Тёмный

Teardown of VESSEL 3-Speed Electric Ball Grip Screwdriver 220USB-P1: Why so much bit wobble? 

bzeug
Подписаться 16 тыс.
Просмотров 19 тыс.
50% 1

linktr.ee/bzeug for Instagram, Amazon store and more
www.amazon.com/shop/bzeug
Amazon Japan Affiliate Link: amzn.to/3QW8I3y
Fujiya orange handle needle nose pliers: amzn.to/3LMPGJE
VESSEL JAWS bit: amzn.to/3Chr5qx
VESSEL Tapping bit: amzn.to/3rM7Ro0
VESSEL Giza bit: amzn.to/3SPpMWT
VESSEL PROKON slender: amzn.to/3rEkeCP
VESSEL MAGNUM Plastic spring bit (blue): amzn.to/3RLip1p
VESSEL MAGNUM Plastic spring bit (red): amzn.to/3SR7HI4
VESSEL PROKON Sakisubo bit: amzn.to/3fUz1Xa
VESSEL Cushion Ring twist drill bits: amzn.to/3EB7fJw
VESSEL Ultra Hex bit: amzn.to/3eofoGB
VESSEL Prokon Sakisubo bits: amzn.to/3ThWKQD
VESSEL Prokon Sakisubo Double Ended bits: amzn.to/3ccHjs7
VESSEL Prokon TORX: amzn.to/3PEmCmr
VESSEL Prokon HEX bits: amzn.to/3R3gQfr
VESSEL Prokon combi blade set with ball grip handle: amzn.to/3wjSENS
VESSEL Magnum (Blue) double ended bits: amzn.to/3c9RUE9
VESSEL Magnum (Red) bits: amzn.to/3dNdoY1
VESSEL Black Laser bits: amzn.to/3pwUmHJ
VESSEL Terminal bits: amzn.to/3CBYs9B
VESSEL Insulated bits: amzn.to/3py2bwZ
VESSEL GOSAI Torx bits: amzn.to/3T0ntRz
VESSEL GOSAI up to 300mm long: amzn.to/3ClpgL5
VESSEL GOSAI up to size 4: amzn.to/3Cm2nqL
VESSEL IRO bit: amzn.to/3dMmfsT
VESSEL Gold Combi bits: amzn.to/3QGLzir
VESSEL Gold Combi with magnetic holder: amzn.to/3PDv7y8
VESSEL GIZA bits: amzn.to/3AaPZHw
VESSEL GOSAI Combi bits: amzn.to/3T9gCVJ
VESSEL Magnets: amzn.to/3wH0Hoj
Amazon USA affiliate links below, also see my store page: amzn.to/3CNd30K
Fujiya orange handle needle nose pliers: amzn.to/3LMPGJE
VESSEL plastic spring neck torsion bit (fits USA power tools): amzn.to/3Mln21i
VESSEL Jawsfit screwdriver: amzn.to/3rJf60i
VESSEL PROKON Sakisubo bit: amzn.to/3EHkK98
VESSEL Impact ball set: amzn.to/3pB37Ro
VESSEL bit with red plastic spring: amzn.to/3T5wJDN
VESSEL bit with reduced shank: amzn.to/3K7hMgy
VESSEL PROKON Sakisubo bit: amzn.to/3EHkK98
VESSEL PROKON Sakisubo bit 150mm: amzn.to/3ucSzdr
VESSEL GOSAI hex key bits: amzn.to/3FdD4IC
VESSEL GOSAI bit set: amzn.to/3AX84dk
VESSEL GOSAI bit set with double ended bits: amzn.to/3UfS4dg
Wera reduced shank #2 152mm bit from KCTool: bit.ly/3wxgC8U
Wera reduced shank #2 50mm bit from KCTool: bit.ly/39KxMac
Wera reduced shank #2 152mm bit from Amazon: amzn.to/3lxEini
Wera reduced shank #2 50mm bit from Amazon (pack of 10): amzn.to/3LBlfmL
Wera store on Amazon Japan: amzn.to/3UN6gva
TOP "adapter" shown: amzn.to/3G6qJV8
ANEX bit extensions: amzn.to/3lwOtZh
VESSEL bits #2 size: amzn.to/3G7gtMy
VESSEL bits #1 size: amzn.to/3GeJxSs
#tools #werkzeug #vessel
Chapters:
00:00 Intro
00:14 General Features
01:08 Bit Wobble
02:15 Teardown
06:26 Measurements of bushing
07:17 The battery
07:37 Reassembly
11:20 Torque
13:22 Bit fitment
14:49 MFG claims on the box
15:30 Conclusion

