The cheap way to fix your Vic blend door acuator 

Your patience is amazing absolutely the most clear and concise Video regarding this problem period thank you very much

I got tired of taking my air bag and glove box out each season to manually move the actuator lever. Two years ago, I installed a cable in the glove box to move it quickly. I had never tried moving the top of the dash. You have given me some confidence to maybe fix it better one day. Thanks!

I pulled my glove box down. Then I took a 12" piece of coat hanger and bent an "L" shape on the end. I slid it under the blend door actuator arm and pulled it. It went into heat mode. Hopefully in the spring I can just push the arm back to get Air conditioning. I didn't have to remove one screw. Just a flashlight was all I needed.😃

Thanks for the video. Dealer quoted me a whopping 2500$ dollars which sounds like a new record. Mines been broken for years. For anybody with an EATC who cant do the fix right away, try pushing OFF and FLOOR at the same time then pressing AUTOMATIC. This resets the EATC and (If your lucky) can result in switching to either hot or cold air once the reset is done.

Great vid...I have to do my 94 Town Car...yours is the only vid that shows how the actuator works with the the arm and rod...thanks

I've had success removing a blend door actuator (twice) by using a screw driver and splitting it in two, removing the upper half, taking out the parts and then I could reach the screws with a wrench. Then to re-install I notched the two back tabs, put the screws part way in, put in the blend door and installed the front screw. the second time it took 30 mins, start to finish. There's a video on here of another guy showing how to break the blend door actuator in parts which was very helpful.

Thanks for the video...the struggle is real, I have this issue sometimes the AC blows hot air and I do the Floor, Off, Automatic reset till the 24-25 code comes up then hit the Defrost button that works now but prior to that I had to drop the glove box and was able to turn the little knob, forgot what I used but hard on the hand but it worked....

As a fellow Scottsman, I feel your pain... literally! My 2004 Vick LX needs the actualtor replaced! But being a Frugal Scotsman, I've got the actuator pried up and a wedge to hold the door closed for A/C and in the winter months I'll flip it to Heat :) And I'm left handed so this job really Suchs!

UHHGGG. Now I know why my mechanic just quoted me $550 to do this. :/ . Not something I could do personally. Appreciate the video.

For some people who are reporting issues with air only coming out the defrost vent need to take a look at a you tube fix that shows how to replace orings that are in the control panel. I have easily fixed strange a/c and heat issues in a 95 town car and 99 marquis using this method. On the marquis, a shop was saying i had blend door issues which turned out to not be true

For future , they make ratchets that the handle is actually the ratchet and you can spin it back and forth for stuff like that it came in handy when I had to do them at ford.

Thanks for the video. I was successful, but I can't believe pulling the entire dash forward is HARDER! This was a tough job. Bad part was I bought a replacement actuator, and it was defective. Paid my local garage to replace it and then I put it all back together. This took a lot of time, but it can be done for sure. Like standing on your head and licking your elbow!

Wow, great tutorial!

Excellent video!!! Thank You 😉 I hope mine never goes bad…?

Basically same thing happened to me with my ranger, last bolt was mostly loose and i dropped my only ratchet that actually fit behind the dash, so i resorted to violence and smashed the last bolt out but ripped a bit of the ducting out, just went and got some aluminum foil tape and patched the small hole when i installed the new actuator, two bolts in the front are no issue with a ratcheting wrench but that back one was hell.

Nice work.

good job!

I work for snapon, and we don't have one of those Liams available yet.

Awesome video thank you so much

They sell low profiel socket sets that might help with this fix.

Does anyone know if this will help me get my front defroster back?

I had this same issue found the thing that changes the ac fan controls (idk what its called) and I pushed it all the way in and pulled it all the way out on vent mode, it fixed the issue for how long I dunno but hey it worked kinda

Love your videos keep it up ❤❤❤

Thanks Mike 👍👍👍👍

Subscribed 😆👍🏽

Curious what system are you using for your camera equipment? (Head Strap and particular camera? ) Thanks

trying to push my actuator lever to A/C it’s raised past the lever but won’t budge no matter how hard i hit it or push it i

When the blend door fails, is it when you only get air thru one duct system! Upper or lower?

Thank you bro 🙏

A shop in Ladner recently did my blend door system. Was a annoyance that was. Now I have a dead gauge cluster, apparently a common issue on the Panthers. You had that yet?

I wish it wasn't so difficult, I'm gonna have to pay someone to fix mine. I have health issues. Mine has stripped gears or missing teeth causing it to start blowing warm air, I'm in west Texas, need ac

Bro not everyone has a "Liam" around to help on the difficult stuff.

You moved the dash backwards, not forwards (of course).

Done ... miserable ... but done.

Easier to slide the dash forward.

There’s no way these mitts can do that

easier to just pull the dash, you were already basically there, 4 nuts to drop the column and 2 or 3 more bolts holding dash in and its out lol