Testing The Dewalt Shear Attachment 

Pick up a set for yourself here! amzn.to/2S3XNFF

that why you’re able to rotate the shears (when battery is getting caught on the metal) the benefit of this tool over the malco tool is you can cut with one hand instead of two hands as required with malco. anyways. Good review.

I love the way you do testing all tools, my man!

Had one for 2 years. Works great. Mostly use to cut return air sides on furnaces.

It's hard to believe something that small has such power.Nice vid.Thanks.

Just got mine last night. Ready to test it out at the job today! It actually fits the m12 Impact Driver as long as you use the 4.0 or 6.0 battery.

Nice channel! Definitely unique as I haven’t come across a channel specific for hvac tools. Cool concept man, appreciate you.

Great review. Using on different brands is very helpful!

got on at xmas and was highly impressed i typically ust it upside down to avoid hand ups on my makita impact its a win all round!!!!

I need one! Got a new project coming up! You convinced me!

I run the M18 cordless shears now but they’re bulky, would love to try this one out would be nice to throw in the tool bag. Thanks for the great content and opportunity!

One handed operation looks damn useful. Good review!

This is JUST what I’m looking for! I need to make some support brackets for a vinyl fence using metal channel. I was debating how to cut the metal and this looks like it will work perfectly! 11:02 Thanks for showing this! I’m buying one right now!

good video mate. been using these for about 4 yrs now. Use to run the malco turbo shears until they changed there head design, then swapped to the dewalt. speed is the key with these so the faster rpm the better u cut. i run it with the dewalt impact driver as nice in the hand and i use it with the driver upside down. highly recommend these for a cost effective metal shear.

Bought this tool recently. Thought the pivot brace arm would only work with Dewalt drill. Good to see it works with other drill as well.

Looks like a very fun tool.

Awesome. The video I was looking for. Cheers

Would love to see you demo this product on a few different gauges of duct/duct seams vs flat metal.

Great reviews 👍

That thing is pretty cool works better than I was expecting

Nice ! Thank you!,I`m going to pick one up!

Looks pretty sweet!!

I've been contemplating about getting some sheet metal tools. this looks like a good opportunity

Works a lot better than I expected.👍

That thing looks incredible 🤙🏽

Damn! My hands thank you for this review!

That is why you're able to rotate the shears when the bettery gets caught on the metal. The benefit of this tool over the Malco tool is you can cut with one hand instead od two hands as required with Malco.

Great tools

Nice. I'm surprised it seems better on the drill vs. impact. I just picked one up, as my hands are tired from using manual snips. ;)

The metal shears are pretty neat and I can do a lot of things for them

I bought one from Lowes and put it on our Kobalt and It didn't do very well wouldn't stay connected to the drill. So I'm going to try and put it on another brand we have. Thanks for the tool in action..

Never seen this one looks sweet! I’ve always debated on picking up the Malco version

Great review with various devices and cutting thicknesses. The Dewalt DT70670 has a 360° rotating head. You can cut in any position, the machine can go to 90°, so the battery doesn't bother you. Hug

I would love to try it out

I think it was a good review, that works pretty good . I think I’ll get one for work 👍

Thing is sick! Would love to have it

That's a cool little tool.

Works well. 👍

I just bought one today I like so far

Cool tool

Ok so now a serious comment/question. I noticed from the link you pinned something that I didn't pick up on from your video and that may limit the types of tools that it can attach to. The "universal" brace looks like it will only work with cordless tools that have a flat type battery pack or a grip with a lump at the bottom for the brace to wedge onto. Any tool without that like a corded drill would have nothing for the brace to wedge into and therefore wouldn't brace. I guess you could technically attach a clamp of some kind to the base of the handle to take the place of the battery pack. Also I am not sure that I would be comfortable with the brace putting pressure onto the battery pack over time it seems that it would be damaging to the tool. Maybe this isn't a problem for the home gamer market where its use would be intermittent in most cases. It doesn't seem likely that it would be something used by a business or in an industrial setting. With the above in mind could a clamp or similar be used to effectively hold the brace in the same way that it functions when used with a cordless tool?

OMG I need one of those in my life

Nice Attachment

Pretty cool

I'm looking at how you get the thing from the way it is in the package to fit on the drill! Did you unscrew some screws or what?

How is this compared to the malco version and the original malco version with the handle?

Just got one it looks super 👌 on video figure mine will do the same

Would be nice to see how it cuts across roofing metal sheets

Ever try this out on thinner titanium sheets by chance? .5mm or 1mm gr5. I'm guessing the .5 would work, but unsure of the 1mm.

I really liked the video, I was a little concerned at first didn't know what to expect, but as you showed it makes short work of varying thicknesses of sheet metal. Just what I need, I will be buying one. Thanks again, I always like to see what the professionals think, before I make a purchase of a tool I haven't used before. 🖖😎

That would be perfect, i do a lot of sheet metal cutting

Will this work for cutting fence?

How long does shears last? Can they be sharpened?

I just picked one up today , it fits DeWalt rather well but won't open up wide enough for Ridgid drills

I cut a lot of butler tin using tin snip. Wondering if that would do the job?

How does it work on an electric drill, with the dealt shearer

Thank you for posting,, will this work on a Ryobi 18V cordless drill ?

Love the one hand operation. Thanks for the videos!

my dream tools😃

Will it cut stainless steel?

does it cut slate ?

paused the video going to go purchase this very instant

I would think that if you used a rotary hammer type of drill, geared drive drill, or a dugga dugga air gun to power the attachment it would only be limited by the gap between the cutters as to what it would cut through (material depending)

I plan on going with the malco turbo shears and see how they do.

You know how there’s right and left sheet metal cutters .. which of those two would this adapter replace?

It's a pretty good tool for hacking thru the plastic packaging it comes in.

How thick of sheet metal can this cut?

Could you rotate the tip enough to where the battery won’t hit on the Milwaukee drill ?

Just turn the drill or attachement to cut side ways instead of straight so the battery wont catch.

Hi .. did you try this on Corrugated roofing?

Impressive, didn’t know it existed either but def looks a handy tool.. how many years have you been in the trade?

Blades can be opened up to cut thicker material a little better

Why does nobody test cutting curves and raised bumps with these things?

How do u think it would do cutting a return hole in side of furnace

Nice

I need it to work on Fiber Cement hardi boards.

awesome

be good if they made an attachment that cut c studs

Cool, never seen it before either for a Dewalt. Way quicker then my tin snips.

think I could cut out metal signs for my wife craft

Might I suggest having more light. It's hard to see anything with it so dark

Seening this now I want one lol

Hello, what gloves are those? cheers

I want to see it used on vinyl plank

Hello! I recently bought this shear tools and i've noticed that the upper part of the blade (the one that swivels up & down) it's a little loose (has a little play when it's not used). it's normal or it's something broken or untighten inside? can you please confirm if yours it's the same please? thank man!

I just bought the same shears you have here. Have you noticed when you run it on the impact, the impact gets really hot?

lol that yellow looks a little off from the regular DeWalt and the logo looks a bit cheap too. I wouldn't be surprised if you didn't buy a knock off version of that attachment.

Like it

Don't need you to give me advice on a tool. This attachment is great whether you liked it or not, whipper snapper!

Rediyl tyre katne ke liye koi masin hai

Hardie backer

better off with a grinder, unless your doing "light" cutting.

What about cutting Amazon cardboard boxes?

Who makes that lol tool you had to measure the steel thickness

first time

The malco shear is the way to go!

Don't Milwaukee make one of these

What will they think if next? Jesus christ.

junk, wont last long