Tesla Model Y DIY Xpel PPF - Full Frontal (Hood, Bumper, Fenders)

Подписаться 87 тыс.

Просмотров 70 тыс.

50% 1

One of the best things we did with our last Tesla Model Y was to install a DIY precut kit from 3M. This time we have teamed up with Drive Protected Shop to install another DIY kit, this time from Xpel.
Installing a PPF kit on a Tesla Model Y, or any Tesla for that matter, is not a super easy process. That said, you stand to save a boat load of money if you are willing to give it a try!
For best results, ensure your slip and slick solution are properly mixed, and make sure to keep the film wet until you are ready to lay the material down permanently. Start with the hood, then do the fenders, then finish up with the bumper. The bumper is the hardest panel to do and having done the hood and fenders will get you in the grove before getting to the bumper.
All Tesla kits, Model S, Model X, Model 3 and Model Y will save 20% by using code BTG on the site.
driveprotected...
Code "BTG" to save 20%
Join this channel to get access to perks:
/ @beardedteslaguy
Follow us:
Twitter @BeardedTesla
/ beardedtesla
Instagram BeardedTesla
/ beardedtesla
Accessories
Floor Mats, 3DMAXpider use code BTGMAX for $10 off - www.formytesla...
DIY Ceramic Coat use code BTGCC for $10 off - www.formytesla...
Mattress use code BTG for $10 off - www.formytesla...
Hansshow Power Frunk use code BTG for 15% off - www.hautopart....
Matte Screen Protector - amzn.to/3o7IaLN
Clear Screen Protector - amzn.to/35bhD7E
Center Console Cover - amzn.to/31oIYlO
iPad Holder - amzn.to/2YLBbgZ
Mobile Connector Organizer - amzn.to/3iiUkOP
Car Seat Covers - amzn.to/2Vsc9kX
Phone and Glasses Holder - amzn.to/2IQcnzb
iPhone Charging Cable - amzn.to/3svnEG5
Roof Sunshade - amzn.to/3geCUVi
Filming Equipment
Canon M50 - amzn.to/3lqNfww
Sigma 16mm Lense - amzn.to/2SDHE9E
128 GB Pro SD Card - amzn.to/3nv242V
GoPro Hero 8 - amzn.to/38mwltO
GoPro Tripod - amzn.to/3dPO7GK
GoPro Media Mod - amzn.to/2YJlbMl
GoPro Suction Mount - amzn.to/3eI67UO
Microphone - amzn.to/2ZmZlgN
As an Amazon Associate I earn from qualifying purchases
If you are ready to order your new Tesla, don't miss out on your free 1,000 miles Supercharging by using my referral code - www.tesla.com/...

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 338

@petegalindez9961 3 года назад

WOW! You are my freakin hero! I’m still suffering PTSD from trying to do my Model Y almost a year ago…

@BeardedTeslaGuy 3 года назад

Hahahaha. I totally get it. Lol

@ericleszkowicz898 3 года назад

Just finished calling and ordering. What a great guy and super fast service. He said this is the video to follow if you are installing PPF.

@BeardedTeslaGuy 3 года назад

He really is a great guy. Really like supporting business like his

@xxCanUDigIt88xx 3 года назад

Thank you for all your videos. You have helped me decide on ordering a new Model Y.

@BeardedTeslaGuy 3 года назад

So awesome, congrats!

@jmanEOS17 3 года назад

I just did the doors on my Model 3 last week and I can just smell the baby soap and rubbing alcohol in the air as I watch this video! Thanks for sharing.

@BeardedTeslaGuy 3 года назад

Hahahaha so true!

@DriveProtected 3 года назад

🙏🙏🙏 Thank you for the support!!

@BeardedTeslaGuy 3 года назад

Thank you too!

@rodpritchett 3 года назад

Thank you for posting this! You can tell that you’ve gained experience since tackling this on your white MY. I have an MSM MYLR that’s a few weeks away from being delivered and this will be one of the first things that I do to it.

@BeardedTeslaGuy 3 года назад

Smart! I got it on before we started driving it daily. Glad I waited.

@aaronchambers2866 Год назад

Good stuff , about to do my new 23’ y. Thinking about doing my own cuts too

@BeardedTeslaGuy Год назад

Yea, if you have the patients, it's well worth it! Thousands of dollars in savings.

@AKTechIT 3 года назад

Kudos to you for having the patience

@BeardedTeslaGuy 3 года назад

Cheers!

