No video :(

The BEST RC motor fans - Ultimate DIY buyers guide

Подписаться 9 тыс.

Просмотров 20 тыс.

50% 1

For an "above and beyond answer to your questions" ask here:
asqme.com/@Eas...
find your parts here first - Organized Storefront
www.amazon.com...
East Tactics MERCH (Shirts etc)
east-tactics-shop.fourthwall.com
FYI, you can sometimes pick up the special ESC adapters, the fans, even the adapter for the heat sink on Amazon
See DIY link below. Also watch this video for a tip on connecting the fan to the heat sink
• 3 Tactics that may be ...
Time stamp 3:18
If you cannot find the ESC and Heatsink adaptors on Amazon, search the following on EBAY:
40mm Universal Fan Mount
for the fans themselfs check out Allie Express
DIY High Power fan Project (Parts)
amzn.to/2GTPpWt
Support my Channel
Buy me a coffee: www.buymeacoff...
Join my RU-vid channel: / @easttactics
Support me on Patreon (thank you): www.patreon.co...
Hit up my PayPal (thank you): www.paypal.com...
To purchase East Tactics merchandise: www.teepublic....
**QUICK ACCESS PRODUCT LINKS BELOW**
DIY High Power fan PROJECT Playlist
• DIY RC High powered fans
DIY High Power fan Project (Parts)
amzn.to/2GTPpWt
OFFSET 40mm ESC fan adapters
www.ebay.com/u...
40mm fan HEATSINK ADAPTER/MOUNTS
www.ebay.com/u...
HERE'S WHERE YOU CAN GET YOUR CUSTOM 4MM FAN COVERS (And other Accessories)
40mm Motor or ESC Fan Covers, 3D Punisher Skull
www.ebay.com/s...
40mm Motor or ESC Fan Covers, 3D Spartan
www.ebay.com/i...
GET THOSE FANS HERE
Amazon -
Buy 1 - amzn.to/3xSuEl3
Buy 5 - amzn.to/3bcc3sg
Buy 10 - amzn.to/3zUHYb7
AliExpress -
1 pack - s.click.aliexp...
5 pack - s.click.aliexp...
More Arrma Kraton V4 and V5 (Parts and upgrades)
amzn.to/3meGPBU
Shock Mitigation PROJECT Playlist
• Shock Impact Mitigatio...
Shock Mitigation Projects (Parts)
amzn.to/3bVZAFw
Arrma Kraton EXB Parts (Parts and upgrades)
amzn.to/3hqYlPG
Temperature Thresholds
Motor
Ideal - 140° 60° C
Hot - 150 - 160° 65.5° - 71.1° C
Overheat - 165° 74°C
ESC
Ideal - 135° 57.2° C
Hot - 140 - 150° 60° - 65.5° C
Overheat - 155° 68.3°C
As an Amazon Associate, qualifying purchases support my channel.
East Tactics MERCH (Shirts etc)
east-tactics-shop.fourthwall.com
BATTERY CONNECTOR CONVERSION TOOLS (If needed)
EC5 Connectors - amzn.to/2LGMEak
Soldering Iron - amzn.to/2Tiu1h2
Solder station w/ Solder - amzn.to/2ZhKqWW
Shrink tubes - amzn.to/2WIQMwQ
#1 upgrade VIDEO - • Installing the M2C Cha...
NOT FOUND ON AMAZON
Alternative option for shock Standoffs from M2C (comes with Nuts) - m2cracing.net
2.25mm steel diff pins (You cut w/Dremel) - www.mcmaster.c...
Better Diff Gaskets V4 - [tekjo 1/8 scale diff gaskets on EBAY]
High End Dog bones - amzn.to/36gGIOJ
DIFF FLUIDS and LUBE
External Diff lube - amzn.to/2WGgYbo
Rear - 20k - amzn.to/36cYF0y
Center - (200k or 500k)
200k - amzn.to/2X6qCD2
500k - amzn.to/2WHyz2q
Front - 80K - amzn.to/3g4NKKI
DROOP SCREWS
Alt Droop Screws found at www.amainhobbies.com
Alt Droop Screws found at M2C - m2cracing.net
FIX YOUR STEERING - SERVO SAVOR MOD INFO
Servo Savor fix VIDEO - • ARRMA KRATON V4 V5 STE...
Snap Ring kit - amzn.to/2zPN0Zp
Quality Servo - amzn.to/2XaZDGA
Info about BEC VIDEO - • PART 2 - ARRMA STEERIN...
BEC - amzn.to/2AFnqXn
COOLING OPTIONS
NTF fans - Contact NTF Racing through Fb messenger
Fan/heat sink combo - amzn.to/2AEA8Wp
Stock ESC fan - amzn.to/2WWjPND
Heat Gun - amzn.to/36ec2gR
MISC TOOLS
Exacto knife - amzn.to/2TtHIK8
Dremel - amzn.to/2TkmDSh
Protek hex drivers (Drill Compatible) - www.ebay.com/p...
CLEANING/LUBING PRODUCTS
WD-40 - amzn.to/2LFjiJ9
Degreaser - amzn.to/36clykG
Cleaning out diff fluid - amzn.to/2Zlilhk
loctite Red - amzn.to/2TnBBa2
loctite Blue - amzn.to/2zTKt0c
BODY REINFORCEMENT TACTIC
Shoe Goo (need 2) - amzn.to/2LHxEsL
Fiber mesh - amzn.to/2AKfAMd
*If you've read this far... you're awesome!
Please consider supporting my channel through Patreon
For less then an energy drink per month, it would mean alot!!
/ easttactics
Quick Gesture of Support - www.paypal.com...
#EastTactics #ArrmaMods #ArrmaKraton #ARRMARC #RCCARS #RC

