TESTED with 45 ACP: Berry’s 185 grain HBRN Bullets

Подписаться 353 тыс.

Просмотров 15 тыс.

50% 1

Full Story: bit.ly/3qPMuWp
UR on RUMBLE: rumble.com/ultimatereloader
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
We recently showed Kyle Shields loading .45 ACP on the Dillon XL-750 with the Double Alpha Academy Click-Adjustable Powder Knob. Today, we’re taking a closer look at the bullet we used-Berry’s .45 ACP 185 grain hollow base round nose bullets!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RU-vid channel (gavintoobe).
Any reloading data supplied on this RU-vid channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RU-vid channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Berry's Plated Bullets
- Dillon Precision
- Hodgdon Powde
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@jarodsown2596 Месяц назад

In 45 I have a Taurus and Charles Daly 1911s. Love them both. I’ve got a compensator on the Charles Daly. I reload with mostly Rocky Mountain Reloading bullets, but have used Berrys and X-treme bullets too. For 45 I really like power pistol powder.

@chevrofreak 11 месяцев назад

You were looking at load data for the Barnes Tac-XP, which is a solid copper bullet that loads more like a 230gr lead core. This is the inappropriate way to find a charge weight. It is, however, safer than loading a copper bullet using lead data as that will always result in overpressure.

@datdudenosense 3 месяца назад

I'm pretty sure he knows that homeboy...😑

@chevrofreak 3 месяца назад

@@datdudenosense doubtful, but anyway...

@johnc5874 2 месяца назад

Yeah, I didn't get that.

@bluescatreimer 11 месяцев назад

Great bullets, I have been using Berry's bullets for several calibers for over a decade now.

@jamesarvin9539 11 месяцев назад

Want to see the new Franklin Arsenal X-10 press…

@j0hndunphy300 11 месяцев назад

My 45 acp pistol kimber eclipse nice video i have use berrys for a number of years now good product

@guyminer3168 11 месяцев назад

Good video guys! I've been using that bullet for years in my 1911 for low recoil, accurate, budget friendly loads.

@l.a.3887 11 месяцев назад

Fantastic bullets

@natejackson4791 11 месяцев назад

AA2, AA5, Winchester 231 powders. As far as the press, my suggestion is a working man's type, Lee progressive and turret types. For me, the Dillon isn't anything I need nor want. I don't load those type quantities to have a press like that. Edit, I even load on a single stage Lee.

@markrolfe8945 11 месяцев назад

Smith and Wesson MP 45 with apex trigger. Was ready to trade it in before I replaced the trigger, now it's my favorite.

@chrissidwell9455 11 месяцев назад

I have a Ruger 1911, a Remington R-1 1911, a Para Ordinance GI Expert 1911, - all 5" government modles, and a Springfield XDS 4" , all in 45acp. The load I shoot in all my 45's is the 230gr Berry's fmj solid plated bullet, 5 1/2 grains of Unique, WLP's, in any brass for around 820fps in my 5" guns and 800 fps in the XDS. Good accurate load in all my 45's and fairly easy on the guns for a target plinking load. Yet close enough to regular army ball ammo to work in a pinch for self defence.

@Nuke8401DaveE 11 месяцев назад

Great video. I have reloaded/shot thousands of Berry's using a Lee Loadmaster with a FCD for IDPA/SSP/9mm and always found them accurate at those ranges. When you shoot thousands of rounds a year and use Berry's there is a good chance you are using range brass, not new. Maybe go through a streamlined process for reloading range brass that requires primer pocket swaging and possible case trimming? Honestly, I never trimmed handgun brass, but primer pockets are the slow step which many times requires off press work. Thanks!

@Iscariot18 11 месяцев назад

Berry's 230 gr. plated, 6.7 gr. Power Pistol. Quite stout, very accurate.