@AKTechIT 3 года назад

@@BeardedTeslaGuy forgot to ask, did you clay the panels prior to the xpel?

@dannylemmon7123 3 года назад

I just did this today. Your videos were very helpful. I would definitely recommend a friend for the hood and front bumper. It didn’t turn out perfect, but thanks to your two videos I was able to avoid some of the issues you had on your first MY. Thanks BTG

@BeardedTeslaGuy 3 года назад

So awesome to hear! Congrats and take price every time you look at the car!!

@rono33 2 года назад

can you please share how many hours it takes to do this? thanks :)

@dannylemmon7123 2 года назад

@@rono33 I would plan on about 6

@MarkStatkus 3 года назад

I can totally agree after picking mine up I am going to want to protect the front and rear rockers.

@BeardedTeslaGuy 3 года назад

Yep!

@rkgsd Год назад

The beard has good taste in beats!

@BeardedTeslaGuy Год назад

😎

@timshephard 3 года назад

Great job! Your last video encouraged me to do my Y. I did upgrade to the full hood and did the mirrors and headlights also. Thanks!

@BeardedTeslaGuy 3 года назад

Glad I could help! Nice work!

@cmarkyt 3 года назад

Thank you very much. I am going to do it on the first week of the delivery. I hope xrel ships to Canada.

@BeardedTeslaGuy 3 года назад

It does! Drive Protected Shop is in Canada!

@b-gill9224 3 года назад

This video gave me the confidence to tackle this project on my own. My MYLR will be here in the next couple weeks and just ordered the full frontal package. Thanks bearded dude.

@BeardedTeslaGuy 3 года назад

Best of luck! You can do it!

@kylehill4437 Год назад

How did it go?

@b-gill9224 Год назад

@@kylehill4437 OK. Not great but good enough to provide some protection for a few years LOL

@kylehill4437 Год назад

@@b-gill9224 Thanks for the update. Something is definitely better than nothing. My Model 3 without PPF is painful and gross to remove bug splatter lol

@sdexcalibur Год назад

I feel this is something I can tackle. It looks very forgiving,

@BeardedTeslaGuy Год назад

You can, just have to have patients.

@louieg4815 Год назад

@@BeardedTeslaGuy so just pick up a couple from the hospital?

@dgmorr 3 года назад

Thanks for the discount and DIY

@BeardedTeslaGuy 3 года назад

You bet!

@royceumstattd7056 3 года назад

Thank you for posting this. I am about to take delivery on a MY long range same color as yours. I will probably try this myself- I think I can… I think I can…

@BeardedTeslaGuy 3 года назад

You can! Just watch a bazillion PPF install videos. The hardest part is the opening at the bottom of the car. I will be doing the model 3 here soon and will try to get more footage of that part of the install

@OrganicStuff1 3 года назад

Dude your so good at this DIY stuff! Wish I had a big enough garage to do this also. Appreciate all the vids hopefully it will help people out since the front end is rock chip city 😂

@BeardedTeslaGuy 3 года назад

Rock chip city indeed! That is such a large painted surface exposed to so dang much!

@stannous2T 3 года назад

Thanks so much for doing this video. I want to do this for a long time. This is a big big help. Thanks again.

@BeardedTeslaGuy 3 года назад

Cheers!

@jcj68 3 года назад

I did that in two of my cars and it was tough! Those curves are so tricky, I had to use the knife just as you did. Not a professional job but it did protect the cars which was the ultimate goal.

@BeardedTeslaGuy 3 года назад

Exactly

@LifeasArt_Tech 3 года назад

I can only afford one Tesla right now, and I’m 100% sure I’d angrily attack it with a baseball bat if a whole section got stuck to itself… so I’ll pay someone else who I can nit-pick! Kudos for the patience and perseverance!

@BeardedTeslaGuy 3 года назад

Haha, nothing wrong with that!

@TeslaOG 3 года назад

Great job on this. I know they are a ton of work.

@BeardedTeslaGuy 3 года назад

Cheers

@tonireed4308 2 года назад

Outstanding job BTG :)

@BeardedTeslaGuy 2 года назад

Cheers

@realgrapedrop 3 года назад

FYI I live in Tampa FL and I brought my March 2021 Model Y Performance to Autopaintguard who charged me $1500 for a full front Expel PPF with a 10 year warranty. They also did a full body ceramic and tint on all windows except for the roof, for extra of course. But the PPF full front including number and mirrors were $1500 and they installed it perfectly! So I’m not really sure $1,795 is a great deal where you have to install it yourself. I didn’t get. My special deal either, that’s their standard quote for that car, and they have been around for over 20 years and do exotic cars every day. I know because every time I went there I saw Lambos, Ferraris, Corvettes, Tesla’s, etc.

