SECRETS AND MANUFACTURING PLANS OF THE LIBERTY ENGINE 2.0. English version

Подписаться 283 тыс.

Просмотров 316 тыс.

50% 1

SECRETS AND MANUFACTURING PLANS OF THE LIBERTY ENGINE 2.0. English version
LIBERTY ENGINE 2.0 NON-CUT PERFORMANCE TEST.
PLANS AND SECRETS OF THE LIBERTY ENGINE 2.0
Many subscribers have requested the plans with measurements of the "Liberty Engine". You have also asked us for the electrical diagram. Others ask us to say what is the exact composition of the special alloy with which we have made the rotor. And others have asked that we do more testing and take measurements of voltage, frequency and power. Well here you have the most anticipated video of the century. We hope you like it...
Please note that we cannot sell our prototypes, but we must warn you that we have detected several fraudulent companies that try to scam people by saying that they sell copies of our "Liberty Engine", but those copies do not work. BE VERY CAREFUL NOT TO BE SCAMED
__________________
TURN ON SUBTITLES. THEY ARE TRANSLATED INTO SEVERAL LANGUAGES
INDEX:
00:00:00 Intro
00:33:00 Questions
00:38:00 FAQ 1: Can you provide us with the electrical diagram of the "Liberty Engine"?
00:52:00 FAQ 2: What are the technical specifications and power consumption of the "Liberty Engine"?
01:34:00 FAQ 3: Can you demonstrate a high power load test simultaneously?
19:06:00 FAQ 4: What are the transformer specifications?
19:35:00 FAQ 5: Can you show the mechanical blueprints of the "Liberty Engine?
20:01:00 FAQ 6: Can it generate 110 volts?
20:26:00 FAQ 7: What are the rotor dimensions?
20:51:00 FAQ 8: What are the magnet dimensions?
20:58:00 FAQ 9: What is the exact alloy of the rotor?
21:33:00 FAQ 10: How can we purchase a prototype?
22:28:00 FAQ 11: If they are patented. Don't they expire after 20 years?
23:24:00 Thanks
__________________
If you want to have access to see the complete video without cuts of this performance test of the "Liberty Engine", you must become a Member of the Channel. Only then can you enjoy this exclusive content:
- Spanish version: • PRUEBA DE RENDIMIENTO ...
- English version: • LIBERTY ENGINE 2.0 NON...
- To become a member of the channel, click on the following link:
/ @thelibertyengineproje...
We want to thank all the members of our channel, but especially the Elite members:
- German F.
-Ciprian Seucan
THANK YOU!
__________________
Purchase links on "Amazon":
- Air heater 3000w 220v: amzn.to/3OHJbKb
- Energy Meters: amzn.to/3IG1njL
- Motor starter: amzn.to/3OExynf
- Driver Leds: amzn.to/435QSOK
- Digital multimeter: amzn.to/43nrW4Y
_________________
Warning: The use, copying, manipulation or transmission of this video or part of it without the consent of the author is strictly prohibited. This video is protected by copyright.
HOW WE RECORD OUR VIDEOS
- Sony RX10 IV: amzn.to/3VDUXFg
- iPhone 14 Pro Max: amzn.to/3CipqSi
- K&F Concept Tripod: amzn.to/3YSvMBP
- COMAN tripod: amzn.to/45u6uNs
- Display Batteries: amzn.to/3IgeoRt
- Screen for Sony FEELWORLD F5 Pro V2 camera: shorturl.at/aQSZ9
- Articulated arm: amzn.to/3opJSxc
- HDMI adapter for iPhone: amzn.to/45vCvVl
- Bresser pantograph F001483: amzn.to/3MUW16t
Electric generator
brushless generator
free energy
infinite energy

Развлечения

Опубликовано:

26 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,4 тыс.

@gabriele8158 11 месяцев назад

Hi, you did a great job! With my friend I'm planning one almost the same as yours, but mine will be 10 KW with larger magnets, the current can be selected 110/220v with the different sockets. The whole frame will be made of hard aluminum, the starting system is recoil like yours. I will use it privately, I will make prototypes to sell privately to all those who want to save money, for a house in the mountains, by the sea, etc. Good job everyone

@UnrealTransformer 11 месяцев назад

And i plan to build a universal motor that is driven by my undivided love that will put the whole world into the golden age. Yeah.

@simonallan9941 11 месяцев назад

And hopefully not mysteriously disappear 😮

@sonnyh9774 11 месяцев назад

I'm interested

@paulmoreau-wn8hz 11 месяцев назад

Will you ship to Canada? I'll buy one

@JRFrogman 11 месяцев назад

There’s a sucker born every minute 😢

@tomaszpiotrowski2532 Год назад

Brawo, dzięki za info

@piotrlisiak7205 11 месяцев назад

będziesz coś działał? to daj cynk..

@AMGchronicles 11 месяцев назад

Thank you for your generous good deeds. sharing ideas. I love your ideas of free energy and further helping people in hard times. I hope RU-vid doesn't ban you.

@pawesobolewski6249 Год назад

Dziękuję ❤

@piotrlisiak7205 11 месяцев назад

jakbyś coś działał..to daj cynk..sam jestem za cienki technologicznie..

@Optimiz_IO 10 месяцев назад

Alloy composition (With the help of AI): Silver: 77% Aluminum: 15% Copper: 5% Manganese: 3% Key adjustments: Slightly lower silver content to reduce electrical conductivity and minimize eddy current losses from induced swirling currents in the rotor. Higher copper content to maintain conductivity, but manganese added to counteract copper's tendency to increase eddy currents. Manganese additions also increase resistivity, which helps control eddy currents. Manganese provides good hardness and tensile strength as well, substituting for zinc. Lower conductivity alloy helps reduce magnetic brake effects from induced rotor currents opposing the rotating magnetic field. Other refinements could include: Trace boron or silicon for further resistivity. Grain refinement and heat treatment to break up the crystalline structure. Semi-conductive coating on the rotor surface to impede eddy current formation. Can anyone comment?

@McFlysGaming 10 месяцев назад

What question did you ask AI to come up with this equation?

