The Cooler Master NR200P V2 is your next ITX/SFF case 

I feel like Cooler Master took all the feedback and said "Nah, fam. We good". People asked for better compatibility for AIO's (being able to mount it at the top and not only on the side) and now AIOs are basically the only option for optimal CPU cooling . People asked for USB-C and now you gotta manage an extra thick cable in the same space. People LOVED that you could do horizontal GPU in a SFF case and now vertical is your only option AND because of this you lose a SSD spot at the front which limits the storage capacity of the case immensely. The uselessness of the TG panel comment is spot on because NO ONE will want to choke their GPU with it. I know the outake overall is that the case is good and all but as someone who didn't buy the V1 (which has spiked in price now) waiting for the V2, I'm very disappointed.

I love how you give both the usd and aud pricing, some other aus channels just say usd which is annoying for Aussie viewers. Especially those that want to support Aussie made content. Great vid man!

I really like this case, thanks for the review, stay awesome

Thank you for checking the bottom fan mounts, knowing that both can be 25mm is great.

Great review! I have the Cooler Master NR200P MAX with an AMD 7700 and Nvidia 3090ti. I put two 120mm by 15mm fans on the bottom firing up. Runs great!

Request granted. Thanks Nick you're the best.

I’m very happy that you often show wether or not the biggest GPU’s like the Strix can fit. This is often an overlooked visual that other RU-vidrs don’t do. in my opinion, it’s very important because that way people will be able to see what the biggest components are that you can fit in a certain small form factor. Because sometimes only knowing the max length of a GPU is not enough to know whether or not, it can actually fit, as it can sometimes be a little bit tricky to get the GPU in or sometimes the GPU will not fit at all because of the thickness or the way it’s built even though the GPU length is within the limits of the case Furthermore, I think it’s important so people have a better assurance that their smaller GPU’s will also fit the case

Can't wait for this to be released in New Zealand. Gonna do my first AM5 build in it.

Great video. Please be sure ro add the partpicker list. Thanks!❤

Your video convinced me to make this my first itx case. I was able to squeeze in a TUF 7900 XTX. Some tips, loosen the radiator screws when assembling the top, ribbon cables are a pita, I switched to the asus Loki and it worked out better routing the gpu cable through the front (this gave me room for the 280 aio tubes), lastly I made said Asus SFX-L fit on the SFX mounting point to clear the 280 aio. Tnx and cheers!

Nicely done. Nothing for an air cooled only SFF builder.

16:25 I think we all done that a few times. Made me laugh as well. lol I bought this case a few days ago off amazon. Hope to do a similar build in it. thanks!

This is the case I wish I could buy few year ago, at least the NR200P MAX was out. The only advice I would give for this case is don't forget to put fans at the bottom.

(smart people) drill holes into the plexiglass panel and enjoy the extra dust lol. Great video, thank you very much! Was having a hard time finding something to fit my PNY RTX 4070 Ti Super 16GB

Great review

I have seen a few reviewers say this should have been called the NR200 Liquid, and I agree, it’s not a v2 it’s a Max without the included accessories.

as an owner of NR200 Max, i appreciate for this video. was thinking if it's different too much or not. Thanks!

*inhales deeply* I love a good itx case in the morning

If they included another bracket for horizontal GPUs the case would be so much better.

Man I’ve been itching to build a new SFF PC. NR200P was a blast to build in specially if you have a 3d printer

Thanks for another clear and entertaining post. What's the air cooler clearance if you used an igpu? And what's your opinion on that?

Great music mix for the build, Miss the wifes voice for a sponsor and i always enjoy seeing bindi modeling with the final build at the end.. lol.. thanks for the video.

Finally! Thank you!

Wish they made a vertical version, with normal GPU slot. Mini-ITX towers with IO on the top make so much sense.

Great Video.

They finally made room for bottom fans, and finally put USB-C on the front! I just wish the USB-C port was in a different spot, but I know they did that for symmetry, lol.

The fact the ROG Strix card fits inside here has sold me almost instantly

I'm loving my NR200P Max. With a Ventus 2X RTX 4070Ti Super. I have no issue using a tempered glass cover. Probably I'm using this desktop solely for creator. Revit, D5 Render and Premier. The new NR200P casing is tempting to give my old Max new look. Great review.