@BeardedTeslaGuy 3 года назад

Sounds like they got you set up nicely. Congrats

@talhashahid5668 3 года назад

It’s $753

@fredericko9402 3 года назад

Wow... you are now a pro now ... doing the 2nd time. Nice save on the left side!

@BeardedTeslaGuy 3 года назад

Thanks 👍

@fredericko9402 3 года назад

@@BeardedTeslaGuy questions. seems like there is no holes for the sensors... is this not going to be an issue if the sensors need to be replace or fixed ?

@fredericko9402 3 года назад

ok, saw it... you got to use knife to cut it... that looks dangerous ;-)

@davidterrero 3 года назад

Thank you for this video! and the discount code!

@BeardedTeslaGuy 3 года назад

You are so welcome!

@iamnid 3 года назад

I did the paint protection film on the rear doors of my Model Y. It was such a PITA that I would never attempt this. I gladly paid to have someone do the first half. Great job though!

@BeardedTeslaGuy 3 года назад

Yea, it takes some finesse lol

@aaronodongkara1017 3 года назад

Great job! Looks wonderful! I see you have some skills!

@BeardedTeslaGuy 3 года назад

Thank you! Cheers!

@dta1329 3 года назад

You actually made it look really diy possible. I’m super encouraged. How long does it last and is there a warranty?

@BeardedTeslaGuy 3 года назад

Last for longer than you are going to own the car! There is a warranty on all Xpel product too

@brandonkwong07 2 года назад

I am about to order the full front and attempt this myself. I have scheduled delivery 6/11 for my Model Y, and was originally planning to take it to a shop. Local shops are 2200 plus tax so hopefully can save some money or else about a 700 dollar screw up.

@BeardedTeslaGuy 2 года назад

Just take your time, keep the material wet until you squeegee and be happy with an amateur install.

@brandonkwong07 2 года назад

@@BeardedTeslaGuy thank you! You have convinced me that I can do it. Thank you for also helping me get a discount off my order.

@latitudeash 3 года назад

Looks like that went down really well this time. I remember you struggled a lot last time. I bet if you had to do a 3rd it will go even better. It's all about practice. Looks hard but with the spray guns easy

@BeardedTeslaGuy 3 года назад

Yea, indeed. Way smoother this time. Plus the lack of anxiety from not knowing what I was doing.

@STATUS-ho8tk 3 года назад

Great job on that install.👍

@BeardedTeslaGuy 3 года назад

Cheers

@TeslaOG 3 года назад

I’ve got a guy doing my entire front end for just under $1000. I had to book it way in advance, but xpel full frontal on a model y done for me for a grand is the best deal I’ve found anywhere. Already had the front door windows and the front windshield ceramic tinted. I’m on the fence about the wheels I’m going to buy but leaning towards a set of 20” BC Forged in Matte Black. 21’s are just to harsh on the ride quality.

@BeardedTeslaGuy 3 года назад

Nicely done

@talhashahid5668 3 года назад

That’s not a bad price. Where are you located?

@Weathergeekdan 2 года назад

I want to do a full STEK Matte finish wrap but have a hard time spending $6500 to protect the whole car. All this time waiting for me delivery has me stacking up the things I want to do.

@BeardedTeslaGuy 2 года назад

Yea, this is a way to do it for literally thousands less!

@Weathergeekdan 2 года назад

@@BeardedTeslaGuy I’m not sure I can do a full wrap in matte myself. If it goes wrong I messed it all up and will still pay someone to do it. For 6500 i could have the whole car painted after Several years if it took a beating. Having never done tint or film work I’m not sure I would tackle this. Does the kit you did wrap under the edges of panels or stop at the edge? Any of it peeling back yet

@RajanKannan11 3 года назад

Great Video. You have motivated me to try this myself. I really wanted to save money by doing it myself. Thank you so much. BTW, What happened to your White MY ?

@BeardedTeslaGuy 3 года назад

It sold so dang fast lol

@RajanKannan11 3 года назад

@@BeardedTeslaGuy wow . Awesome ! Good to know . Congrats!