@Optimiz_IO 10 месяцев назад

@McFlysGaming p0:In the context of a perpetual electricity generator, only knowing that the rotor prototype holding the magnets is made of an alloy composed of silver and aluminium for the rotor. a very important clue is that the alloy is composed mainly of silver and aluminium among other materials. The total volume of the rotor is 1073.3 cubic centimetres and it weighs 7.6 kilogrammes. also was applied special treatments to this alloy. Suggest what this alloy is made of and provide all the proportions for each compound. p1:Suggest a composition for this rotor to work in an optimum way in the context of an electrical generator. p2: Take into account eddy current and magnetic break, things we want to avoid for the alloy

@McFlysGaming 10 месяцев назад

I got this from AI If cost is not an issue, and the silver content needs to be more than 75%, the composition of the alloy for the perpetual electricity generator rotor could be adjusted as follows: - Silver: 85%-95% - Aluminum: 2.5%-10% - Copper: 1%-4% - Zinc: 0.5%-2% - Nickel: 0.5%-2% - Magnesium: 0%-1% - Titanium: 0%-1% - Beryllium: 0%-0.5% - Silicon: 0%-0.3% This composition would have an even higher silver content, which would provide even greater electrical conductivity than the previous composition. However, it's important to note that increasing the silver content beyond a certain point can also reduce the mechanical strength of the alloy, so this should also be taken into consideration. Again, the exact composition will depend on the specific properties and performance required for the perpetual electricity generator rotor, but this provides a general idea of how the composition can be adjusted to increase the silver content.

@happy2be3one 10 месяцев назад

My idea is 82%Sn, 17% Al and 1% Ag

@McFlysGaming 10 месяцев назад

@@happy2be3one Tin is a good idea but it’s mostly silver and aluminum. According to Artificial Intelligence, it cant have to much aluminum because it start to lose back emf impulse.

@tom4od Год назад

Weird how you’re like “here’s all the info you need to build this” alongside “we can’t tell you the exact details”. What’s your aim? If this is legit it would prove all the conspiracies right and mean you’re in grave danger. The only way to save yourself is by making everything freely available.

@dmann55398 Год назад

The aim is all the ads you watched.

@janengel1985 Год назад

@@dmann55398 correctly

@user-sw8lj4jn9c Год назад

😊👍👍👍💯

@wisdomafoolweakness3391 11 месяцев назад

I havent got an ad yet while watching this video

@zehlersan 11 месяцев назад

Very true

@ArturFreitas Год назад

Im in love with it.... Congrats!

@damiaussan 11 месяцев назад

Muchas felicidades! Gran invento! Gracias por compartir!

@drewnicest4319 11 месяцев назад

Amazing how when each heater was turned on the generator didn't bog down whatsoever. That definitely made me skeptical...

@user-kx7he3un6h 10 месяцев назад

I think there is a catch with the distribution outlet when it was turned on. If it is not connected to the network, the indicator should not light up. And why did it light up for a sec? Although, perhaps, the capacitor was discharged on the neon lamp!

@simplethings2410 10 месяцев назад

@@user-kx7he3un6h even if you only turn it by hand, there will still be a small generated voltage enough to light the lamp.

@user-kx7he3un6h 10 месяцев назад

@@simplethings2410 You mean lamp on the button of the power outlet? If you watch the video slowly, you'll see it. I plan to make a copy of shown "liberty engine" to prove or disprove the idea. It looks like two coils would be enough to power the motor!

@simplethings2410 10 месяцев назад

@@user-kx7he3un6hIt is just the two coils facing each other that is connected in parallel lights the lamp..and the other two coils connected also in parallel powers the motor..There is no electrical connections between the two sets of parallel coils. They are two different circuits..Whatever happens to the coil set where the lamp is connected, does not affect the other that is driving the motor. You can obviously see that in the electrical diagram.

@simplethings2410 10 месяцев назад

@@user-kx7he3un6h Watch the clip again and you will see that it is the light coming from the ceiling of the workshop reflects to the light button that is why it looks like that light it is enrgized prematurely. It is just a reflection of the light above.

@richardriska5536 Год назад

Super,ďakujem chlape

@Ikkimoto18 11 месяцев назад

Protect these men at all cost!

@chaoskiller1758 Год назад

Thank you for doing this great service, this engine will help me make a 2X version for my land and sea house that I will build some day. This would make a drone fly forever BTW!

@whoryou1131 Год назад

The millennium falcon power blender for wet bar

@abdelkader911 11 месяцев назад

لتطير حتى الأرض السابعة والعودة إلى مركز الأرض وهكذا دواليك وبدون توقف ايعقل. مع أن الفكرة غير قابلة للتطبيق

@larrybradley4777 10 месяцев назад

You guys did a great job!! It would be great if you could take an old car body, like a VW Bug, put an electric drive motor in it and the Liberty Motor and drive it around, that would be too cool. I reall wish those of us who do not have a machine shop could purchase the parts and put this together for our own family home use.

@franckverdu7140 10 месяцев назад

pour arriver en procedure de coulage de fonderie avec les composants annonces le process doit etre realise sous HAUTE PRESSION,car les temperatures de fusion sont toutes differentes ,le degazage et la restructuration moleculaire egalement.tout ca pour dire que cette "recette miracle"est une grosse arnaque car pour le commun des mortels ,c'est inaccessible donc inverifiable .quand on regarde attentivement l'aspect du rotor ,il est parsemé de bullage .le moteur utilise ne correspond pas du tout aux specificites annoncees (RPM dimensions d'arbre ,nombre de poles et sur le boitier ouvert en demonstration le positionnement des barettes de connexion donc apres avoir decortique toutes ces infos la realite est que C'EST UNE GROSSE ARNAQUE. le depot de brevet n'existe pas non plus (verifie aupres de L'OMPI ainsi que tous les organismes internationaux la pseudo conference de presse a ete piocheé sur une apk TV DONC ARRETTEZ DE PRENDRE LES GENS POUR DES IDIOTS .la diffusion de FAKES tout ca pour escroquer les personnes credules .bientot une petite enquette feras stopper cette aberation et il faudras rembourser tous ceux qui se sont abonne pour avoir LES PLANS SECRETS DE FABRICATION

@jl12781 10 месяцев назад

@@franckverdu7140 Pouvez-vous croire le nombre de personnes qui penser que c'est réel ? J'aimerais vendre à ces gens un paradis tropical dans la toundra arctique ! Je pense qu'ils ont dit que l'alliage était un mélange d'aluminium et d'argent. Puis il a poursuivi en disant qu'il n'y avait pas de courants de Foucault. C'est alors que j'ai commencé à éclater de rire. Comment diable 2 matériaux extrêmement conducteurs comme l'aluminium et l'argent peuvent-ils ne pas avoir de courants de Foucault !? Ferriday et Maxwell devraient ressusciter d'entre les morts et se tenir dans un coin de la pièce et rôtir ces idiots jusqu'à ce que leurs parents les renient pour leur stupidité ! Haha!

