►Sound Deadening Application Roller: amzn.to/3mT4tCU
►www.crutchfield.com/p_301X690....
►www.crutchfield.com/p_301X165....
►www.crutchfield.com/p_953PRX2....
►Probuilt/Cali Raised Tacoma Bed Stiffeners: bit.ly/3nnowKh
►TRD Off-Road Style Grille: bit.ly/39gIDFZ
►Tacoma AlphaRex Pro Series Jet Black Tail Lights: bit.ly/2YDyUDq
►BodyArmor4x4 HiLine Tacoma Bumper: bit.ly/3bDvbfo
►Warn VR EVO 10S 10,000lb Winch: bit.ly/3dQpiyb
►Factor55 Black Flatlink: bit.ly/3dQMjRK
►LaminX Yellow Film: amzn.to/2NJG4UT
00:00 Introduction | Overview
02:05 How to Install Front Bumper w/Winch on 2016+ Toyota Tacoma
13:50 How to Mount LED Lightbar onto Low Profile Bumper - Tacoma
14:10 How to Add LaminX film to Light Bar (yellow)
16:24 How to Attach Hawse Fairlead (Warn) to Bumper
17:01 How to Prep Warn Winch and Mounting onto Bumper
20:58 How to wire Warn Winch onto Truck
21:33 How to Install Factor55 Flatlink
22:17 Thanks for watching!
#toyotatacoma #offroad #warnwinch #bodyarmor4x4 #factor55

Авто/Мото

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 78

@MrThreePutt 3 года назад

Excellent and informative! Thanks for doing this video, you took the fear out of installing my BA bumper on my 2019 Taco! Thanks!

@modXELA 3 года назад

Thanks for the share, very helpful! Not removing the bumper makes sense and will save me time for sure.

@jonramer 3 года назад

Love your videos man. All of the detail is much appreciated.

@bloodstriper3649 3 года назад

Outstanding video/tutorial. I will be buying one of these bumpers for my 2021 TRD, yeah, baby!!👍👍👍

@gregfrommotown9082 3 года назад

Just bought the same stuff cept for light bar (4WDking) the best video on this installation... Thanks brother!!!

@ORMike 3 года назад

Your truck is looking really good. Love the color it’s one of my favorites. Also good video I appreciate it. Hoping to do mine in the newer future.

@GearheadJT 3 года назад

Thank you, I appreciate it!

@eliasbeas3556 2 года назад

Great video! I bought the same bumper and winch for my 2021 TRD Off Road Tacoma. However I have a question: Will the bumper/winch installation weigh down the front of my truck? Is there anything else that I have to do to compensate for the additional 100 pounds in the front? Thanks in advance!

@minkmendor9847 2 года назад

Hey man, Looks great!! QQ for you.... If the light bar is in there... how do I access the winch to get to the clutch and control panel??

@shawnquerze9909 3 года назад

Looks great! Had you kept your original led bar, would it have been visible and functional through the hybrid bull bar? Or, would it have been completely blocked making it useless?

@tacoma_jon 3 года назад

Nice install man. Looks good 🤙🏽

@GearheadJT 3 года назад

Thank You!

@julestrdprodjimavicpro2869 3 года назад

I have the same bumper but different set up! No Amber on this Taco! Nice Truck!

@sjmo2 2 года назад

Great video. I too have the Cali-raised behind the grill light, were you able to make this work with the bumper? If so, can you share any details?

@aa999xyz 3 года назад

if you use silicone on your hardware it's kinda like Loctite but removable especially great for off-road condition

@stephenchavez1 3 года назад

Awesome Video. I am doing this same install. Had a question at around your 21 min mark. Did you have to trim the bracket (a black center bracket between radiator and bumper) to allow for the control box on the warn winch?

@CLOVER_1219 Год назад

Ty for the video

@Pattyinthewoods 2 года назад

good video,looking to buy exact same setup for my taco, can you ruin the winch wire to the cabin and have it plugged in that way , or can you just use it wirelessly forever? how is the battery in the controler ?

@russellwood8750 3 года назад

Looks really nice good job however I’ll have to A much wider bumper giving me a little more protection as from experience it’s mostly decides I seem to hit and damage the plastic bumper it’s never had on but it does look nice I just don’t think it be very practical for me.

@merecumbe1000 Год назад

Thank you 🙏

@davidr.1517 2 года назад

Did the weather strip trim piece come with the bumper.?

@br00klyngreek13 3 года назад

awesome job my good man....just wish you showed how you wired the 20" light bar up and where you put your on/off switch

@davidr.1517 2 года назад

I have the same question but it looks like he hasn't been responding to any of our questions??

@julioli1168 Год назад

I wanted to see you demonstrate reaching down to the free spool lever and the winch remote cable connector. Once the front grill is back on, is the winch easily accessible?

@winmontero 2 года назад

Nice video

@whiteazn2 3 года назад

Does the steel bumper make your front go down due to weight?

@amaurycaraballo1254 2 года назад

@thetopalovic First of all, great video! I just bought the same bumper! My thing is, I have that same grill, how did you install the Pro amber lights on it!?

@dominica2765 3 года назад

Very well done nice truck be blessed

@GearheadJT 3 года назад

Thanks, you too!

