No video :(

Tamiya Rock Socker CR-01 Step 12 Checking the RC Equipment

Подписаться 737

50% 1

Hi RC Enthusiasts
Welcome to my channel and thank you for taking the time to view this video.
This is the Tamiya Rock Socker on Tamiya's answer to a crawler chassis. This awesome model comes as standard with a 540 size motor, a single speed centre gearbox, the ability to choose to have locked / unlocked front & rear axle differentials, front & rear barrel spring, with separate oil shock absorbers, metal chassis rails, four link front and rear chassis links, soft tires and detailed plastic bead lock wheels, the ability to choose to have the optional four wheel steering option, part ball bearing and part metal bearings and a highly detailed polycarbonate body.
If you would like to see the previous steps of the build, please visit:
1. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Chassis Unboxing
2. • Video - Tamiya Rock Socker CR-01 Chassis Introduction
3. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Link Mounts
4. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 2 Attaching the Link Mounts
5. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 3 Mechanism Deck
6. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 4 Ladder Frame
7. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 5 Differential Gear
8. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 6 Drive Shaft
9. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 7 Axle Housing
10. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 8 Attaching Suspension Mount
11. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 9 Coil Spring Mount
12. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Steps 10 and 11 Attaching Front and Rear Uprights
If you liked my video, please do consider subscribing to my channel, this really helps my channel. I always appreciate the support of fellow RC enthusiasts. Keep well and all the best to you. See you again soon.

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@SevenWelt 6 месяцев назад

Hello, Very interesting again!👍 Have a nice day!🍀 Greetings Seven🖖

@JF-RC 6 месяцев назад

Hi Seven, thank you for watching and leaving me a nice comment. Best wishes 😎😉😊

@maxmixrc 6 месяцев назад

Great build video, nice checking my friend 😊👍💯

@JF-RC 6 месяцев назад

Hi Max, thank you for watching, appreciate you stopping by. Best wishes 😎😉😊

@HaydadRC 6 месяцев назад

Excellent proactive check of the electronics before installation John! Glad you’re going for the 4ws!👍😊

@JF-RC 6 месяцев назад

Hi Jeremy, thank you for watching and leaving me a nice comment. Oh yes, I’ve been intrigued with the 4WS option and how it works, so thought this was the perfect chassis for me to test this option. Best wishes to you and the family 😎😉😊

@countrycrawlers4713 6 месяцев назад

Great build as usual! Best wishes to you and your family!

@JF-RC 6 месяцев назад

Hi, thank you for watching and leaving me a nice comment. Best wishes to you and the family too😎😉😊

@rcdave47piges 6 месяцев назад

Hi John great build

@JF-RC 6 месяцев назад

Hi Dave, thank you for watching and leaving me a nice comment. Best wishes 😎😉😊

@G9RCCar 6 месяцев назад

Great job, my friend.

@JF-RC 6 месяцев назад

Hi, thank you for watching and leaving me a nice comment. Best wishes 😎😉😊

@G9RCCar 6 месяцев назад

@@JF-RC no problem bro

@AdventureTimeRC 6 месяцев назад

Good stuff John I did a lot of modifications to my steering I have a aluminum servo arm on it now trimmed a few bits and got a good bit more steering

@JF-RC 6 месяцев назад

Hi Brent, thank you for watching and leaving me a nice comment and great advice. I will check out how you did that modification. Best wishes 😎😉😊

@RallyandTrail 6 месяцев назад

Nice one mate 😎 Getting close now 👍🏁

@JF-RC 6 месяцев назад

Hi, thank you for watching and leaving me a nice comment. Best wishes 😎😉😊

@RcNickster709 6 месяцев назад

Nicely done John. AnImportant part of the process for sure. Once again watching while I work On my own rig. :)

@JF-RC 6 месяцев назад

Hi Nick, thank you for watching whilst you work 😎😉😊 best wishes 😊😉

@MarkBryanRC 6 месяцев назад

Oooh John, those sprigs are hard to get onto the servo saver! Funnily enough I just fitted one of those to my XV01. And centering the servos is definitely an essential step! Good work my friend, I hope all is well - cheers! 🍺😎👍

@JF-RC 6 месяцев назад

Hi Mark, thank you for watching and leaving me a wonderful comment. Oh yes, certainly had some sore fingers getting the servo saver springs into place 😩👍but, got there in the end. Getting that servo just right is essential, I’ve had to go back sometimes to make sure I did it though, sometime forget this step, which turns out to be some hassle on some chassis 😂😊😉take care and best wishes to you all 🍾😉😊😎

@Fortes_RC_Adv 6 месяцев назад

Almost done💪😉

@JF-RC 6 месяцев назад

Hi, thank you for watching and leaving me a nice comment. Best wishes 😎😉😊

@JoevsRc 6 месяцев назад

This is a very important step . Nothing like having to pull the servo out after it was installed because i forgot to center the steering servo LOL

@JF-RC 6 месяцев назад

Hey Joe, thank you for watching, appreciate you stopping by. Oh yes, I certainly didn’t want to be doing this task twice, that’s for sure. Best wishes 😎😉😊

@RCBirds 6 месяцев назад

Great job John. Great you're you going for the 4WS version

@JF-RC 6 месяцев назад

Hi Dirk, thank you for watching and leaving me a nice comment. I had to go 4WS, just so intrigued with how this setup behaves on a crawler / trailing RC. Best wishes to you and the family 😎😉😊

@mikesrcgarage 5 месяцев назад

Nice John I dont get along with servo savers... Lol! AWS is too cool! And if you put the servo saver up front you should be good! Very nice buddy, all the best to you and yours buddy! ✌🏼😎👍🏼

@JF-RC 5 месяцев назад

Hey Mike, thank you so much for watching and the great advice. Also welcome great knowledge from super guys like yourself. I really like this Rock Socker. Best wishes to you and the family 😉😊😎

@mikesrcgarage 5 месяцев назад

@@JF-RC Always welcome buddy and thank you! 🙏🏼🙌🏼🌞

@MauzyrockRC 6 месяцев назад

I have not yet ventured into the double servo vehicles...Interesting to see how folks center the servos. I usually fit a horn on temporarily, trim it, rinse repeat until I am satisfied, which usually minimizes trimming after install. Cheers

@JF-RC 6 месяцев назад

Hi Mauzy, thank you for watching and leaving me some great advice. Best wishes 😎😉😊

@sparetimerc 6 месяцев назад

Hey John, that Servo saver seems to be a very strong one. Do you think you can install the other servo without a servo saver? The build is coming along. I can't wait to see this completed and on its first run 👍👍 Take care and best wishes to you and the family 💯💯💯

@JF-RC 6 месяцев назад

Hi Al, thank you for watching and leaving me a great question. The front servo saver is the high torque servo saver, and boy it’s a tough one to install. The rear servo saver is one that I’ve had in the parts supplies and as it’s on the rear, not necessary to have the high torque saver. Best wishes to you and the family 😎😉😊

@FastFreddyRC 6 месяцев назад

I like how I'm seeing the metal servo saver setup! Definitely makes sense for a vehicle like this and I'm glad you're doing the 4WS option. Question...what's the tire compound like on this one? As it's designed to be a crawler just wondering if the tires are nice and soft.

@JF-RC 6 месяцев назад

Hi Freddy, that you for watching and leaving me a good question. The tyres are reasonably soft, perhaps not as soft and stickers as other crawler tyres, but I think they will be okay. I think if you’re going to do serious rock crawling, perhaps a change of tyres will be necessary. Best wishes my friend. 😊😎😉