Tearing Apart My New RTX 3080Ti & Reapplying Thermal Paste - EVGA FTW3 ULTRA Teardown (Newegg Now)

Подписаться 56 тыс.

Просмотров 37 тыс.

50% 1

This is a teardown and repaste of the EVGA RTX 3080Ti FTW3 ULTRA. I go over the process of opening up this graphics card and reapplying thermal paste.
This video is sponsored by Newegg, and all opinions are my own.
Newegg Shuffle: click.linksynergy.com/deeplin...
EVGA RTX 3080Ti FTW3 ULTRA: click.linksynergy.com/deeplin...
iFixit Pro Tech Toolkit: amzn.to/3dGKPbC
Best Buy:
EVGA RTX 3080Ti FTW3 ULTRA: shop-links.co/175010650258515...
iFixit Pro Tech Toolkit: shop-links.co/175010658611837...
Thermal Grizzly Kryonaut Thermal Paste: amzn.to/3hBtSk0
Autonomous: bit.ly/3vGaNmz
5% Discount Code: TONYTECHBYTES02
#RTX3080Ti #TonyTechBytes #NeweggNow
-------------------------------------------------------------------------------------------------------------------------------
GamersNexus' EVGA RTX 3080 FTW3 ULTRA Teardown Video: • EVGA RTX 3080 FTW3 Tea...
-------------------------------------------------------------------------------------------------------------------------------
Business Inquiries: tonytechbytes@gmail.com
My Amazon Gear/Tech Wishlist: www.amazon.com/hz/wishlist/ls...
Custom PC Builds: www.speccify.tech/
Check out all my social medias: solo.to/tonytechbytes
Music used in my videos: www.epidemicsound.com/referra...
Check out my Amazon storefront to support my channel (affiliate links with no additional cost to you): www.amazon.com/shop/tonytechb...
My ENTIRE LIST of GEAR: kit.co/TonyTechBytes
-------------------------------------------------------------------------------------------------------------------------------
ALL My PC Parts:
Lian Li O11D Mini Case: amzn.to/3dutyT9
NZXT N7 B550 Motherboard: amzn.to/3dtADDa
AMD Ryzen 9 3900X CPU: amzn.to/2PhBqev
NZXT Kraken Z53 CPU Cooler: amzn.to/3jsl0zJ
EVGA RTX 3080Ti FTW3 Ultra GPU: amzn.to/3y5lMGU
Corsair Vengeance RGB PRO 32GB 3200mhz: amzn.to/2VfElYQ
Sabrent PCIE 4.0 1TB SSD: amzn.to/38QHLWb
Samsung 970 Evo Plus 500gb SSD: amzn.to/39VzZKx
ARCTIC P12 Fans: amzn.to/2UgSmas
Corsair SF750 80+ Platinum Power Supply: amzn.to/3AbbE1v
MSI Optix MAG241C 1080p 144Hz Monitor - amzn.to/2OaejEv
iFixit Pro Tech Toolkit - amzn.to/2XTj4GT
Magnetic Tipped Screwdrivers - amzn.to/2Sqp3ND
Thermal Grizzly Kryonaut (1 gram) - amzn.to/2SqVwDh
Thermal Grizzly Kryonaut (11.1 grams) - amzn.to/2Y0dvSd
Alienware 34” Ultrawide Monitor: amzn.to/3xcEKM2
My COMPLETE list of PC parts (in one website): kit.co/TonyTechBytes/small-fo...
-------------------------------------------------------------------------------------------------------------------------------
My List of GEAR for recording videos:
AWESOME Camera - amzn.to/2DSWbcq
AMAZING Lens - amzn.to/2KqirL4
GREAT Speed Booster Adapter - amzn.to/2S8SmmC
INEXPENSIVE HIGH QUALITY Mic - amzn.to/2S8a5uh
CHEAP Boom Stand - amzn.to/2Fzw8sn
HIGH QUALITY Tripod - amzn.to/2TBqNn8
BUDGET Tripod Fluid Head - amzn.to/2DUk5Ec
COMPACT Camera Bag - amzn.to/2TA5zGC
VERSATILE Audio recorder - amzn.to/2FAMjFZ
-------------------------------------------------------------------------------------------------------------------------------
FOLLOW ME On My Social Medias!
TikTok: / tonytechbytes
Twitter: / tonytechbytes
Instagram: / tonytechbytes
Twitch: / tonytechbytes
Solo (all links in one site): solo.to/tonytechbytes
TonyTechBytes is a U.S. brand ambassador for OnePlus but is in no regard inclined to speak highly of them and express untruthful opinions.
TonyTechBytes is also a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com, Amazon.ca, Amazon.co.uk etc. The Amazon Associates Program gives a bit of commission to the creator (without any additional cost to the purchaser) whenever one purchases from the links in the description.