Thanks for the video, great detail, exactly why I subscribed to this channel. I have both the Max and the original NR200P, the latter is running my main PC as it just was the best of the bunch. As other comments have pointed out, forcing AIOs is so bad - why not make the backpanel modular, like in the original NR200P, to allow for horizontal AND vertical GPU mounting. Vertical GPU mounting without riser in an SFF case WAS one of the main features of this case lineup. The only thing holding the original NR200P back was the inner front panel cutouts being to small. I had to deshroud my 4090 to get it in there. They made things worse by introducing too many changes. They only needed to do to things: * Remove the inner front panel entirely and replace it with two modular add-ins for people who want to mount harddrives there - so that people can use only one for vertical GPU mounts and two for horizontal. * Make the AIO top mountable, for 280 maybe slightly increase the height of the case, but do NOT sacrifice the whole case concept for that AIO (lowering the board mount, screwing horizontal mounts, screwing air cooling folks, etc.) They should have done more research in their user base. Get the original NR200P and a dremel is what I would recommend, then you can mount your gpu however you want. And if you still want top AIO, people have done that two with a slim rad and slim fans - without any height or mainboard mount adjustments. Honestly, their customers have through mods shown them how to make the V2 - the research was already done.

I think the top panel is also different, the NR200P Max has the original mounts for the 2x120mm fans of the Original NR200P where as the new V2 is completly open and only uses the mounts of the frame.

Would be cool if you can do total transplant into the new case and do the benchmarking to see any delta

That red strix is beautiful

I built in the NR200P and I think I still prefer that one for having the horizontal GPU option. I also managed to fit a 280 AIO by using the side mount. Temps were good. Only reason I went back to ATX is the need to use a PCI capture card. I would still use this though if I can’t get a hold of the first one.

I’ve liked and subscribed!

Thanks!

Always the amazing tunes, big compliments! The NR200PV2 is nice too, I guess. Great case, the NR200P is a modern classic and the Max was solid, this is great if you want the Max but want to use your own parts? I think getting an old NR200P is much better value because it's so much cheaper and I'm actually not that big a fan of AIO's in small cases. (For reference my current pc is in an air cooled DAN A4 H20)

I’ve work on the case. One of the major problem was that the not all 240mm aio fit the case bc of the tube hitting the psu. Specially the lian li Galahad ii. Wish they gave a little more inch of space then it would’ve been good or alright atleast 👍

Came for the case review, stayed for the Bindi footage.

Very nice video ! I have a question, have you tried with a 280 radiator on top of it ? Thanks you !

Very nice.

I now want to change my nr200p for this one😆

I loved the cat, from argentina!

So the NR200P Max Lite. Got it. I do want to see the TG thermals though. That's a main point for vertical mount IMO. With the bottom 120s maybe it's not that bad? Also wondering if exhaust/intake on the bottom fans would change thermals significantly or not.

it really is just a refresh of the nr200p max, unfortunate that they left out the budget builders for this one

outstanding

I don't really know who this is for since the max already exists. I personally would have asked for either space for a liquid cooler on top or a slightly wider NR200 so that I could use the TG panel with a wider variety of air coolers.

Just waiting for the pc part picker list.

I love that the card fits in here. Do you think a 280mm rad would have been a no go considering the small gap already present near the PSU?

Solid follow up. There was a time when the NR200 and the TU150 were basically the best cases for ITX on the market. Luckily we have more chassis now. IMO the NR200 was better, BUT if the TU150 fit all your parts and was good enough thermals for your build, nothing really beats the build quality of a Lian Li chassis. The biggest issue with the TU was cooling and restrictions on parts sizes. The NR200 on release was more budget friendly, "good enough" build quality, AND amazing parts compatibility.

NR200P > NR200P V2

The lack of a USB Type C on the front panel is what has my original NR200 still sitting in its box, unopened since December. It may see eBay very soon!

Is it possible to fit in a Arctic liquid freezer 2 or 3 AIO? 240 or 280?

