The EASIEST Way To Add 1/2" LIFT To Your 5th Gen 4Runner or Correct Drivers Side Lean

Подписаться 18 тыс.

Просмотров 8 тыс.

50% 1

In this video I will take you through the process of adding top plate spacer(s) to gain a half inch lift. This can help to level, correct drivers side lean, or just gain more lift on your 5th Gen 4Runner.
What I used:
1/2" Lift (x2 spacers) - amzn.to/4aC4NzW
Drivers Side Lean (x1 spacer) - amzn.to/3W4bPsx
Thanks for watching!
As an Amazon Associate, I earn commission from qualifying purchases at no extra charge to you. Thank you for your support!

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@KingSev Год назад

I was in the same boat, I already did this 2 weeks ago, keep the videos coming my man! Good job, very good , high quality content ! Good job 👏

@T4Rgarage Год назад

Thanks so much Sev!!!

@rob4f258 Год назад

I needed this. I installed a king set up with 3inch lift. I have a little rake in the front. Im currently measuring 22.1/2 in the front...and 23 3/4 in the rear. Hopefully this levels it

@T4Rgarage Год назад

It worked for me. Getting the shock in and out can be a pain in the butt, I’d recommend having someone help you to push down on the lower control arm with their foot while you pull up on the spindle. Hope it goes well

@donnelson4140 3 месяца назад

Thanks, I needed that.

@g.fortin3228 11 месяцев назад

Love the look with the front higher, one thing to consider is getting the back high enough to get back a little bit of rake, so when you load up the back it's not squatting. Anything to avoid ANY squat look LoL !!!

@T4Rgarage 11 месяцев назад

Yes! I like a bit of rake and absolutely hate the squat look. Serves no purpose

@g.fortin3228 11 месяцев назад

@@T4Rgarage Right exactly.. I did the front 5100 and it was perfect level, but at times looks like it's a slight lower in the rear, depending on where I'm parked and what angle you look from.. Just ordered 1" cornfed rear spacers, with lean correction. they are going on next weekend LoL -5th gen army green, ORP.

@T4Rgarage 11 месяцев назад

@@g.fortin3228 nice! I eventually ended up going with HD coils in the back. When we went out this summer fully loaded with the drawer box, armor, rtt, the back was sitting pretty low. Working on a dual swing out steel bumper at the moment as well. It rides pretty rough but I think it will be perfect once the bumper is on and loaded up for adventures

@ecmortgage1 2 месяца назад

Going back to this video post, What do you think about adding 1/2” Spacers on to a coilover like BP-51s? Instead of maxing out the preload adjustment? Or adjusting it higher than recommendation which could be “detrimental” to the suspension system.

@perrylamb6286 Год назад

That's a great video. Thanks. After adding a low profile winch mount and winch, the rake is a bit more pronounced. I think I'm going to, at some point, just replace my shocks and coils with new adjustable shocks and coils. I had those on my OLD Jeep Wagoneer.

@T4Rgarage Год назад

Thank you! I think I will as well

@taeka-d9o 6 месяцев назад

Great video as always! Got my 16 4runner Sr5 2WD.. can I use this to lift my front? Thank you so much

@joebagodonutssummertime8267 5 месяцев назад

Great video. I am going to put the 1" cornfeds in there, do I need to add a 1/4 to level it on the drivers side as well?

@teachthestory Год назад

Great video! Appreciate your content. If someone has adjustable coilovers, can we just adjust the driver's side front and back that way instead of the spacer?

@T4Rgarage Год назад

Thank you! If you have adjustable coilovers you would usually only need to adjust the front drivers side to correct the lean. Park on a flat surface, measure each side, and adjust from there

@donv9648 Месяц назад

Can this still be done if I already have a front level spacer lift installed?

@2-old-Forthischet Год назад

Seems like a lot of effort for a half inch of lift, especially when it looks like you already have an aftermarket upper control arm.

@ChristopherSmith-rn4wd 9 месяцев назад

Thanks for showing this ,i just purchased a 2023 sr5 premium and it has the left lean ,do i just put the spacer on the left front nothing on the left rear

@T4Rgarage 9 месяцев назад

I would get it on flat ground and measure each side and compare to see if it’s the front or back that has the lean. You can correct the lean by putting a spacer in the back, the rear would be the easiest and you can get a 1/2” spacer to correct it

@VideoSampler Год назад

you are measuring it wrong from center, measure from the bottom of rim (not wheel)

@chadjoneslsu 5 месяцев назад

All I know is if im under the car I better just get the best parts so I ai t wasting my time down there😂😂😂

@CKYOUTDOORS 11 месяцев назад

How is the ride quality? Been driving with my og 5th gen lifted 2.5 ome with 265/70r17 17x8.5 -10mm rims, relaxing my car front end is slightly lower then the rear, I’m considering on doing this too.

@T4Rgarage 11 месяцев назад

Ride quality is unchanged. It’s a bit challenging to manoeuvre the sway bar, UCA, and cv. But with a bit a patience you’ll be good 👍🏼