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 128

@timthomas4040 3 года назад

Game changer rc fans only way to go..

@EastTactics 3 года назад

Maybe... but I still don’t know what fans exactly he uses. I can vouch for the ones I found. That and... if you plan to retrofit more then vehicle. DIY is way more ideal. Thx for commenting

@EastTactics 3 года назад

Hey brother... I hope ya mean that.. not sure... but if you dig through comments here when your brought up I do say you are legit, and your prices are WAY BETTER then others. 👍

@gamechangerrc4633 3 года назад

@@EastTactics Thank you I really appreciate it.

@yorkrojas1452 3 месяца назад

You are Amazing Dude!!

@EastTactics 3 месяца назад

Wow, thanks York!

@basementracer7622 2 года назад

Excellent video, super informative. Thanks very much. Also thanks for the alert to the "skip waffle".

@rcjunkie260 3 года назад

My fans just got on a plane in china! Just got in the circle type metal fan covers. 1/4" 6'×12' aluminum sheet is coming today. Just have to see what length bolts needed after I make the adapter plate! And next new body will get some plastic dip! I was watching some of your buddy coconut! Thank you!!! Enjoy the day!

@EastTactics 3 года назад

Right on brother!! I use 4 M3 40mm bolts/screws. Of course I also incorporate two tiny layers of Sorbothane into the mix for shock impact absorption. So 35 mm might be what you need, unless you to also plan to incorporate some shock mitigation.

@gees5563 3 года назад

Awesome video great info I actually ordered 5 fans from AliExpress and some carbon fiber covers and a mesh to protect the fans from dirt and leaves and stuff like that thank you 💯👍👊

@EastTactics 3 года назад

Amen! Luv to see it, thanks for following brother!😎👍

@DirtyBob200X 3 года назад

On my 4X4 Slash I'm running a Yeah Racing heatsink with their 30mm wind pressurizer fan. That thing pushed an incredible amount of air.