@jslevenson101 9 месяцев назад

Yes put a quiet version of that in an electric car so it generates its own electricity. Yes.

@MyLevelheaded 9 месяцев назад

go watch troy reeds driving a midsized automobile 12 years ago...

@user-gp8bx1km4s 9 месяцев назад

How do you expect anyone to believe any of this really works if we can't get full details and disclosure. And why is this motor not front page news .we should be driving cars with this type of motors.we should all be powering out lives n homes with this device. You guys would be multitrilionaires

@Rinat_Nur_41 11 месяцев назад

Вы конечно молодец что это заделали ну и другим дайте возможность сделать у себя дома это будет отлично 👍

@pauloedson810 10 месяцев назад

Parabéns pelo excelente trabalho e sucesso em novos projetos!!! 👏👏👏

@suleymancelik2990 10 месяцев назад

patent konusunda iyibi açıklama yaptın hem kendi adına hem ülken adına hemde dünya adına net ve pozitif açıklamalarda bulundun heerkes senin gibi olmaya bilir bunun için teşekkür ediyorum hem dünyanın hemde gelecek nesillerin senin gibi insanlara ihtiyacı var başarılar dilerim TÜRKİYE DEN sevgiler

@user-uc5su7ix7q 11 месяцев назад

15:05초 전원 분리 시 모터의 회전수는 소리로 비추어 감소 하는데 사용 전력은 전혀 변화가 없더군요. 또한 마지막 전원 스위치 차단 전에 모든 장치의 전원을 먼저 끄던 것을 사용 상태 그대로 두고 모터의 전원만 스위치 오프 가 아닌 콘센트 분리로 보여 주었다면 더욱 확실한 검증이 되었을 것인데 대단히 아쉽군요.

@yayaheryadi9480 10 месяцев назад

이거는 고지말

@joegiffen3815 Год назад

This appears to be the modern day equivalent of the alchemist's dream of turning base metal into gold and flies in the face of physics.

@jerryadams4449 Год назад

the great thing about science is that it's new understanding and discovery drives its growth,or should because the laws of science are never complete or fixed yet, big industry hides discovery for profit. establishment science peers barely recognise citizen science which is a disservice to mankind because it is where all invention outside the 'laws of science' is to be found,outside of the box..sadly much invention is literally murdered, I have direct experience of this..proof if you will..

@chaorrottai Год назад

not really, the second law of thermodynamic states the sum entropy of a closed system can NEVER decreases, it was falsified and proven to be incorrect when heat pumps shows COP > 1 for energy transfer which is reduction entropy. Thermodynamics has its uses but lord Kelvin was just a man and just because he was a lord doesnt make his theories laws.

@aywitb911 11 месяцев назад

I dont think it does. What they have done is minimized or eliminated the eddy currents. I saw a video years ago with some people doing something very similar. Get rid of the eddy currents then the magnets will pull it around with very little friction. He just made it way more efficient.

@heinzpg 11 месяцев назад

@@aywitb911 Do you really think the conservation law of energy is only valid if eddy currents are present? By minimizing eddy currents you can increase the efficiency of a working device but minimizing eddy currents doesn't make a non-working device work.

@aywitb911 11 месяцев назад

@@heinzpg Uh have you completely forgotten about the magnetism. That is whats used to spin the device. Its the field coming from the magnets, once they die out however long that is then it wont work anymore. Its not really over unity its just creating energy from the magnetic fields. They go away and so does the energy.

@marydesiderio80 Год назад

I am very happy to your invintion amigo because u are kind and very talented like Tesla to give more idea to the universe to give possible light at all around the world power with out any problem like to buy gasoline or any part of ur invintion almost zero maintenance brother you are good people I hope used this for small tiny house every day life used like anything like light,fan, electric iron or etc.bro bravos amigo iam very proud of it ur the One amigo!

@mstoudmann 5 месяцев назад

You guys are awesome, I'm proud of you, thank you!

@quickie3 Год назад

Hi congratulations you hit the home run!., You lifted the veil to a new light., Very grateful., Lest keep breaking barriers. Got a question an really hope you comment on it. , Do you think this could apply to a 3-phase motor to generate 3-Phase out on the similar set up thanks.

@MihaiMiculescu 10 месяцев назад

Assuming the alloy is Silver/Aluminum only, the proportions are roughly 56.24/43.76 volumetric and 83.31/16.69 weight ratio Ag/Al. The other unknown components might alter the proportions of these two. The price of roughly 6.5 kilos of silver is around 5.2 k USD. Investing that much in the rotor would be quite a leap of faith...

@oLoGoS 7 месяцев назад

yeah but if it works.... also IF this is pushing 20 KW of power it's substantially cheaper than a generator of the same strength

@melkvalentine3381 9 месяцев назад

Thanks a lot, God bless you for sharing this engenering, it can save a lot of People's Life.

@privacyfirst3849 10 месяцев назад

If you haven't already, you really should get in touch with Dr. Steven Greer.

@johnM-Jr Год назад

Ive seen many of your vids, on the earlier ones you said you would give last details to diy our own build. Im sure you understand everyone skepticism. If it is possible you should open source this so the technology is not lost when big money comes, buys, hides it from the people.. i know you have talked about that. Others have to be able to replicate.

@chaoskiller1758 Год назад

I agree it needs more community support.

@nickshow6876 Год назад

It’s easy asf my uncle can replicate it he’s also invented power beat batteries and many other devices that work your just an amature that knows nothing

@nickshow6876 Год назад

@@chaoskiller1758 you will end up dead that way

@janengel1985 Год назад

don't believe the promises

@theredeemeriam Год назад

The only one true way to do this, is to make a video from start to finish with everything you need. Release it to the world, and watch it change this world overnight!

@MrBademy Год назад

amazing guys, i cant believe you continue to update, this is the real deal, hope someday you decide to release all information for the public to replicate those devices and become independant from oil companies, this is the way! thank you

@ScottFogarty-iv9wt Год назад

This IS the information you have been waiting for.

