TESLA BASED ENGINE - UNCUT TEST EDITION

Подписаться 277 тыс.

Просмотров 336 тыс.

50% 1

TESLA BASED ENGINE - UNCUT TEST EDITION
Our previous video has had a huge impact all over the world. Everybody wants to buy the "Liberty Engine 2.0" but unfortunately we can't sell our prototypes. But in this video we are going to launch the first long non-stop test of our perpetual power generator. This long version of the quiz was only available to our channel members and we decided to post it because our video reached great interest
Please note that we cannot sell our prototypes, but we must warn you that we have detected several fraudulent companies that try to scam people by saying that they sell copies of our Liberty Engine, but those copies do not work. BE VERY CAREFUL NOT TO GET SCAMED
INDEX:
00:00:00 Introduction Nicola Tesla
00:25:10 Manufacturing link of the "Liberty Engine 2.0"
01:13:00 First full test of "Liberty Engine 2.0"
08:27:30 IT WORKS!
13:50:00 We disassemble the motor to check that there are no hidden batteries
19:53:00 BEWARE OF SCAMMERS
20:04:00 Acknowledgments
We want to thank all the members of our channel, but especially the Elite members:
- John Hughes
THANK YOU!
__________________
TURN ON SUBTITLES. THEY ARE TRANSLATED INTO SEVERAL LANGUAGES
-----------
- If you want to see the raw edit of the engine tests, you can watch this video (Members Only)
• Liberty Engine 2 - Lon...
- - To become a member of the channel click the following link:
/ @thelibertyengineproje...
----------------
Warning: The use, copying, manipulation or transmission of this video or part of it without the consent of the author is strictly prohibited. This video is protected by copyright.
HOW WE RECORD OUR VIDEOS
-Sony RX10 IV: amzn.to/3VDUXFg
- iPhone 14 Pro Max: amzn.to/3CipqSi
- K&F Concept Tripod: amzn.to/3YSvMBP
- Cayer FP1450 Tripod: amzn.to/3C7gIWX
- Display Batteries: amzn.to/3IgeoRt
- Screen for Sony FEELWORLD F5 Pro V2 camera: shorturl.at/aQSZ9

Наука

Опубликовано:

23 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 899

@mateoalejandropenalozatorr8988 4 месяца назад

Espectacular,no pensé que hubiera un canal que haga esto.

@knowledgewind Год назад

no change in motor rpm when light bulb is connected very good lol

@goofyvids2978 10 месяцев назад

I Loved this TEST!

@user-pg8rz8ge4t Год назад

Автор умышленно не сказал про сплава. Есть стандартный сплав Алюминий-серебряный. Марка AlAg10 - на одну часть серебра - 10 частей алюминий. Можно и самому сделать сплав. Сначала плавим алюминий, ровно 10 частей, как только алюминий расплавиться полностью - добавляем 1 часть серебра. И по возможности плавно мешать, чтобы получить однородную смесь сплава. После этого, аккуратно сливаем в заранее опок для отливки этого сплава. А там уже идет остывание и обработка на токарном станке.

@theredeemeriam Год назад

How did this alloy come to be? For what purpose was it made and are there any videos of this alloy?

@Oque.Nos.Somoss 9 месяцев назад

I'm just waiting the price to use at home as main source of energy for the next years. That's all. Thank you guys and congrats for this amazing project!

@neomatrix4920 Год назад

Perpetual motion (AKA free energy) is very real. The motion of planets in the universe have maintained their motion for billions of years. I've never heard of their energy running low or their batteries need changing, dispite running with clockwork precise motion for billions of years.

@shaynegadsden Год назад

Seems you don't know much about the stars then because they aren't infinite our solar system works just like any other machine powered by a gas engine it will run out of fuel eventually

@candycrush1320 Год назад

Consideraste hay vacío que evita el roce parte de la energía que se pierde en un sistema rotativo Pequeña diferencia a proyectos en la tierra

@yjj9240 Год назад

The operator must test the generator by placing it on a transparent glass table with a view of the floor. If it still works I'd trust it.

@saidlhouwari9678 Год назад

Merci beaucoup de nous avoir exposer votre projet,nous aidant a faciliter notre vie quotidienne.merci beaucoup et infiniment.

@user-nn3ht3cw1c 11 месяцев назад

great job. great job. i will have to see this.