@Boogie_the_cat 8 дней назад

I appreciate you setting up the Amazon "buy list" but those iexcell M3 0.5 hex screws are terrible. They're 304 grade stainless steel, which is significantly softer than even 6061 aluminum. I bought them anyway, but i regret it because the heads on them strip so fast they were useless for me. I couldn't even screw one more than 3/4 of the way into my 40mm fan before the head stripped and i had to rotate it out with pliers. Not cool. Anyway, the rest of the tutorial works, so thanks for that.

@LittleTimmyPool 3 года назад

Keep up the good work bud! Good info... GameChanger RC is a good guy!

@EastTactics 3 года назад

Agreed, one of the few that offers a good price. Thx for watching!

@LittleTimmyPool 3 года назад

@@EastTactics shoot me an email sometime, want to chat with you on an idea or two gimartinez8501@gmail.com

@EastTactics 3 года назад

Sent

@juliansimon5243 3 года назад

Hey East Tactics thanks for another informative vid bro👍. I implemented your cooling tactics with those exact fans and man the difference it makes is absolutely amazing!!! These fans are crazy. I just bought some 3s balance lead connectors and soldered the male end to the fan leads and that brought the cost down a little more.

@EastTactics 3 года назад

Nice... i’ll be sure to mention that idea when I’m creating my video on how to create the switch/splitter/direct to the fan connectors. Thanks bro!!

@zeelong1589 6 месяцев назад

I can hear you just fine

@EastTactics 6 месяцев назад

Thx

@jcocanour 3 года назад

What a great video. And not just for those who don't know where to start when it comes to upgrading their RC but everyone. Extremely comprehensive diy video on how to cool your electronics and at the perfect time, right before summer. Keep it up Randy.💪🥥

@EastTactics 3 года назад

Thanks my good man!!

@drroomba5045 Год назад

Great video. FYI - the Yeah racing YA-0600 heat sink mount appears not a good match for the spektrum SPMXSM1700 in my 6s EXB. Motor is approx 40mm diameter and the YA-0600 is suited to 40.8mm. Didn't check this before purchase and too much slop. Guess I could wedge something inbetween to take up the 1mm but not ideal.

@EastTactics Год назад

Yes, some of these heat sinks actually do come with a thin metal sleeve. You could probably take a deconstructed hose clamp and fit some pieces hidden in there.

@MiaUy 3 года назад

Nice RC motor! Stay safe!

@HardcoreRC 3 года назад

Another good video 👍 think Alden Cost may be looking to design an ESC mount in the USA

@everythingrc2324 2 года назад

You are THE man… thank you so much!!

@EastTactics 2 года назад

Thanks brother!!

@KurtsRCs 3 года назад

Nice video with lots of great information

@EastTactics 3 года назад

Yes… Those are pretty clean, for me after shipping it comes to $25.19. Also he’s got the connection for 3S battery which is great. However the other side is a compatible connection for his fans, which if you go with his fans feel great. My DIY process actually has you convert the inbound fans from AliExpress to JR connectors. Which basically gives you the option to directly plug into your ESC or your receiver box. But yeah, GCRC is a legit and has more fair pricing.

@rcpd3157 3 года назад

Another great video with great tactic!

@g.b-MTB-trail-jumps3062 3 года назад

Great dude... Best fans Kip it up mate👑

@g.b-MTB-trail-jumps3062 3 года назад

The yr alsow good fans..and the head stik💪

@Youworstnightmare77 3 года назад

I built 2 set of 2 ny mine shelf amd coste lest the.half of what I pay for a "brand" I think Is recognized as game changer fans

@danimudura3213 11 месяцев назад

I have a 1650kv hobbywing motor with max8. Why does my esc keep going into protection?

@FLSharkdiver 3 года назад

I like my #GCRC fans!!!

@EastTactics 3 года назад

Awesome, I would say of the 3rd party venders selling these packages, Game Changer Rc is the best price. What RC do you run? Also... if your willing could you drop a link (for others to see) of the eBay package you snagged? Thx

@FLSharkdiver 3 года назад

@@EastTactics I run the Power Glides V2 on my Notorious and the NEW "IMPERVIOUS" for my Infraction and I use an on/off switch as well from #GCRC.