@MrBademy Год назад

@@ScottFogarty-iv9wt i believe we need to know the exact specs of the rotor alloy to be able to do it as i understand it has strong relation to the distance and type of transformers being used

@ScottFogarty-iv9wt Год назад

@@MrBademy Hello Valentin, I totally agree with you. It would be wonderful if ALL of the work that they have done could just be handed over to us. It seems to me that is has been, with just a little more work left to be done. I read that someone was "hoping" to be able to have this technology "some day", in the "future". The action of hoping is waiting. We all have been hoping and waiting for something like this to come along and now it has. I think they have explained their position pretty well. I am so thankful that they have given us what they have. Now what are we going to do with it?

@MrBademy Год назад

@@ScottFogarty-iv9wt Yes i completely agree with you, but I have one small conflict in my head, they want to change the world they want to solve the energy crisis and government control, and else on the other hand this well-kept secret, and cannot be sold commercially and they will never do, because of oil companies will never release that secret to us, so the cycle is closed and nothing happens. So this cannot be sold ever, the only way is by replicating, why not release all to us in this case with the goal to change the tyranny and corruption of the government systems. And again they do release already enough details and am glad that they are doing this and really grateful. My question is now can anyone replicate it and have you succeeded so , that would be the proof

@theredeemeriam Год назад

@@MrBademy from what I understand it is a silver/aluminum mix. You can find alloy makers that make it with 5% and 10% silver mix. I would guess it is one of those two!

@jadh4582 10 месяцев назад

Sorprendente.. gracias por compartir sus conocimientos felicitaciones

@JUANTRUJILLOCASTRO1212 Год назад

Felicitaciones amigo

@doddymurdian1562 Год назад

Ini sangat bagus, terus lakukan uji coba untuk daya tahan dari partnya jika alatnya bekerja secara terus menerus tanpa henti, saya mau alat ini diproduksi masal, atau diciptakan lagi alat dengan skala yang lebih besar sehingga bisa dipakai sebagai pembangkit listrik yang akan berfungsi menerangi sebuah kota secara Gratis. Ini sangat bermanfaat sekali bagi manusia.

@shidiqhafidhulmuthohar4476 Год назад

Tapi bahaya Bro, mafia batu bara gimana nanti? pemerintah gimana? (khusus di Indo)

@skshahrukhshamim1449 9 месяцев назад

Am from India can u please help in knowing that the current generated by microwave coil is DC than how can you directly connect the same to AC motor fitted with capacitor and it's working please explain

@manikehmaanyan69 4 месяца назад

Satu coil harus berdaya 220 v.... Itu ada 4 kayaknya masuk akal jika 1 koil konsisten untuk pembangkitnya

@victorpeh5110 4 месяца назад

Но не для нафтовеків, урядів, міліардерів, і тих хто керує, світом, думаєте, це вже не винайдено, це вже давно винайдено, і приховано, і вже давно, світ направлено, в другу сторону, всі вчені перекуплені, навіть тесла, томі це і не виплело, а потом він продовжував, і вбили, всі вчиня в інстетутах, школах, все щоб вивчити дітей людей як їм потрібно, інакше, би людям непотрібні би буле вони, і льди би не булиб рабами. Люди ця брехня вже 1000 років. В світі багато чого можливо, просто нас вивчили так що ми нічого не бачимо, з самого малку.😢

@user-um5yn8oc6m 11 месяцев назад

Silver and aluminum alloys cannot eliminate eddy currents, they only remove heat a little.

@pereximepere8439 9 месяцев назад

truth, only laminated materials can do like silicon steel

@mitchellborbon7522 3 месяца назад

This will never see the light of day unless it is shared open source with the public. The patent process has a history of supressing over 5000 amazing technologies like this one. The current energy industry will stop at nothing to prevent this from coming out. Why would they ever be ok with it? The world needs this so badly right now. People are suffering. We shouldn't have to be slaving away to have electricity anymore. We shouldn't have to pay to live on a planet we were born on. Everyone deserves a home and access to power. This needs to be released before it is taken away for good. Secrets make us weak and vulnerable to crimes against humanity. All anyone cares about is money. Be a hero and let it out of the cage before you lose the chance. That being said...thank you for showing us what you have. Hopefully we can rediscover the silver aluminum alloy process, and recreate it. Sounds really specific and hard to figure out. Thanks for the tease. I can't decide if I'm mad at you or not. Add another to the "almost got it" list...

@user-fi3vz3ww7s Год назад

Thank you

@keithwatson8228 11 месяцев назад

I love seeing that people are already building this. I'm working on another invention with electromagnets to get the money to build one of these myself. Your design seems even simpler than mine. I do have questions though. Are all the magnets running together, or do they alternate? How do you keep them cool? How do you regulate the voltage sent to the magnets? Could I buy one of these for myself? I could actually skip my own build, and move to the next invention without having to go through the whole distribution process. This is a Tesla idea. It was meant to move humanity to the next level of freedom. That's why they killed him, and buried his ideas. I've had this idea in my head for quite some time now. I've told many people about it, and saw their eyes light up when they thought I just gave them a billion dollar idea. I tried to explain to them that they can not patent this idea. If you do, they'll come after you. They don't seem to get it. It's such a simple design, and once the technology is out there, anyone can build it. I love this.

@robertglancer347 11 месяцев назад

They didn't kill Tesla but stole his ideas, a family member of Trump one of the first, and JP Morgan

@paulpaintshop103 11 месяцев назад

Dream on baby

@arianlucatero7649 11 месяцев назад

Wtf am I on earth?

@robertzbyszek3238 10 месяцев назад

You must have knowledge

@robertzbyszek3238 10 месяцев назад

There's no power here

@julienespel3833 Год назад

Hello, I see that you are not answering a single question that I asked you. Where is the phase shift on the stator part where the coils are placed. There are not any! because to create a phase movement it is necessary to have a phase shift as for the part of the single-phase motor because otherwise the voltages cancel each other and the system cannot continue to turn. So how do you do? I am really waiting for a response from you. THANKS

@simplethings2410 10 месяцев назад

FYI. It only has 2 phases. Each with two windings (facing opposite to each other) connected in parallel..Separated by 180 degrees apart.

@user-ow6gb9yh6e 2 месяца назад

так там конденсатор стоит он и дает сдвиг .

@decler-gt7nu 11 месяцев назад

WOW !!!!!! Hot dam free power ,yep that's genna piss some peeps out there off ,incredible engineering, well done 👍👍👍

@tropangemoytv8875 11 месяцев назад

Wow very Useful this Project I like it, I will made it, many Video i watch in YT only this Vedio very Convinceng thank you for your effort and sharing your Project not for your content you Vlog but very useful to you Subcriber..God Bless You mor Power.

