We take a second to touch on clutching and more so on what belts we have had the best success with. We are also doing a GIVEAWAY for 2 Gboost Technology Belts!!
Rules To ENTER Giveaway: Contest is only on our Facebook Page. So head over to get entered!
1. Like and Follow Gboost Technology
2. Like and Follow SlikRok Productions
3. Tag at least one buddy in the comments below and take a second to thank GBoost for sponsoring the giveaway!
www.gboosttechnology.com
Sand Storm Belt Line
•Next Generation high-twist Aramid Fiber cord for HIGH HORSEPOWER TENSILE LOAD requirements.
•Bottom cog/tooth design is impregnated with short Aramid Fibers for better belt-to-sheave adhesion and reduced overall belt temperature.
•Latest bottom cog design for greater rotational efficiency.
•Encapsulated Aramid Fibers in cord to increase rotational strength and lower overall cord friction.
•Precision ground sidewall angle (SCUFFING) for smooth engagement, increased power transfer and lower operating belt temperature.
•Aramid Fiber cord versus polyester, wraps over bottom cogs for stronger bottom cog strength.
•Increased cord pop-out resistance.
•Increased TOP COG pressure load design that increases sidewall rigidity, prevents top cog bowing, but allows for increased rotational flexibility.
•Our goal was for this belt to handle up to 400hp and we hit that goal!
•This belt has come a long way and now we sell it all over the world. Not just for the Dunes-This belt has raised the bar for all drive belts.
EX Belt Line
•Ultra-strong Aramid Fiber cord that can handle/carry more than 10,000 pounds of tension without stretching or breaking.
•Higher strength compared to OEM and aftermarket drive belts.
•EX belts have been developed with a high-temperature compound called DUMAX for added strength, flexibility, and heat resistance which in turn means you can squeeze our belts a lot harder for more tuning possibilities and less slippage.
•Maximum under-cord stiffness allows the belt to flex for rotational efficiency and running cooler temperatures
•Built for high temps, extreme abuse, and excessive shock load.
SD and Cheap Ass Belt Lines
•Comparable to OEM or just above for cord strength construction and quality
•Higher temperature compound which means it can handle a bit more heat!
•These belt lines are based on the price point market, so we like to emphasize Cheap not Junk!
6 сен 2024