@ajlanger5 3 года назад

Agree about the encouraging part. I get my M3LR in November hopefully and I was ready to spend 1800 for a pro to install a full frontal package. Now I’m motivated to DIY for like ~$700-800. I’m completely ok if it looks “$1000 off good” LOL.

@Player_Mick 3 года назад

watching this reminds me when i'm at the lake and see people on those rented pedal boats,, looks easy, looks fun, but not when i'm doing it.

@BeardedTeslaGuy 3 года назад

hahahahahahahahaha

@kietngo3654 3 года назад

Awesome job!!! I'm too much of a wussy to attempt this on my paint failing model 3 lol.

@BeardedTeslaGuy 3 года назад

It’s not the easiest thing to do

@nikunj2707 Год назад

Hi has BTG stopped selling XPEL Kits ? I see they have a different brand on their website now. Any idea where we can get the same XPEL kits ?

@BeardedTeslaGuy Год назад

XPEL installers got together and put a stop to DIY kits being sold so had to switch brands

@jsasu.3 3 года назад

When u pulled out that razor knife 😬😲

@BeardedTeslaGuy 3 года назад

Hahaha. Just be VERY careful!

@georgeking5113 2 месяца назад

What happens if I add too little J&J in my slip?

@andrewhill1499 3 года назад

Looks like your review worked! So much traffic their website has TECHNICAL DIFFICULTIES splashed across the main page with a note to call for a quote. Pay attention retailers and get the BTG bump!

@BeardedTeslaGuy 3 года назад

haha, we literally crashed the website in an hour after video posted...

@StevenSato 3 года назад

I would only buy if the price can be verified as the same as before the video

@mcunha81 3 года назад

Nice job, I dont know how u did that front piece by your self, I couldn't figure it out, for now I got the half hood on, half fenders ,mirrors and center part of front piece..

@BeardedTeslaGuy 3 года назад

Patience. And a lot of it! Not the simplest piece to do that’s for sure

@michaeldobbins1258 3 года назад

Thank you for choosing XPEL! I just sent you an email - Michael from XPEL

@BeardedTeslaGuy 3 года назад

Got it thanks!

@jamesbuchanan3439 3 года назад

It looks and sounds like a complete exercise in frustration trying to do this more or less perfectly, yet you still say that you are thrilled with the results. Is that because you REALLY like the idea of having protection against rock chips, or because it looks that good in spite of any remaining tiny imperfections, or all of the above?

@BeardedTeslaGuy 3 года назад

Both! I think it turned out REALLY good, and of course the peace of mind with all the highway driving we do.

@CorbinAviation 3 года назад

This is encouraging me to try it! That site won't work as far as searching for the xpel template to buy. Hopefully just a temporary problem.

@BeardedTeslaGuy 3 года назад

It is a temporary issue. When the video went live, we crashed the site in an hour.

@CorbinAviation 3 года назад

@@BeardedTeslaGuy Cool…I’ll check back periodically. Thx!

@bannoriktech4967 2 года назад

Hello BTG…. I’m sure by now you’ve figured out that I’m your #1 fun if you’re running those stats. Thanks for all the hard work…….. important question: I bought the full body PPF from drive protected per your recommendation. I started the install last night. Completed the hood and fenders. However I may have used too much dawn soap in my slip. I see a slight haze or possibly minor difference in the color of the hood vs the bumper. Can the wrap be removed and reinstalled ? My car colors are the same as yours cos it’s the best combo. Also wish we could communicate via calls if possible . Thanks 🙏🏽

@BeardedTeslaGuy 2 года назад

Hmm, that’s doesn’t sound right but I suppose it’s possible. You can remove the film and the sooner the better if that’s what you are planning to do. I’d call Eric at drive protected shop first and get his opinion. It may be something simple like dry time.

@sdsuresearch128 2 года назад

I installed PPF from a different vendor and encountered a similar issue during my hood install. Give it time- at least for me, the PPF settled and the hazy spots disappeared after about 12 hours. About to order this kit for my wife’s car. Thanks for the video and the discount code!

@kepop98 2 года назад

Im terrified of doing it myself lordt!

@BeardedTeslaGuy 2 года назад

Hahaha

@quintkuhl683 2 года назад

Rear Panel Protection for Dark colors!!!! MY Blue was chipped first 500 Mi. of freeway driving!