I built in this just over the last few days and it was eh. Bought a large number of parts trying to figure out what I wanted to go with, and this one was severely limiting. Couldn't use the Arctic Liquid Freezer III 280 (too thick) or DeepCool LT520 because of the pump height, so ended up going with an EK Nucleus 240, but the tubing for that is short, so you can't route it under the PSU shroud so it just sits against the PSU and GPU, and with an SFX-L PSU, it's basically unable to use any AIO other than the Cooler Master one. The USB and USB-C cables are extremely thick and do not bend well, the front panel connector was extremely short, so routing it was not possible, it just had to be pulled straight to the pins on the board as a result, the TG panel is useless because yes, let me lose basically all my cooling intake, vertical only GPU puts the GPU right against the case side, venting the hot air straight into the case and CPU radiator. Added 2 exhaust fans to the bottom for negative pressure and to try and pull some of the hot GPU air out of the bottom, but temps for both still just hovered right in the 70-80 range. Overall...I was able to complete a build, but it was extremely disappointing. I ended up with a Lian Li A4-H2O, which also resulted in lower temps (CPU sits around 60, GPU at 70 under gaming load), smaller footprint, and fit all the parts I had. This case just seems like "we had a lot of stock left, so made a new I/O panel for the top and labeled it V2!" and shipped the same case with a new USB-C port. It was a major disappointment.

I’m just curious about to fit MSI AI1300p there. 😎

which direction is better to set the air flow? suck it in from the top through the AIO and blow it out from the bottom? Can it be the other way around, suck it in through the dock and blow it out through Aio?

Yes please I need a pc part picker list

I don't like riser cables, they are just another component you have to buy (PCie 5.0 riser will be very expensive when they come out) and can cause errors. That is why I like the normal NR200P. My NR200P has the optimal airflow, side intake with AIO for CPU VRAM and M.2 cooling and a Nvidia Founders with flowthrough that gets exhausted to the top and back... I also have 3 SSDs in the front...the third is just dangling in there. :D

Just give me a drill and some metalworking tools, I'll get this rackmounted.

Finished transferring my parts to my X-Gamerx P60, almost brought a NR200 but needed modding for mATX, just couldn't find what I wanted then my search engine posted the P60 on screen, had to get it on Aliexpress. RU-vid video never happen, the transfer didn't go smoothly, operator error, but in the end everything fine. Cable management was a pain, run the RBG to the wrong header and the 24pin and GPU cables have too much length on them, so I try making some custom cables. If I had a long GPU it don't think it would fit if the x16 was at the top, because of PSU cables.

Nick! Since you are so close with Cooler Master team, Could you help them design the Air Cool version? The max support Height should be around 160mm would nice. Hope you read my comment mate!

15:42 LOL they way you said that On the case, I don't know any other itx cases that can fit that big of a gpu. I think this is a good case. I know people wsnted more air cooler options, i hope they do add that but air cooling seems limited to me if you want big GPU like a rog 4090

Ever put together a pcpartpicker list for this? Trying to decide if I can fit standard 120mm fans with an Sfx-l and 280mm AIO

classic "hand in the gpu fan" trick at 16:25 😉

I have the V1, gpu is plugged straight into mobo, (so it’s horizontal,) and big air cooler above the gpu, in front of mobo. Very nice case, solid, recommended The riser cable supplied was not compatible with my gpu, and I didn’t want to fork out £80 for a riser cable, as it wasn’t required.

It didnt understand the part about the bottom fans in the video. Are you saying you can use two 25mm fans? or only one slim fan under the riser cable and one 25mm beside it?

Geer Seeker, will you do less known case brands? I've been eyeing this case called Tecware VX90M, can't build a pc yet with my situation but atleast I can fantasize while you build and show case it. Much love! ❤

No, my next SFF case is sitting behind me on the other desk and waiting for the final decision on how to position the PSU. Its half the volume (10L), and originally not built for liquid cooling. Also weights half of the NR200 v2. Sandwich-layout from the very beginning, and also all in white.

Of course the GPU knob would be black... Wonder if the GPU knobs will be color matched with other case color variants.