@miguelrivera1322 Год назад

Maravilloso, Maravilloso increíble, mucho de hacer y pocos, saben

@renatotan6718 Год назад

Wow amayand great work....I love it

@NoxAllan Год назад

Oooh my God..this is awsome

@alenpasnikov Год назад

Can the rotor be made with other materials, I don't know physics but maybe plastic or something else that has a big mass if that is necessary?

@9612jimbo 11 месяцев назад

Wow I love it ✊🏼

@kalan0921 4 месяца назад

Hi! What alloy is the rotor made of? What percent is silver and what percent is aluminum? How much does the structure cost? Can it be purchased?

@michaelmarino3270 Год назад

CONGRATULATIONS !! Thank YOU

@thelibertyengineproject7966 11 месяцев назад

Thank you!!!

@samuel_towle Год назад

The rotor is a shell of prefamulated amulite containing a turbo encabulator and reciprocating dingle arms driven by a sinusoidal waneshaft.

@MRGF78 Год назад

😅😅😅good one

@danielshively9778 Год назад

This needs to be released to all of us so we can build them and give them to people...power to the people of earth...free energy...this will boost humanity....

@heinzpg Год назад

Why should such fakes be released to the people? Only very gullible people without competence in physics can believe that this really works.

@SaeedAhmed-vs3vf Год назад

اچھی کار کردگی ہے ایسا ہوسکتا ہے. ممکن ہے. بہت خوب

@zombiehunter666 9 месяцев назад

Even Nikola Tesla knew and could not circumvent the laws of thermodynamics.

@barnabaspavel9930 11 месяцев назад

Tesla valóban fantaztikus elme volt akit már később majdnemcsak űldöztek, a találmányai miatt. Ha ez valóban megvalósítható és nem kamu akkor tessék mihamarabb a licencjogi dolgokat rendezni, tömegével gyártani, hogy mihamarabb eljosson egy átlagember otthonába is. Hiszen mindenki tudja hogy hogy Telsla-nak pontosan ez volt az életfilozófiája. 🤘🤘🤘

@marcusduffner9953 Год назад

Any thoughts about to upscale this with a 3 phase 380v engine?

@robertleach6402 Год назад

If this is true, you will need a security team. The love of money is truly the root of all evil. Tesla tower destroyed, titanic sunk.

@mememan2344 Год назад

I am going to bet you $1000 we will NEVER see this released to the public for sale, not even by this channel. Making unverifiable free energy devices and posting videos is a profitable niche, and you can do it over and over again forever, for years.

@timverbijtubes Год назад

Verify by making one yourself, if it works make it for people u like, it will take over, hydrogen is easy to do yourself, this takes more knowledge and skills

@wskibbe5903 Год назад

Es wäre DIE Lösung ALLER ElektroenergieProbleme!!! 😊

@ERIC3151 Год назад

@@mememan2344 pois é, realmente isso é uma farsa das mais baratas que já vi na internet.

@TakiSobieZiomek Год назад

Zgniecie

@verygoodvibes Год назад

liberty engine project, what model and serial # motor are you using, as it says on the nameplate on the motor?

@HaraldMoeller Год назад

thx for this video and how much energy does the generator generate under load?👌

@apostolosgrigoriadis6218 Год назад

IS THAT THE START OF THE END OF ELECTRIC COMPANIES? I HOPE YES.

@akarslx545 Год назад

nope its impossible. Who will ensure or supply continuity? I hope Electric&Energy Companies and Corporations

@awesomejob4209 Год назад

Humans are to greedy they won't let this happen.

@manuellegaspi1419 Год назад

Multi billion start locate this blogger, either pay him and stop what they build it

@manuellegaspi1419 Год назад

I explain to you am power lineman,power generation in intire world so many way, always start the small amount of voltage,from 13kv to become five hundred kv,then supply to consumer step down by transformer to different place,with positive and negative force did you think this is impossible.intire world working in +and negative or south and north magnetic force.

@duediligence791 Год назад

@@awesomejob4209 it doesn’t work this is a Con because the laws of physics wouldn’t allow for this pseudo science to work. You’re just another person who’s fallen for the age old snake oil salesman.

@nagyzoltanzolika1351 Год назад

I have already started building a copy of the prototype. Three weeks and I'll post. Welcome from Hungary!

