No video :(

Tearing down the Blaster Frame and Restoring the Headlight Plastic! Yamaha Blaster 200

Подписаться 237 тыс.

Просмотров 70 тыс.

50% 1

Tearing down the Blaster Frame and Restoring the Headlight Plastic! Yamaha Blaster 200
#2stroke #yamaha #restoration
Happy new year and thank you for watching my video 🤘🤘🤘 What do you guys think of the headlight restoration? Oh yea... YOU ROOOCKKKK!!! 🤘
PARTS AND TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
Mini Buffer - amzn.to/3WFK4np
Mothers Wax - amzn.to/3PU3S49
Rubbing Compound - amzn.to/3jwTsvb
Polishing Compound - amzn.to/3WVI22F
Milwaukee M12 Impact Drivers - amzn.to/3WCwLUy
Milwaukee M18 Impact Driver - amzn.to/3hJTjE9
Clamp (For Holding Brake) - amzn.to/3vljnZA
Hub Puller -
Ball Joint Splitter - amzn.to/3YTJioF
Sand Paper - amzn.to/3WSzYzG
Vise Grips - amzn.to/3C0VbiZ
Orbital Sander - amzn.to/3I3iKLS
Maier Front Fenders (Black) - bit.ly/3HncNZL
Maier Hood (Black) - bit.ly/3PhH9P7
Maier Tank Cover (Black) - bit.ly/3FF5dZ7
Headlight Housing - bit.ly/3FkdoJ9
Service Manual - bit.ly/3Yg9zNK
SPONSORS/COMPANIES I TRUST
Rocky Mountain ATV MC - bit.ly/32OHs02
Bonehead Performance Coatings - boneheadperfor... (Mention my name and get 10% off)
Rocket Ron - www.rocketronra...
DRW Performance - bit.ly/34dxWEp (Code SABO10 for 10% off)
Urmosi - urmosi.com/
Power Sports Nation - www.powersport...
Vito's Performance - www.vitosperfo...
MotoBlast - www.njvaporbla...
Zoom Zoom - zoomzoomparts....
MERCH - michael-sabo.c...
Add me on Instagram @michaelsabo350 for Channel Updates!
Companies and Sponsors please contact: michaelsabo350@gmail.com
I own the license to use any and all music in this video.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 486

@MichaelSabo Год назад

Happy New Year 🤘 Thank you for watching my videos and supporting what I do; this has been an awesome year and 2023 is going to be even better. You all rock and I’m excited to save some sick machines this year together!

@richardmather7561 Год назад

Happy new year bud!

@downtoearthconstruction7768 Год назад

Saw on instagram that polisher did a killer job, Happy New Year my man! 🎉

@karl6823 Год назад

Get a hold of Sean Howell at HPM he has some nice stuff for the blaster

@waylonmcdaniel1725 Год назад

You should vs the 660 against the voodoo banshee

@johnbryner9052 Год назад

I appreciate ur hard work and attention to detail. Good job bro 👍

@YannMar Год назад

The true Top G

@MichaelSabo Год назад

Thank you brother 🤘

@jeffgayzose8129 Год назад

What color is your banshee

@YannMar Год назад

@@jeffgayzose8129 😂

@IFIXATVS Год назад

Anyone reading this please tell your friends about this channel. Let’s get Mike to 200k before the end of January. I know I love watching his shenanigans and I’m especially eager to see this Blaster completed. You actually ROCK, Mike!! Here’s to 2023

@MichaelSabo Год назад

Thank you for the love and for the shoutout man! Happy New Year to you!

@Stick_talk216 Год назад

Iv said it before and I’m sure many have but I need to say it again. The best rebuild/restoration channel on RU-vid when it comes to Offroad content. The attention to detail along with the tips and tricks. Don’t know how your not at a million subs

@MichaelSabo Год назад

You always make my day with these Jimmy; thank you for the love and support, I'll see you at 1 million! 🤘

@bilboswaggens2975 Год назад

His last video with plastic buffing is literally going to save me thousands in the future if I can pull it off. It’s been the talk of the town in my trail association after I showed it to everyone. Everyone hates faded plastics. Everyone loves sabo

@royhenson3379 Год назад

Love Sabo posting at this time of day.