Хобби

Опубликовано:

 

8 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 57   
@johnf4085
@johnf4085 2 дня назад
These are really good for electronics. I work in a repair shop of sorts and I have one at every bench. And I keep a keychain on my personal one with some bit holders for commonly used bits.
@DDB168
@DDB168 10 месяцев назад
Great job getting it back together. Very interesting to see the inside of it.
@nriyo3
@nriyo3 10 месяцев назад
I was bummed the cell was not Japanese made. Nice teardown.
@Doc1985
@Doc1985 10 месяцев назад
Your mechanical skills are impressive--well done!
@naezro
@naezro 10 месяцев назад
Really glad you did a tear down. I was really concerned about the durability of mine because I have the same amount of wobble. So far I've daily driven this for work in lighting maintenance for over a month. I'm careful not to over torque it on stuck fasteners and I've dropped it a couple of times. It's worked out great for me, I always run in to really long machine screws and the clutch always sets them in perfect.
@MrBobWareham
@MrBobWareham 2 месяца назад
Thanks so much for the teardown most interesting, so you just saved my pocket I was going to buy one, but it's all too small, and I don't think it will have a long life! Well done in getting it all back, but I don't think you will stop the wobble as the front has only plastic.
@mumbles1justin
@mumbles1justin 10 месяцев назад
I have 4 of theses 220 plus. I keep one in each of my tool bags and have used them daily for about 3 month now. I haven’t had any issues with any of them. But after seeing the wobble in the video I went and checked all of them. They all do have a slight wobble on the collet but theres not much if any on the shafts. The bits them selves do have very slight movement.
@UnhumanNewman
@UnhumanNewman 9 месяцев назад
What style bits do you use in them? The intended Japanese style or the type most commonly found in America?
@mumbles1justin
@mumbles1justin 9 месяцев назад
@@UnhumanNewman Both. I have custom spacers and a custom bit holder.
@RANDOMNATION907
@RANDOMNATION907 10 месяцев назад
"The Algorithm" . . has been recommending these Vessel ball grip drivers to me for a solid week. So, I thought I'd watch one. It turned out to be this one. I've never watched your videos before. I'm intrigued enough to follow your YT channel and Amazon affiliate link. You appear to review some items of interest to me. Thank you for being a content creator. Greetings from the great state of Alaska.
@bzeug
@bzeug 10 месяцев назад
Thank you. I appreciate the feedback.
@Heizenberg32
@Heizenberg32 10 месяцев назад
Thanks, this is a different perspective than what I've seen on this before!
@seano51
@seano51 10 месяцев назад
I love mine for assembling and disassembling electronics. Yes it has a wobble but it does not impact operation.
@wilmerpacheco
@wilmerpacheco 10 месяцев назад
Excellent video 🎉
@andressoto803
@andressoto803 10 месяцев назад
Nice precision fujiyas 🔥👌
@iRA_mkb
@iRA_mkb 10 месяцев назад
Nice review mate.
@vongtran7595
@vongtran7595 2 месяца назад
Thanks
@mvevitsis
@mvevitsis 10 месяцев назад
I have one coming Monday. Hope it's not this bad.
@WhiteVaille
@WhiteVaille 10 месяцев назад
