Tech Guide - Fitting Your Chain

Подписаться 10 тыс.

Просмотров 6 тыс.

50% 1

Hi and welcome to the ICE Tech Guide Series.
In this installment, we are going to be looking at fitting and setting your chain length.
Before starting this process, make sure your ICE Trikes boom length is set correctly for the riders leg length. If you are unsure, check out the Rider Positioning Tech Guide here:
• Tech Guide - Rider Pos...
For further information on anything in this film or any other enquiries about ICE Trike products, go to www.icetrikes.co and fill out our contact form, or contact your local ICE Trikes Dealership.
Please Note: These videos are intended as a guide and assume competence of the person working on the trike. If you are unsure of your ability carry out the work, or of the safety of your trike please contact an ICE-approved dealer to carry out the work for you. Ensure your trike is safe to ride at all times.

Спорт

Опубликовано:

19 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@harolddorr56 5 месяцев назад

Excellent video! Clear, concise, well lit and good view of the important parts. This was very useful when installing a new chain. Showing the master link tool was a good tip, since my circlip pliers were not effective. One improvement would be to thread the chain through the chain tubes for the viewer. Thanks again!

@rowgler1 Год назад

Very concise explanation, answered all my questions. Thank you. I shortened the the boom on my wife's trike and it wouldn't go into the lowest rear gear, no matter what adjustments. I think I have to add one chain link.

@Icetrikes Год назад

Hi. Thanks for your comment. Just to double check, if you have SHORTENED the boom length, the chain would likely be too long and sagging. this would mean you need to look at REMOVING a link or two. (Unless of course you have shortened the chain already and it's now too short, in which case yes, you may need to put a link back in).

@thomashughes_teh Год назад

Thank You. I'm installing a boom tensioner to a different manufacturer's design to make my trike more family friendly. The tips and hints here were helpful. When I think upgrade; I think Ice Trikes.

@user-ez6ib3wm9b Год назад

good

@MuttiPolpa 10 месяцев назад

Thank you. That will help me. My DualDrive has passed away. Which Rohloff chain tensioner is compatible at the adventure (they offer three)?

@Icetrikes 9 месяцев назад

Drop us a message on our website aftersales form and we can look into this for you. www.icetrikes.co/contact

@petervick4775 2 года назад

What trike stand are you using?

@Icetrikes 2 года назад

The stand is a one off prototype we looked at producing a few years ago. I'm afraid to say it will will be remaining 'one of a kind' for the time being.