@samcourtrc6767 7 месяцев назад

Hi buddy I’m looking the aluminium adapter that sits on the top of the esc could u point me in the right direction thanks buddy love your channel

@EastTactics 7 месяцев назад

Search 40mm Universal Fan Mount for BLX185 On eBay

@samcourtrc6767 7 месяцев назад

@@EastTactics ur a gentleman

@DoubleClutchProductions 3 года назад

Great channel man, subbed.

@EastTactics 3 года назад

Awesome Brother ! Thanks for the Sub!

@gamechangerrc4633 3 года назад

Great video a friend of mine told me about your channel just subbed👊👊💯💯

@EastTactics 3 года назад

That means a lot game changer, always looked up to your renown in the industry. 😎👊

@gamechangerrc4633 3 года назад

@@EastTactics I appreciate you and will be looking forward to upcoming videos

@never-stock-rc2968 3 года назад

There are some high speed ones 3 and has the mount for the motor...

@EastTactics 3 года назад

I’m not sure I follow? Was that a question?

@never-stock-rc2968 3 года назад

@@EastTactics sorry was just saying I think it's better to build your own such as you did and I wonder where they got mounts from

@EastTactics 3 года назад

Oh no worries… I left a link in the description where I picked up my basher mounts for the ESC. ALZA racing

@stevemdelacruz5602 3 года назад

Would like to get a motor fan for my big rock

@fbiagent3399 3 года назад

you can Build same powerful esc and motor fan with mounts for about 20$... at least I can

@EastTactics 3 года назад

Nice! I assume you’ve already got a lot of the miscellaneous components. That’s awesome. I do highly recommend the specific fans I researched simply because they are both powerful and built really well. Course you can always search AliExpress for the exact same one in a single pack instead of a three pack. Thanks for watching.

@fbiagent3399 3 года назад

@@EastTactics yah i bought the same exact 1ns.. they are 5$ each on ali.. I ordered A few.. and yah I have all the little miscellaneous stuff

@EastTactics 3 года назад

You are the exact type of person I was hoping this video would impact. That’s awesome! Thx for following my content 😎👍

@cigolicious 3 года назад

AWESOME information! Do you have recommendations for 1/5th heat sink and fans? I assume that the same wiring can be used for a 1/5th scale?

@EastTactics 3 года назад

Ya, the concept of wiring is all going to be the same. I plan to drop a new video really soon that goes into more details about the wiring, nothing really new, just more of a visual breakdown. That said, I'm not really as familiar with whats available on the market for 1/5 scale vehicles. What I can tell you is that I recommend (especially if your running a BASHER) that you find a heat sink that mounts super securely, ideally one that wraps all the way around. What interesting is that the yea racing heat sink (that i plan to drop a vid on really soon where i retrofit the 40mm fan too) it comes pre set to take two 30mm fans. Anyway what I was about to say about that heat sink, is that it might actually be compatible with your larger can motor. You see... most people think that the four stub posts that it ships with are for putting under the fans. Well... thats not the case (in fact I would never recommend lifting the fans up off the heat sink with the posts, thats a sure fire way to destroy fans for a basher) Instead... those little posts, they ship 4 of them, are actually supposed to be used as a spacer between the top and bottom pieces of the mount itself, to potentially allow it to fit on larger cans. Im not saying it will fit on yours... but hey... it might. As far as what fans to use, I would still say the same fans I recommend from alliExpress would be fine. Heck maybe you could set two side by side on your motor. Either way, since i haven't done much research as far as whats available for larger cans... there might be a really nice heat sink out there, that would be better then this little yea racing heat sink that only comes pre built to hold two tiny 30 mm fan. So search Ebay, amazon, alliExpress, and just plain google for images of what might work for ya. Now regarding your ESC. again im not super familiar with mounts that are comparable with the larger ESC, my guess is that they exist. have you checked that ALZA website I referenced to se what they have? If you have a basher I would stay away from 3d printed mounts. My other thought is, have you considered just still using the same mounts and fan from the 1/8 scale ESC? will they not fit on your ESC. Just make sure that whatever set up you use for your ESC that that fan is supported directly underneath it, meaning in the center. Sorry for the overly long response. Wish I knew more about 1/5 setups.