@MichaelSabo Год назад

Thank you for watching!

@Joe-Pro89 Год назад

Man don't hold back on the trash can explosions!!!! phenomenal!!!!

@jeranspicer637 Год назад

I love those trashcan shots and explosions

@MichaelSabo Год назад

Haha, thank you for the feedback on them!

@jacobg130productions Год назад

The added earthquake and crashing sounds at the end were golden 👌🏼

@MichaelSabo Год назад

I for some reason find explosions to be funny when placed at the right times

@Iamdesignproducts Год назад

Absolutely love the humility & mechanic humor, great content.

@stuartbellwithvintage2stro375 Год назад

This Chanel is my favourite on all of RU-vid. You and Alan millyard are brilliant.

@MichaelSabo Год назад

Thank you so much dude!

@kennynadeau17 Год назад

so cool to see that you have the budget to completly rebuild an atv but you also show how to bring used parts back to life that most people would just thro away, love it!!! are you building all of the quad in the next top quad?

@SkylarLadouceurRacing Год назад

Happy new year! Be cool to have a video of the process of having the parts powder coated. Keep up the great work!

@MichaelSabo Год назад

Happy New Year! I might do this at my powder coater - a walk through video

@ViNNYDICEnice Год назад

Only channel on RU-vid that I actually have the notification bell on for

@MichaelSabo Год назад

Huge compliment man; thank you

@Jamis. Год назад

19:20 nice!!!👌🏼

@MichaelSabo Год назад

lol, that's actually a pretty nice light

@coyoterob2839 Год назад

The humor that goes into these videos is funny

@MichaelSabo Год назад

Glad you enjoy them man!

@rickymiller1571 Год назад

I really think it’s amazing what you do for those old quads it’s something I want to do with side by sides

@MichaelSabo Год назад

I appreciate that Ricky; you should do it!

@floridatrailrider305 Год назад

Crazy transformation with the headlight

@mikewiley1007 Год назад

Nice job on the headlight 👍🏽 looking forward to the rest of the build!

@MichaelSabo Год назад

Thank you Mike!

@jxntxn1462 Год назад

Love the comedy you been injecting into the vids lately man. Keep em coming!!!

@MichaelSabo Год назад

I appreciate the feedback man! I'm glad you've been enjoying it

@daxmorlock7846 Год назад

I'm glad to see you do this build. This looks like a perfect machine for a budget build. Still can't wait to see the finished product though. You always kill it on any build you do.

@MichaelSabo Год назад

Thanks so much for saying that man!

@j.need4qlife483 Год назад

Fantastic video Michael. All those years of working on disenchanted atvs and bikes clearly show the wealth of experience you have acquired. I know how easy it is for people even with great mechanical skills to just walk away expressing not worth the effort. You clearly show otherwise with persistence and keen observations that rusted out nightmares can be reborn into Phoenix. I salute you for your dedication in making your videos into quality entertaining and very infomative at a professional level. Thank you for starting 2023 with this video.

@MichaelSabo Год назад

Thank you for this awesome compliment man! Made my night!

@AirOnTheMove Год назад

I’m convinced there is nothing basket case garage can’t do! 🔥

@digger_jon2778 Год назад

Facts of life one man's trash is another man's gold..can't tell you how many things ppl thro in the trash that can be repaired straightened or rebuild.

@eviltwinstephen8367 Год назад

I love how the abuse this poor Blaster experienced over the course of its life becomes more evident with every layer you peel back. I just found your channel and I’m enjoying your videos. Keep them coming.

@MichaelSabo Год назад

It's true, on the surface sometime you really can't tell. Thank you for finding my channel and following the build!