@MultiMArky14 Год назад

waiting on your channel

@aiweiweiaiweiwei2985 Год назад

As for this one, it will work when an external force is applied to it like when converted to wind or hydro energy. Max energy you can get from it with this type of build when using hydropower is about 2kw. or 2.5kw if properly designed, making the magnets close to the coil, will generate more energy.

@scorpioo7350 Год назад

LOL 230V like from the mains socket, to learn more you just have to become a patron 😂

@travismoore7849 Год назад

I wish we all had free energy devices in our homes.

@007Vision Год назад

Will be a great idea to post the material list and procedures for free that way it will be guaranteed that can be mass-copied and nobody disappears when something good hits the market ...so many inventors disappeared after their projects went public and no information was given and all records went into thin air.

@user-xb3fy2eq7g 11 месяцев назад

nice Movie FX. the motor get slower and slower. but a little error in picture , again over again XD XD XD XD XD

@renatotan6718 Год назад

You have a good and grate idea to save some power or energy cause we need that for our mother earth

@saturnx311 10 месяцев назад

It's beautiful

@rogeriocarvalhodossantos3525 11 месяцев назад

Hello mr inventor, and are the batteries inside the square tubes?

@alicankarahanli4567 11 месяцев назад

very good !

@zis. Год назад

Если подобные изобретения будут применены к транспортным средствам для получения электрической энергии, мы сможем путешествовать по миру бесплатно.

@eivindlindefjell5602 Год назад

If u are stupid anof to belive in scamers

@_TOGA_ Год назад

Подобные "изобретения" рассчитаны на технически безграмотных и доверчивых людей, чтобы на них заработать деньжат.

@damoia330 Год назад

Sem cortes né? 12:56 exatamente no momento que "desliga" basta olhar a luz refletida na bancada...

@marceloarrascaeta4411 Год назад

Hola buenos días, cuánto tiempo a estado en marcha el prototipo? Que amperaje obtienen? Temperatura de las bobinas? Si es elevada estaría bueno colocarle unos ventiladores con disipador para evitar el recalentamiento, de que material esta hecho el núcleo del rotor?

@ximp8702 6 месяцев назад

Too bad you can’t share us the rotor’s alloy composition, I was so excited, maybe you will in the future!

@zbigniewteterycz1571 Год назад

SUPER IDEA .

@vlmmoa Год назад

Your fan works great!................

@Arjuna86004 Год назад

At 1:32 & 1:39 I see what appears to be an induction coil. That and the careful placement of this apparatus on the table raises my suspicion that this "geberator" is being powered by a hidden induction source under the table.

@hugoperez851 Год назад

Eso es Con el Principio de magnetismo, cuantos imanes de neodimio usaste y de que tamaño

@RideWhileYouCan Год назад

the light bulb should flicker since you did not integrate a voltage regulator, thus putting load on that engine should slow down the rpm of the engine.

@pacificazo 6 месяцев назад

Asumiendo que es posible, cual sería la diferencia si utilizo las bobinas de un sistema que aprovecha el movimiento generado por el viento y lo retroalimento con ese motor para reemplazar la energía mecánica del viento? Solo pregunto.

@nikoseen 6 месяцев назад

How many turns each transformer has, and what is the diameter of the copper cable used of each?

@Ledsrule1 Год назад

Now for the final TEST. Hook one end to a Dynamometer or is that in a future video

@RickRandRMarketingllc Год назад

Question; there are only four coils on the motor which is supposed to have enough power to drive a 20kw gen, is it going to produce enough current with just 4 coils? Compare that to a 25hp electric motor, it would have at least 10 times the coils to produce enough current to turn a 20kw gen. What am I missing here? Okay, say its 30% more efficient then you need 30% less coils, but is there enough still for powering a 20kw generator?

@rttp-righttothepoint6656 Год назад

that is the magic of tesla tech. It blows what we are taught as pinnacle in sceince and tech, and says you liars, I made machines 1000x better 100 years ago. The suppression of the math physics and knowhow is delibrite. Anyone who dreams otherwise is childish and ignorant. Why else do you think he can't just release all his info of his creation. People paid by govt and huge companies will stalk and terrorize this man and do everything they can do debunk him. Clearly this guy knows whats up in terms of potential attacks. Covering all body skin so no scars or moles can be analyzed. If they get his address they could easily sned a virus to erase all his data on his pc, setting him back god knows how far. If he ends committing suicide in the next 6 months due to depressioon or some story, we will know that its murder.