Наука

Опубликовано:

14 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 157

@ernestorodriguez3182 2 года назад

Thanks a lot for making this video since I was tempting to do this on the same GPU. This really saved me the trouble but appreciate on your hard work

@hksiewww353 2 года назад

Hello, I see that you did not replace the thermal putty. Is it necessary to change the thermal putty ? Can i use thermal pads instead ? Also, what should the thickness be ?

@nicolasbehar8584 2 года назад

Your GPU hot spot temperature seems lower. However the maximum core voltage is lower to the initial test. I suggest that you check clock speed vs previous test as well. Thanks for the video.

@kiwiasian 2 года назад

At 9:10 I think you hit the nail on the head in terms of why marginally higher temps on thicker paste is better than a thinner paste like Kryonaut. I did the same knowing that in a years time I’ll need to open it up again and re-apply the Kryonaut. For that reason, I think next time I’d use thicker Hydronaut and live with then 1-2 degree difference.

@andrewmorris3479 2 года назад

I’ve been playing with undervolting the past few days and it works like a charm with this card. At 1905Mhz and 0.900V I’m seeing 7C less temperatures and 200 rpm less on the fans for the exact same performance.

@TonyTechBytes 2 года назад

Oh nice!

@patriciadrescherflores8141 2 года назад

Same here with 1920Mhz at .900V

@yoyigu 2 года назад

950v at 1900mhz here !! Same performance and 8 to 10C Less

@furrychewbacca7 2 года назад

Ive also got mine at 900mv at 1905MHz +1000 on the memory and with a custom fan curve in after burner I went from like 85 degree temps to a max of 76 degrees running 100 less average watts as well. Undervolting is a must with how hot these RTX 30 series cards get lol

@bradyp3096 2 года назад

me too, I was hesitant to undervolt my ftw3 3090. But I did it and it was the best thing ever. Temps dropped from 77 to 67c and -300 RPM. so it runs quieter and cooler. 1875Mhz at 875mV for 4K120hz , and 1890Mhz 900mV for 1440p144hz.

@nathanielramirez8997 2 года назад

Hey I wanted to ask what you did with the LR22 to put it back together after removing the thermal putty? Did you use thermal pads?

@BUFFDgaming 2 месяца назад

he seem to forget that part in general.. if he had a xc3 he would of gain about 3 degree

@Tony-nl6pf 2 года назад

You didn't replace the thermal pads. I was hoping there was a video on sizes, dam.

@occlusion6557 2 года назад

Gelid Solutions GP-Extreme 12W-Thermal Pad 80x40x2.0mm, thoes are the best

@saveEarth69 2 года назад

i wonder if he would've got a better temp drop if he used some kryonaut extreme paste and some kryonaut thermal pads.. but what about that putty tho. what can that be replaced with?

@calinewsdude 2 года назад

Good video👍🏻question for you how can I make my PC into a 4k what would I have to change Graphics card?

@uhdashy2320 2 года назад

Yes a good gpu good cpu and a monitor that supports 4k

@leonskennedy4016 2 года назад

Is it normal for the GPU fan to stop spinning when your Pc is on idle, my 3 fans only kick in when I play games or run a heavy benchmark like 3Dfiremark. ( Running a RTX 3080ti EVGA) kinda Weird how it’s able to maintain a 40 to 46 degrees on idle with out the fans spinning, lmk if this is normal or not

@jarednielsen5041 2 года назад

I have the 3080 ti ftw3 ultra and it will do that if you run the normal bios. When you are running the OC bios the fans have a set floor of 20% (I think) so mine idles at about 31-33C. Running the normal bios my card will idle at 49-52ish with the fans off. Im running 3 2k 165 hz monitors which makes quite a bit of a difference in idle temps when compared to running a single monitor, at least for me. My card will idle at 37ish watts with 3 monitors and like 23 watts with one.