@spartakmece6441 Год назад

Thanks for your detailed video, you have found me a beautiful work to try and with great joy

@simplethings2410 10 месяцев назад

You can even use engineering plastic (w/c is lighter) as your rotor for the magnets instead of aluminum-silver alloy. Just make sure to couple your rotor to another flywheel in the same shaft that weighs 7.6 kgs minimum (same as his). It is much better to have a slightly larger diameter fly wheel to have better rotational energy (moment of inertia). The fly wheel can be made of mild steel to make it cheaper. You can use this formula: Moment of Inertia = 1/2 x (mass in kgs) x (radius in meters)² - "take note of the squared". Take note also that the moment of inertia of yours should not be lesser than his to maintain an effective rotational energy at 1500 RPM. At that weight of the fly wheel, the speed of the system will not change significantly even if you remove the power to the motor for a couple of seconds or even you put bigger loads.

@spartakmece6441 10 месяцев назад

@@simplethings2410 thx for your reply, but you've already tried and tested if it works or its just theory?

@rabi3babi366 Год назад

The first law of thermodynamics states that energy cannot be created or destroyed in an isolated system. It can only be transformed from one form to another or transferred between different parts of the system. In other words, the total amount of energy in a closed system remains constant.

@LenovoLenovo-ff3qr Год назад

Це теорія, а не закон.

@viljar1112 11 месяцев назад

Correct but who said this system is closed ... or we can't open it. There seems to be some weard ssht happening when large mass spins fast especially when coupled with electromagnet spectrum. We dont yet underestand how universe really works - keep an open mind, most groundbraking discoveris were treated with hate and ridicule but to day we are using those ridiculus things ☺

@GreenmeResearch 11 месяцев назад

Indeed for a closed system, for open systems in resonance, these laws don't apply

@comingviking 11 месяцев назад

@@viljar1112 "Weird shit happening" sounds conspicously like "then something magic occurs". What does "large mas spinning when coupled with electromagnetic spectrum" even MEAN? But of course, the test for any theory is not what it SOUNDS like, but if it actually works. Has this theory been put to the test outside of the genius's lab?

@1953Wes 11 месяцев назад

In any system large enough to avoid quantum dynamics, that's quite correct. Smooth flow, as this is, simply can't do what he's claiming. IOW, for this system to actually work, I'd expect to see frost forming on the outside of the engine as it pulled energy from the surrounding heat. Anyone who had a discovery that produced far more power than the input doesn't NEED to impress any physicists or such, they just need to hit up their friends for investment and start up production in a factory in China for the parts, and put them together in the USA. I GUARANTEE you the Dept of Defense doesn't give two flying whoops about theory, they'd buy ten thousand such generators in a heartbeat, IF you could demonstrate they worked with a real load, and could indeed run a day or two without stopping. The US Navy alone would want thousands of them, they'd LOVE to replace their subs nuclear reactors with a "never surface again" power supply. If it's easy enough to build at home, get China or India to cast up the frame and parts, and start selling them. There'll be plenty of customers - IF it is shown to work. Sigh. This nonsense has been around for my entire life, and history says it goes back much further, and somehow, despite the obvious demand, NOBODY has sold one that could pass an independent test yet. And don't gimme the "oil companies" thing, DoD doesn't care two whits for big oil, and would LOVE to cut off that billions of dollars of yearly expense and put it into developing new weapons.

@stephanusimam885 9 месяцев назад

God always blessing you... Good luck!!!

@tenthplanet3342 10 месяцев назад

Ty not only works it looks great too!!! 👍👍👍👍

@logancampbell6091 Год назад

it was allows a capability magnetic repulsion has always been free energy it just needed to be harnessed and worked into a motor. great job and all the very best.

@cesarpieres Год назад

Podrias dar mas detalles de la aleacion ya que las aleaciones de aluminio-plata pueden contener entre un 1% y un 50% de plata en peso. Las proporciones exactas dependen del uso previsto y de las características deseadas. El Invento me parece GENIAL es lo que quise hacer desde niño. Y lo lograron, felicitaciones ING. N. TESLA & COMPANY

@TeodorUk Год назад

Це і є основа. Це дуже тяжко. Немає шансів бро.

@TeodorUk Год назад

this is impossible. the composition will not say, it will not work to guess) just look))

@dejansavic9380 11 месяцев назад

@@TeodorUk Ako je Aluminijum težak 2,7 g/cm3 to značli da je ostalo Srebro dali samu pravu.

@garyhugh2494 11 месяцев назад

Iwould like to know the alloy mixture

@phillipequeiroz5760 11 месяцев назад

@@dejansavic9380 Him mension "mainly silver and aluminium, among other components". Nobody will can find the exact components with just this video. This channel is just a members farming

@joebourque3690 11 месяцев назад

Thanks!

@janengel1985 Год назад

nice workshop

@GAMERSW0RLD Год назад

Loving the follow up video! Many thanks!! My prototype works but need a closer material rotor/ flywheel 🙃

@MrBademy Год назад

would you mind sharing your experience and results please :)

@janengel1985 Год назад

yes, it can work well without the rotor

@MrBademy Год назад

@@janengel1985 do you have any practical demonstration or video, i`d like to give a try i suppose some parts can be expensive so i dont want to waste money , thought i am a true believer and i already have 2 electric motors playing with the capacitors and diode bridges, but this looks much simpler than what i am doing

@djk2427 Год назад

@@janengel1985 진짜로 성공했나요?

@janengel1985 Год назад

@@MrBademy you can't make electricity from electricity, try to make something mechanical and then connect coils, diodes and capacitors

@galaxystar527 Год назад

This is so beautiful and honest.....hands down....the best video on youtube.....thank you so much...love you guys

@heinzpg 11 месяцев назад

I don't agree. There are better fakes on RU-vid than this video.

@CHIK2 3 месяца назад

I wish I could help develop 3.5 and beyond. I would rather use my intellect for this project than work a regular job. Blueprints are welcome 🙏🏾 but your craftsmanship and design are second to none. Can I have one? This is more than liberty it’s Freedom. Be safe and Godspeed!

