The Crafting Table totally knows what the next update will be. 😂 

I didn't saw that coming

@@elithzy I SAW it coming

I SAW what you did there @promasterytjava

Ridiculous you say?

do you mean 'see'? by that context, you are implying that you saw what they did but now you are confused. edit: no i am not a nerd i am siri

Yes , yes you are.

not a woodcutter is it

that's a diamond encrusted saw

@@Mr._cringebut you don’t craft it with diamond

Ah, but stonecutters can't change wood. This could be the wood version

*scissors* not _pliers_

​@MatthewR4981 I was abot to reply saying that dang it

true dat

@@HalfBreadOrder hehe

​@@MatthewR4981 why would they be scissors?

Came down to say this lol, gravity pulls the top part to the side where the cut was made

I don't think you guys saying this have actually (properly) cut down trees or watched it being done. Loggers felling trees know how to set a cut up so that it goes towards a removed V-shaped section, but both sides are usually cut in that type of felling. There are three primary cuts in total, two for the V, and the back-cut is last, so the tree falls...AWAY from the saw, on purpose. Nothing good comes from a tree falling towards a saw or the person using it. Either the saw or user may easily be mangled by that happening. The falling tree should release the saw immediately when the remainder starts cracking off. There is a newer way, but that involves a big vehicle with a claw that grabs the whole top of the tree while a single chainsaw slice is made. If and which way it falls from there is up to the operator.

@@VoltisArt Phoenix didn't use any of those methods though

​@@everettw.9610😂

-how did you know im in australia for vacation-

Finally, no more excessive amounts of wooden stairs when I wanna make them

@@bluesky_cupy5158 indeed..

We could use it to do a new slab

@@T.U.P.Y.0 🤔🤔🤔

just copying terraria.

Part 2 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XBwwTsS2FF0.html

I sure do love bots under my comments m

Being dislecsic is a gift

Sans lol? Maybe start with the AUs right off the bat? Why bother (joke)

*_MEGALOVANIA_*_ intensifies_ btw

No it wouldn't. Trees fall in the direction being cut because when being cut, more unbalanced weight is put on the parts not cut yet, causing it to tilt to that side, think of a straw half cut then you tape a metal ball to the top, the weight of the ball will make the start bend towards the part not cut yet as the part that is cut is able to lift up so there no reason for the weight to go there. Plus if trees went opposite of where they are cut, then cutting trees would be seen as more dangerous than it is

@Jjo_Han-wen I guess the angle of cut would have a role in which way it would fall as well as the shape of the tree. If the center of gravity(CoG) wasn't in line with the tree stump, it would fall in whatever direction the CoG is to the stump... I think

@@noahcarlisle4470 no, it is more common for a tree to fall the opposite direction of the saw, as the part cut is relieved of stress it practically is like a really slow moving rubber band snapping. And in the case the tree might have too much weight on one side from branches and such, they either try to cut where the weight would help the best with pulling the tree down or they try to add weight to the desired direction they plan to have it fall when cutting. But a normal tree typically falls away from the cut

Felling a tree usually involves three cuts, not one. Two remove a V-shaped section on the heavier side of the tree, if there seems to be a heavier side. (Experience and examination help here.) The last cut (called the back cut) is on the back side, allowing the tree to safely fall away from the saw and person using it. If you can't tell or easily control the weight by removing limbs, a rope or strap being pulled would be the most common way to control the direction the tree falls, rather than adding weight.

@@Jjo_Han-wen it quite literally is not, why do you think people yell TIMBER when the tree is falling, because it’s more likely to be pulled towards an area it can fill, which is, surprise surprise, where the saw is.

We also need to pay close attention to you too

Part 2 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XBwwTsS2FF0.html

Hmmm mine is black... it's made of wood...

Well we got the fleching table target block..

Time to overanalyze the frying table

Sans

Bro has a stack of likes

True

@@Imaghost97 Yeah, it can’t be a mace if minecraft didn’t have maces back when the crafting table was added.

@@jacob13-yv7cv Minecraft had hammers when the crafting table was added?

@@VoltisArt Not the original sprite.

Nerd

cool idea but for some reason i don't think of the saw as a medieval tool

YES SIRRRR

vertical slabs, not half slabs, that would be a quarter of a block

slabs, they are slabs

​@@alexpresso243Precisely, it keeps cutting down, halves quarters eighths, you better not be too creative when building your home or else the game might crash lmao

I NEED MOJANG DEVELOPERS TO JUST CHANGE THE ORIENTATION OF A BLOCK BY 90 DEGREES PLEASE

I thought those things were scissors

Sheares

Clean maces can be dangerous while dirty hammer can be safe

Mace Windu isn't a hammer (i think)

Get out

@@AquaQuokka at least I was crafty

@@Theoneandonly9038please stop

I wood but I got no wood left

SHEER HAMMER SAW nice

Well you got what ya wished for

I saw that joke coming already come on

Send it to the bottom!

@@squalhardt3514 I'm saddened

Nobody saw this coming

Moyang needs to send a small Crafting table teaser

Crazy how no one thinks it's tongs for metal work

@TeodoraTacderen lol

@TeodoraTacderen what...is that a girlie bot😏

Jake Chadnow- Moon Men

Its a gun

same

I always thought why on earth a crafting table would need a saw

I saw what you did.

bro stuck in 2021

:•|

Please delete this comment

o_o

That's not very skibidi toilet of you

Now thAt my gUy is smart

Literally exactly what I was thinking 😂