CAN-BUS Diagnostics | Diagnosing CAN BUS with an Oscilloscope #canbus #oscilloscope

Explained! CAN BUS Diagnosis - How to Troubleshoot Faults.

Never waste PASTA SAUCE @itsQCP

Дивный аромат Плохих Песен😁😁 #shorts #slowslowcow #плохиепесни #аняпокров

Became invisible for one day! #funny #wednesday #memes

Хороший vs Плохой Полицейский в Реальной Жизни !

Test CAN BUS With a Multimeter | Quick & Easy | CAN Bus Resistance, Voltage & Short to Ground Test

Automotive Diagnosis: Cars Repair &Training Guides

Подписаться 47 тыс.

Просмотров 99 тыс.

50% 1

Видео Поделиться Скачать Добавить в

This video shows you how to test the CAN-BUS with a multimeter.
What is covered in this video:
00:42 CAN-BUS Basic
01:16 CAN-BUS total resistance test
03:30 CAN-BUS resistance check when there is open circuit in one resistance
04:17 CAN-BUS Voltage Test
05:30 CAN-BUS Short to ground test
Join the channel for more videos and more support:
www.youtube.com/@AutomotiveDi...
Please follow us on the following social media too:
/ autodiag001
/ automotivediagnosis
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.

Авто/Мото

Опубликовано:

29 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 107

@AutomotiveDiagnosis 11 месяцев назад

Please watch the following video for more information about CAN-BUS: CAN-BUS Explained | Everything You Need to Know About CAN-BUS | CAN-Bus Diagnostics & How It Works:ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bvyHx-C2Xfs.html

@carsrepaircenter4303 Год назад

A perfect tutorials, Keep up the good work.

@AutomotiveDiagnosis Год назад

Thanks 🙏

@dogniunsergedouho5361 5 месяцев назад

What an amazing video!! Thank you so much

@AutomotiveDiagnosis 5 месяцев назад

Glad you liked it!

@CanBus-li5ky 9 месяцев назад

Vey good inf this men spend the time to Teach , He. Is the Best , I am a Tech for Gm , this is the way GM Teach you

@AutomotiveDiagnosis 9 месяцев назад

Hi my friend, I really appreciate your nice comment and I'm glad you enjoyed it. there also another video for the CAN-BUS with much more details explained, you may find it by the following link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bvyHx-C2Xfs.html

@AutomotiveDiagnosis Год назад

Check this video too: Testing CAN-BUS with a Picoscope | Reading the CAN-BUS Waveform | CAN-BUS diagnostics with Picoscope ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xxEh5IFaTg0.html

@1960livvy Год назад

Great video - I will use this information to investigate the issues on my Jaguar XK8 or eliminate worries about the CAN BUS system - Many Thanks

@AutomotiveDiagnosis Год назад

Glad you liked the video

@reynaldoclaveria100 Год назад

Thanks a lot sir you enlightened my mind. You solved my problem about can bus.you make me feel better and confident automotive technician.

@AutomotiveDiagnosis Год назад

Glad to hear this video was helpful and thanks a lot for your nice comment.

@Dean-ob7fg 4 месяца назад

Very useful and straight to the point. Thanks

@AutomotiveDiagnosis 4 месяца назад

Thanks mate

@rahulnaadh5663 11 месяцев назад

Thankyou, informative 😊

@AutomotiveDiagnosis 11 месяцев назад

Glad it was helpful!

@laxonetrc Год назад

Easy to follow thanks

@AutomotiveDiagnosis Год назад

🙏🙏🙏

@bilndadhar2463 5 месяцев назад

Great and rich scientific video❤❤❤

@AutomotiveDiagnosis 5 месяцев назад

Thanks

@autokiaa9563 Год назад

Very informative 👍👍👍

@AutomotiveDiagnosis Год назад

Thanks

@chandrakantindapurkar8738 Месяц назад

Good video to watch again and again Thanks a lot

@AutomotiveDiagnosis Месяц назад

Thanks my friend. You may also watch the following video for B-CAN diagnostic: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GDsGjhNG_ys.htmlsi=vJ-AYV0t1At4rLKJ

@dimitricharaia1507 10 месяцев назад

Super video !!!