Wow, lol. Thanks for this unintentional teardown. I got a no-name (Eravor???) variant of these from Amazon Vine last year, and didn't really think much of it when I first tore it apart. I certainly didn't expect a gearbox inside (I was primarily interested in seeing what size battery it used, as well as seeing what the wiring and connections looked like). But, thanks for giving me the silly idea to pop it open again to inspect, and it seems it has practically the same design as this. I'm not sure what kind of grease this is (something blue, and seemingly very dry and sticky?), but it also seems disappointingly sparse like your unit. Just washed all the gears and bearings in some acetone, and replaced with a drop and a dab of SuperLube oil and grease (G1) similar to your application. Probably not necessary, but eh, I'm happy to tweak my tools for better performance or longevity. So, thanks again for this inside look and inspiration! (FWIW, while I think my unit's just fine, the Vessel drivers do seem to have slightly better fit and finish, with higher quality plastics, plus those varying drive modes, whereas mine is a single speed.)
@aussiehardwood6196
@aussiehardwood6196 10 месяцев назад
Great video, I too wish the screwdriver had tighter tolerance with no play. Vessel could fix this perhaps it may cost a little more but it would be worth it.
@NotIT
@NotIT 10 месяцев назад
Nice teardown. Interesting to see the guts as I'm not taking mine apart. I have a 2D-E (no number after the E) which seems identical as far as I ca tell that I purchased about a year ago and it doesn't wobble like yours. Wonder if they've 'cost reduced' the current model in some way?
@TheNoNotReally
@TheNoNotReally 10 месяцев назад
I'd love it if they fixed the amount of play/runout in the bit holder, but I still really like mine.
@bfcotftw111
@bfcotftw111 9 месяцев назад
@bzeug have you tried the Makita Bit Piece in here with the US bits? Does it fit or take out the play? Thank you.
@user-lp7dd7dz9m
@user-lp7dd7dz9m 10 месяцев назад
I have a few different electic screwdrivers and they all have some wobble.
@matthewandrews8816
@matthewandrews8816 5 месяцев назад
I have only had mine for a few weeks and today got caught in some light rain. It was in my tool belt and must of copped a bit of water. It now is stuck on reverse and will only stop spinning if I put in on charge.
@Games_and_Tech
@Games_and_Tech 6 месяцев назад
Any good alternative, I looking for something like this, an electric screwdriver that has screwdriver shape, on the small side, with speed regulation, with no wabble and magnetic bits that hold screws... I am sking for too much?
@ergunguler3981
@ergunguler3981 5 месяцев назад
Video için çok teşekkür ederim. Sadece pil değiştirmek için tornavidanın arkasını açmak yeterli mi?
@naezro
@naezro 10 месяцев назад
I wish someone would make a electric screwdriver that took replaceable 1865 batteries I have so many from the flashlights I own.
@ks-hg5vo
@ks-hg5vo 10 месяцев назад
Your wish may come true. The EU has just passed a law requiring all gadgets phones incl to have user replacable batteries without the use of special tools to remove. So next couple of years going to see a massive change . A kick for nitecore and apple alike.
@ozyrob1
@ozyrob1 3 месяца назад
Excellent news​@@ks-hg5vo
@ksavage681
@ksavage681 2 месяца назад
Buy the special long bit sets for this. I bought two different sets for 8 each.
@drscopeify
@drscopeify 9 месяцев назад
Shaft wobble really gets me its like an OCD thing. Is this similar to the one on Amazon 220USB-1U 220USB1U it looks a bit different no? It has a blue selector?
@maulvillalagarda2243
@maulvillalagarda2243 10 месяцев назад
Lol I’ve been using this for two months on low speed because I thought low speed was high torque. But I guess the high speed is highest torque. The package is in Japanese, so thanks for this video haha. I don’t recommend long and heavy bits like 6inch with this because I feel it loses leverage and slows it down. I also don’t recommend hand torquing too tight because I have heard clicking/crunching when going too tight, and I don’t want to test the breaking point. I use with the vessel three inch double ended bit and love it !