@jeremyf-nl2du Год назад

i have a 3080 ftw3 and at around 100% usage im getting near 90 c with 100% fan speed. ive done all the software troubleshooting. is it a sign to replace thermal paste (I just got the gpu today)

@dreamomega 2 года назад

Always wondered why EVGA cards had that open piece on the backplate vs the other ones do not.

@puddleduckist 2 года назад

I recently bought a new ftw3 3080ti. I just took it apart and added the cool my gpu copper plate and also replaced the remaining pads with kritcal pads and used mx 4 paste. The original paste was pretty poor and dry, the thermal pads and putty were ok but the paste was very poor. Looking forward to trying it in my new build. Thanks for sharing.

@rt3rog 2 года назад

buddy, i am in the process of doing the same thing. I am buying 1 mm gelid extreme pads and 2 mm extreme pads, as well as the mx 4 paste. did you end up doing it? any results?

@puddleduckist 2 года назад

@@rt3rog I did it awhile ago, it's not difficult just be sure to take your time. I haven't built my new pc yet, about to, waiting on some 3d printed intakes i ordered from etsy then the fun begins. My 3080ti is new so I can't compare old results. I wanted to do it from all the reviews I've read on how hot these cards run and for the price i want it to last a good long time. I was surprised my gpu was new and the paste was so dry and poorly put on. It should run nice n cool now fingers 🤞! Best of luck with your install!

@Cobretti_GTI 2 года назад

Tony next time you use the plastic aplicator, try to use it at an angle of 160 degree, applying the right pressure. You will see that it is much easier to spread the paste. You have to try the new Thermal Grizzly Kryonaut Extreme :)

@mikezappulla4092 2 года назад

I gave up trying to spread that stuff. Lol. Just kept sticking to the applicator and was thicker than kryonaut not extreme. I would try to spread it and if the area where I applied it came into contact with the applicator again, it would come off of that area and stick to the applicator.

@joselaba 2 года назад

Glad I found your channel man, love your editing on the tear down and paste reapplication. I bought this card out of desperation, and because I’ve waited too long ever since graduating and working lol. So this card for me runs extremely hot, I’m talking about 80+ degrees at only 60-70% usage. For reference, I’m running ultra/insane settings on gears 5, CAPPED at 144fps @ 1080p…. I was able to achieve a steady undervolt of 1965Mhz @ 1000mV, don’t want to deal with artifacts, especially at a low resolution (temps began to settle at around 70 degrees). But, this is an insane amount of software effort for settling for typical performance at last gen resolutions and refresh rate….I really shouldn’t be dealing with temps and fan speeds of this caliber, especially for 1080p gaming. Makes me want to consider an RMA with EVGA, but I’m not sure of how that process would prevail given the current market demand. Would you recommend a reapplication of paste at this point? Any suggestions on improving these sort of temps? (halo infinite runs just as sketchy too, even capped at 120 -_-)

@housebaelishgaming 2 года назад

bro congrats on the card you deserve it! I have just blew 5k on a cpu build and since this was my first build I RESEARCHED EVERY FRIGGEN LITTLE THING I hope you didn't RMA your card yet but I wanted to tell you to undo the undervolt and download precision x (it's an evga application) update firmware to resolve your heat issue much love

@shaneprince6572 2 года назад

Damn, good to know it's wa aste of time to do this

@whitedesku 2 года назад

Lucky lucky Tony!

@Mars-1995 Год назад

Spreading thermal paste as much as possible with a GPU is recommended since they don't have IHS or heat spreading like It's found on CPU. And when cleaning the Chip make sure not to use papertowels if you are not confi with it since you can damage your cards or smaller pins around the chip

@ryanstagg7187 2 года назад

What size thermal pads did you use???

@mileskt9232 2 года назад

by default in a lian li 011 with 9 fans 6 of which are intake with the lian li fans i get 83c with my 3080ti ftw ultra...and my 3080 was only getting 72 :/

@eldad4446 2 года назад

You need to replace the thermal pads if you want to reduce your temps

@sozbroski 2 года назад

how are you fitting that chonk into your ghost s1?