@AutomotiveDiagnosis 10 месяцев назад

Glad you liked it

@AutomotiveDiagnosis 10 месяцев назад

You can also watch the following video with more details about CAN-BUS: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bvyHx-C2Xfs.htmlsi=2mfJ-_n36OUzouGJ

@kingbojackson8822 Год назад

Excellent 👍

@AutomotiveDiagnosis Год назад

🙏🙏🙏

@10malabdullah10 Месяц назад

Great video

@AutomotiveDiagnosis Месяц назад

Thanks for watching

@suhailmunir1054 Год назад

Great 👍

@AutomotiveDiagnosis Год назад

Thank you 👍

@dimitricharaia1507 9 месяцев назад

Good super!!!

@AutomotiveDiagnosis 9 месяцев назад

Thank you! Cheers!

@user-tw8td1yl1u 5 месяцев назад

My man ❤❤

@AutomotiveDiagnosis 5 месяцев назад

Thanks my friend. You may also find the following video useful as I have provided more information in this video for CAN-BUS: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bvyHx-C2Xfs.html

@AA-EFI-AUTOS Год назад

Informotive❤

@Thomas-fc6gf 4 месяца назад

I love can bus

@AutomotiveDiagnosis 4 месяца назад

You may also watch this video for CAN-Bus: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bvyHx-C2Xfs.htmlsi=C9bWnhuVPHTqyDkG

@mohamedkhalkallah9342 Год назад

Thank you 🇲🇦🇲🇦🇲🇦

@AutomotiveDiagnosis Год назад

Thanks 🙏

@GrasnerThelemac Год назад

Yes

@darmaauto5108 Год назад

👍👍

@AutomotiveDiagnosis Год назад

Thanks

@fixitfirst7090 Год назад

Good work. Is there same resistance check on the body CAN as well?

@AutomotiveDiagnosis Год назад

Resistance and voltage are different on Body CAN. There is not any 120 ohm resistor as body electrical options can be different

@enghaider8322 Год назад

Good

@AutomotiveDiagnosis Год назад

🙏🙏

@kasems1536 22 дня назад

Thanks

@AutomotiveDiagnosis 22 дня назад

Thanks for watching

@AutomotiveDiagnosis 22 дня назад

🙏🙏🙏

@eggyburgers7017 5 месяцев назад

I have a reading of 0 Ohm on 6 & 14 on my Mondeo mk4. Any ideas what this means? I can’t scan codes so there is a problem.

@moramoy1 11 месяцев назад

I got voltage readings of 2.9 v for CAN high and 1.9 for CAN low. I am checking a dodge ram 2006. What would you suggest to do next? Thank you.

@AutomotiveDiagnosis 11 месяцев назад

Hi there, I would still accept this measurement as a good voltage. As mentioned in the video, CAN-Hi voltage oscillates between 2.5 to 3.5 V (yours is 2.9 V) and CAN-Low oscillates between 2.5 to 1.5 V (yours is 1.9 V). This measurement is just a bit different from what I did in the video, but it is still in the range as based on the activities in CAN-BUS and multimeter accuracy, the voltage value might be a bit different for each measurement, the only things that matters is to get something within the range when you measure with a multimeter.

@moramoy1 11 месяцев назад

@@AutomotiveDiagnosis These days I am trying to troubleshoot multiple faults in a single vehicle (Dodge Ram 1500, 2006): (From BCM) - B1648, B1661, U0101, U0100, U0121; (From WCM) - U0141; (From PCM) - U1120, U0141, U1411, U110C, U110E, P0058, P0032. The vehicle starts for about 4 seconds, but then shuts down. Do you have any suggestions on how to narrow the main culprit? Also, when checking for resistances and shorts for the CAN Bus, are ALL of them done with the ignition key in off, correct? Thank you for replying.

@aymenmohamed1134 Год назад

👍🏻👍🏻👍🏻👍🏻

@AutomotiveDiagnosis Год назад

🙏

@pabsmechanic Год назад

New sub here sir

@AutomotiveDiagnosis Год назад

Thanks my friend 👍👍🙏🙏

@connectwithcar 7 месяцев назад

❤

@AutomotiveDiagnosis 7 месяцев назад

👍👍

@HerbMoore3 Год назад

Is the Ford J1850 bus on pins 2 & 10 tested and diagnosed identically to CAN bus on pins 6 & 14?