@thiagoalbarracin2183 11 месяцев назад

estaría bueno que en la parte del rotor y las bobinas hagan una cámara que este al vacío para reducir la fricción al MAXIMO de forma que tampoco se verá un poco frenado por el aire. igual puede ser que no cambie el resultado, pero capas aumente la eficiencia

@Geometriasaltar 10 месяцев назад

¿En serio crees que funciona esto?

@louievigil6088 11 месяцев назад

Back in the 70s and 80s on the Jonny Carson show if anyone out there can remember there was a man that is the creator of this great invention he used magnetic energy to power a light bulb this is truly astonishing

@MX6MAXIMUS 11 месяцев назад

That was Joseph Newman. It aired in Feb '86 same year I modified an input circuit for him to replace his waste of time looking for batteries.

@hemidart7 9 месяцев назад

@@MX6MAXIMUS You talk big for a nobody!🤨

@jugheadLAN 5 месяцев назад

You guys are the greatest! I’ve always knew this was possible , and you guys have done it ! It people like you guys that will change this world ! God bless and stay safe , don’t let Uncle Sam sweep this under the rug …

@chengchunli6333 Год назад

인생 이 발전이 이런것이지유 멋져

@alenpasnikov Год назад

I just hope that one day we all can have this.

@janengel1985 Год назад

nice home decoration

@oscarlopez6015 Год назад

La energía absoluta es un misterio pero tu trabajo es bastante creíble y razonable al vencer la ley de Lenz

@oscarlopez6015 Год назад

Por otro lado conseguír un equipo para la venta es posible

@danieroothman5555 Год назад

It's already in the pipeline to make it illegal for anyone to own any device that's not licensed.... licensed by the government😂

@romanhubal6680 11 месяцев назад

Не дочекаєтесь :(

@josepedrogonzalez6243 Год назад

Se agradece el haber compartido algo k las industrias de todos los países tratarán de apropiarse x lo tanto deben tener cuidado de sus personas X otro lado, es un modelo k permite ser autosuficiente de la energía de las grandes corporaciones k brindan este servicio y k este sistema los va a perjudicar Quienes se decidan a construir este Generador de Energía Libre, deberá mantenerlo en secreto y ayudar a quienes quieran este sistema xk muchas personas solo se dedican a mal informar sobre este tipo de inventos Gracias x apreciar el trabajo k realizan en este canal, estoy dispuesto a construirlo y ya reportare k paso con este proyecto, sin más, muchas gracias de nuevo

@gaetandefives1102 Год назад

Thank You, Very good job ! Gaetan

@4estisovest 10 месяцев назад

Спасибо 🙏❤️

@phicel6393 Год назад

Je me demandais comme pour les autres brevets, ou était la porte de sortie pour rendre ça crédible, et arrive le coup de l'alliage mystique, inventé par Luc Skywalker et valider par l'empereur lui même... Bravo, ce mystère va nous emmener vers une autre vidéo encore plus succulente 👍

@whoryou1131 Год назад

Luke skywalker power dance club box

@jl12781 11 месяцев назад

Je pense que c'est une machine à karaoké !! 🤣 C'est très déprimant de voir combien de personnes croient réellement à ces bêtises.

@jeanphil9682 10 месяцев назад

T'as un iphone et la télé tu crois qu'on a tout découvert? Les physiciens du moyen age qui postent pour faire le clown avec StarWars

@royeb63 Год назад

I'm not an engineer or electrician or anything like that, but it seems to me like the only function of the rotor is to hold the magnets. Couldn't it be made by a block of acrylic plastic or even some laminated hardwood or plywood? No eddy currents in those, and the RPM isn't fast enough to rip the rotor apart. I also agree with others, there's no way anyone will survive trying to make money by an invention like this (if it actually works). The oil companies will bury both you and your machine until the last drop of oil has been squeezed out of the Earth. Only chance of survival is to make ALL information about this freely available online so that it will be copied and spread.

@dixy1221 Год назад

I am thinking the same thing.

@alenpasnikov Год назад

Yes and the thing is oil is not scarce, they just want that we think that it is scarce. It is created about 200 km deep in the ground and is naturally created by the earth because of the heat and pressure.

@lolly_bread Год назад

@@alenpasnikov Oh I thought it was just crushed Dinosaur bones and plants! [sarcasm] Peeps, they've lied about nearly everything. We need to recalibrate our minds and seek truths only.

@janengel1985 Год назад

you made it much easier

@alenpasnikov Год назад

I wonder if the rotor mass affect it.

@stanleydsouza6723 2 месяца назад

Absolutely true, The world waits for this God's gifts that will sustain enough Free Energy for generations to come..

@stickbogart3657 Год назад

❤❤❤❤❤ Can you put an amp meter all the device while it is running the heaters to see what amperage can be drawn out of the generator ? ❤❤❤❤❤

@darong340 11 месяцев назад

If a rotor is made of non-electric material, can eddy current loss be reduced? (ex. synthetic resin, logs, etc.)

@rico67boss 9 месяцев назад

Revolutionary technique guy,congratulation,i guess i'm like other people who discover bewildered and full of hope seeing this,i finally ask myself the famous question,obviously,of the acquisition of such equipment,have you put up for sale and if so,at what price,thank you for your answer...!!!???

@sontran8152 Год назад

Tuyệt vời 🎉

@andreaspagnatosquit3844 Год назад

hello, as you don't sell this machine, are there any plans other than electrical to manufacture it? best regards

@paulmason9180 11 месяцев назад

I uses 4 x primary micowave transformer gal 900 e4 coils wired in only the ac ones, nimdium magnets, 12x 3 North and North pole up and down South and South pole left and right And a 1400 rpm induction motor with starter capacitor

@silentdeath9237 Год назад

Could it be made more efficient by adding four more positions for magnets on the rotor?

@pedrosura 11 месяцев назад

4 more positions for the rotor would cause a doubling of the frequency from 50 hz to 100 hz. So you have to get different trabsformers (they are 50 hz) The motor would also have to work with 100 hz. They probably do not have a transformer and electric motor that match that. 20 kW for that size and no fuel consumption is the most efficient machine ever made. I am not sure why you are even thinking of making it “more efficient”. Than what??

@simplethings2410 10 месяцев назад

@@pedrosura right

@user-hi2oo3so1s 3 месяца назад

Great innovation that helps mankind world wide. Superb invention!

@Happy.Viewer 5 месяцев назад

❤🎉Wonderful.!!!