@nikolacekredzi905 2 года назад

I am surprised ther is no heat pads between the pcb and the backplate my gigabyte 2070super had some

@TonyTechBytes 2 года назад

Yeah I was surprised by that too especially since it’s a metal backplate

@Cobretti_GTI 2 года назад

BTW. I think you can change the thermal paste only by removing the 4 screws near the GPU die :P

@draxuss4205 2 года назад

You can, My 2080 Ti XC Ultra was basically the same...... Waiting for my 3080 Ti FTW3 to arrive and this is the first thing I'm doing before I plug it in.

@Henrylc33 2 года назад

Great vid!

@alexmccafferty7871 2 года назад

Undervolting is really what you wanna do with this card.. the stock voltage is wayyyyy more than what it needs to be.. I got a stable clock at 1980mhz at .92v.. 68 degrees when stress testing

@michaelbeleut6480 2 года назад

Interesting. The card runs extremely hot. Was thinking of getting the hybrid kit to cool it down. Will check on this and see what I can do.

@shmokes4728 2 года назад

wow i couldn't get 1980 stable on mine without at least .97v. what is your memory clock for this OC?

@dacbiet 2 года назад

Yeah I undervolt mines and been doing benchmarks to find the best curve. I’ve never gone over 70c on 5120x1440p and constant 70-75 fps with RT on and everything maxed out

@shmokes4728 2 года назад

@@dacbiet got a notification for your reply. Random but I was curious have you ever tried to run fortnite with an undervolt? I have my undervolt settings active and every game runs beautifully and the temps are great but as soon as I play Fortnite, a few minutes into a match, I crash. And it doesn’t seem to matter how much I up the voltage the game only runs with the stock OC settings. Am curious if you or anyone else has ran into this with this game or any other game

@dacbiet 2 года назад

@@shmokes4728 unfortunately I haven’t tried Fortnite since I don’t play it. But please keep in mind there’s some games that are poorly optimized so Fortnite could be one of it I lowered my clock speed by -280 and under voltage, on 875, I raised it up to 1800mhz or something. I dunno how to properly give out the specs lol

@bengyruiz4490 2 года назад

U should try g12 from nzxt with your gpu. I want to see the temperature.

@TonyTechBytes 2 года назад

Hm that would be interesting

@bengyruiz4490 2 года назад

@@TonyTechBytes yeah u should try it, since u have a nzxt case

@sdmookie5990 2 года назад

@@TonyTechBytes EVGA has their own hybrid cooler. I just purchased one on their website yesterday.

@danielvargas3886 Год назад

so i have both 3080ti and 2080ti and 2080ti doesnt get that hot as the 3080ti. 10 deegree less.. i tought my 3080ti has to be cleanned but. 75 deegrees is the regular temperature for it. thanks for the video is amazing, it answered my doubts about my gpu

@gershonlapokimon4698 2 года назад

damn boiiii, that's a thick paste application

@GappyElite 2 года назад

How often should you apply this paste? This makes me a bit anxious lol

@timtoomuch 2 года назад

Use to use thermal grizzly until I found kingpin thermal paste it's my new favorite

@Shekelz 2 года назад

will it void the warranty?

@Cristiano-ip5bs 2 года назад

Very cool

@TonyTechBytes 2 года назад

Thanks!

@brandonbajc2084 2 года назад

You should really take it back apart and put either new thermal puddy or some thick thermal pads over your chokes. That's what I don't like about this generation of evga cards, they all use that thermal puddy on the chokes and it really sucks to have to clean and re apply.

@JZF629 2 года назад

Just got my 3080ti in a few days ago. Is it necessary to replace the thermal pads like some other cards, or will I be ok just leaving it as is?

@brandonbajc2084 2 года назад

@@JZF629 what AIB model is it? Evga? Msi? Gigabyte? Zotac? Founders?

@mustafaavc6924 2 года назад

Which mm thermal pads can i use

@HochuPivka 2 года назад

GPU die on rtx3080/Ti and 3090 isn't that hot, it heats up about 74 degrees which is pretty adequate. G6x memory chips, however, tend to heat up to 105 degrees on many cards, and if you want to improve overall temps I would suggest to look for better thermal pads. That is more relevant for rtx 3090 users.

@Major774 2 года назад

Wow… the memory temps. stock are good!