@AutomotiveDiagnosis Год назад

Must be on 6 and 14.

@wannaPreG 5 месяцев назад

Can you help name the various CAN bus line, I heard you said one is called C CAN, I have this vehicle that says vehicle communication Bus C, so can you break down the various Communication CAN, Let say C Can included ( so so and so module ) B , A, D , E…

@davidyonko1101 Год назад

I have a question? can a CAN high/low wire be a regular #12 stranded wire ? That’s is what is used at my work In our pile plugs just a regular #12 stranded wire . Thank you

@mrchew1982 8 месяцев назад

Shielded twisted pair is better for this because it won't pick up as much interference... But as long as your traffic volume isn't crazy high due to packet loss or your modules aren't losing communication I wouldn't worry about it too much.

@guevaradelaserna85 Год назад

So is there a cable only for high can bus and another one only for the low?

@AutomotiveDiagnosis Год назад

Yes, two wires, one for CAN-BUS Hi and the other for CAN-BUS Low which are twisted together.

@toddthomas3226 Год назад

Good video but loose the music

@AutomotiveDiagnosis Год назад

Thanks for the comment. I personally rather not to have any music on the videos like most of our other videos.

@paho188_iron_phill4 7 месяцев назад

hi i have 57ohm resistance is that good or to low? and my canbus voltage is weird -0.13V

@AutomotiveDiagnosis 7 месяцев назад

Hi there, 57 is still good.

@jabbarjabbar1718 4 месяца назад

Whate is the different between can b bus and can c bus in usa cars?

@AutomotiveDiagnosis 4 месяца назад

CAN-C is the high speed CAN ( up to 1 Mbps) for Engine, Transmission, ABS, 4WD etc CAN-B is low speed CAN (up to 125 kbps) for body electrical units like BCM, smart key and so on.

@musamuslu4558 Год назад

I tried the short circuit test. An ohmmeter value close to 3 m ohm is displayed between can low-gnd and can high-gnd.

@AutomotiveDiagnosis Год назад

Hi there, thanks for sharing your experience. This shows that there is no short to ground.

@CanBus-li5ky 9 месяцев назад

@@AutomotiveDiagnosis because you spend time to give the ? I will put you page on my face book.

@AutomotiveDiagnosis 9 месяцев назад

@@CanBus-li5ky Thanks a lot, I really appreciate it. This following video also provides more details on CAN-BUS: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bvyHx-C2Xfs.html

@sandybil 11 месяцев назад

Hi, I have Volvo semi truck and have code : Mid 130 PSID 232 FMI 9 I checked ohms almost 60-65 Voltage 2.3 -2.5 volts Please what you think

@AutomotiveDiagnosis 10 месяцев назад

Your measurement for voltage and resistance is good. You may need to check the CAN-BUS connections on TCM.

@Mewanrahnam575 Год назад

More or CAN bus and LIN bus.

@AutomotiveDiagnosis Год назад

Sure thing 🙏

@AutomotiveDiagnosis Год назад

How to diagnose the CAN-BUS using a Picoscope and waveform: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xxEh5IFaTg0.html

@attaallaabdalla439 11 месяцев назад

CAN resistance between pin 6 and 14 of OBD connector.

@AutomotiveDiagnosis 11 месяцев назад

Yeah. Those numbers also mentioned in the video when you see OBD-II connector. Big numbers are just for the wiring diagram. And on the top left you see OBD-II sign and all numbers in small boxes.

@AASKAROFFICIAL 8 месяцев назад

Sir can lowcan high wire me voltage kaha se aata hai

@AutomotiveDiagnosis 8 месяцев назад

Hi there, there is a CAN controller inside each control unit which regulates the CAN voltage constantly.

@autowow7128 Год назад

If we have continuity between each can with ground that’s mean don’t have short? And how to know have a short with positive?