@BeardedTeslaGuy 2 года назад

It’s crazy. So worth protecting it

@nevillejames2200 3 года назад

Great job

@BeardedTeslaGuy 3 года назад

Cheers

@rzu7120 3 года назад

I’ll be covering my car with Polish PPF. That’s a roll of heavy duty Saran Wrap.

@BeardedTeslaGuy 3 года назад

Hahaha love it

@sephystar 2 года назад

Awesome video! I noticed that their kits don’t include the headlights. Do you think it’s not needed? Thanks for all your great videos!

@BeardedTeslaGuy 2 года назад

I put them on my first Y, but not this one. Up to you, but I was worried that my lights were distorting and blinding people with the film

@sephystar 2 года назад

@@BeardedTeslaGuy interesting point!

@moebarekati6243 2 года назад

Should we replace these after a couple of years? I heard something like that

@BeardedTeslaGuy 2 года назад

No! It’s rated for 10+ years of use

@mahm7180 2 года назад

Did they change the website? when I open it it looks different and is only about Tesla :/

@BeardedTeslaGuy 2 года назад

Yep! New look on the website!

@BenBrand 2 года назад

They also changed the product they are selling, see my other comment asking BTG

@okhera1 3 года назад

Very Nice!

@BeardedTeslaGuy 3 года назад

Cheers

@ianbladuell2694 3 года назад

I had my previous 2019 model three standard range Plus expel applied in the front fenders, headlights,Hood and front bumper for $900 plus tax. Will be contacting him to do my 2021 model three long range that is on order once I get it

@BeardedTeslaGuy 3 года назад

Nicely done

@talhashahid5668 3 года назад

That’s not a bad price for a full frontal install. Where are you located ?

@ianbladuell2694 3 года назад

@@talhashahid5668 austin texas

@scottworcester2693 3 года назад

Great vid Justin! you got your winters still on? How did you like those Vteds? Am itching for anew set of Blizzaks on myMY

@BeardedTeslaGuy 3 года назад

They are actually all season tires and they do great. Love these tires

@TheCarGuyWV 3 года назад

Great job bud, website is still down. 😞

@BeardedTeslaGuy 3 года назад

Yea, we broke it with volume lol. I know they are working on it

@SaiSimhaReddyDevireddy 3 года назад

I have been watching your videos for a while and like others mentioned, you are very informative. I bought many accessories you suggested and thanks to you, I did get the xpel kit with the 20% discount. I have a question for you. Why did you choose Xpel over your 3M Pro? In terms of cost i felt 3M is more competitive. Did you feel Xpel was worth it? I am going to install Xpel anyway as I bought it but couldn’t stop asking. :)

@BeardedTeslaGuy 3 года назад

So I wanted to try it this time to see the difference. The Xpel was a lot more forgiving and easier to work with than the 3M. So with that, I got Xpel for the Model 3 as wel

@Stephielifts Год назад

I want to order the front bumper set. It asks me if I want, a single piece or multi-pieve bumper set. Which do you recommend?

@BeardedTeslaGuy Год назад

I would highly recommend considering the multi piece front bumper. Install, after doing it like 4 times, takes me 4.5 hours with the 1 piece. It took me 1.5 hrs with the multi piece. Way easier.

@Stephielifts Год назад

@@BeardedTeslaGuy Appreciate it. That’s what I’ll do. And use your code!

@Emilestafanous 2 года назад

how do you protect the windshied?

@BeardedTeslaGuy 2 года назад

there is a product out there kind of like PPF. I don't know enough about it though.

@robertswanson6774 Год назад

Hi love your videos. Can you tell us you mixture for the spays u used

@MrSchmo 3 года назад

Im getting the Xpel front bumper for my upcoming Model 3. What none of these PPF videos ever show or talks about is the solution used. What is it? Does it come with the kit along with the scraper? This is useful information that always gets left out. Driveprotected doesnt even mention it on their website what the solution is or should be or if it comes with the kit or not.

@BeardedTeslaGuy 3 года назад

Sorry, I did show the mixture and the process in our first PPF video. It’s a full bottle of distilled water with a squeeze of Johnson baby shampoo for the slick solution. The tack is 10% alcohol to 90% distilled water

@geek2330 3 года назад

You click on the url and go to search for the xpel kit but no options in the drop downs.....

@BeardedTeslaGuy 3 года назад

We crashed the site in like an hour yesterday. You can call to order or wait for Monday. So sorry for the inconvenience

@fredericko9402 3 года назад

@@BeardedTeslaGuy still not working...