@brutallyaverage8293 3 года назад

Supposedly xmaxx heatsink will squeaze onto most 56/58mm can motors. But honestly a fan alone is usually good for those big boi motors. My leopard 5892 barely gets warm in my xmaxx. Same motor in kraton 8s but only ran it this winter so temps are gonna be low.

@cigolicious 3 года назад

@@EastTactics can you also recommend the size fans if the differ from the 6s Kraton?

@EastTactics 3 года назад

Did you officially settle on a heat sink? If so drop a link right here so I can take a look at it.

@saltylocal6917 Год назад

Hi ET, will this fan mount and install work on Arrma Big Rock factory motor?

@EastTactics Год назад

The blx100 is 10mm smaller then the blx185. So this mount wouldn’t fit right on.

@jotcw81 3 года назад

Hm, I think alza-racing is pretty quick - the esc basher mount doesn´t have a product pic anymore on there website. Talking about copying it...

@harongibriel2991 3 года назад

Hey buddy love ur work man quick q the balance lead to the battery comes 3 wires 2 blk n one red which one should I not use?,

@EastTactics 3 года назад

that’s strange? You’re using a 3S battery correct? The 3S battery balance terminal should be comprised of four wires, one red on an outside edge, and then three black. In our use Use case you will remove thetwo center black ones. Are you powering your fans with something other than a 3S batteries? Either way...red should already be the outer most on the one side. And then use/keep the outer most black on the other side. Then just make sure that when connected, the red lines up w/red and black to outer black

@harongibriel2991 3 года назад

@@EastTactics yes and I noticed u said the same is that u cut off the 2 middle but I fan upmost swear there was o 3 wires I just checked the website I ordered it from n in the pic it shows 4 .. I’ll check when I get bk home I really appreciate ur help!!!

@shawnmalicek1189 2 года назад

Hey East tactic I purchase the Tattu battery, I have the The smart technology charging system and noticed that the battery terminal is smaller how do I charge it? Thanks

@EastTactics 2 года назад

That’s the 3S battery correct?. You simply just need to pick up a small adapter that will convert your classic EC 5 down to the smaller 3S battery. I’ll send you a link here in a few minutes for it amzn.to/3qU3jwy

@shawnmalicek1189 2 года назад

@@EastTactics thanks

@tkostang 3 года назад

Should those fans be run through a splitter with that tiny 20ga wire?

@EastTactics 3 года назад

Ya... it’s plenty thick.

@wheelieforlife4487 3 года назад

I recked my fan in my new spectrum esc/ kraton 6s v5

@EastTactics 3 года назад

Does the spectrum ESC have a similar set up as the BLX185? Meaning the same mount that one would use for the BLX 185 could also be used on the spectrum correct. I would assume so. This Fan I’m showcasing in this video would be a great alternative especially if you incorporate the shock mitigation tactics. Let me know what you go with. Thanks for watching my vid😎👍

@wheelieforlife4487 3 года назад

@@EastTactics yes it dose this is my 2nd day with it and I broke the fan just running it on the road

@EastTactics 3 года назад

Just to be clear, are you saying you broke the stock fan and you found this video because you think it would be a good alternative. Or you bought this fan that I’m showcasing in the video, and it broke. I just wanna make sure I’m not misunderstanding. I would be shocked if the fan from AliExpress I recommend here, broke.

