The Complete Walk-Around of a DECKED OUT 4x4 - Range Rover P38

Подписаться 6 тыс.

Просмотров 11 тыс.

50% 1

G’day!
Join me in a vid for all-times. It’s been over 5 years since we last too an honest, in-depth look at the Range Rover P38. It’s a tough 4x4 that’s definitely earned it’s keep. I’ve chosen the most beautiful place to pull up and give you a look around.
Don’t forget to Subscribe if you’re new here, and head over to the socials to catch more of the stuff in between these videos. @chillingwithkeithy on Facebook and @keithy_wager on Instagram.
Grab a beer, sit back and enjoy the vid!
#4x4 #tour #australia #beach #4wd #sanddriving #offroad
Cheers
Keithy

Авто/Мото

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@robertlaundy4176 Год назад

Another Great video Keithy, Thanks for the update and all the trouble you go to making them 👍 Hope your doing OK and keeping well. Take Care. Cheers Rob and Shelly 👍

@Keithy_W Год назад

Thanks guys! Really appreciate it. I hope you are both doing well 👍🏻

@Area-hu2xt 9 месяцев назад

I got me one of them. And wouldn’t swap it for anything. Not even a plastic new one. Awesome tool. 💪

@eliedaher9141 4 месяца назад

great job man, you seem like a great guy. wishinng you the best

@Keithy_W 4 месяца назад

Thanks mate, much appreciated 👍🏻

@Aceclassics100 Год назад

G’day Keithy, good to see the update on the Rangie. Great that you still love it after lots of years too. .....and that sure is a lovely quiet beach you’re on. Cheers, Alan

@alistairstewart8216 Год назад

Keithy, you're looking and sounding great! Thank you for continuing to make and post your videos.

@Keithy_W Год назад

Thanks mate, I really appreciate it 👍🏻

@erikiversen4497 Год назад

Nice to see another update on the Range Rover 😊

@Keithy_W Год назад

My pleasure 👍🏻

@Td5Adventures Год назад

Very nice video! Thanks for taking the time to show everything in detail and sharing some inspiration.

@Keithy_W Год назад

Thanks mate! Appreciate it 👍🏻

@jamesprosser6766 9 месяцев назад

Hi Keithy, love your set up. Do you have any photos on the rear wheel carrier installation?

@Keithy_W 9 месяцев назад

Thanks mate 👍🏻 I don’t have any pics of the install sorry! It’s been about 10 years since I even had a look at the carrier internally!

@maccas44 Год назад

Good on ya Keithy great video, great to see you up and about keep up the good work mate stay well

@Keithy_W Год назад

Thanks mate! Appreciate it 👍🏻

@Telferb Год назад

Love to see your Range Rover still going strong.

@Keithy_W Год назад

She’s a solid old horse 😂

@Telferb Год назад

@@Keithy_W you mentioned in your video that you often take it through deep water. I've read many reports about the BECM getting wet when you go through water - what have you done to prevent this?

@Keithy_W Год назад

Good question mate! I wish I could post a photo on this conversation! I soaked my BECM this time last year. I’ve done absolutely nothing to prevent it getting wet, and as you see, my P38 operates and drives 100% as it should. After I got out of the water crossing (recovery), I drove 100km, removed the BECM and cleaned and re-fitted it with all systems unharmed.

@Telferb Год назад

@@Keithy_W obviously they are more robust than what many say. 🙄 I guess the moral of the story is if you keep on top to the maintenance, they are as reliable as the next. I've only owned mine for 18 months and have been going on a few club trips as I learn what it's capable of. Thank you for your guidance

@Keithy_W Год назад

You’re not wrong mate. They are robust. Never have I been towed anywhere in a P38 in the near-20yrs I’ve been driving them. I believe a lot comes down to maintaining them well, and listening to its quirks. I’ve towed many Toyota’s and Nissan’s in my time. A good battery, good fuel and regular maintenance. Perfect 👌🏼 That’s good to hear mate. You’ll enjoy it! Comfortable and capable motoring. So long as you listen to it, you’ll keep a reliable P38.