@multimedia4238
@multimedia4238 4 месяца назад
👍
@handymangamer238
@handymangamer238 10 месяцев назад
I've got mine about a month ago, it was after I bought the single speed one, which I really love but sometimes its too fast! so I wanted to get one where I could lower the speed. Well unfortunately I saw the wobble right away and was very disappointed as the single speed one have absolutely no wobble. I thought I got a lemon but now looking at yours, I think this is a flaw in all of them.
@aussiehardwood6196
@aussiehardwood6196 10 месяцев назад
Wow, so your saying the single speed units dont have any wobble or play, that's interesting. Do you prefer using the single speed models over the 3 speed because the mechanism is tighter or does it not bother you? I presumed they would all have that slop and if what you say is corrects I might just get either the high or slow speed model.
@crf150r777
@crf150r777 8 месяцев назад
Could you do a battery upgrade and what would that do for you love to see you mod one
@gf2e
@gf2e 10 месяцев назад
Is that a hard drive on a DIN rail? EDIT: I see it’s not, later in the video. Something from Omron :) I’ve been doing a lot of stuff with DIN rails recently and really love being able to assemble arduino projects and sensors on a DIN rail and then move it into my car or RV as a sub assembly.
@bzeug
@bzeug 10 месяцев назад
That big black box is a good power supply. AC in DC out. I was going to use it for a RasPi DIN rail project. There are so many cool things that DIN rail mount.
@mvevitsis
@mvevitsis 10 месяцев назад
Why vessel terminal bits over ECX though?
@bzeug
@bzeug 10 месяцев назад
ECX is different.
@mvevitsis
@mvevitsis 10 месяцев назад
@@bzeug but you live in the US, right?
@bzeug
@bzeug 10 месяцев назад
Yes I am in the US. @@mvevitsis
@V92_93_zero5
@V92_93_zero5 9 месяцев назад
Do you have an affiliate link to the orange plier?
@bzeug
@bzeug 9 месяцев назад
Thank you for asking. Here it is. amzn.to/3thZsNn
@bzeug
@bzeug 9 месяцев назад
Found a better link on Amazon USA, looks like it imports from Japan though. amzn.to/3LMPGJE
@nelchan2421
@nelchan2421 10 месяцев назад
always charge this tools
@aidensmobile614
@aidensmobile614 10 месяцев назад
Bosch Go 2 seems better in every regard, bar USB C and size. Not sure why you would pick this over the Bosch.
@naezro
@naezro 10 месяцев назад
Isn't this smaller than the Borscht?
@naezro
@naezro 10 месяцев назад
Just looked it up online, it has a larger head, micro USB, and a only a magnetic collet. So I'm convinced the vessel is superior imo.
@TheNoNotReally
@TheNoNotReally 10 месяцев назад
I picked the Vessel because the bosch doesn't fit in my tool pouch pockets.
@techr9186
@techr9186 10 месяцев назад
more handy and better form factor for smaller jobs, 170g vs 310 of Bosh go 2
@NicksStuff
@NicksStuff 10 месяцев назад
For a tool made in Japan, that's disappointing
@J_Brian
@J_Brian 9 месяцев назад
It’s not the tool it just takes Japan bits.. what part did you not understand??
@georgescg7342
@georgescg7342 10 месяцев назад
i dont think those are really made in japan.
@bzeug
@bzeug 10 месяцев назад
I also have my doubts.
Далее
ДВЕ МЕДИЦИНЫ В ОДНОЙ СТРАНЕ
43:03
Дарю Самокат Скейтеру !
00:42
Просмотров 335 тыс.
"HAZSEL" Screw Remover Series
2:36
Просмотров 3,2 тыс.
Precision Electric Screwdriver The Fanttik E1 Max
20:31