Save money don't repalce the whole tensioner, replace the bearings on the pulleys. Tensioners cost a lot of money but the bearings can be replaced quite easily.
#SKFUSAInc @bundysgarage #sbelt
Order bearings on Amazon (affiliate link for me):
amzn.to/36jcmKJ
A drive belt tensioner is a pulley mounted on a spring mechanism or adjustable pivot point that is used to keep tension on the engine belts. Spring tensioners are designed to tension automatically while the pivot design types can be adjusted manually. Both are used to keep tension on the engine serpentine belts so that they can drive the various engine accessories.
When the tensioner has an issue, it can affect the how the belts drive the pulleys which can affect the performance and functionality of the vehicle. Usually a bad or failing tensioner will produce a few symptoms that can alert the driver of a potential problem that should be serviced.
1. Grinding or squeaking noise from the belts or tensioner
The most common symptom of a bad or failing drive belt tensioner is noise from the belts or tensioner. If the tensioner is loose the belts may squeak or squeal, especially when the engine is first started. It is also possible for the tensioner pulley or bearing to wear out, in which case the vehicle will produce a grinding noise from the pulley.
2. Unusual belt wear
Another symptom of a potential problem with the drive belt tensioner is unusual belt wear. If the drive belt tensioner pulley has any sort of issue it can cause unusual and accelerated wear on the belt. A bad pulley can cause fraying on the edges of the belt, and in severe cases can even cause it to break.
3. Belt-driven accessories fail
Another symptom of bad or failing drive belt tensioner is failure of the belt driven accessories. Many of the engine’s accessories, such as the alternator, water pump, and AC compressor, can be belt driven. A seized or loose drive belt tensioner can cause the belt to snap, which will disables those accessories and can cause problems such as overheating, a dead electrical system and battery, or a disabled AC system. Usually a belt that has failed because of the tensioner will have to be replaced, along with the tensioner, in order to restore full functionality to the vehicle.
A drive belt tensioner is an important component as it is what keeps the belt properly tensioned so that it can properly drive the vehicle’s accessories. If you suspect that your drive belt tensioner may be having an issue, have the vehicle inspected by a professional technician, such as one from YourMechanic, to determine if it should be replaced.
Bundys Garage Honda Acura V6 J Series videos:
Timing Belt for J Series Honda Acura V6:
• BEST DIY Honda Acura V...
Transmission Fluid change J Series Honda Acura V6:
• 99 - 04 Honda Acura Ac...
Head Gasket J Series Honda Acura V6:
• Honda V6 Head Gasket R...
Head Gasket Installation J Series Honda Acura V6:
• Honda Acura V6 Head Ga...
Thermostat J Series Honda Acura V6:
• Honda Accord V6 Thermo...
VTEC Solenoid J Series Honda Acura V6:
• VTEC Solenoid Leak & R...
Timing Belt Tensioner Choice J Series Honda Acura V6:
• Honda Acura V6 Timing ...
Tips & Tricks Head Gasket J Series Honda Acura V6:
• Head Gasket Replacemen...
More About BundysGarage:
goo.gl/qv3Wzc
Questions, Comments, Concerns:
bundysgarage@gmail.com
Twitter:
/ bundysgarage
@bundysgarage
On The Web:
www.bundysgarage.com
Music by Randall Kent: As seen on NCIS
• Randall Kent - Going H...
All Rights Reserved 2020
© Copyright 2020
Bundys Garage
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part with out the express written permission. Contact: bundysgarage@gmail.com
DISCLAIMER - DISCLAIMER - DISCLAIMER
Due to factors beyond the control of BundysGarage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. BundysGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. BundysGarage recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of BundysGarage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the end user and not BundysGarage nor any of it’s subsidiaries.
1 янв 2020
