Range Rover P38 # 054 - Complete Brake Bleeding

Подписаться 6 тыс.

Просмотров 41 тыс.

50% 1

If you'd like to support this channel, sign up for Honey and earn points and money when you shop online:
www.joinhoney.com/ref/kkc03c0
According to the Land Rover workshop manual the complete bleeding process contains a pretty decent amount of steps. We'll perform these today, and I do recommend being two persons. One inside the car and one going around to each wheel and the brake reservoir. Here's the complete workshop steps:
drive.google.com/open?id=15W7...
The process takes about 20 minutes with the wheels off and an assistant. Thanks wife!
You'll just need a few items:
Brake bleeding bottle like:
www.amazon.co.uk/Draper-Tools...
10mm (calipers) and 11mm (master cylinder) spanners.
At least 1 liter (34 oz) of DOT4 brake fluid. I drained about 7 dl (24 oz), but it was closer to a liter (34 oz) the last time I did it.
An assistant with a printed copy of the workshop procedure, and a well charged start battery on your vehicle.
You can reach me at gamuso@gmail.com if you want to get in touch with me, or follow me on Twitter: / 0ddj4rl3
Please consider subscribing. And as always please comment below and I'll respond as best as I can.
Thanks for watching, and I hope you found this video interesting.

Авто/Мото

Опубликовано:

9 май 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@richarddoherty8034 4 года назад

Very helpful! Thank you. I followed your procedure carefully after installing new front brake pads and replacing the entire rear brake components. No issues at all, except the ABS light remained on for the first mile of driving. It went off and all is good with my '02 P38. I couldn't have been so successful without this instruction. Keep it up please. These vehicles are becoming classics...

@Land_Raver Год назад

You are a national treasure. Thank you so much for putting these videos out.

@uscmack5300 7 месяцев назад

This channel is a life saver for me and my P38. Thanks for taking the time to do these videos!

@jessicajohansen5935 4 года назад

Love your video's - really helpful. You are a P38 Star!

@vanslowlee2186 2 года назад

Excellent video again thank you helping me so much with my p38 👍

@piusobeng5330 2 года назад

Very grateful with your teaching experience

@pcezar1 4 месяца назад

Simple, huh! Thanks for this, very helpful 👌🏻

@jetspearo 5 месяцев назад

Super helpful, thanks for this video. Love your work :)

@chrisfleming5109 6 лет назад

Very good video, extremely helpful and clear instructions which are easy to understand and follow. Top man.

@WorkOnP38 6 лет назад

Thanks for watching Chris. Appreciate the positive feedback. Glad I was able to communicate it well.

@ned900 Год назад

Great video, many thanks, so useful.

@carolynatkinson9553 3 года назад

excellent video may be answer to my problem on 1992 p38 abs light problem thank you

@romanrob 5 лет назад

Well done mate, all your vids are great

@WorkOnP38 5 лет назад

Thanks for watching and the kind feedback romanrob!

@Blackburnferret 4 года назад

well put together this video thankyou for your time and help

@WorkOnP38 4 года назад

Glad it can be of help, Ashley. Thanks for watching!

@Joeanders702 2 года назад

Thanks so much in UAE🇦🇪 first time to fix

@neillee-edmunds715 5 лет назад

Once again a great video! Have just bled the brakes on my son's P38. Watched this first, made notes and followed your instructions. Very pleased. Your videos give me the confidence to have a go at jobs that I would not normally do. I am no mechanic but have had some success following your lead. Thanks

@WorkOnP38 5 лет назад

Great to hear back from viewers like yourself. I'm thrilled to hear that you attempt to do things like this. Thank you so much for the kind feedback. I'm just happy if someone finds the videos useful. I'm no expert either, but just have this as an hobby like most of you viewers. Thanks for watching and for taking time to write comments!

@ZX600E7 4 года назад

Just to add, if its a right hand drive car, you start on the front right, then front left, rear right then rear left.

@Martin_IPL5990 5 лет назад

Very, very useful indeed. well done.

@WorkOnP38 5 лет назад

Thanks for watching, Martin! Glad you found it useful. Have a peaceful christmas.

@khndenmark 6 лет назад

Nice video, hope to see informative videos from you.

@WorkOnP38 6 лет назад

Hi and thanks so much for the positive feedback. I'll soon have more videos coming. Thanks for watching!

@eliasfelix2828 4 месяца назад

Sim Senhor , Boa dica.

@mohamedaburwiss2259 4 года назад

It's very nice to see like this video .thanks

@WorkOnP38 4 года назад

Thanks for that, Mohamed. And thanks for watching!

@peterlyon9941 6 лет назад

very good proper job

@WorkOnP38 6 лет назад

Thanks Peter. It helps having the factory workshop manual and follow it which is usually what I do with most my projects.

@alexhamling7677 4 месяца назад

A great video as always! Does it matter what brand of Dot 4 brake fluid you top up with?

@tamero52 3 года назад

Thank you for your useful videos. As a P38 owner, I am very glad. Have you ever had your brake booster or ABS pump repaired? I think these vehicles have really complicated braking system. what do you think?

@asomind 3 года назад

Amazing video as usual. For a fluid replacement, as per your instruction, is it enough to replace "repeat until there's no bubbles" with "repeat until new fluid comes out" ? Tak

@idrisroket7563 5 лет назад

хороший канал! не понимаю что говорит но понимаю что делает!) поменял свой УАЗ ПАТРИОТ на pegas p38! пегас хорошая машина ! просто супер!

