Taranis X9D: How To Completely Reset (when its FUBAR) 

wow exactly 4 years ago and this is what I needed

You have helped me a lot, thankyou for your time and effort.

Still helping me out Bruh, RIP

Rip brother .. I always come back to your videos

Hello ,possible connect TARANIS X9D with DEVICT AUTOPILOT g2.0 www.devict.com/sonar-fish-finder.html i tried to connect it many times but without any success.it is possible the rc.telemetry taranis x9d work with DEVICT AUTOPILOT g2.0

HELP i have a Taranis x9d plus and none of the switches are coming up like i cant even set them to channels or anything i can have them done when i turn it on and i dont get a warning someone please help i have tried what you did and it didnt change anything

I still have the vibration with no screen, I deleted all the files and tried this but it didn't work. The reason this happened because I was trying to update my firmware and somehow messed it up. Plz help

so I erased all the folders on the SD card by accident and now I can't put back the images or sounds on the SD card. can you help?

Hello, I have a new x9d+ and want to use S6r receiver. I have a bind and S6r is working in auto level mode. I can't change to gyro or off mode. Firmware is frsky 2.1.6.

Do you know a way to reset the Taranis X9D+ to factory defaults? I have been trying: 1. Remove and format the micro sd card from the Transmitter. 2. turn on and browse to "Reset to factory defaults" 3. Take apart the transmitter and remove the CR1220 lithium battery ..Still, not factory defaults. As soon as I turn it on, there's my splash screen - still there. I've tried this 4 times now, each time in different order. Nothing will reset it. Is ther esome sort of internal jumper to do it? Or a memory chip I need to replace? I'd rather keep my x9d than buy a new one.

Mine wont even pop up or connect to windows. Weather i plug it in or not it doesnt register in windows. No one goes over how to connect it to my PC. I feel like I need a driver.

I did everything you said from this video and I get this message item not found... this is no longer located in the file I created to download the website

your still helping me ,god bless you x

Frsky really needs to ship all radios with an SD card so it's not so confusing for newcomers that have never updated or messed with their radio.. I bought the x9d special edition plus 2019 model and even my $300 radio didn't come with an SD card and thats pretty crappy on frsky's part.. I have lost track of the amount of ppl I have had to help fix their radio because they tried updating the firmware and thought they bricked their brand new radios.. great job frsky...

I tried this and still no working tx.I had a good working x9d+,but had only used it to set-up a couple of mini skyhunters for some fpv flying.I had them all set-up using just the tx,but wanted to learn about Open TX.Somewhere in the process while trying to go to Bootloader mode,the tx just starting vibrating and the screen instead of blue was gray with nothing on it,just the gray snow.I thought I didn't have tx connected to laptop while trying to enter bootloader,but now I'm not really sure,they may have been connected.Now after trying this method,which I already tried,but tried again,my tx won't do anything when switched on,acts like no battery is in it.I tried a different battery and a different sd card and still nothing.Who works on the x9d+ in the US,anyone,or should I look for another tx?Love your vids,they are easy to understand for me.Thanks!

Bought an X7 that came with my Arris x220, I assume it was pre-bound. I also got a tiny hawk too without a controller. So when they arrived I decided to skip the x220 and try to bind the tiny hawk two freestyle. Long story short I think I deleted the X2 20 and now I have control over either one, please help me

My Taranis will not go into bootloader by pressing the buttons in and turning it on at the same time, so I went to old school stuff. I burnt new firmware and now its bricked!

Still doing the business and helping people all around the Globe, including me, RIP

Mine is brand new. When hold two trims to center and turn on as shown, screen comes on but blank. Shutting off power does nothing. Can only shut off by pulling battery.

What if Your Taranis won't connect to windows 7? Also, you can't see the Two drive ? Please Help

I recently had the problem on my taranis qx7 when I installed the wrong firmware. My qx7 would show just plain white screen and vibrates until it turns off on its own after a while. I can hear the warning voice though for the switches. I tried reflashing with different versions but always failing and giving me error message " New firmware is not compatible with the one currently installed ". I fixed it by unchecking the box that says " Check Hardware compatibility " before flashing. Last thing to do is reset qx7 to factory. Now my Qx7 is alive again. :)

Hi Believe it or not only got my Taranis today followed your video's in sequence all good,then when trying to load a new model gone pear shaped. Instead of giving me picture option of model i get Script syntax error wizard.lug:72 attempt to call field 'lock'(a nil value) Gutted as have not even connected my first drone Thanks in advance for any advise Nick

I think I may have broken my taranis, I tried to update the firmware by deleting a load of files and drag dropping the new ones over now my controller won't connect to my computer!!! Please help.

I just bought the Tara is xd9 had for a couple of weeks put on charge and now all it does is flash blue screen and emit clicks is there a simple fault to fix before I send it back, thx, wez

My Taranis plus is completely dead. I tried to upgrade the firmware. I can't get into bootloader mode?

Project Blue, I can not seem to get my Taranis to show up as a controller, only as a mass storage device. I have tried changing drivers, and using defuser to remove DFU mode. Any tips?

Will this also reset any settings I've might have made on the Taranis? For som reason I can bind to my X4R but it shows no stick response in KISS GUI and I can't arm the darn thing..

This is useful, just got a used one of these with models still loaded on it, I wanna reset and start a fresh.

Thanks man

G'Day mate having a bit of a problem with the tranis keep getting error msg no bit maps on sd card but the files are bmp ?

thank you so much :)

Thank you so much for the videos. I got everything working just like you explained. It downloads through the computer, all sounds work but now it won't work with my simulator (Freerider) any suggestions?

hey dude, I accidentally format the sd card, and everything is gone. can you help me please?

i installed once excitedly a noplus firmware on my x9d plus -> no screen, feedback motor going wild.

my bind function don't make beeping sound on bind mode..I remember it was working when I just got it. something I did?

Using windows 7, When I use the three finger salute and connect to windows. I will not see the two drives in windows.

RIP

:(💔 RIP

so what do you do if three finger solute does nothing

ok this is what I did I went to betaflight and had my taranis 9+ hooked up I thought that I had to flash the firmware from that site onto my taranis when I did that the screen went black and no amout of flashing from opentx companion has been able to bring it back please help if you know how

i can't connect to my pc at all! it was working well after i F up some thing during the process. Help needed!

Still coming to this page for information.

Hi. Thanks for your video, it's cute! But after done everything, now all my receivers are not pairing with my Taranis Plus. (the day before were working ok) My receiver are D4R-II and X6R, X8R and X4R. After trying some other firmware, they don't go either. And finally try a DJT ext module and if the D4R-II receiver works. How can I bind it back again? Thanks in advance.

Mines wont load into bootloader

THANK YOU I LITERALLY THOUGHT I HAD BROKE MY TX

I Had the vibrate and bright white screen,now I get the open tx splash screen and throttle and switch warnings,when I press any button to clear the warnings I only get a constant fast beeping.Any suggestions?

hi love your videos. I recently tried to flash the FW and bootloader and afterwards the Taranis X9D plus would not even power up. Have you come across this and have any idea how to fix the problem?

First of all greats tutorials keep it up, anyways quick question, did everything upgraded the firmware, bootlegger,... so on the control is working super fine, but now for some reason when creating a model the at the beginning when you see the for models picture for plane, heli, wing and quad the heli one is missing, like I said the x9d is working super fine not gonna use the heli one but just wondering, thanks bro and great content.

Dude your radio works how is this helping?

Still relevant

Minds all brand new and I screwed up and I tried everything you said to do and mind still screw it up it just will not work I'm thinking about trashing it. Not even you could fix it.