@cheftommy 2 года назад

i watched you do your white car now this car. what you think is the difference as far as stretching goes? the Ebay one i had to force stretch . fitment was no good

@BeardedTeslaGuy 2 года назад

The 3M one required way more stretching than this, it was also much less forgiving (overstretching)

@Pete35vail 3 года назад

Would’ve been nice if he would wanna narrative with the install. You could’ve told us it was the issues were in the problem for you running into. I will see you next time do something with the narrative and some scenes with the music. Just a suggestion.

@BeardedTeslaGuy 3 года назад

I’ll see if I can do that next time. All 4 door PPF just arrived today so I’ll be installing those next.

@belavet Год назад

@@BeardedTeslaGuydid you have a video of the rest of the ppf? I'm considering doing this myself; shops are wanting $7k in my area for xpel stealth and $6500 clear 😩

@ritacristobal1285 Год назад

What is the ratio for the alcohol and water; baby shampoo and water???

@BeardedTeslaGuy Год назад

9:1 Water:Alcohol Full spray bottle of water with a few drops of Johnsons Baby Shampoo *Distilled water only

@rono33 2 года назад

Can you please share how many hours it takes to do this? thanks !!

@BeardedTeslaGuy 2 года назад

Full frontal first time was about 6.5 hrs. This last time was about 3

@ronaldcabrera1603 2 года назад

just a quick question, the alcohol solution sprayed on top right?

@BeardedTeslaGuy 2 года назад

Alcohol is for when you are ready to stick the film down. You spray it under the film, not on top

@curtisneeld2413 2 года назад

Thanks for all the help with prepping for delivery of my Tesla BTG! One question here, does the Xpel you mention in this video come from the drive protected site or do they use another type of PPF? If so is it similar to work with/protection/quality?

@BeardedTeslaGuy 2 года назад

Xpel has put a stop to diy kits so drive protected has brought a new film with the same characteristics as Xpel. It’s still 8 mill thick, 10 year warranty. After installing both, this installed as easy as Xpel from my experience.

@guguemg 2 года назад

Do you recommend to wash the car first before installing the PPF? Also, I only see you used one solution (soap + water) I guess. Not sure where you used the alcohol. I might miss it. Also, would you share the ratio of the amount of soap and water? Thank you in advance

@BeardedTeslaGuy 2 года назад

Yes of course. Use dawn dish soap to clean with

@john25889 3 года назад

Great job, awesome video! How long will the discount code be available? Might be awhile before we can get it.

@BeardedTeslaGuy 3 года назад

No expiration at the moment!

@hwaiskywind5624 2 года назад

how much alcohol you add to the tah mixture? What is the ratio ? I think I did not put enough alcohol so it was not work too well. thanks.

@BeardedTeslaGuy 2 года назад

Alcohol mixture is 1 part alcohol, 10 parts distilled water.

@Super1genius40 3 года назад

Usually this is done with a heat gun. May I ask why didn’t you use that technique?

@DriveProtected 3 года назад

paint protection film is a wet application. Vinyl installation is with a heat gun and squeegee but provides zero stone chip or scratch protection

@schwinn04 3 года назад

Usually? are you thinking of vinyl wraps?

@BeardedTeslaGuy 3 года назад

You dont want to use a heat gun on PPF unless you absolutely must.

@TOandMore 2 года назад

After the ppf film attaching, can you pressure wash the car? How do you wash the car afterwards? Thanks

@BeardedTeslaGuy 2 года назад

yes of course.

@vin374 3 года назад

My grandmother used to put plastic on her couch and chairs. Same concept?

@BeardedTeslaGuy 3 года назад

lol, not exactly

@ericleszkowicz898 3 года назад

Front bumper looked like the tough one ?

@BeardedTeslaGuy 3 года назад

The hardest part no doubt!

@rickeybarnes6471 3 года назад

Great install, I went on the site , the cost was about 950 dollars?

@BeardedTeslaGuy 3 года назад

It’s Canadian, so do the conversion to USD

@ace00 3 года назад

Do you have to cut each parking sensor or is it pre cut? Sorry I couldn’t tell. Or do you not need to cut it and just apply the PPF over it?

@BeardedTeslaGuy 3 года назад

This time I opted for the parking sensors to not be precut

@pokemonmaster2609 2 года назад

Question how many xacto marks does this wrap cause? Been thru many window tints and seen many xacto cuts around the window.