@fernandoelcubano1410 Год назад

Cuanto es la mezcla de plata y aluminio para la fundición?

@jimleggett9081 Год назад

My main question, is could you make the rotor out of hard wood or heavy plastic? This would also not have any eddy currents I beleive?

@kentdesrochers4052 Год назад

My thoughts exactly. Especially with the use of a 3d printer

@JeffEckhardt-on6vu 11 месяцев назад

What gage wire is used to connect the transformers to each other? 12000 W @ 230 V = 52.174 A. Shouldn't that be 6 ga. Wire? Didn't look any bigger than 10 ga. to me.

@gato-de-schroringer Год назад

Congratulations ! I 'ld like sugest you put this motor runing inside a tranparent and closed box , and put this box inside the boat floating on watter by hours using a thermal camera screen 1 and normal camera scren 2 . A normal camera under water screen 3 . Using a resistive charges like heater on limite of generator capacity and do 3 hours of cutless live in all angles in speed camera . Would be interesting we can observe the thermal variation of all parts of the mouter . The resistive charge on limite of power generating will show us there is no hidden wire . This one get heater and be visible on thermal camera .

@extrap51 Год назад

This type of technology has been made a few times now but it normally is kept secret by the inventors, they are then bought out, or bumped off. This technology needs to be put out for everyone to see like this so it will be seen by everyone and it won’t be kept secret anymore.

@ExplainingTechTips 10 месяцев назад

If earths magnetism is stolen and turned into heat the earth will lose its protection and become like mars

@MichaelWilkinsons 8 месяцев назад

Why are not the two horizontal coils not connected? Like in the schematic in the a later video.

@jomar8969 Год назад

This plus a hydrogen generator and the oil industry is Crushed! Not to mention LESS poluttion!

@deepmajumder9510 11 месяцев назад

u are next generation bro

@amd6027 Год назад

very good

@faizanbutt6906 10 месяцев назад

Good job

@coacohover 4 месяца назад

question will that still work if it was hit by an eletromagnetic pulse wave or will it be totaly trashed like all other eletronics reason the question is some solar flare storms can cause emp waves.

@hronex Год назад

Why left and right coils don't connected?

@alenpasnikov Год назад

Waiting for V3 without the silver/aluminum alloy or instructions on how to create the alloy.

@yarrick88 7 месяцев назад

How are those transformer coils giving you a 220vac ????

@awakewakeupnow4106 Год назад

That means, we can also put this System on a car right?

@caepncrunch3741 Год назад

Ok, the big question is now, what are you doing with this? Will it be sold? Mass produced? Or do you keep it for yourself? Will it be OpenSource? In case of selling, how much will be the price?

@xLopez210x Год назад

It’s a prototype, plan of action isn’t even in the works yet

@machineman268 Год назад

It will never be for sale.

@sciencesymphony9766 Год назад

Please "Liberty Engine Project", please explain, why only 2 of the 4 Microwave coils have been connected in this running prototype. DOES THE LIBERTY ENGINE 2 ALSO RUN WITH ONLY 2 MIRCOWAVE COILS INSTEAD OF 4 COILS ???

@emilposa9805 11 месяцев назад

For all the people they think these runs buy battery inside that is no batteries inside the guy's not lying and he doesn't have no batteries inside to run this machine that he made this is done by project by my great-grandfather Nikolas Tesla so this guy what he's making here is not lying

@chaorrottai 11 месяцев назад

nikola tesla had no children and died alone in motel...

@shanejenkins4446 11 месяцев назад

i don't know what your on but it must be good lol he had no kids lmfao

@pichoarauz8028 7 месяцев назад

Voy a hacer el mio, seguire la leyenda y reglas “La energía ni se crea ni se destruye solo se transforma” bendiciones para todos los que hacen posible que nos llegue esta información, tenemos todo en este planeta para construir y tranformar energia, tenemos todo cuidemos tambien nuestro planeta.

@melchorobamaengurubisie9219 Год назад

Que curioso jjj , yo tuve la misma idea el año pasado y resulta que ya existía 😮

@dselectric6989 Год назад

설계나 디자인 특허 등록한뒤 양산형 모델이 나오면 구입하고 싶네요.

@walterbendmydick-ts8mh Год назад

WHAT CONDENSOR ARE YOU USEING FOR STARTING TORQUE.