@Greenjeans2020 11 месяцев назад

My favorite .45acp, hands down, is the 1911. I load on a Dillion 550B. I have loaded cast, plated and jacketed for the .45 over the years. For practice and USPSA competition it makes sense to use plated bullets. I have used Berry's, Rainer and Extreme with near equal success. I have also loaded polymer coated and Moly coated. I have a test barrel filled with rubber mulch to recover the bullets after firing. With polymer the coating does come off so I no longer use them. Copper plated and Moly hold up the best.

@traviscohan9016 11 месяцев назад

Gavin, you should bring out the 6 dasher again. Try the Berger 108 bt

@Gunner40Five 11 месяцев назад

Great bullets, used to load them by the 1000s for IDPA. Keep up the good work Gavin.

@michaelpistone8235 11 месяцев назад

Between 9mm and 45ACP I'm in the ten thousand plus Berry's bullets. They just plain work. I have 8 or 9 very nice 1911s from Kimber, Springfield TRP to Dan Wesson and a custom Ed Brown; my Glock 21 with a aftermarket trigger shoots more accurately than half of my 1911s.

@Inflorescensse 11 месяцев назад

Wow. Id like to download these for full auto use in the Reising!

@drdes9609 11 месяцев назад

Rcbs 45acp and 380. Use Berry’s in my 45 love them.

@Angelina-xj5zd 11 месяцев назад

I use them with good results.

@ThePbrown1 11 месяцев назад

Hornady ap press 223

@pbeardy 11 месяцев назад

Good and fun video! I am a newer loader and the most frustrating thing for me has been loading Berry’s in .44. I am using their 240 grain flat point and they have an ever so slight cannelure. I cannot get the roll crimp right on these and it feels like I am over crimping them because there is no groove for me to set into. If anybody has any advice I am all ears. Rock on 👍🏻

@garyheitzmann4835 7 месяцев назад

I'd like to see ashow that loads 44 spec to its full potential using modern revolvers. Something between typical 44 spec load data and the 44 mag. Thanks

@jonathanlogan6647 11 месяцев назад

Been using these for years. I like these bullets better then the 230s. Also have had great success with the 128 9mm bullets as well

@jonathanlogan6647 11 месяцев назад

Also how far out are you setting that crono? We are close to the same load used (5.9 vs 6) and we have about 150fps difference between our loads

@CrashRacknShoot 11 месяцев назад

Elevation, temperature, humidity, powder storage methods, and the chronos themselves all differ.

@jonathanlogan6647 11 месяцев назад

Not a hundred 150 fps. Elevations plays little into muzzle velocity, temp yea but me and Gavin live in similar environments that way. Storage I don't believe that's it either as I have a hard time believing he just let that ammo or powder sit around until it was compromised. Chrono, well that's why I asked. That load should be doing over 900

@CrashRacknShoot 11 месяцев назад

@@jonathanlogan6647 eh, who knows. Could be a bent chrono arm causing havoc lol. But yeah you're right, 150 fps isn't something to ignore, especially in something relatively slow moving like .45 acp.

@jasonhettenhouser4115 3 месяца назад

Thanks for the great info! I'm curious how you decided to use Barnes tacxp data for a berrys hbrn?

@jamesahoffman 11 месяцев назад

.380 or 9mm Nato on a Lee classic turret set up for auto-turn progressive as a beginner setup with the Berry's bullets? A cheap beginner starting point with least money involved, walk through powder/ primer selection, dies, powder feed, ect.

@kenmcvie6350 11 месяцев назад

Over crimping can cause headspace problems on cases that headspace on the case mouth - ie:45ACP, 9mm, etc

@DavidHernandez-dq1ih 11 месяцев назад

Hornady LNL Loading a wildcat

@karlcapobianco8121 11 месяцев назад

I think it would be really great content to test how affective throwing knives are on a ballistics dummy.