@ngaderidila4188 Год назад

Trimakasih sobatku telah memberi pengetahuan pada semua orang mau tanya kabel imelnya ukuran berapa dan berapa putaran dan juga ukuranya karen berapa x berapa trimakasih

@djk2427 Год назад

로터의 합금비율이 계산해보면 대략 7.6kg 중 알미늄(비중 2896.2kg/m^3:1.39kg-48%)와 은(비중 10500kg/m^3: 5.86kg-52%)정도인데 세상에는 그런 비율의 합금은 없고 직접 녹여서 만드는 방법 밖에 없네요. 현재 은1kg에 120만원 정도니 로터를 제작 할려면 1000만원 이상 들어가겠네요..

@janengel1985 Год назад

and the secret is revealed

@theredeemeriam Год назад

@@janengel1985 that's around 10 000 dollars not that bad if this is real I would pay it. Well worth it if you can take this anywhere you go!

@theredeemeriam Год назад

Did you make this alloy? How was it discovered that this mix would yeild the results you needed?

@michaeldswson6253 Год назад

274.26 ounces if my math is correct. I hope I'm wrong though

@sangocklee5496 Год назад

열차단은 어떻게 해결했을까요?

@stanleydsouza6723 11 месяцев назад

Heartiest Thanksgiving to you all guys, Yes, We Will serve to save this beautiful Earth 🌎, through our innovations, Global warming is our big concern..May God Almighty 🙌 Bless you all..Love You guys..the feedback smart circuit diagram is the cream of our project..

@timscroggins2345 11 месяцев назад

Thank you god for all of us

@tahlularose9267 11 месяцев назад

Man, your good!!! And how about those magic wires!!! At 53 amps output that whole thing would be smoking and melting down even if those motor wires didn't melt like fuse links in just a few seconds...

@Raghu-zs6du Год назад

Dear Inventor, I have few questions for you. 1. How you are maintaining constant cycle of 50 hz frequency. 2. Also how you are maintaining constant voltage of 110 or 230 ? 3. You said in video that you have created an alloy material to get the weight of 7.5 kilograms for the rotor. Can it be any other material with same weight 4. If the rotor weight is different and 7.5, what will happen?

@eppicshotgun1281 Год назад

The secret is that it never worked in the first place lmfao.

@kidwave1 11 месяцев назад

@@eppicshotgun1281 If it was viable, ...and if there goal was to truly help the world, ...THERE WOULD NOT BE A "MEMBERS ONLY" COMPONENT! GTFOH!

@musicalmemory8864 11 месяцев назад

farce , never happened !

@simplethings2410 10 месяцев назад

Couple it to a heavy flywheel, run the system and afterwards, remove the power supply to the motor, you will see that the frequency and speed will remain the same for quite some time. The heavier the rotor to stop turning, the longer for it to be able to sustain the speed even you remove the power to the motor before it coasts down.

@skshahrukhshamim1449 9 месяцев назад

Actually the heavy rotor is just acting like gosolin engine flywheel which helps in making engine continue rotation to complete stocks cycle or continuing smooth cycle

@sandeeps4799 2 месяца назад

Great innovations for the future of the human human needs and living for the future energy ❤️👍

@EL_ALPHAS Год назад

Thank❤

@Pont1os_ 11 месяцев назад

what will be the cost of this generator? and when is it expected to be mass produced?

@princessgreen726 11 месяцев назад

Exactly my question. Let them produce the generator and we can buy it, those who can make it can go ahead on their own. Of this system is real them Mass produce it otherwise it is RU-vid geek device. Respond please. Thanks

@abdullahsaeed639 Год назад

Have you ever seen a 20000 watts generator or alternator? Just look at the magnet and coil size and guess , is it possible to get more than 1 kw power out of it?

@thebestcompaniondogforyou3367 11 месяцев назад

I would take a couple kw! Even if something like this sold for a couple thou US, it would be comparable to solar. Without the logistical and that nasty cloudy and night time thing.

@Ole_CornPop 11 месяцев назад

If we could somehow bend physics then it would be possible, until then we're stuck with solar panels and battery banks.

@thebestcompaniondogforyou3367 11 месяцев назад

@@Ole_CornPop I m good with that I have over 10k in solar

@Univarsearth 5 месяцев назад

You give a new name to this electronic system,, Tesla free electricity system,,for all human all companies 🤱🧠🔊💯come in India bro

@patrikbs 10 месяцев назад

Un capo lavoro namber one no coment !!!!!

@spartakmece6441 Год назад

Hi Liberty Engine I’m building one copy of your generator with three-phase asynchronous motor, can you please put the link where to find the N52 neolithic magnet, with your measurements i can’t find online Thanks in advance

@user-tj3bc4pf1o 10 месяцев назад

N52 є на Alliekspress

@spartakmece6441 10 месяцев назад

@@user-tj3bc4pf1o lol I need with that measurements

@darcevader8637 11 месяцев назад

Assuming that the alloy is made up of aluminum, silver, silicon, barium ferrite, and strontium ferrite, the likely proportions of the elements in the alloy are estimated to be: Aluminum: 47.5-50% Silver: 16.7-17.8% Silicon: 0.3-14% Barium ferrite: 32.9-38.4% Strontium ferrite: 0.9-1.5% there were other models that came up potentially including small percentages of Magnesium (for structural strength), and potentially even smaller amounts of Dysprosium, Terbium, and Praseodymium(to enhance magnetic properties). but not enough to warrant including for the basic breakdown. magnesium has properties that are emf shielding so i dont know if that would be good or bad in this context, but if you include magnesium to the list then the model im using allows for a proportion range of .5%-15% Note that this is not including the calculation required to subtract the weight of the neodymium magnets from the total weight before applying the proportion calculation. that would still need to be done to be more accurate. or you could just calculate the weight of the magnets based on the known weight of neodymium and the dimensions of the magnets and then just include the known % of the weight thats neodymium in the proportion calculation. both equations would tell you the % proportion of neodymium in the rotor.

@lappieslabuschagne2428 10 месяцев назад

Tnx. This info is very helpful. Much apprciated.👍👏

@TimurKolesnikov886 9 месяцев назад

did you get a prototype with a positive result?

@tonyromano8337 9 месяцев назад

Ur really smart lol, any updates ?

@escoson555 Месяц назад

Impressive. How did you come up with those numbers?