@sedatincesu 2 года назад

Hello sir. I have a 96 p38 and after low brake oil presure warning my service add liquid to system but today morning i felt brake loose and open the system i saw a big leak and brakes loose and loose more. Can you give me advise please. Regards

@wilsonmunene4417 4 года назад

Followed the laid out step by step but the pump goes on after every second press on the peddle what could be the issue

@hazeltate6614 3 года назад

👍🏻👍🏻👍🏻

@yilmazmacit Год назад

👍

@eccosabanovic1589 Год назад

..i have seen plenty of brake bleeding videos and i never saw that they bleeding from master cylinder...is this specific for P38 or other videos just skipping important steps?

@RicardoSalinasFournier 5 лет назад

Hi! Nice video. 3 days ago I replaced my accumulator. The air in the accumulator automatically go out of the system doing the bleed procedure? Because I read a case who fill up the accumulator with brake fluid before installing it. And I don’t know the times or the correct operation of the accumulator and the pump. Can you help me :( ? Approximately for how brakes application before the pump runs again. And how long time. Sorry for my bad English. Your videos are awesome!

@WorkOnP38 5 лет назад

Hi Ricardo. The workshop manual does not say to fill the accumulator, just replace it (and the rubber o-ring). The air will go out of the accumulator if you do the complete bleed procedure. Please see the workshop manual (pdf) linked in the description. It explains the steps, and how many times you need to perform them. The important part is just to make sure that only fluid comes out and no air bubbles. There's no exact number of times, it just depends on where the air is in the system. You will easily hear the pump run and stop. I probably did each bleed screw 4-5 times, and the second time 2-3 times. But it will vary for each vehicle. Good luck! Thanks for watching and your feedback :)

@MrJborbon 3 года назад

Que complicado , por qué diablos lo complicaron tanto ?

@recastmimarlk1761 4 года назад

Dear sir I watched all your videos and thank you for them. May I ask you . When ignition on my abs pump run and never stop. I changed my brakes and by the way I couldn’t drive car at least 6 years closed in the garage. I changed my battery and motor oil and brake fluid in dash panel tc and abs faults

@WorkOnP38 4 года назад

Might be the ABS pressure sensor in the pump, or bad connection somewhere. I think a code reader would help you verify any errors in the ABS system and determine the cause. Thanks for watching!

@timmermansbram2728 2 года назад

Thanks for sharing ! Question.. do u have any idea where to add clutch fluid after repair? Some have a addingpoint above the clutch pedal, mine doesn't and seems to be connected to the healing circuit.. though IT is seperated. Please help me out. Greets Bram

@timmermansbram2728 2 года назад

*healing circuit=Breaking circuit

@idrisroket7563 5 лет назад

я кайфую от пегаса только электрика есть всякая лишняя!

@RockySectionAdventures 6 лет назад

all was going well and clear until I got to the rear brakes and both bleeding nipples were completely dry and I could see that there has not been brake fluid in the rear calipers for years. Any ideas what could cause this?

@WorkOnP38 6 лет назад

Hi and thanks for watching. Sorry for the delay in response since I've been on vacation. I'd guess either a congested / bent line or stuck valves in the valve block under the brake reservoir would cause this. Could be electrical also. I believe you can run a test program using for instance something like the Hawkeye Diagnostics and perhaps many other solutions as well. That way you can verify if the valves are operating properly at least. The rear brake lines are independent from the hydraulic valve block though so I'm suspecting the issue is at the valve block. Maybe take off the lines going rear there (and the calipers) and try to blow compressed air to get any debris out if any.

@RockySectionAdventures 6 лет назад

Thanks for the response, I appreciate the help. I'll do as you said and see if I can fix it. cheers.

@pistonbroke0461 5 лет назад

Rocky Section Adventures did you manage to find out what the problem was?

@rangeroverp3846 5 лет назад

Great video, what size pipe do I need to go over the bleed nipples?

@WorkOnP38 5 лет назад

Hi, and thanks for watching. I'm not 100% sure, but I believe they are 1/4" or 6mm inner diameter. Hope it helps.

@roofdownfun 4 года назад

Hi, I cant find the pdf you mentioned on the video, is there any way you can get it to me so I can bleed my brakes please? Tom

@WorkOnP38 4 года назад

Hi, I just tried the bleeing pdf link in the video description and it still works. Thanks for watching!

@fabioandrian2202 4 года назад

Hello Mister, first of all sorry for my bad English. All my compliments for your precious work; one question if you could kindly help me. My brake pedal have a very strange behaviour; when I press the pedal kick back my foot and the car stop in a very rude manner; after this first press the second press is normal in the next couple of minutes, then the "Kick back" appears again. I've tried a complete bleeding as your video, but no changes..Any idea will be very appreciated. Thanks anyway and compliments again. Fabio From Italy

@WorkOnP38 4 года назад

Hi Fabio. I'm thinking maybe the ABS system somehow puts pressure back at the pedal. Maybe a bad seal somwhere. However I'd check the fourms like rangerovers.net and landyzone.co.uk to see if anyone else has had the same issue. It's a new one for me so sorry I can't help much. Good luck and thanks for watching!

@fabioandrian2202 4 года назад

@@WorkOnP38 Hello and Thank you for your attention kind reply: eventually I've solved changing the Abs pump, probably it has some kind of a no return valve built inside that failed. 60 pounds for a used one from UK and all solved!