@AutomotiveDiagnosis Год назад

Hi there, there shouldn’t be any continuity between each CAN and ground, if there is any it means that CAN is shorted to the ground. To check the short to power there are two ways, first is to turn the ignition off, wait for a minute to make sure CAN is at sleep mode so there won’t be any voltage, then you can measure the voltage between each can and body ( positive on CAN and ground on the body), so if you read any voltage (normally if shorted you will get battery voltage) it means that wire is shorted to positive. The other way is to check the CAN voltage when ignition switch is on, so as you see in the video, normal voltage for CAN high is about 2.6 v and for CAN low about 2.4. So if you get battery voltage instead of normal voltage it means that wire is shorted to battery positive.

@autowow7128 Год назад

@@AutomotiveDiagnosis Thanks alot bro, Yesterday iam checked jeep compass 2017, after checking by scann tool we have many cods about CAN > u0010,u0056, CAN C bus , CAN CH bus and many code lost communication with (ECM/PCM , BCM,ABS, BSM ..) After checking can bus from OBD connector the can voltages don’t problem have CAN H 2.9 - CAN L 1.9 and we don’t have any continuity between CAN and ground. Then check the battery voltage the big battery is🔋 full charge but auxiliary battery 🪫 died. After replacing auxiliary battery all problems and cods are gone. In first we had 18 fault code .

@AutomotiveDiagnosis Год назад

@@autowow7128 Thanks a lot for sharing your experience. I've also had many different faults on CAN-BUS and every time fir a different reason. But it seems that I'm really enjoying of this difficulty 😅😅.

@autowow7128 Год назад

@@AutomotiveDiagnosis Our jobs full of difficults😅 it's tiring solving problems But in the end it is fun. Hope you succeed.

@AutomotiveDiagnosis Год назад

Thanks 🙏

@AA-EFI-AUTOS Год назад

How to check if can bus short to positive?

@AutomotiveDiagnosis Год назад

You can check the voltage between each pin (6 or 14 on OBD-II connector) and body ground when ignition switch is off. there shouldn't be any voltage. Also you can try it when ignition switch is on, this time CAN-Hi must be around 2.6 V and CAN-Low around 2.4 V, so if you are getting 12 V, it means that circuit is shorted to battery voltage.

@AA-EFI-AUTOS Год назад

@@AutomotiveDiagnosis thank u for reply💓

@AutomotiveDiagnosis Год назад

@@AA-EFI-AUTOS 👍👍

@alannobakht8503 9 месяцев назад

Your OBD2 Connector Picture numbering is wrong-- Pin-3 is Pin-6 counting from the left not from the right.

@AutomotiveDiagnosis 9 месяцев назад

Yeah, some wiring diagrams give two different numbers on OBD-II connector, one is for the ETM and the very small numbers you may see at the top or below the big numbers. Also at the left of the OBD-II you can see two small arrows to help with this.

@user-rr5sr9re8h Год назад

god

@MrBouziani2010 9 месяцев назад

.

@mrt-ee1zn Год назад

At obd2 port Can high is pin 6 , and Can low is pin 14, why you misslead people with different numbers in this video ??

@AutomotiveDiagnosis Год назад

I wish you checked the video more carefully before judging, the diagram is taken from the original wiring diagram so we haven’t changed it at all. Secondly, if you look closer, you still see PIN numbers for 6 and 14 that you are referring to which are just written at the top and bottom of the CAN terminals. So wiring diagram clearly shows that pin 3 and 11 are on the ETM and pin 6 and 14 are for OBD connector (shown by arrows at 02:25).

@mrt-ee1zn Год назад

@@AutomotiveDiagnosis checked again, sorry but still not see pin 6 + 14 referred as can high and can low, you should edit video, beginners can be missleaded :/

@ravigarage8745 Год назад

@@AutomotiveDiagnosis Hi there, yes, I noticed that in many wiring diagrams as well, that there are two different numbers for OBD-II connector (specially on Korean cars), thanks for clarification, I appreciate your work.

@AutomotiveDiagnosis Год назад

Check 02:08, at the very left side of the OBD-II connector, you see the arrows for OBD connector pins. When everything is mentioned in the wiring diagram we can’t just change the original diagram in a way we like as it may cause more confusion!!

Далее

CAN-BUS Diagnostics | Diagnosing CAN BUS with an Oscilloscope #canbus #oscilloscope

6:41

CAN-BUS Diagnostics | Diagnosing CAN BUS with an Oscilloscope #canbus #oscilloscope

Просмотров 9 тыс.