@stacky512a 2 года назад

clean

@vegajrg6 3 года назад

Nice 👍

@davidyang1768 3 года назад

I'm planning on getting the same winch, do you know if having a dual battery setup is necessary? Great video btw!

@GearheadJT 3 года назад

I'm currently running it off of my single battery, without any issues!

@haroldbrown3452 3 года назад

took 2 hours total using this video as a guide. i also had to remove a light bar so that was 10 min or so.

@useryggfdcc 3 года назад

Is is easy / possible to remove the light bar after the bumper is installed on the vehicle? I'm waiting for the yellow film to mostly protect the lens cover.

@omargranados3349 Месяц назад

Watching this after installing mine makes me realize I missed a few parts

@alexhurtado4708 2 года назад

Looking to do the same set-up! How do you access the winch drum/controls?

@GearheadJT 2 года назад

when you pop the hood you can reach down behind the grille, easily accessible.

@Aarongill101 3 года назад

I'm about to do this install. Same bumper same winch. How's the truck driving after? The weight pretty noticeable?

@GearheadJT 3 года назад

Not a huge difference, I feel like I can slightly feel the weight while braking, nothing too crazy though.

@ZeroCoolStar 2 года назад

I love how none of the install videos for this bumper re-visit the side bold on the passenger side behind the flap after the cooler is pushed back. You know why? Because it can't be re-attached

@GearheadJT 2 года назад

That's right, sorry if it wasn't clear in the video. The side bolt holds the hard-line for the cooler in place, by moving the cooler back the provisions for the hardline don't line up anymore with the OEM location, and this will be the reality with all bumpers or mods which require moving/relocation the cooler.

@Pew_pewchronicles 5 месяцев назад

How do you access the winch remote outlet looks like no room anywhere

@GearheadJT 5 месяцев назад

You can reach down behind the grille and access it.

@kronos880 3 года назад

warn describes the winch alone at 91lbs. so your steel bumper and added light weigh 9lbs? that's amazing! but it must be super light gauge or filled with helium? please what are your secrets?

@GearheadJT 3 года назад

I also weighed the winch and bumper separate, if I remember correctly the winch weighed 48lb and bumper 64ish lb's.

@apexdemond554 3 года назад

What light bar did you use?

@jnkM-yc8ot 3 года назад

Ya what light bar and size?..

@cmoney8280 3 года назад

Any rust issues on the bumper?

@GearheadJT 3 года назад

None so far, it's been great. We'll see how it holds up in the utah winters.

@Ww8.3 3 года назад

Looks good but I’d get sliders before bumpers

@GearheadJT 3 года назад

Sliders will be here today! Just waiting for the delivery truck.

@juanrodrigoramirez6428 2 года назад

What size led bar fits on the bumper?

@CodyVella 10 месяцев назад

20” or slightly bigger

@tls5669 2 года назад

No install that involves hacking your truck up is simple, is there a bumper out there where no cutting is involved?

@MukulKumarIIT 3 года назад

How do you access the winch remote wire receptacle once the winch is inside?

@GearheadJT 3 года назад

With the hood open, you can access it by reaching down between the grille and radiator.

@cmoney8280 3 года назад

Winch also has wireless remote option

@christophermartinez5314 3 года назад

Great bumper

@GearheadJT 3 года назад

Thank you, I'm loving it!

@mshd7313 3 года назад

How did you black out the front emblem? Does that affect the tss?

@GearheadJT 3 года назад

Used the same vinyl from my wrap - it doesn't affect the TSS!

@mshd7313 3 года назад

@@GearheadJT looks nice! You should make a video about it? Can you link me to the vinyl you used ?

@haroldbrown3452 3 года назад

if no winch is added, do you still have to relocate the cooler?

@whiteazn2 3 года назад

Yes

@haroldbrown3452 3 года назад

@@whiteazn2 thanks. great video, will be doing mine on thursday using guide from this video

@darthvader1482 3 года назад

Who won the taillight giveaway? Did you forget about the giveaway or something?

@GearheadJT 3 года назад

It’s still active for a few more days!

@darthvader1482 3 года назад

@@GearheadJT Aight! Thank you sir!

@blcdad 3 года назад

Nice video but you need to check the links where you have : "★★★Build List ★★★ 2019 Toyota Tacoma TRD Off-Road Cavalry Blue" None of the links here seem to work.

@SDMTB14 3 года назад

Do you know the weight of the bumper alone?

@GearheadJT 3 года назад

It came in around 60-65 lbs

@CodyVella 10 месяцев назад

It is actually closer to 80

@406Campr 3 года назад

That has to be the ugliest cut I have seen on RU-vid. But you made it work, proved that it can be done, and took the fear out of cutting the bumper. Well done. Looks great!

@scotthughes5950 3 года назад

Why does everyone want to cut so much of the bumper off. I am all about Victory 4x4. Minimal to zero cutting.

@GearheadJT 3 года назад

Unfortunately with the majority of bumper designs cutting is inevitable, whereas the Victory Blitz Bumper Sits over the front bumper like a cap.

@RAILGUY140 3 года назад

For safety sake ,,, disconnect the battery while doing this install ,,,, the last thing you want is a airbag going off !!!

@gabrielreyes8476 Год назад

Putting this on but going with the HF Badlands 12k Apex. Warn used to be the standard. Now, they're just overpriced and Badlands is just as good if not better and for half the cost to boot. Nicecwork. Looks good