@zrbsz Год назад

Yapıyorsunuz bu sporu

@olochiyamata6306 Год назад

Very impressive. I want to build same one. Put on meters Volts Amps RPM Hz

@scoobasteve11 Год назад

This is my first time watching this and if this is legit and works I sincerely need to say thank you. We all need to work together and rid the evil aka govt from all nations. Electricity is everywhere constantly and there's no reason we all should have free energy.

@whoryou1131 Год назад

If it was real they would sell the plans but 3.99 to be in the dance club aint bad

@jorgezapata8645 10 месяцев назад

Muy bueno y revolucionario, mi duda es cuanto tiempo puede usarse sin que caliente el motor, por ejemplo si le damos uso domestico, o debería fabricarse uno de mayores proporciones? Felicitaciones y la verdad es que deberíamos, va, deberían los grandes inventores de estas genialidades, no pensar en la s grandes corporaciones que nos tienen prisioneros a su antojo, y dejar que estos inventos se divulguen por lo menos para generarles competencia y así reduzcan sus costos y me refiero a todo tipo de inventos y todo tipo de energía, y/o combustibles.

@JagunsoBJJ 5 месяцев назад

This is amazing sooner or later everyone will have one or more

@josefaustino3746 11 месяцев назад

Boa tarde Mestre, esse é o verdadeiro Santo Graal da energia no mundo inteiro. Se realmente for verdade...

@Tibulace 11 месяцев назад

É verdade, esse bilete!

@nicolauferreira5302 Год назад

Aonde podemos comprar essa maravilha????

@RRMS1123 Год назад

Me gustaría saberlo a mi también

@SilenceSupreme 11 месяцев назад

In dreamland.

@Dron_Snow Год назад

На уроці фізики ми робили з викладачем подібну схему, але там ще були кондинцатори. Це було 16 років тому )))) і воно дійсно працює.

@alessandropezzoli8601 Год назад

Fai sapere come si può comprare

@ismoulive 11 месяцев назад

Good job. I like that. When will you be producing for sale?

@draculascountry9872 11 месяцев назад

Magneții fac mișcarea ❤

@user-wm6cs4iv8o 11 месяцев назад

When The Frequency Meter Read 50Hz My Mouth Hit The Floor, If Anyone Knows The Secret Of 50hz, Then You Know How Powerful These Electromagnetic Motors Can Really Be For All Aspects Of Human Living To Stay In Perpetual Balance With Nature....

@michaelgregg436 Год назад

I am thinking that this might make a good electric car charger? Or put in an electric car and run as far as you want? Also nice for backup power in an emergency.

@user-pu8bt8fz1c 11 месяцев назад

動画を見て大変興味を持ちました実際に使ってみたくなりました購入出来たらうれしいです価格などわかりましたらお教えいただ掛ければ購入したいです。

@emilposa9805 Год назад

The best of the best

@TheStonedSpidR Год назад

I have a feeling im going to be seeing this channel in a debunk video

@FiglioBastardo 11 месяцев назад

100%

@julienespel3833 Год назад

Bonjour je vois que vous ne répondez pas à une seule question que je vous ai posé. Où est le déphasage sur la partie statorique où sont placés les bobines. Il n'y en a pas! car pour créé un mouvement de phase il faut avoir un déphasage comme pour la partie du moteur monophasé car sinon les tensions s'annulent entre elles et le système ne peut continuer de tourner. Donc comment faites vous ? J'attends réellement une réponse de vôtre part. Merci

@DUALGAINSYSTEM 9 месяцев назад

If this concept were truly functional, you could distribute the necessary components across various companies, avoiding any legal entanglements by merely selling these parts for various purposes. You could create a RU-vid video showcasing where individuals can purchase each required component to assemble it. However, it's evident that if a setup as simple as connecting a squirrel cage motor to a coaxial flux motor could generate substantial energy, it would have been achieved long ago.

@herrysp 10 месяцев назад

It Will Be Viral And Will Be DANGEROUS too.. ....I Hope Nothing HAve Anything Case Bad... Congratulation..

@First25121 Год назад

Спасибо ребятам 💛💙👍👍👍💪

@alexfast6620 Год назад

Это бред, я тебе такой же тест с тыквой вырабатывающей 100 квт сделаю. На этом видео минимум два способа как обмануть зрителей. Оба отпали бы при поднятии агрегата. Но нет он его не трогает

@janengel1985 Год назад

@@alexfast6620 we know it's a trick

@user-sw8lj4jn9c Год назад

@@alexfast6620 Тільки так! Це фейк для заробітку на ютубі.

@user-tw7we6ft5e Год назад

@@user-sw8lj4jn9c Самый простой способ проверить эту систему на работоспособность и доказать, ЧТО ЭТО не ФЕЙК : !!!! Убрать всё лишнее: металлическую раму ! Лишние провода и блоки ! НЕ КРАСИТЬ НИЧЕГО !!! 1. Прикрутить двигатель к прозрачной _!_ -образной из плексигласа стойке. 2. Навесить на вал барабан с магнитами. 3. На вертикальную пластину плексигласа, где закреплён мотор, вокруг барабана прикрепить катушки с сердечниками. 4. Рядом с катушками разместить по 2-ной розетке на каждую катушку и подключить соответственно. 5. Ничего нигде не соединяя, включить мотор в сеть 220v через Ватт-метр. 6. Далее -- нагружаем катушки разными электро-потребителями так-же через Ватт-метры -- проверяем ВЫХОДНУЮ МОЩНОСТЬ генератора ! 7. И на финише, отключив все нагрузки, проверяем САМО - ЗАПИТКУ ... ; когда система наберёт обороты, -- быстро переставляем вилку мотора из сети 220v в любую из розеток генератора. ( Может придётся пробовать разные варианты: выбирать розетку, менять полярность вилки, соединять по-парно параллельно противоположные катушки через розетки двойным проводом с вилками на концах ! Что-бы не было на системе лишних "соплей" !!! ) Потом, работающий агрегат, перенести на стеклянный стол .... Иииии..... , если мотор не остановится -- ЗНАЧИТ -- -- ПОБЕДА ...!!! ЗНАЧИТ -- НЕ ФЕЙК !?

@alexgazzola8592 Год назад

Thank you very much for sharing this patented and kept secret design, complete with measurements and construction specifications. Now it's up to us all to independently replicate it and set ourselves free alone, living with this possibility only among us citizens, we must all obtain this technology privately, so we have the possibility of being able to enjoy energy for free. Thanks again from the bottom of my heart, may the gods bless you. Now I will build it for myself.