@winsauceiswin 2 года назад

I’m considering doing this because my 3080 (Aurus) must have some problem because it hits 87C - 88C during stress tests and it has hit 91C running halo infinite. I just bought it 2 weeks ago… I’ve read online there can be pockets of air between the thermal paste and the sink that cause hot spots. I’ve also had crashes occur completely randomly at temperature as low as 73C. I’d appreciate any comments or thoughts if anyone has them or has experienced something similar.

@ElusiveAura 2 года назад

Try under volting first

@simisg2121 Год назад

Try that, and my evga 2080 had really bad thermal paste and was crashing Tarkov all the time after about 6 months. Ended up getting 3080ti FTW3 (which I really regret per my other comment) and took the 2080 apart and changed the paste. The 2080 is going strong with high 60’s temps to low 70’s…most games running maxed @2k no problems..

@CaptNemo_ 2 года назад

At bro if you get your hands on the Corsair 7000d airflow case can you do a review on temps with the 3080 ti

@housebaelishgaming 2 года назад

that's the case I'm using for My 3080ti!

@CaptNemo_ 2 года назад

@@housebaelishgaming how’s the temps

@housebaelishgaming 2 года назад

@@CaptNemo_ you can't go wrong with it at all their not better than say a lianli evo but their solid I'll get you exact Temps within 2 days

@CaptNemo_ 2 года назад

@@housebaelishgaming thx gamer bro

@housebaelishgaming 2 года назад

@@CaptNemo_ hell ya

@Squishmallows24 2 года назад

I’ve been doing that damn shuffle for like 2 months now and nothing! lol

@JJay-ni3vv 2 года назад

Make sure to check the four tork screw around the GPU itself. Seeing how there was a generous amount of thermal paste it may have adjusted itself down under heat. Kryonaut requires you to lay the the paddle on a more flat angle to acquire thinner applications. 1gram tube should yield 3 -4 applications, but like you said the only difference it really makes is money spent on tubes of paste, great job.

@redclaw72666 Год назад

Or spend $50 on 30 grams of KPX lmao

@webx135 2 года назад

I'd say the main thing that triggers me are those spatulas. I'm credit card all the way. Been a while, but it seemed like conductonaut is a little rough for a bit and you have to work with it. Still a much less intense experience than the conductonaut.

@anythingbutbeer3497 3 месяца назад

I just repasted my 3080ti (also evga). I wish you showed how dam hard it was to take the cooler off. it felt like I forgot to take out a screw... but no, all the thermal pads, plus the thermal putty being hardened and squished between components, glued the dam thing together. You cut the video probably because you thought prying at it looked bad, but I wish I saw you struggle with it so I didn't feel like a crazy person risking breaking the card. I had to scrape out all the dried out putty because it was so dry it crumbled away. I did zero overclocking on a 3 year old card and the paste and putty was wrecked.

@mxtchv Год назад

Bro, you should apply more thermal paste. Squeeze the whole tube, it'll be perfect.

@Dysphoricsmile 2 года назад

TG Kryonaut has AWLAYS been thick and hard to spread in my experience. Hydronaut is a bit easier to spread - a good bit cheaper, and ALMOST as good, like it rates above MX-4 and all that junk, and lands right near Gelid GC Extreme.

@miguelito8108 2 года назад

Hello, you forgot to add the candles 😁

@polie67 2 года назад

is this the verge?

@raedalhazmi6448 Год назад

Ftw3 did good job with this 3080 ti makes it specifically the best gaming gpu in 3000 series Highest pl bios even more than some 3090s, great thermal pad and paste. Very good stock cooler And great CS GJ EVGA

@Engineerbydey 2 года назад

What the msrp for this card?1

@BigBear-- 2 года назад

Jesus…that was like The Verge level of thermal paste on there. You sure you got enough on there? Kryo usually needs a bit of pressure to spread nice and thin with their included spatula (I’d also use a lower angle with the spatula when applying). Whatever works though I guess. Like you said, it’s not conductive, so it’s safe. I’m curious what the temps would look like with liquid metal…

@housebaelishgaming 2 года назад

don't be curious just go check out Gamers nexus I believe they did it

@BigBear-- 2 года назад

@@housebaelishgaming I'd love to check that out, do you know the title of the video they did it in? I watch almost all their stuff, but I guess I somehow missed this one.