@298CRE8 Год назад

It's nothing check ones from UK the rust eats everywhere here and the lack of brains for a thousand dollars you'd be lucky to get one running mainland UK probably rusty as hell requiring bearings seals bushes chain sprockets tyres etc etc got four one as spares for rest and live midlandish England not alot of good examples about 👌😅

@Mitchell.A Год назад

I love your videos, I would love to see a 4x4 4wheeler on here I bet you could make a sick mix of utility and handling and add some sport to a cool 4x4

@MichaelSabo Год назад

Thank you for the love on my videos! I'd like to do a 4x4 at some point

@Adam-wj1pn Год назад

i would watch this youtube channel if it was on cable TV. i love the videos. I'm always excited for the next one to come out. funny and educational.

@ashpunting Год назад

That Quad needed some love and attention for sure, this is what happens when you leave your big boy toys outside 💯🙏

@MichaelSabo Год назад

100% Ash!

@lanniewiant8269 Год назад

Man the plastic looks awesome good job I have been wanting to learn to restore plastic thanks much for showing how. Great work as always!!!

@MichaelSabo Год назад

Thanks man; I don't know if this method would restore plastics but definitely for one's like these that weren't in bad shape, it works pretty well.

@johnnyboy8606 Год назад

It would be awesome to see you doing a Honda atc build. I’ve learned so much from watching, thank you!

@MichaelSabo Год назад

Makes my day hearing that you've learned from watching my videos. I have an ATC lined up but it's a TriZ 250; I'd like to get around to a honda as well

@nontypicalredneck89 Год назад

I am in the process of building a 05 blaster for my son and was glad to see the blaster video keep up the good work

@MichaelSabo Год назад

Good luck with your build and thanks for watching!

@haywire05 Год назад

With the ball joints, take the nut off, flip it over and tighten it just flush with the end. Then you can hit it without fear of mushrooming the end or damaging the treads. However, you can still bend it if you Sabo it real hard. Great channel, love quad wars. Thanks for representing the average guy with cheaper quads. Not everyones got $10k to drop on a quad.

@bilboswaggens2975 Год назад

Love the restorations. It’s so satisfying fixing something rather than buying new. If you use a little cerakote trim coat on the black housing it would bring the gloss back just like the plastics.

@MichaelSabo Год назад

I agree man and thank you for the tip with the cerakote!

@BostonBanshee Год назад

Lmaooo when mike pulls out the Thor wrench for the carrier nuts 🤣🤣 nobody will ever know that feeling of relief until they struggle with bearing nuts and get them free!

@fisherjay8912 Год назад

loving this build so far man i watch all the old vids i love watching u rebuild these bikes

@subd3 Год назад

My dad had a 70's bultaco. Keep the thumbs up coming.

@cameronhunter7542 Год назад

Mike is the best I hope this channel blows up in to something huge

@Jballzx Год назад

Your content is amazing. The comedy is on a whole nother level in addition to the actual work and helpful links to tools! Have a great year Michael!

@MichaelSabo Год назад

Thank you for the feedback man; I appreciate the love!

@Jballzx Год назад

@@MichaelSabo My pleasure and thanks for responding. Looking forward to watching every single video you release in 2023! :)

@newellweeks2759 Месяц назад

I really like when u BS about junk parts and u blow it up.,❤

@fearless5tiger434 Год назад

I have a tip and you might already know this, But when I wanna make graphics and plastics shine even vinyl i just use tire shine. It makes faded black black plastics look brand new. Also great video hoping to get a quad soon and build it up. Thanks for all the knowledge you have taught me

@bryced3832 Год назад

Happy new year Michael! Hey if you get bored this summer come up to Michigan and hit some trails with us!

@MichaelSabo Год назад

Happy New Year Bryce and thank you for inviting me to ride dude!

@lukecombs5242 Год назад

Hey mike when knocking the tie rod’s loose screw the nut back on it backwards and you can wrap on it pretty good to knock it loose and you won’t damage the threads on either just run it backwards and almost flush with the stud leave a couple threads of the nut hanging off the stud and hit it flush you need a soft blow hammer or a brass hammer for those jobs.

@MichaelSabo Год назад

Good tip man; thank you!

@manaaalsuwaidi3643 Год назад

That final hammer hit through 😂😂😂😂👌🏻👌🏻 awesome man keep it up 💪🏻💪🏻💪🏻

@captainaxan4967 Год назад

Super excited to see this thing go in top quad

@MichaelSabo Год назад

Same here man! It’s gonna be hella fun

@captainaxan4967 Год назад

@@MichaelSabo for sure I’m gonna get into racing soon on my blaster since it’s set up for tracks

@fredjones6847 Год назад

I love them rear bumpers, I actually have one I'm saving for my next Blaster.