@Ultimatereloader 11 месяцев назад

Sounds interesting for a different channel 😀

@9900Lucky 2 месяца назад

What is might the difference be between small pistol primer vs small pistol mag primers. Consider many manufacturer are using small pistol in there loading and I reuse there brass. Have you tested a difference in the small vs small mag primers? I have concerns on pressure.

@Milspecpoptart 11 месяцев назад

Yall need some 10rd wilson combat mags for your scientific testing in the 1911...

@bobg1443 11 месяцев назад

Didn't you have a similar video using VihtaVuori N310? Is there a significant difference using the CFE Pistol?

@robertbrown826 11 месяцев назад

Smith and Wesson, MP 45 2.0. I also have a Glock 21 GEN two that I love.

@bigsexy8723 10 месяцев назад

Under 800fps from 185 g no loading them way under pressure

@kenmcvie6350 11 месяцев назад

45ACP Colt Gold cup. Beautiful pistol.

@curtisross6080 11 месяцев назад

A video series on loading the .445 Supermag would be fun to see!

@Charles_ONeal 11 месяцев назад

Springfield Armory 1911 A1 for me.

@anangryranger 11 месяцев назад

Same here. I've been shooting the plain G.I. model for 43 years. Just now rebarreled it. Great weapon! Picked up a rusted up RIA 1911A1 FS a couple weeks ago, and did a full restoration on it. It's prior owner never cleaned or lubricated it for ten years! It was just short of being a trotline weight, but it's all good now.

@DadWil 11 месяцев назад

How bout the 38 super in a 1911 platform?

@tonydevich7937 11 месяцев назад

Cdp kimber, it's a carry

@Inflorescensse 11 месяцев назад

So ive notice shooting berrys 230 grain out of the 11-inch Reising M50 SMG at 200 meters I'll occasionally get bullets I can actually see in the spotting scope spiraling into Target It almost looks like 18 inch diameter prop wash or a drunk moth. They are however not keyholing and at 100m a 5 shot group looks good at 6 inches. Anyone have any idea what is happening?

@ralphhernandez3521 11 месяцев назад

I do believe you are seeing a vapor Trail from the bullet. I have seen this a few times on humid or cold days from several other videos. In my own experience, I witnessed this shooting 50 caliber, hollow base bullets just before sunset. my friend and I were astonished at this, but soon figured it out.

@kuronyan3006Ackley 11 месяцев назад

✌️👍‼️

@rudymagg 4 месяца назад

Can you use that data with those bullets?

@johnc5874 2 месяца назад

Seems way under charged to me.

@thelittledetailscr7231 11 месяцев назад

I tried platted bullets. Didn't have great results and jacketed bullets are not that much more.

@CrashRacknShoot 11 месяцев назад

With as popular as plated bullets have gotten, I often find them to be more expensive than jacketed nowadays.

@tinncan 11 месяцев назад

Where are you buying bulleted from? Xtreme are still like 10crp cheaper than every jacketed projectile I could find...

@CrashRacknShoot 11 месяцев назад

@@tinncan ooooh it's always a fun day when I can recommend ammoseek to somebody! Check that site out, my friend. Everything from components to fully loaded ammunition. But every time I research a bullet for plinking, I can almost always find FMJs cheaper than plated. Now *quality* fmj vs plated, and you have yourself an argument 😄

@deltaforcereviews 11 месяцев назад

Now 185-200 grain is my 45 preference

@leestraight6851 11 месяцев назад

Hornady LNL 9mm CFE powder.

@bradfordturkington964 11 месяцев назад

Gavin I know you’ve been apolitical. However, Jarrod (guns and gadgets) needs help. Please share his message at will as much as possible. Latest is our friends, fiends, wish for you to now report and track your provisions. Concord, MA all over again! Please urge friends, family, and subscribers to write, send, post their opinion to the powers to be who wish to implement their rule over us!

@bradfordturkington964 11 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-anS4LBS5IcU.htmlsi=26iM4WS6pJEHdgL-