@housebaelishgaming 2 года назад

@@BigBear-- wait maybe it was for the Intel 12900k

@gregvandy34 Год назад

My 3080ti Ftw3 runs about the same temp. my fans are at 70% when card reaches 70c and it typically tops out at about 67c and my fans are set to step up so they're at 60% til it gets to 70c which it never does since I removed the big OC I had and just run it in the stock bios switch. Looks like EVGA beefed up the power delivery big time from the 3080. I don't know if that was due to the 3080s underwhelming PCB or they just used the 3090 but seeing how the 3090 is considerably different, I'd say it's due to the weak 3080 Ftw3 which was a good GPU mostly, mine was, just nothing great as far as the PCB, basically a stretched founders.

@LaplacianFourier 2 года назад

"How can we make sure we let them know that we are not liable for damages?" This guy: "Yes"

@Dysphoricsmile 2 года назад

I have this exact card as well, loving it. I am HARDCORE into Control! I play it with and without DLSS, but I think I like how DLSS on highest quality looks better, and I get ~130 FPS instead of about 78 average. I ahve a pretty heavy OC, +134 on core, +933 on memory via EVGA X1 - been 100% stable, and scores higher than stock, or at lower settings I have tried.

@BelaPuma 2 года назад

Lower the memory for 233mhz and you'll have 19 fps more , more speed don't mean more fast

@Demon09-_- 2 года назад

so the back plate is just for looks as there is no thermal pads on there to help at all. kinda a waste tbh to not at least have a pad on the back side of the vrm or something

@carlosmarciales6418 2 года назад

Brother, I recommend that you change your thermal pads, in the video you only applied thermal paste, your gpu heats many the vram and the other components!

@housebaelishgaming 2 года назад

he just got it a month ago brother

@MarmaladeSally 2 года назад

You wanted to see what it looked like inside? Ever here of photos? Also tests have shown that EVGA has the best contact of their chip and cooler. No way you can ever get the cooler back on with the same precision.

@housebaelishgaming 2 года назад

hello there! So are you saying don't open your card to change your paste?

@Empyre47AT 2 года назад

I'm not going to say that you added too much paste, but I will say that you wasted a bit. I recently water blocked this exact GPU with about 1/3 the Kryonaut that you used. Also, I used a credit card to spread it. Makes it a bit easier.

@yunkeacme 2 года назад

Visa, master or amex ?

@jacobmarley1093 2 года назад

Not to bad , I own the same card , a little bit of a butcher job on the paste.....next time use cling wrap on your finger tip ....you can apply the paste so much better and more evenly

@anmordal-swe2203 2 года назад

A true "verge" episode but with GPU!

@kennyg9257 2 года назад

🤣 Cringe watching him put way too much thermal paste and not replacing the thermal putty.

@miningforpennies4225 2 года назад

Could have repasted it 4 times with all that cpu paste

@TechWithNiccolo 2 года назад

Broo you destroyed your thermal pads and didn't replace them... damn

@Kyhd. 2 года назад

The thermal paste triggers me lmao

@TonyTechBytes 2 года назад

Heheh

@HFCR 2 года назад

I have the same Gpu and mine always goes up to 86°

@BlackBruceLeeTheGreatDekuTree 2 года назад

Just undervolt bro, repasting is really unnecessary

@HFCR 2 года назад

@@BlackBruceLeeTheGreatDekuTree I will. Thank you

@oprime9361 9 месяцев назад

"To prevent pump-out" "As you can see there is a ton of thermal paste but thats not too big of an issue csuse it can just seep out the sides" Bro what do you want 😭😭😭😭

@barneymoore6243 2 года назад

Tears apart 1 month old impossible to buy GPU for no reason, proceeds to apply way too much paste, ends up with worse results. Def triggered.

@housebaelishgaming 2 года назад

he smothered it with paste which actually did a bit more harm than good (not super harm but still harm) and it would probably trigger you more to know a simple precision x download and firmware update fixes thermals. I just got mine today and will be doing that not this.

@barndogusn 2 года назад

@@housebaelishgaming I've actually had this card for about a year now, and yea I upgraded fw using evga precision. it's a beast, so enjoy! Out of the box there's nothing wrong with thermals that fw upgrade "fixes", this guy is just dumb.

@Cobretti_GTI 2 года назад

Sorry Tony, i am a really pain in the ass. Last comment, i promise: ). i have the same GPU. Try to use a custom fan profile using Precision X from EVGA. About your case fans..... The bottom ones, are they working as intake? The fans on the AIO radiator -----exhaust? . And the final one. In the back i hope you have an exhaust fan: ).