@KhanhLe-zf3xr 3 года назад

Any reason why you had to cut out the film around the parking sensors?

@BeardedTeslaGuy 3 года назад

I ordered it without the pre cut holes so I could lay the film more naturally. When the holes are pre cut it can make it just a little less forgiving because those holes have to line up

@KhanhLe-zf3xr 3 года назад

@@BeardedTeslaGuy Do you thinking leaving the PPF on the parking sensors will impact its function? Wondering if I can just leave the PPF on over the sensors...

@zippyzipparo 2 года назад

It looks like they are using defense+ film instead now? Also, doesn't look like you can buy individual pieces anymore? Just a partial front, Full front, full front plus, and full wrap?

@BeardedTeslaGuy 2 года назад

It’s because the Xpel dealers were not happy about these pre cut films being sold so people could do it themselves.

@zippyzipparo 2 года назад

@@BeardedTeslaGuy any reviews on this new film then? And any way to get like full front and rear bumper only?

@BeardedTeslaGuy 2 года назад

I have not seen the film yet in person, but I know it meets the same spec as the Xpel film, and also has a 10 year warranty. I will be using in on the Model 3.

@paulyoon168 2 года назад

@@BeardedTeslaGuy Have you heard of any one’s experience with the Defense+? Was hoping for the cork film since it seemed to be a lot more forgiving.

@simplyc1175 3 года назад

Great job! Thanks for this video and tips! My husband and I are afraid of messing it up. How often do you recommend changing out the PPF and does it come off easily if we decide to remove it over time or does it affect the paint?

@BeardedTeslaGuy 3 года назад

You don’t remove it. It’s a semi permanent layer. Removing it is very tricky once dry

@thedreamers2521 2 года назад

Use a steamer to easy remove the ppf take to every corner of your car the paint so sensitive is possible to damage the paint.

@bannettfernandes2804 2 года назад

Thank you BTG! I’m almost sold that I can pull this off myself. Just a quick question or a couple if I may. What is the exact proportion of the slip solution? And if for any reason I want to remove the wrap in the future, will it effect the paint?

@BeardedTeslaGuy 2 года назад

Slip solution is 32 oz distilled water with a squirt of Johnson baby shampoo

@bannettfernandes2804 2 года назад

@@BeardedTeslaGuy thank you BTG. Long time subscriber. Keep up the good work 👍

@BzReef 2 года назад

Did the film come with the both solutions and the squeegee needed for the install? or did you have to buy those separate? I dont see the solutions listed on the drive protected site.

@BeardedTeslaGuy 2 года назад

no it does not. In several of the vids, I explained the solution makeup. For Slip, fill a 32 oz bottle with distilled water, then a squirt of baby Johnson shampoo. For tack, it is 1 part alcohol to 9 parts distilled water.

@bemdur 2 года назад

If doing the front end, what should be the first ‘’learning’’ most forgiving) panel? When do you use the ‘tax’ spray and is it necessary to cover 100% of the area between the film and the paint?

@BeardedTeslaGuy 2 года назад

For the front end, start with the hood or the fenders. Do the bumper last. You will use the tack solution to make the film stick, so only once you have it in place and want it to stick. Usually only need to use it in the corners, or areas that are not staying down on their own.

@bemdur 2 года назад

@@BeardedTeslaGuy thx for the reply. My son, Brad, was the announced PPF winner the other day and he gifted it to me since he is already done. Then he got bumped on the recount. So I am on the fence of just doing the spray for the $140 or doing the front. I can't seem to find the order link for the pro total front. BTW I see cheaper priced on EBAY from the same company. I assume it is not the pro and is a less costly material, correct? Any chance of a better discount since we were the announced then rescinded winners?

@bemdur 2 года назад

I see P8204C-U USD $‎854.95 plus $469 for the bumper $1324 x .80% $1060. I thought I saw it lower a few days ago.

@slee4110 3 года назад

Question: did you do ceramic coat on top of the PPF? Can you recommend mud flaps too? Thanks so much. Your video was very inspiring

@BeardedTeslaGuy 3 года назад

Ceramic is coming. Mud flaps were in the red calipers video earlier this week. Really like them

@RayNLA 3 года назад

Yes! Two coats of Gtechniq Halo on top of PPF. Pro Tip…Put a light coat of wax on the paint before doing PPF, wipe the edges with alcohol. It helps with lift lines when repositioning the film. And easier removal in the future. For air bubbles use a syringe. And never use 3M film!!!