Explained! CAN BUS Diagnosis - How to Troubleshoot Faults.

11:49

Explained! CAN BUS Diagnosis - How to Troubleshoot Faults.

Просмотров 227 тыс.

Never waste PASTA SAUCE @itsQCP

00:19

Never waste PASTA SAUCE @itsQCP

Просмотров 4,8 млн

Дивный аромат Плохих Песен😁😁 #shorts #slowslowcow #плохиепесни #аняпокров

00:35

Дивный аромат Плохих Песен😁😁 #shorts #slowslowcow #плохиепесни #аняпокров

Просмотров 51 тыс.

Became invisible for one day! #funny #wednesday #memes

00:25

Became invisible for one day! #funny #wednesday #memes

Просмотров 2,3 млн

Хороший vs Плохой Полицейский в Реальной Жизни !

24:40

Хороший vs Плохой Полицейский в Реальной Жизни !

Просмотров 582 тыс.

The Trainer #47: What measuring voltage on the ground side means

9:38

The Trainer #47: What measuring voltage on the ground side means

Просмотров 1,4 млн

How To Test CAN BUS With A Multimeter [CAN Bus Resistance Check] Mechanic Mindset

7:25

How To Test CAN BUS With A Multimeter [CAN Bus Resistance Check] Mechanic Mindset

Просмотров 234 тыс.

CAN Bus Communication Explained (Part 1)

33:44

CAN Bus Communication Explained (Part 1)

Просмотров 217 тыс.

The Trainer #111: How To Troubleshoot CAN Communication Faults

17:08

The Trainer #111: How To Troubleshoot CAN Communication Faults

Просмотров 81 тыс.

How to Test Cooling Fan Resistor with Multimeter | Test Radiator Fan Resistor #radiatorfan #engine

9:12

How to Test Cooling Fan Resistor with Multimeter | Test Radiator Fan Resistor #radiatorfan #engine

Просмотров 2,1 тыс.

Can-bus Trouble

27:35

Can-bus Trouble

Просмотров 698 тыс.

CAN-BUS Step by Step Diagnosis | Resistance, Voltage, Short Circuit & Pin to Pin Diagnostic #canbus

18:42

CAN-BUS Step by Step Diagnosis | Resistance, Voltage, Short Circuit & Pin to Pin Diagnostic #canbus

Просмотров 3,9 тыс.

DLC Quick Testing Tips

7:12

DLC Quick Testing Tips

Просмотров 184 тыс.

How to use a multimeter like a pro, the ultimate guide

12:55

How to use a multimeter like a pro, the ultimate guide

Просмотров 1,6 млн

How to do Automotive CAN BUS Voltage Test

29:15

How to do Automotive CAN BUS Voltage Test

Просмотров 93 тыс.

Обочечники жёстко обламываю на М5 #shorts

0:58

Обочечники жёстко обламываю на М5 #shorts

Просмотров 6 млн

Гидроудар на мерсе - спас деда Танком 300! #tank300

1:00

Гидроудар на мерсе - спас деда Танком 300! #tank300

Просмотров 8 млн

TOYOTA @ArcticTrucksRussia ремонт в лесу... #aleksey_mercedes

0:12

TOYOTA @ArcticTrucksRussia ремонт в лесу... #aleksey_mercedes

Просмотров 172 тыс.

#hopping #hop #lowrider #street #lowlow #culture #trending #viral #explore #fyp #fypシ゚viral #reels

0:12

#hopping #hop #lowrider #street #lowlow #culture #trending #viral #explore #fyp #fypシ゚viral #reels

Просмотров 18 млн

☠️#azeribass#azelow#trending #azerbaijan#vaz#2107#azelow#baku#peredo#azeri#azeribassmusic#bass#xrom

0:20

☠️#azeribass#azelow#trending #azerbaijan#vaz#2107#azelow#baku#peredo#azeri#azeribassmusic#bass#xrom

Просмотров 3,9 млн

Новая ТРАССА М12 ВОСТОК - ЦЕНА проезда?

0:49

Новая ТРАССА М12 ВОСТОК - ЦЕНА проезда?

Просмотров 835 тыс.

Volkswagen судится с Volkswagen?

1:00

Volkswagen судится с Volkswagen?

Просмотров 2,3 млн