@housebaelishgaming 2 года назад

he needs to download the firmware update from that as well because that fixes the thermal issues

@TheBlakebliss 2 года назад

omg i cringed at the thermal paste application holy smokes

@WiseOne93 2 года назад

Rtx 30 cards are ment to run at higher temp.

@GorillaHavoc 4 месяца назад

Dude what the....... why so much thermal

@josephwiscarson1259 2 года назад

Play a couple matches of apex.. idk wtf it is about that game, but both gpus I've had runs hot with that game.

@sofyo2bib 10 месяцев назад

In 2 test u dont push gpu at 100% ...prouve it?! Voltage max 1.031 not 1.071 😉👌

@azncoltz 2 года назад

The verge teardown non hate just why just buy evga hybrid you'll see Temps won't even past 53 lol js tho

@JZF629 2 года назад

Hard to get hybrid cards, but you are telling no lies… the cards keeps temps icy ❄️

@DrR1pper 2 года назад

"How not to reapply thermal paste - EVGA FTW...."

@qandmarco8994 2 года назад

After a month?.....Atleast 6 months before this should be done and thats only if your mining lol

@RIchardDavidson007 2 года назад

You put to much paste juicy thermal paste.

@ollybutler99 2 года назад

@TonyTechBytes 2 года назад

Thank you for watching!

@andrzejandvincegaming3015 2 года назад

Thanks for showing us the tear down however you used about 4 times as much thermal compound as you needed... you set out saying you will use a thin amount and put down more than was already on there! Really I hope people watching new to this don't follow this advice, I can see some expensive bricks.

@dotCody Год назад

i luv u

@user-yw9fm7kb1s 2 года назад

I would rather apply too much paste than not enough.

@Battleneter 2 года назад

That was beyond "too much thermal paste", that may have been the most paste I have ever seen used :P

@Lethargy01 2 года назад

That thermal putty is what's going to screw everyone up long term. It's hard to find and if you do find it it's super expensive. Can't replace it with pads due to the poor spacial tolerances in EVGA's design of the 3080 and 3090. The Hybrid cooler version uses thermal pads, so at least that version of the card will be easily and cheaply serviceable long term.

@michaelbeleut6480 2 года назад

Yep. When I got the card I said “WHY did Evga do this!?” I’m probably going to buy a hybrid kit.

@mikebellamy9052 2 года назад

omg 😆 to much “tooth” paste

@Sjbjo 2 года назад

1:08

@Battleneter 2 года назад

lol WAY too much thermal paste, most of that would have squished out once it was compressed.

@ghostofdream 2 года назад

what the fuck kind of paste application is that you just made a new verge video

@jayliu6076 2 года назад

1 degree. Waste of time. :D

@akileshyelchuru8382 2 года назад

Hey I know you have a evga 3080ti there but would you consider trading it for a zotac 3070ti

@akileshyelchuru8382 2 года назад

@@naiyief I’m just shooting my shot

@TonyTechBytes 2 года назад

@@naiyief lol

@Etrayo 2 года назад

.... why?

@travisgarland840 2 года назад

Maybe fresh thermal paste and not old dried out shitn

@AzzozAlHasani 2 года назад

Too much paste!

@simisg2121 Год назад

DO NOT BUY THIS CARD, evga 3080 / ti FTW3, a lot of forum posts of fans not reading right with sensors or just flat out not working as well as making obnoxiously annoying sounds as they turn. Mine started with fan 3 making some sound, they it started to fail, yesturday all fans failed, took it apart, cleaned it, and fans 2 / 3 are working (hardly) temps in high 80’s low 90’s. These cards are legit trash and it bs coming evga considering they use to make really nice products (680’s still work to this day)….

@bentleybrian3184 2 года назад

Love this guy but this is stupid to put that much paste on the GPU. It looks like a hot mess you better hope your card never has issues after putting all that fucking paste on a new GPU. Bro there is so many other things you could have did a video on and plus if the manufacturer thought it needed all that fucking paste don’t you think all GPU would have that much paste on them?

@housebaelishgaming 2 года назад

a firmware update would have solved it through precision x it fixes the heat issues -_-