@gordonwedman3179 Год назад

On my 99 that plastic T on the top inlet to the radiator broke causing me to loose most of my coolant. I would be worried about weakening it by adding that temperature sensor. Plan to make a metal version one of these days.

@Keithy_W Год назад

Good idea!

@Area-hu2xt 9 месяцев назад

You don’t need spacers. The air sus has a ride height setting you can’t set. At full ride height when traversing awkward territory, if the air sus detects the chassis is grounding, the height is raised another two inches automatically and then drops again if no further groundings of the chassis is detected. Although I suspect you already know that.

@fenflyer Год назад

Nice 4x4 👍

@Keithy_W Год назад

Thanks evSteve 🤘🏼

@Area-hu2xt 9 месяцев назад

Sorry meant to mention. Front tyres at 28psi. Rear tyres at 38psi regardless of tyre type for the road.

@michaelnoyes4817 Год назад

Love it, have a look at truck Donaldson air cleaners, they have a drain rubber that allowsvwater to self drain but won't allow water in(self opening and closing)

@Keithy_W Год назад

Thanks mate, I’ll check that out for sure! Do you have any links?

@michaelnoyes4817 Год назад

If you search Donaldson air cleaners you'll see them on the bottom of the housing, they go from round to flat, ill see if mine in the shed still has 1 that i can upload a pic for you tomorrow

@Keithy_W Год назад

Thanks mate, sounds great 👍🏻

@kabaottoemulsion1869 Год назад

It sounds like P38 RR is quite reliable truck...? I want one for daily !

@Keithy_W Год назад

They’re reasonably reliable 4wds! It’s handy to know how they operate before buying, they’re not everyone’s cup of tea 😁

@bernardmccann7676 Год назад

Have a snorkel on mine no problem it’s an OEM snorkel from Landrover

@patrickjohnston5705 7 месяцев назад

Was your air sus system bypass a kit or a homemade thing? (If so where did you get it). Got a p38 myself and the air suspension is the only thing I don’t fully trust😂

@Keithy_W 7 месяцев назад

Completely home made mate. I wrote the design on three sheets of A4 paper, got it lazer cut, welded together and then went about installing. It was first installed in my old blue P38 in 2011, which I retuned to standard when I sold it, and then put the lift into this current P38 in 2015. It may take time, but it pays to learn how the EAS works. It’ll help you diagnose when needed. Keeping an eye on things allows you to catch things before they become an issue. They’re reliable, but they do require maintenance.

@benrumsey6155 Год назад

Hey mate, love the truck! Have you done anything to protect the BECM under the driver's seat from water?

@Keithy_W Год назад

Thanks Ben! Appreciate it 👍🏻 I have done nothing to the BECM, it sits there and has accepted its share of water over the years!

@konstantinevacheishvili1362 Год назад

Thank you for your videos! Could you please give us some tips about roof racks and rack bars? Which rack bars are suitable for p38? Thank you!

@Keithy_W Год назад

My pleasure mate 👍🏻 I could knock up a video on roof racks and bars if you’d like. There are so many out there, it’s easy to get lost between them! Do you have any roof rails on the roof at the moment?

@konstantinevacheishvili1362 Год назад

@@Keithy_W Yeah that would be great, thanks. That's right I'm kinda lost. I need something heavy duty. Don't have no bars no brackets, and I think about making DIY brackets, but no info yet.

@campbellbeckhurst579 Год назад

Hey mate looking at getting a rangie myself where'd you get your locker from?

@Keithy_W Год назад

G’day mate, mine is an Ashcroft locker, and I have it in the rear axle. I got it direct from Ashcroft in the UK. Sent here (including freight) it was cheaper than an ARB locker, and the Ashcroft also engages more securely than an ARB too. They also don’t get air leaks. Cheers Keithy