Тёмный

TapeTech MudRunner 

Pro Plaster Products
Подписаться 1 тыс.
Просмотров 66 тыс.
50% 1

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 12   
@kennethwilliams7731
@kennethwilliams7731 7 лет назад
It took me quite a while to relax and get comfortable with this tool. At first I was tense and applying to much pressure.My first few houses left much to be desired,but I stuck with it and finally the touch came to me and now its one of my favorite tools.I actually enjoy running angles with my mudrunner. You must be patient and not expect to run angles like a pro immediately, but if you stick with it,it will come.
@kennethwilliams7731
@kennethwilliams7731 7 лет назад
Something that should be obvious that I had to learn was to relax the twisting motion as you approach an opposing angle and let the mud that's in the angle head deplete and finish out the angle,other wise you'll load up excessive mud and it will make a mess by dropping onto the wall and splat onto the floor. I have found that thin mud as you would use in your bazooka for taping ,works best for angles as well. If it doesn't squirt easily out of the mudrunner that your gonna end up fighting it and having poor results.
@Chicago_Clout
@Chicago_Clout 2 года назад
This is the answer to all my problems.
@truthbold
@truthbold Год назад
Can i reah a 10 foot ceiling with the mud runner?
@DoctorDrywallLatinoAmerica
@DoctorDrywallLatinoAmerica 2 года назад
When was the mud runner released to public?
@mermiss
@mermiss 6 лет назад
Hang in there Boris! You're not useless.
@MegaManMayCry
@MegaManMayCry 4 года назад
So do you have to keep turning the handle for the mud to come out?
@stevehannah8162
@stevehannah8162 2 года назад
Is this from 1983
@nbco55
@nbco55 Год назад
Lol...
@loreec90
@loreec90 4 месяца назад
This mudrunner sucks, it will crown the angle. The mud is forced out at a higher pressure, it’s compressed by the angle head blades and expands . You can put a 6” knife on angle after it’s dry and see the crown and daylight going into angle. Which was not acceptable on commercial smoothwall. It’s cumbersome also, no one in our company liked them and they were discontinued being used
@DeLuca101
@DeLuca101 2 года назад
Its a pain in the ass to use
Далее
Tuto bazooka tapetech, level5...
14:12
Просмотров 43 тыс.
How to use drywall flat boxes
13:46
Просмотров 35 тыс.
This is how Halo felt as a kid 🤣 (phelan.davies)
00:14
THE MUDRUNNER UP CLOSE AND PERSONAL
8:50
Просмотров 34 тыс.
You'll never sand JOINT COMPOUND again!!!
7:07
Просмотров 609 тыс.
Mud Shot vs Mudrunner
16:03
Просмотров 31 тыс.
Taping Drywall Corners With Compound Tube
16:51
Просмотров 49 тыс.
Can-Am Semi-Auto GoldCor Pro Kit
10:24
Просмотров 8 тыс.
Plasterboard HACK | Every DIY'er Should Know
11:29
Просмотров 714 тыс.