@willheft3445 Год назад

Keep up the good work, Mike! You make my favorite videos on RU-vid!

@brad5085 Год назад

Thank Mickeal for showing me that everyone even the best accidentally tighten instead of loosening the nut

@troolllllinnnzaragoza3169 Год назад

Love you too bro!! You’re hilarious when you say you’re going to “keep and resell” old parts🤣 Keep up the great content🤘🏼

@SG-Cichlids Год назад

The stuff I use on my boat and lenses is Mckee's 360. Cleans, cuts, and polishes all in one. It's a miracle in a bottle. Terrific stuff

@ESSA974 Год назад

Love ittt!!😢

@duneracerweston Год назад

Yep I'm gonna need to get one of those buffers. I have a few machines that could use it for sure

@MichaelSabo Год назад

It's a handy little tool!

@steveharris6916 Год назад

Winning the war 🦾

@MichaelSabo Год назад

💪

@jax8646 Год назад

Love simple quads like this 👍

@Bri-tg6xr Год назад

👍 on using an adjustable wrench the right way. So many times I see people using it flipped over which causes the jaws to spread apart and slip.

@BlasterBlaner Год назад

Love your work! Just a tip...when knocking on the threaded tierods/ball joints, thread the not on upside down until flush with the threaded shaft, then tap on that. Saves the thread. Keep going!

@garrettsargent4097 Год назад

I absolutely love the damned explosions, stoked to see how this build comes out!

@olimitchell01 Год назад

Man like Mike 🔥🔥🔥

@KielFender16 Год назад

Headlight looked great Mike, good shout with the 240 grit first it was quite bad in the end, great result and hope the little bit of info I could provide in the last video helped contribute 👍 this thing is gunna be sick

@MichaelSabo Год назад

Thank you man; it definitely helped!

@Stergos69 Год назад

Super impressed with the light

@juliodelira7531 Год назад

Can’t wait for the next video !! Great video 💯

@letsgobrandon6969 Год назад

Get sunf tires also wheel spacers they make a massive difference

@Home-Roots888 Год назад

Happy new year! 👍

@MichaelSabo Год назад

Happy New Year!

@shepss217 Год назад

Headlight looks awesome! Nothing more satisfying

@davidstoner27 Год назад

@Tele-gram-me-Michael_sabo1 lol dumb bots

@fmscooter768 Год назад

omg the compilation around minute 5 as you where removing the stuck Nut made me laugh so hard, these sounds uhhh ahhh bäng bäng ouch uhhh ahhhh , very good, you have a nice sense of humor!!

@MichaelSabo Год назад

lol, glad you enjoy it man!

@RealSuburbanCowboy Год назад

I don't know why, but I love the garbage can toss scenes! Love the channel! That sticker removing stuff "Goof Off" will do that to headlights! Again, MOTHERS mag polish will clean up that headlight lens.

@cavanjenne5219 Год назад

This build is coming along great

@wvstreets6627 Год назад

It’s hard to believe mike is only at 175k subs, love his content, keep ‘em coming my man!

@MichaelSabo Год назад

Thank you for the love man! Hopefully we can double that this year 💪

@ALDA2479 Год назад

1rst day of the year and we get a video good shit never a bad day when Sabo drops something

@ps360bros Год назад

Mike, when trying to remove tierods, take the castle nut off, flip it, and screw it back on flush with the end of the threads, then you can hammer without worrying! Just like you did with the rear axel

@MichaelSabo Год назад

That's a great tip if you don't have the ball joint separator but once I got that tool, if it doesn't break right away with some light taps I just go right to it

@ps360bros Год назад

@Michael Sabo I agree, the tool is the way to go, when it comes to my jeeps I seem to always ruin the boot, but it's usually clapped out anyway lol

@marcuswright6543 Год назад

Mike u should clear coat the headlight it will look & protect it longer, luv the channel, help me with alot of projects

@MichaelSabo Год назад

I appreciate the tip and the love on my channel man!