@RickRandRMarketingllc Год назад

Question, why does he show a volt meter when what we really need to know is the amps?

@philipmundacruz5743 Год назад

what is the purpose of coil from left and right side if it not also connected from the motor? so the coil from up and down side only should be connected? please i want to know why. and also can we see the details of the motor too

@AdrianJasko-cr6gb Год назад

Yes, two coils are disabled, why? I want Make one

@scamchan 10 месяцев назад

2 coils for motor 2 coil to generate power - yet with so few magnets I don't think it would work as it is displayed for real strong power generation.

@wilmarreyes5962 Год назад

Ok, sir, thanks for the video..gain lots of viewers,. Develope your project. Add more ideas and effort to allow others though to do the same untill to make it in reality..thanks you were amused Us.. keep strive!!

@LuisCarlos-ej8dc 17 дней назад

Ola boa tarde no video eu so vejo vc conectando os cabos na bobina da parte de baixo e as outras 3 como e ligada??

@mirosawkazmierczak9153 11 месяцев назад

Why didn't you lift it up while the device was working?

@alexovcharenko2206 11 месяцев назад

Или лампочку слабую для показа начала генерации.😮

@DiegoAlves-kl7lc Год назад

ola , vende um e book com esse projeto com todos materiais e medidas?

@hnbgyhf5342 9 месяцев назад

Please what is the name of the music at 18:50

@mariosergiovarelahoffmannv1120 Год назад

Tamo junto mano 👏👏👏

@moineagu1 Год назад

IT IS BEGINING. FREE ENERGY MAGNETIC GENERATOR!!!

@user-sg8te3oo8e Год назад

سوف تكون ثوره في عالم الطاقه

@rcninjastudio Год назад

next week I'll be showing you how to turn lead into gold, all for the small fee of a youtube membership

@allendaigle6351 Год назад

HaHa I bet this guy has got a bunch of snake oil

@sissokoabdoulaye6688 Год назад

Félicitations,c’est du bon boulot. Comment pouvoir fabriquer ce type d’engin. On en a besoin dans les Endroits éloigné et pour ça on a besoin des plan svp si possible évidemment

@TravisTellsTruths Год назад

It is beautiful

@lucientjinasjoe1578 Год назад

Yes I know what you think but it is still electric through magnetic flux but I meant direct magnetic flux coupling management

@franciscoclaro4184 11 месяцев назад

Cómo puedo adquirir un equipo, acá no tengo posibilidad de construirlo. Donde lo puedo comprar dígame el sitio. Gracias

@peakprod7497 11 месяцев назад

This is an ac motor supposedly driven by an ac generator. The speed of the motor is set by the frequency of the generated ac, So how is the speed locked to give 240 volts at 50 cycles?

@off6848 10 месяцев назад

It's done at the DC out bridge rectifier. And the weight of the rotor. In Robert Adams original design he used a rotor made of foam and claimed 130% efficiency and RPMs exceeding 12,000. Its supposed to lock into speed by starting open circuit then applying a load then taking the load off again which makes it hit "pulse resonance". There are videos of this phenomenon happening just look up Robert Adams generator.

@markoifebo6623 10 месяцев назад

LOL !🤣 Mais bon, quand même !😯😲😳🥺🥱

@yatikidinz6015 11 месяцев назад

I bealive, this is true 👍👍👍🙏🏻

@SUNRISE.with.NATURE 9 месяцев назад

It's rotor have secret, it's rotor contains neudanium magnet inside the aluminium rotor, and those magnets feild is runing by Ed current which generated whenever aluminium rotor rotating, it's make high frequency energy in coils

@jonpasza3570 Год назад

Świstak siedzi i zawija te sreberka, a Tesl w grobie sie obraca 😜

@PRospond Год назад

I'm sorry for Tesla, God bless his soul. LMAO

@SharhbiniRauf Год назад

Make backpack size, connecting with power tool like welding, drill, ect that will make field engineering worker become more easy, without need long cable connection

@melborja5152 Год назад

can you make a video on filter water or purify water?thanks

@diegodsampaio Год назад

Olá, a tu casa é abastecida com quantos motores desse?