@wheelieforlife4487 3 года назад

@@EastTactics yes

@maagneticc6470 3 года назад

Is there anywhere else to get the esc fan Mount because it’s 35-40$ for shipping to canada

@EastTactics 3 года назад

You can find a basher mount on eBay.

@maagneticc6470 3 года назад

@@EastTactics can U get me a link please?

@EastTactics 3 года назад

40mm Universal Fan Mount, BLX185, Firma 150/160, felony/infraction heat sinks www.ebay.com/itm/124688350072

@maagneticc6470 3 года назад

@@EastTactics Doesnt ship to canada gonna try to find a 3d printed one online

@keshajohnson4403 2 года назад

I make the same fans with a thermal switch for 25.00 dollars

@rcpitlane2283 3 года назад

Do you have any experience if this Fan works with 14.6 Volts?

@EastTactics 3 года назад

They are rated for 12 V, however I have heard of people running them with higher voltage )like a 4s battery. I don’t have enough experience to say exactly how much of a toll this will play on the fan life longevity. But when these fans are only five bucks or so seems to me like not a big deal to try it.

@rcpitlane2283 3 года назад

@@EastTactics Yes that's right. Thx for your reply

@HH-zg8zm Год назад

I have fan aimed at battery 🤣 Yes that can't get to hot either. I run big battery. It gets hotter on long runs you can protect your motor the electric but disrespect you lipo and your rc goes up in smoke.🤣🤣🤣🤣🤭

@mr.davidson3314 3 года назад

Hey bro I got another question it’s I want to bash with high speed gear I’m not hard bashing but lite bashing what will I need to keep engine good

@EastTactics 3 года назад

You’d be surprised how quickly your motor and ESC can get hot. Simply driving on the street, or through Grass, can you get those heats up. Especially during warmer season. Anything past the provided stock Gearing Calls for consideration of providing extra cooling. For example my V4 Kraton came with a 13t Pinion stock, and 15t high speed pinion. The moment I went to 16t just one tooth higher, I noticed my temps surpassing recommended thresholds. I actually wanted to run 18t which definitely calls for quality cooling, which is why these high power fans rock. Picking up a heat gun detector is a great idea too. Motor Ideal - 140° 60° C Hot - 150 - 160° 65.5° - 71.1° C Overheat - 165° 74°C

@mr.davidson3314 3 года назад

@@EastTactics thanks for the info bro so basically if I’m bashing leave the stock gear in not speed speed gear. I was hoping I could run speed gear and bash if I got a cooling fan and cover. Your saying I’ll heat up motor if I do. That’s the info I was needing thanks bud.

@EastTactics 3 года назад

@@mr.davidson3314 If you bash with the Stock gearing, either 13t, or 15t, you can bash to your hearts content, and shouldn't need to add additional cooling to your setup. However, if you decide to put a pinion gear past 15t, then adding cooling to your motor is recommended, especially in the hot season. Now... if you add cooling to your Motor, such as these high power 40mm fans, you can toss in a higher pinion (such as say 17T) and you should be fine... even in the summer.

@mr.davidson3314 3 года назад

@@EastTactics thank you bud for the info now I feel better bashing just get a 40mm fan and I’m good. Awesome. Just watched your video on how to install

@MrSpeeder420 3 года назад

Are these fans waterproof?

@EastTactics 3 года назад

Lol... Best way to answer your question, watch this ha ha. Time stamp 7:34 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PoAS9YxVjuc.html

@MrSpeeder420 3 года назад

@@EastTactics thats a definite yes, thanks!

@gaffle-411 3 года назад

Where can I a proper dual-fan base heatsink for a 1:5 scale Castle 2028 1100KV or 800KV? I don't see those very often.

@EastTactics 3 года назад

Man... your right, can’t seem to find a decent one. That’s annoying

@gaffle-411 3 года назад

@@EastTactics I just got the Integy 1/8 heat sink for the DBXLe. It’s skinny but fits a 56mm can perfectly + you can mount TWO 40mm fans to it. They’ll mount their inner edge onto the heatsink.