@slee4110 3 года назад

@@RayNLA Thanks for the tip!

@slee4110 3 года назад

@@BeardedTeslaGuy Thanks! Didn’t watch that video at first since not looking to do brake calipers but I checked it out now for the mudflaps

@RayNLA 3 года назад

@@slee4110 You’re very welcome 😉

@andreym325 3 года назад

Website doesn’t work. Can’t select anything

@BeardedTeslaGuy 3 года назад

We crashed the site with demand. You can contact them directly or try again on Monday

@PIPERBOYWILLIAMS Год назад

Ashame I have to get this on a 60k plus car

@BeardedTeslaGuy Год назад

You don't have to do this on any car

@cookiesawait 3 года назад

Question model y came with roadside assistance my insurance told me to get a roadside assistance let me know thanks..

@BeardedTeslaGuy 3 года назад

Can’t make that decision for you but I don’t have roadside on my insurance

@cookiesawait 3 года назад

@@BeardedTeslaGuy how about Tesla have a free roadside?

@caseyfowler9648 3 года назад

Can you do a video transferring my the lumbar support from your 2020 MY to your 2021? Looks pretty easy and I am doing it on mine via eBay. I cannot find a video on it and it would be nice to see…

@BeardedTeslaGuy 3 года назад

Ha, didn’t even think about doing that…hmm

@caseyfowler9648 3 года назад

@@BeardedTeslaGuy I am seeing people at n forums and Facebook groups asking how to do it. There is a video on removing the back of the seat, but nothing on the lumbar install. Looks simple though based on those who have posted pics.

@caseyfowler9648 3 года назад

So… I did the lumbar install on my June build. Super easy!

@philotmcgiffin2656 3 года назад

It appears that you cut out the sensors and tow eye. Do you reapply the cutout for the tow eye cover or does the kit provide one (looks like you peel back one for the tow eye cover). Are you using an Exacto knife for the cuts? Any concerns with damaging paint when cutting PPF?

@BeardedTeslaGuy 3 года назад

You need to cut very carefully, no pressure. The tow hook has a small pice that goes over it after

@hwaiskywind5624 2 года назад

what retractable sunroof shade do you recommand?i Look like there is only 2 company selling it.

@BeardedTeslaGuy 2 года назад

I haven’t seen a retractable one but that sounds very interesting

@Jane_quinones 3 года назад

Hello! I bought the full set to wrap my model Y. What are the other tools you’re using and the mixing ratio?

@BeardedTeslaGuy 3 года назад

It’s just alcohol and distilled water for the tack solution and distilled water with drops of Johnson baby shampoo

@sujit1858 2 года назад

How do you make the slip and tac solution?

@BeardedTeslaGuy 2 года назад

Slip is distilled water with a squirt of Johnson baby shampoo. Tack is distilled water with isopropyl alcohol 10:1

@Bvvbbx 3 года назад

Is there an expiry on the discount code?

@BeardedTeslaGuy 3 года назад

Nope

@hwaiskywind5624 2 года назад

I just got the ppf for the whole car from drive protected, when I install the front bumper, they did not car the circle for the tow hook and 4 sensors. Erictold me that I have to cut it myself. Can I leave the ppf on those censors without cutting it? thanks

@BeardedTeslaGuy 2 года назад

You have to cut them out, it will interfere with the sensors if left on

@BenBrand 2 года назад

This is disappointing to hear as in their own installation videos they say that the cutout for the sensor is important for making sure you have everything lined up correctly. In January they switch to their own in-house generic brand of PPF and no longer sell XPEL I wonder if there are other downsides as well. How did the installation go for you? I don't know if you've installed XPEL before but did you notice any difference with this new material?

@carlossilverio5193 3 года назад

Do the sensors remain covered by the PPF?

@BeardedTeslaGuy 3 года назад

No, I cut them out

@bububash3778 3 года назад

hello, I just bought ppf @ you're link In Canada , did you cut the Tesla hood emblem afterwards?

@BeardedTeslaGuy 3 года назад

It was precut in the pattern

@jeffc7329 2 года назад

I’m going to be doing this to my MY when I get it next month using your code (TY) but I also want to protect my windshield. I’m having a hard time finding anything for the MY though? What do you have/suggest? Thanks.

@BeardedTeslaGuy 2 года назад

There is a film out there that can protect from rocks, just can’t remember what it is called