Isn't it the same layout as NR200P Max? I though i heard you say you can fit 2 25 mm fans at the bottom . I'm pretty sure you coudlnt in the MAX variant

Anyone have the Phanteks SFX PSU? If so, do your original cables slightly push on the GPU on the NR200P (non Max)? Am considering getting CableMod flex cables (have a Tuf 3070) to see if it helps.

Will the pny xlr8 4080 super fit fine with the tempered glass version

CM site doesn't mention DTX mobo compatibility with the V2 edition.

So, what are you recommending the older version if one's budget restricts the build to it being air cooled?

I wish u did gpu test with tg..4090 might be a huge card but for me i prefer to have a mid tier gpu in this case..i wonder how the temp will be especially with those dual 120 fans on bottom..

is it possible to fit both 3.5 hdd and large gpu like 3090 at the same time?

2 steps forward 1 step back lets facelift an already good case but take away its air cooler orientation wtf🤦‍♂

Would be nice for them to upgrade the AIO cooler to also be more competitive with the newer 2024 AIO liquid coolers

Will they have one like the max with psu ect installed?

Cooler master did good? Lol this is a step back in basically every way from the V1 other than the type C port. The V1 was very popular for one specific reason. Versatility, and the V2 doesn't have that.

That's a No from me. Still gonna grab an Asus P200 or whatever its called. Got more room for air cooling. I don't fux with water stuff.

With cases like this, I always wonder if coolers like the Arctic Liquid Freezer line will fit, given that the radiators are thicker than normal.

Is the GPU nub needed in vertical orientation?

what type of fans have you used on the bottom?

No horizontal GPU sent me looking for a V1 instead. Cooler Master dropped the ball.

What cables did you use for the psu?

I thought in the NR200P Max you couldn't fit two 25mm 120mm fans in the bottom? Maybe a slight change with the V2 to fit them under the GPU?

Also which AIO is that I tried and can’t fit my AIO

I love the inclusion of the cat back scratcher! Hope it becomes a regular 😺

TG panel would be alright if you were only doing a 4060 or something eh Would really love to see them do a air cool v2 version... maybe a mesh front ?

So basically what you’re saying is I need to buy a V2 and replace the rear panel with the panel from my V1 and call it a day!

Is it better to mount bottom fans for intake either for exhaust?

What about the gigabyte 4090 gaming OC?

I actually skipped over this case specifically because they removed all the interesting color options from the NR200. Ended up going with a Fractal Ridge instead.

Does it support a 3.5" HDD? That will determine if I buy it

Which direction did you set up the fans? Lower for intake and upper for exhaust?

Why doesn't this case have an option for a *sandwich mounting solution?* As in a center spine in the middle with the motherboard on one side with the power supply, and on the flip side the GPU with a flat radiator pump combo, the FE 3000 or 4000 water cooled leaves you with a lot of space after it. And if you modify the spine & mount the sandwich center spine a little higher you would be able to have dual 360 radiators with fans. And then you would want tempered glass on both sides. Do they offer tempered glass for both sides? *Replacement back I/O case panel & adding a center spine isn't hard, take mins if you had a CnC, or knock it out old school with a router table by hand... & cut a bunch of threads for new screws.* You'll have zero room to hide any extra wiring so this is best done by you by just shorting all of the cables you need that the power supply comes with, just do one wire at a time & make them perfect. ...measure twice, cut, strip, crimp, next. ..all of your cables will be only a few inches long. While you're add it, learn how to bend glass tubing. Just know EKWB fittings are 12.7mm OD before buying any glass tubing. ...and when I say learn, look up how they make neon signs with the use of your lungs to add pressure to the glass tubes so they do not fold in on you. ...this technique can also be used on plastic tubing and once you learn it makes complicated multi bend lines so much easier. btw if you look around you can find glass tubing cheaper than plastic, AND there is NOTHING that looks better than glass.

But can you fit an ATX mobo in it?

How is it compared to DAN-A4-H2O?

what fan did you used under?

I run an SFF build in my bedroom using the A4 H2O case and it’s been great and really have no reason to change anything. NGL though, I kinda wanna get this case and swap everything over to it. Decisions decisions.