@MrJoseram Год назад

yo creo que si compras un generador a nafta que ya viene preparado para dar energía y lo auto alimentas sin tener que utizar el motor a nafta es mas fácil igual seria bueno que conectaran una luz y ver cuanto tiempo se mantiene prendida sin que pierda tensión ni se queme el motor

@greychampion3075 Год назад

The fact of the Silver/Aluminum alloy intrigues me. It would be Valuable to know the ratio

@Jack_Smith_Yes Год назад

Obviously the amount of silver must be very low and the alloy made in a special way. They are waiting for something i think.

@theredeemeriam Год назад

It must have been something that was already made, that they tried and found out it works. I doubt it was something they came up with and made themselves. So there must already exist this alloy that is used for something else. Has anyone looked into trying to find such a metal? Also does the extended version of the video that you can only get by signing up, have any info on this that you can't get unless you sign up? I did a little research and found out there are mixtures of 5% and 10% silver so I am guessing it may be one of those. This is kinda stupid how they are going about releasing a video on a working model but not giving out key information. If it's open source then it should be all there for everyone to know what parts are needed and where to source them.

@ebsman Год назад

Would it be possible to encapsulate the bearings in a plus and minus magnetic rings to reduce their wear to zero....or is this a silly question?

@savemars4383 Год назад

It is a silly question, but only because this video is a con. He has a coil under the table that is powering it. He proved it when he showed it at 228v. It is main/grid power.

@stevegreengrass7727 Год назад

Savemars is the one with the silly answer! It shows you don't research & watch his other videos, as he does an outdoor test on a river bank, & he also lifts the machine up & carries it around while it is running! There are way to many ignorant people on this planet who are just too lazy to spend 20 mins researching! 🤣

@roypaglinawan2306 Год назад

How about the power output?

@dragonflame332 Год назад

make sure that you work together that such things do not stand out and you had only just started and by that I mean the electrical wire that is pulled taut without pulling on the other side 2.40 / 2.45

@edwardclark3980 11 месяцев назад

It's about time someone made this. Now how do you shut it off.

@user-uv7cv3ti9j Год назад

Wouldn’t it be possible to short-circuit the coils at opposite poles of the rotor of the installation? The upper and lower coils clearly have different poles, and the left and right coils are generally made for the sake of appearance. It seems that this whole installation is just a dummy. If the north and south poles are connected in parallel, then there will definitely be a short circuit and the motor will stall and will not spin. Or is the video intended for those who do not know how asynchronous motors work?

@gato-de-schroringer Год назад

No no my friend! If you pay more attention you ll note the magnets of the rotor is configured N , S, N, S. Then , when the magnet N be in upper coil this one be oposite N to reppel the magnet . The same is to the S pole ! When this be on the lateraly coil this one will be S trying to repell it . Therefore the configuration is below : coil1 mN C4 = mS mS= c2 mN C3 Group 1 (Coil 1 in serie with coil 3 ). Group 2 (Coil 4 in série with coil 2 ). Serie / paralel : Group 1 in paralel with group 2 Group 1 in serie with group 2 . All depends the input and frequency mouter you can regulate the output coils according to this settings . If you note the short circuit output , is easy to solve this problem . Just invert the output polarityes from ( - ++ -) to (- + - +) as we do with batteries.

@savemars4383 Год назад

@@gato-de-schroringer for someone who claims to know slot about this stuff you should know how this is working. First off it is powered by 220v ac at 50hz. He hooked both coils, and motor together. The bottom coil is being powered by a coil under the table. That in turn powers the top coil and the electric motor. The electric motor is probably doing 90% of the work to turn. How did you not know that?

@gato-de-schroringer Год назад

@@savemars4383 negative ! You can't say nothig about frequency . You can' t presume the frequency is 60HZ ( you meant) only becouse you did read 228 v AC . The secret is you sicronize the generator output frequency with tbe mouter input frequency AC . How bouth of it is copled by same axle then you may presume easily the mouter and generator RPM are the same . The generator at X RPM must to produce the same voltage required by mouter at same X RPM . If the RPM of mouter had lower or higher value of that of the generator , the sistem would not be sincronized and the poleys must be instaled and dimensioned to correct diameter for that mouter receives 228 v AC and generator produces 228 v AC . Just the wattage or power of generator must be higher than mouter .

@user-uv7cv3ti9j Год назад

@@gato-de-schroringer Something tells me that this device will not work in real life and the north pole will never work with the south pole, they will repel each other and cause a short circuit in the system.