@jonasbarcat617 Год назад

I have a Yamaha Blaster blue color, it’s an incredible machine. Watching and enjoying all this serie

@la_plata3588 Год назад

Damn the light cover came out good man

@MichaelSabo Год назад

Thank you!

@arlo12345678910 Год назад

11:55 nice job Sabo!

@MichaelSabo Год назад

greatest tool ever man!

@kartguy Год назад

Great job on the headlight and plastics bud! Really killed that headlight though hell yeah!

@MichaelSabo Год назад

Thank you man!

@mikeolson7188 Год назад

Axle removal method was Def on point Michael,and your headlamp lens restoration looked great,be sure the headlight socket grounds good to the metal part of your headlamp housing,looked like there was a bit of corrosion where bulb assy sets in place which could cause bad ground

@JaxsonM22 Год назад

Love the channel man!!!! Keep it up

@Jonny2Fingers Год назад

Happy New Year! Love the new drop!

@MichaelSabo Год назад

Thank you for watching and Happy New Year!

@jdwilson533 Год назад

Love this content… takes me back to watching this type of stuff on motor trend

@elboss123456 Год назад

Happy new year to you too. your videos are greatly detailed and explained very well, thank you

@coastalenduro Год назад

These videos just keep getting better!

@brandogdewhite6355 Год назад

You never know, this may be the year you hit 1M subs

@janjensen3810 Год назад

Godt Nytår

@jefferybye2169 Год назад

Happy New Year to you and your family Mike from me and my family..thanks for the video on New Years Day..you rock dude..🤘🤙👍🍻

@MichaelSabo Год назад

Happy New Year man! Thank you and your family for watching my video!

@c0munguyforcaz Год назад

First video of the year! 💪💪

@MichaelSabo Год назад

🤘🤘

@drdanger95 Год назад

MIKE UPLODAD ALREADY IM DYING

@clappedhouse4098 Год назад

I love these videos and the sound effects

@MichaelSabo Год назад

Thank you for the love man!

@michaelmcbride7789 Год назад

Excited to see the result!!!

@itsjustslide5528 Год назад

Hope u had a good new years man 🎉❤

@MichaelSabo Год назад

Likewise brother!

@arcencieltheonly Год назад

i love your videos so much, hope this amazing thing can be top quad!

@MichaelSabo Год назад

Thank you so much for the love on my videos!

@scotthall8850 Год назад

The light looks good!😊

@kernelbadness Год назад

Love this series and build so far bro! Happy new year!

@ronniewilliz153 Год назад

Handlebar lights are nice, cus you can see when you turn. If not you have to wait untill ur all the way turned to see what's around the corner lol.

@MichaelSabo Год назад

Very true; having one fixed and one on the bar will probably be really nice.

@ronniewilliz153 Год назад

@@MichaelSabohey are. I had three on my foreman 500 and it was nice.

@jordanpanich Год назад

Nice work!

@MichaelSabo Год назад

Thank you Jordan!

@snapfish89 Год назад

I'd run a steel rod threw the rotor and the sprocket to lock the axle in place. This works on automobiles as well.

@MichaelSabo Год назад

That's a great method too

@slaunts9453 Год назад

Love the videos. I was a professional detailer for years. I don't recommend using carnauba wax on plastics, especially clear ones. The wax will soak into the pores and turn yellow. It only takes about 4 months, then they will have to be polished again. I recommend using a 3m finishing polish, or something like meguiars 205 for the last step. Then a synthetic sealant, or ceramic coating is the way to go. Even a cheap ceramic coating from amazon should work great for UV protection.

@christopheravery5808 Год назад

I really want to see you do an LT250R and a Tecate 4. A head to head shootout between the 250R, blaster, banshee, Tecate, and LT250R would be interesting. I’ll have my channel started very soon and if nobody does that shootout then it will be on my bucket list. I’m just waiting on a couple more pieces for my 250R and then I’ll have videos up.

@MichaelSabo Год назад

It would definitely be an awesome series man!