@ZediZero 3 года назад

Do you have a link for the swedish fan ? :)

@EastTactics 3 года назад

Are you referring to Thunderoos? If so… To my knowledge the only way to contact them is through Facebook messenger. Same with NTF (search NTF racing on FB) As far as links to the fan/s I recommend, that can be found in the description. Let me know if this answers your question. I think it does but I’m not really sure which country any of these fan vendors are from LOL

@saqib8033 2 года назад

Hello what are lenth of the screws?

@EastTactics 2 года назад

DIY High Power fan Project (Parts) amzn.to/2GTPpWt This link in the description takes you to a quick source for picking up the parts. I believe I have 45 mm links here. Because I implement a lot of shock mitigation, and I also started adding a small plastic washer above and below the Sorbothane. Which calls for a little bit longer screw. So if you don’t plan on doing much shock mitigation and then you can go with 40 mm

@saqib8033 2 года назад

@@EastTactics it's for a arrma infraction can email pictures if you can check it if that's ok

@BigDaddyAlien 2 месяца назад

Didn't see anything about links to product...lol

@EastTactics 2 месяца назад

You couldn’t find the link? To which product?

@TKO593 3 года назад

I have a hot racing monster blower fan and it connects directly my 6s battery. I would like to set up a game changer fan the same way. The HR fan says its 14.8vDC rated but 6s is 22.2v. What is the voltage rating on the game changers?

@EastTactics 3 года назад

They are rated at 12v and recommend to run of a 3s 11.1v battery. So your throwing 22.2v at a fan rated for 14.8? Yowza! What’s the amp output of those monster fans?

@TKO593 3 года назад

I’m not sure on amperage draw, but it’s advertised for 6s vehicle. Most likely intended for 4s voltage. It’s a 50mm fan. Hot racing monster blower fan Part#: HRAAON505F02. Look it up and see the parallel connector for the fan. I would like to hook up an upgraded fan more suited for 6s voltage in the same manner.

@EastTactics 3 года назад

That’s why I was asking about amperage. If that 50mm fan is running directly from 22.2 V 6s battery, does it sound like a tornado? Or are you seeing these GCRC fans blowing harder? I can’t believe there’s only one video on RU-vid regrading these hot racing 50mm fans, and it not even in English!

@EastTactics 3 года назад

My guess, is that these high-powered 40 mm fans put out more cooling power than that monster fan, even though they are rated at 12v. So because 3S batteries are 11.1 V output you maximize power to the 40 mm fans by using a 3S battery. I can only assume that it would probably be a bad idea at least for the long haul to run a fan that’s rated at 12 V direct from a 6S battery rated at 22.2 V. I’m sure it would work but you might burn the fan out over time. That all said if you only run one 6s battery in your vehicle, Instead of two 3S batteries. Then your best bet to take advantage of these 40 mm fans is to pick up a small 3s 850 mA battery to run these 40 mm fans. Either that or if you’ve got the ability to run your RC with 2 3S batteries, You could always run one of your fans directly into one of those charging ports.

@TKO593 3 года назад

@@EastTactics I’m not so sure about that. 50mm vs 40mm at the same speed the 50mm will move more air. The KV of the motor multiplied by voltage applied will tell you the max rpm. I’m guessing it comes down to the KV between these motors. I cant find any details on that though. I don’t want to add the weight of another battery to my rig.

@aaronpenrose9656 3 года назад

1st!

@EastTactics 3 года назад

Ya brother!! In my book too!!

@teslacybertruck750 2 года назад

All that information, and you couldn't turn them on a single time so we can see the power of the fans?

@EastTactics 2 года назад

Most likely because it’s part of a playlist. And I went over it in a different video. Sorry. This link below is saved at the exact timestamp where you’ll hear the fan. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IPGdYAP-png.html